bs3-fpustate-1-template.c@ 72372

Last change on this file since 72372 was 69111, checked in by vboxsync, 7 years ago
(C) year
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 12.0 KB

Line
1	/* $Id: bs3-fpustate-1-template.c 69111 2017-10-17 14:26:02Z vboxsync $ */
2	/** @file
3	* BS3Kit - bs3-fpustate-1, C code template.
4	*/
5
6	/*
7	* Copyright (C) 2007-2017 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*
17	* The contents of this file may alternatively be used under the terms
18	* of the Common Development and Distribution License Version 1.0
19	* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
20	* VirtualBox OSE distribution, in which case the provisions of the
21	* CDDL are applicable instead of those of the GPL.
22	*
23	* You may elect to license modified versions of this file under the
24	* terms and conditions of either the GPL or the CDDL or both.
25	*/
26
27
28	/*********************************************************************************************************************************
29	* Header Files *
30	*********************************************************************************************************************************/
31	#include <iprt/asm.h>
32	#include <iprt/asm-amd64-x86.h>
33	#include <VBox/VMMDevTesting.h>
34
35
36	/*********************************************************************************************************************************
37	* Defined Constants And Macros *
38	*********************************************************************************************************************************/
39
40
41	#ifdef BS3_INSTANTIATING_CMN
42
43	/**
44	* Displays the differences between the two states.
45	*/
46	# define bs3FpuState1_Diff BS3_CMN_NM(bs3FpuState1_Diff)
47	BS3_DECL_NEAR(void) bs3FpuState1_Diff(X86FXSTATE const BS3_FAR pExpected, X86FXSTATE const BS3_FAR pChecking)
48	{
49	unsigned i;
50
51	# define CHECK(a_Member, a_Fmt) \
52	if (pExpected->a_Member != pChecking->a_Member) \
53	Bs3TestPrintf(" " #a_Member ": " a_Fmt ", expected " a_Fmt "\n", pChecking->a_Member, pExpected->a_Member); \
54	else do { } while (0)
55	CHECK(FCW, "%#RX16");
56	CHECK(FSW, "%#RX16");
57	CHECK(FTW, "%#RX16");
58	CHECK(FOP, "%#RX16");
59	CHECK(FPUIP, "%#RX32");
60	CHECK(CS, "%#RX16");
61	CHECK(Rsrvd1, "%#RX16");
62	CHECK(FPUDP, "%#RX32");
63	CHECK(DS, "%#RX16");
64	CHECK(Rsrvd2, "%#RX16");
65	CHECK(MXCSR, "%#RX32");
66	CHECK(MXCSR_MASK, "%#RX32");
67	# undef CHECK
68	for (i = 0; i < RT_ELEMENTS(pExpected->aRegs); i++)
69	if ( pChecking->aRegs[i].au64[0] != pExpected->aRegs[i].au64[0]
70	\|\| pChecking->aRegs[i].au64[1] != pExpected->aRegs[i].au64[1])
71	Bs3TestPrintf("st%u: %.16Rhxs\n"
72	"exp: %.16Rhxs\n",
73	i, &pChecking->aRegs[i], &pExpected->aRegs[i]);
74	for (i = 0; i < RT_ELEMENTS(pExpected->aXMM); i++)
75	if ( pChecking->aXMM[i].au64[0] != pExpected->aXMM[i].au64[0]
76	\|\| pChecking->aXMM[i].au64[1] != pExpected->aXMM[i].au64[1])
77	Bs3TestPrintf("xmm%u: %.16Rhxs\n"
78	" %sexp: %.16Rhxs\n",
79	i, &pChecking->aRegs[i], &pExpected->aRegs[i], i >= 10 ? " " : "");
80	}
81
82
83	#endif /* BS3_INSTANTIATING_CMN */
84
85
86	/*
87	* Mode specific code.
88	* Mode specific code.
89	* Mode specific code.
90	*/
91	#ifdef BS3_INSTANTIATING_MODE
92	# if TMPL_MODE == BS3_MODE_PE32 \
93	\|\| TMPL_MODE == BS3_MODE_PP32 \
94	\|\| TMPL_MODE == BS3_MODE_PAE32 \
95	\|\| TMPL_MODE == BS3_MODE_LM64 \
96	\|\| TMPL_MODE == BS3_MODE_RM
97
98	/* Assembly helpers: */
99	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_InitState)(X86FXSTATE BS3_FAR pFxState, void BS3_FAR pvMmioReg);
100	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_Restore)(X86FXSTATE const BS3_FAR *pFxState);
101	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_Save)(X86FXSTATE BS3_FAR *pFxState);
102
103	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_FNStEnv)(void BS3_FAR *pvMmioReg);
104	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_MovDQU_Read)(void BS3_FAR *pvMmioReg);
105	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_MovDQU_Write)(void BS3_FAR *pvMmioReg);
106	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_FMul)(void BS3_FAR *pvMmioReg);
107
108
109	/**
110	* Tests for FPU state corruption.
111	*
112	* First we don't do anything to quit guest context for a while.
113	* Then we start testing weird MMIO accesses, some which amonger other things
114	* forces the use of the FPU state or host FPU to do the emulation. Both are a
115	* little complicated in raw-mode and ring-0 contexts.
116	*
117	* We ASSUME FXSAVE/FXRSTOR support here.
118	*/
119	BS3_DECL_FAR(uint8_t) TMPL_NM(bs3FpuState1_Corruption)(uint8_t bMode)
120	{
121	/* We don't need to test that many modes, probably. */
122
123	uint8_t abBuf[sizeof(X86FXSTATE)*2 + 32];
124	uint8_t BS3_FAR *pbTmp = &abBuf[0x10 - (((uintptr_t)abBuf) & 0x0f)];
125	X86FXSTATE BS3_FAR pExpected = (X86FXSTATE BS3_FAR )pbTmp;
126	X86FXSTATE BS3_FAR *pChecking = pExpected + 1;
127	uint32_t iLoop;
128	uint32_t uStartTick;
129	bool fMmioReadback;
130	bool fReadBackError = false;
131	BS3PTRUNION MmioReg;
132
133
134	# undef CHECK_STATE
135	# define CHECK_STATE(a_Instr) \
136	do { \
137	TMPL_NM(bs3FpuState1_Save)(pChecking); \
138	if (Bs3MemCmp(pExpected, pChecking, sizeof(*pExpected)) != 0) \
139	{ \
140	Bs3TestFailedF("State differs after " #a_Instr " (write) in loop #%RU32\n", iLoop); \
141	bs3FpuState1_Diff(pExpected, pChecking); \
142	Bs3PitDisable(); \
143	return 1; \
144	} \
145	} while (0)
146
147	/*
148	* Setup the test.
149	*/
150
151	/* Make this code executable in raw-mode. A bit tricky. */
152	ASMSetCR0(ASMGetCR0() \| X86_CR0_WP);
153	Bs3PitSetupAndEnablePeriodTimer(20);
154	ASMIntEnable();
155	# if ARCH_BITS != 64
156	ASMHalt();
157	# endif
158
159	/* Figure out which MMIO region we'll be using so we can correctly initialize FPUDS. */
160	# if BS3_MODE_IS_RM_OR_V86(TMPL_MODE)
161	MmioReg.pv = BS3_FP_MAKE(0xffff, VMMDEV_TESTING_MMIO_BASE - _1M + 16);
162	# elif BS3_MODE_IS_16BIT_CODE(TMPL_MODE)
163	MmioReg.pv = BS3_FP_MAKE(BS3_SEL_VMMDEV_MMIO16, VMMDEV_TESTING_MMIO_BASE - _1M);
164	# else
165	MmioReg.pv = (uint8_t *)VMMDEV_TESTING_MMIO_BASE;
166	# endif
167	if (MmioReg.pu32[VMMDEV_TESTING_MMIO_OFF_NOP / sizeof(uint32_t)] == VMMDEV_TESTING_NOP_RET)
168	{
169	fMmioReadback = true;
170	MmioReg.pb += VMMDEV_TESTING_MMIO_OFF_READBACK;
171	}
172	else
173	{
174	Bs3TestPrintf("VMMDev MMIO not found, using VGA instead\n");
175	fMmioReadback = false;
176	MmioReg.pv = Bs3XptrFlatToCurrent(0xa7800);
177	}
178
179	/* Make 100% sure we don't trap accessing the FPU state and that we can use fxsave/fxrstor. */
180	g_usBs3TestStep = 1;
181	ASMSetCR0((ASMGetCR0() & ~(X86_CR0_TS \| X86_CR0_EM)) \| X86_CR0_MP);
182	ASMSetCR4(ASMGetCR4() \| X86_CR4_OSFXSR /\| X86_CR4_OSXMMEEXCPT/);
183
184	/* Come up with a distinct state. We do that from assembly (will do FPU in R0/RC). */
185	g_usBs3TestStep = 2;
186	Bs3MemSet(abBuf, 0x42, sizeof(abBuf));
187	TMPL_NM(bs3FpuState1_InitState)(pExpected, MmioReg.pb);
188
189
190	/*
191	* Test #1: Check that we can keep it consistent for a while.
192	*/
193	g_usBs3TestStep = 3;
194	uStartTick = g_cBs3PitTicks;
195	for (iLoop = 0; iLoop < _16M; iLoop++)
196	{
197	CHECK_STATE(nop);
198	if ( (iLoop & 0xffff) == 0xffff
199	&& g_cBs3PitTicks - uStartTick >= 20 * 20) /* 20 seconds*/
200	break;
201	}
202
203	/*
204	* Test #2: Use various FPU, SSE and weird instructions to do MMIO writes.
205	*
206	* We'll use the VMMDev readback register if possible, but make do
207	* with VGA if not configured.
208	*/
209	g_usBs3TestStep = 4;
210	uStartTick = g_cBs3PitTicks;
211	for (iLoop = 0; iLoop < _1M; iLoop++)
212	{
213	unsigned off;
214	uint8_t abCompare[64];
215	uint8_t abReadback[64];
216
217	/* Macros */
218	# undef CHECK_READBACK_WRITE_RUN
219	# define CHECK_READBACK_WRITE_RUN(a_Instr, a_Worker, a_Type) \
220	do { \
221	off = (unsigned)(iLoop & (VMMDEV_TESTING_READBACK_SIZE / 2 - 1)); \
222	if (off + sizeof(a_Type) > VMMDEV_TESTING_READBACK_SIZE) \
223	off = VMMDEV_TESTING_READBACK_SIZE - sizeof(a_Type); \
224	a_Worker((a_Type *)&MmioReg.pb[off]); \
225	if (fMmioReadback && (!fReadBackError \|\| iLoop == 0)) \
226	{ \
227	a_Worker((a_Type *)&abCompare[0]); \
228	Bs3MemCpy(abReadback, &MmioReg.pb[off], sizeof(a_Type)); \
229	if (Bs3MemCmp(abReadback, abCompare, sizeof(a_Type)) != 0) \
230	{ \
231	Bs3TestFailedF("Read back error for " #a_Instr " in loop #%RU32:\n%.Rhxs expected:\n%.Rhxs\n", \
232	iLoop, sizeof(a_Type), abReadback, sizeof(a_Type), abCompare); \
233	fReadBackError = true; \
234	} \
235	} \
236	} while (0)
237
238	# undef CHECK_READBACK_WRITE
239	# define CHECK_READBACK_WRITE(a_Instr, a_Worker, a_Type) \
240	CHECK_READBACK_WRITE_RUN(a_Instr, a_Worker, a_Type); \
241	CHECK_STATE(a_Instr)
242	# undef CHECK_READBACK_WRITE_Z
243	# define CHECK_READBACK_WRITE_Z(a_Instr, a_Worker, a_Type) \
244	do { \
245	if (fMmioReadback && (!fReadBackError \|\| iLoop == 0)) \
246	{ \
247	Bs3MemZero(&abCompare[0], sizeof(a_Type)); \
248	off = (unsigned)(iLoop & (VMMDEV_TESTING_READBACK_SIZE / 2 - 1)); \
249	if (off + sizeof(a_Type) > VMMDEV_TESTING_READBACK_SIZE) \
250	off = VMMDEV_TESTING_READBACK_SIZE - sizeof(a_Type); \
251	Bs3MemZero(&MmioReg.pb[off], sizeof(a_Type)); \
252	} \
253	CHECK_READBACK_WRITE(a_Instr, a_Worker, a_Type); \
254	} while (0)
255
256	# undef CHECK_READBACK_READ_RUN
257	# define CHECK_READBACK_READ_RUN(a_Instr, a_Worker, a_Type) \
258	do { \
259	off = (unsigned)(iLoop & (VMMDEV_TESTING_READBACK_SIZE / 2 - 1)); \
260	if (off + sizeof(a_Type) > VMMDEV_TESTING_READBACK_SIZE) \
261	off = VMMDEV_TESTING_READBACK_SIZE - sizeof(a_Type); \
262	a_Worker((a_Type *)&MmioReg.pb[off]); \
263	TMPL_NM(bs3FpuState1_Save)(pChecking); \
264	} while (0)
265	# undef CHECK_READBACK_READ
266	# define CHECK_READBACK_READ(a_Instr, a_Worker, a_Type) \
267	CHECK_READBACK_READ_RUN(a_Instr, a_Worker, a_Type); \
268	CHECK_STATE(a_Instr)
269
270
271	/* The tests. */
272	CHECK_READBACK_WRITE_Z(SIDT, ASMGetIDTR, RTIDTR);
273	CHECK_READBACK_WRITE_Z(FNSTENV, TMPL_NM(bs3FpuState1_FNStEnv), X86FSTENV32P); /** @todo x86.h is missing types */
274	CHECK_READBACK_WRITE( MOVDQU, TMPL_NM(bs3FpuState1_MovDQU_Write), X86XMMREG);
275	CHECK_READBACK_READ( MOVDQU, TMPL_NM(bs3FpuState1_MovDQU_Read), X86XMMREG);
276
277	/* Using the FPU is a little complicated, but we really need to check these things. */
278	CHECK_READBACK_READ_RUN(FMUL, TMPL_NM(bs3FpuState1_FMul), uint64_t);
279	pExpected->FOP = 0x7dc;
280	# if ARCH_BITS == 64
281	pExpected->FPUDP = (uint32_t) (uintptr_t)&MmioReg.pb[off];
282	pExpected->DS = (uint16_t)((uintptr_t)&MmioReg.pb[off] >> 32);
283	pExpected->Rsrvd2 = (uint16_t)((uintptr_t)&MmioReg.pb[off] >> 48);
284	# elif BS3_MODE_IS_RM_OR_V86(TMPL_MODE)
285	pExpected->FPUDP = Bs3SelPtrToFlat(&MmioReg.pb[off]);
286	# else
287	pExpected->FPUDP = BS3_FP_OFF(&MmioReg.pb[off]);
288	# endif
289	CHECK_STATE(FMUL);
290
291	/* check for timeout every now an then. */
292	if ( (iLoop & 0xfff) == 0xfff
293	&& g_cBs3PitTicks - uStartTick >= 20 * 20) /* 20 seconds*/
294	break;
295	}
296
297	Bs3PitDisable();
298	return 0;
299	}
300	# endif
301	#endif /* BS3_INSTANTIATING_MODE */
302

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/ValidationKit/bootsectors/bs3-fpustate-1-template.c@ 72372

Download in other formats: