bs3-fpustate-1-template.c@ 89146

Last change on this file since 89146 was 83329, checked in by vboxsync, 5 years ago
ValKit/bs3-fpustate-1: amd adjustments.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 14.0 KB

Line
1	/* $Id: bs3-fpustate-1-template.c 83329 2020-03-19 13:08:23Z vboxsync $ */
2	/** @file
3	* BS3Kit - bs3-fpustate-1, C code template.
4	*/
5
6	/*
7	* Copyright (C) 2007-2020 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*
17	* The contents of this file may alternatively be used under the terms
18	* of the Common Development and Distribution License Version 1.0
19	* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
20	* VirtualBox OSE distribution, in which case the provisions of the
21	* CDDL are applicable instead of those of the GPL.
22	*
23	* You may elect to license modified versions of this file under the
24	* terms and conditions of either the GPL or the CDDL or both.
25	*/
26
27
28	/*********************************************************************************************************************************
29	* Header Files *
30	*********************************************************************************************************************************/
31	#include <iprt/asm.h>
32	#include <iprt/asm-amd64-x86.h>
33	#include <VBox/VMMDevTesting.h>
34
35
36	/*********************************************************************************************************************************
37	* Defined Constants And Macros *
38	*********************************************************************************************************************************/
39
40
41	#ifdef BS3_INSTANTIATING_CMN
42
43	/**
44	* Displays the differences between the two states.
45	*/
46	# define bs3FpuState1_Diff BS3_CMN_NM(bs3FpuState1_Diff)
47	BS3_DECL_NEAR(void) bs3FpuState1_Diff(X86FXSTATE const BS3_FAR pExpected, X86FXSTATE const BS3_FAR pChecking)
48	{
49	unsigned i;
50
51	# define CHECK(a_Member, a_Fmt) \
52	if (pExpected->a_Member != pChecking->a_Member) \
53	Bs3TestPrintf(" " #a_Member ": " a_Fmt ", expected " a_Fmt "\n", pChecking->a_Member, pExpected->a_Member); \
54	else do { } while (0)
55	CHECK(FCW, "%#RX16");
56	CHECK(FSW, "%#RX16");
57	CHECK(FTW, "%#RX16");
58	CHECK(FOP, "%#RX16");
59	CHECK(FPUIP, "%#RX32");
60	CHECK(CS, "%#RX16");
61	CHECK(Rsrvd1, "%#RX16");
62	CHECK(FPUDP, "%#RX32");
63	CHECK(DS, "%#RX16");
64	CHECK(Rsrvd2, "%#RX16");
65	CHECK(MXCSR, "%#RX32");
66	CHECK(MXCSR_MASK, "%#RX32");
67	# undef CHECK
68	for (i = 0; i < RT_ELEMENTS(pExpected->aRegs); i++)
69	if ( pChecking->aRegs[i].au64[0] != pExpected->aRegs[i].au64[0]
70	\|\| pChecking->aRegs[i].au64[1] != pExpected->aRegs[i].au64[1])
71	Bs3TestPrintf("st%u: %.16Rhxs\n"
72	"exp: %.16Rhxs\n",
73	i, &pChecking->aRegs[i], &pExpected->aRegs[i]);
74	for (i = 0; i < RT_ELEMENTS(pExpected->aXMM); i++)
75	if ( pChecking->aXMM[i].au64[0] != pExpected->aXMM[i].au64[0]
76	\|\| pChecking->aXMM[i].au64[1] != pExpected->aXMM[i].au64[1])
77	Bs3TestPrintf("xmm%u: %.16Rhxs\n"
78	" %sexp: %.16Rhxs\n",
79	i, &pChecking->aRegs[i], &pExpected->aRegs[i], i >= 10 ? " " : "");
80	}
81
82
83	#endif /* BS3_INSTANTIATING_CMN */
84
85
86	/*
87	* Mode specific code.
88	* Mode specific code.
89	* Mode specific code.
90	*/
91	#ifdef BS3_INSTANTIATING_MODE
92	# if TMPL_MODE == BS3_MODE_PE32 \
93	\|\| TMPL_MODE == BS3_MODE_PP32 \
94	\|\| TMPL_MODE == BS3_MODE_PAE32 \
95	\|\| TMPL_MODE == BS3_MODE_LM64 \
96	\|\| TMPL_MODE == BS3_MODE_RM
97
98	/* Assembly helpers: */
99	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_InitState)(X86FXSTATE BS3_FAR pFxState, void BS3_FAR pvMmioReg);
100	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_Restore)(X86FXSTATE const BS3_FAR *pFxState);
101	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_Save)(X86FXSTATE BS3_FAR *pFxState);
102
103	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_FNStEnv)(void BS3_FAR *pvMmioReg);
104	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_MovDQU_Read)(void BS3_FAR pvMmioReg, void BS3_FAR pvResult);
105	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_MovDQU_Write)(void BS3_FAR *pvMmioReg);
106	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_MovUPS_Read)(void BS3_FAR pvMmioReg, void BS3_FAR pvResult);
107	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_MovUPS_Write)(void BS3_FAR *pvMmioReg);
108	BS3_DECL_NEAR(void) TMPL_NM(bs3FpuState1_FMul)(void BS3_FAR pvMmioReg, void BS3_FAR pvNoResult);
109
110
111	/**
112	* Tests for FPU state corruption.
113	*
114	* First we don't do anything to quit guest context for a while.
115	* Then we start testing weird MMIO accesses, some which amonger other things
116	* forces the use of the FPU state or host FPU to do the emulation. Both are a
117	* little complicated in raw-mode and ring-0 contexts.
118	*
119	* We ASSUME FXSAVE/FXRSTOR support here.
120	*/
121	BS3_DECL_FAR(uint8_t) TMPL_NM(bs3FpuState1_Corruption)(uint8_t bMode)
122	{
123	/* We don't need to test that many modes, probably. */
124
125	uint8_t abBuf[sizeof(X86FXSTATE)*2 + 32];
126	uint8_t BS3_FAR *pbTmp = &abBuf[0x10 - (((uintptr_t)abBuf) & 0x0f)];
127	X86FXSTATE BS3_FAR pExpected = (X86FXSTATE BS3_FAR )pbTmp;
128	X86FXSTATE BS3_FAR *pChecking = pExpected + 1;
129	uint32_t iLoop;
130	uint32_t uStartTick;
131	bool fMmioReadback;
132	bool fReadBackError = false;
133	bool fReadError = false;
134	BS3PTRUNION MmioReg;
135	BS3CPUVENDOR const enmCpuVendor = Bs3GetCpuVendor();
136	bool const fFastFxSaveRestore = RT_BOOL(ASMCpuId_EDX(0x80000001) & X86_CPUID_AMD_FEATURE_EDX_FFXSR);
137	//bool const fFdpXcptOnly = (ASMCpuIdEx_EBX(7, 0) & X86_CPUID_STEXT_FEATURE_EBX_FDP_EXCPTN_ONLY)
138	// && ASMCpuId_EAX(0) >= 7;
139
140	# undef CHECK_STATE
141	# define CHECK_STATE(a_Instr) \
142	do { \
143	TMPL_NM(bs3FpuState1_Save)(pChecking); \
144	if (Bs3MemCmp(pExpected, pChecking, sizeof(*pExpected)) != 0) \
145	{ \
146	Bs3TestFailedF("State differs after " #a_Instr " (write) in loop #%RU32\n", iLoop); \
147	bs3FpuState1_Diff(pExpected, pChecking); \
148	Bs3PitDisable(); \
149	return 1; \
150	} \
151	} while (0)
152
153	/*
154	* Setup the test.
155	*/
156
157	/* Make this code executable in raw-mode. A bit tricky. */
158	ASMSetCR0(ASMGetCR0() \| X86_CR0_WP);
159	Bs3PitSetupAndEnablePeriodTimer(20);
160	ASMIntEnable();
161	# if ARCH_BITS != 64
162	ASMHalt();
163	# endif
164
165	/* Figure out which MMIO region we'll be using so we can correctly initialize FPUDS. */
166	# if BS3_MODE_IS_RM_OR_V86(TMPL_MODE)
167	MmioReg.pv = BS3_FP_MAKE(0xffff, VMMDEV_TESTING_MMIO_BASE - _1M + 16);
168	# elif BS3_MODE_IS_16BIT_CODE(TMPL_MODE)
169	MmioReg.pv = BS3_FP_MAKE(BS3_SEL_VMMDEV_MMIO16, VMMDEV_TESTING_MMIO_BASE - _1M);
170	# else
171	MmioReg.pv = (uint8_t *)VMMDEV_TESTING_MMIO_BASE;
172	# endif
173	if (MmioReg.pu32[VMMDEV_TESTING_MMIO_OFF_NOP / sizeof(uint32_t)] == VMMDEV_TESTING_NOP_RET)
174	{
175	fMmioReadback = true;
176	MmioReg.pb += VMMDEV_TESTING_MMIO_OFF_READBACK;
177	}
178	else
179	{
180	Bs3TestPrintf("VMMDev MMIO not found, using VGA instead\n");
181	fMmioReadback = false;
182	MmioReg.pv = Bs3XptrFlatToCurrent(0xa7800);
183	}
184
185	/* Make 100% sure we don't trap accessing the FPU state and that we can use fxsave/fxrstor. */
186	g_usBs3TestStep = 1;
187	ASMSetCR0((ASMGetCR0() & ~(X86_CR0_TS \| X86_CR0_EM)) \| X86_CR0_MP);
188	ASMSetCR4(ASMGetCR4() \| X86_CR4_OSFXSR /\| X86_CR4_OSXMMEEXCPT/);
189
190	/* Come up with a distinct state. We do that from assembly (will do FPU in R0/RC). */
191	g_usBs3TestStep = 2;
192	Bs3MemSet(abBuf, 0x42, sizeof(abBuf));
193	TMPL_NM(bs3FpuState1_InitState)(pExpected, MmioReg.pb);
194
195
196	/*
197	* Test #1: Check that we can keep it consistent for a while.
198	*/
199	g_usBs3TestStep = 3;
200	uStartTick = g_cBs3PitTicks;
201	for (iLoop = 0; iLoop < _16M; iLoop++)
202	{
203	CHECK_STATE(nop);
204	if ( (iLoop & 0xffff) == 0xffff
205	&& g_cBs3PitTicks - uStartTick >= 20 * 20) /* 20 seconds*/
206	break;
207	}
208
209	/*
210	* Test #2: Use various FPU, SSE and weird instructions to do MMIO writes.
211	*
212	* We'll use the VMMDev readback register if possible, but make do
213	* with VGA if not configured.
214	*/
215	g_usBs3TestStep = 4;
216	uStartTick = g_cBs3PitTicks;
217	for (iLoop = 0; iLoop < _1M; iLoop++)
218	{
219	unsigned off;
220	uint8_t abCompare[64];
221	uint8_t abReadback[64];
222
223	/* Macros */
224	# undef CHECK_READBACK_WRITE_RUN
225	# define CHECK_READBACK_WRITE_RUN(a_Instr, a_Worker, a_Type) \
226	do { \
227	off = (unsigned)(iLoop & (VMMDEV_TESTING_READBACK_SIZE / 2 - 1)); \
228	if (off + sizeof(a_Type) > VMMDEV_TESTING_READBACK_SIZE) \
229	off = VMMDEV_TESTING_READBACK_SIZE - sizeof(a_Type); \
230	a_Worker((a_Type *)&MmioReg.pb[off]); \
231	if (fMmioReadback && (!fReadBackError \|\| iLoop == 0)) \
232	{ \
233	a_Worker((a_Type *)&abCompare[0]); \
234	Bs3MemCpy(abReadback, &MmioReg.pb[off], sizeof(a_Type)); \
235	if (Bs3MemCmp(abReadback, abCompare, sizeof(a_Type)) != 0) \
236	{ \
237	Bs3TestFailedF("Read back error for " #a_Instr " in loop #%RU32:\n%.Rhxs expected:\n%.Rhxs\n", \
238	iLoop, sizeof(a_Type), abReadback, sizeof(a_Type), abCompare); \
239	fReadBackError = true; \
240	} \
241	} \
242	} while (0)
243
244	# undef CHECK_READBACK_WRITE
245	# define CHECK_READBACK_WRITE(a_Instr, a_Worker, a_Type) \
246	CHECK_READBACK_WRITE_RUN(a_Instr, a_Worker, a_Type); \
247	CHECK_STATE(a_Instr)
248	# undef CHECK_READBACK_WRITE_Z
249	# define CHECK_READBACK_WRITE_Z(a_Instr, a_Worker, a_Type) \
250	do { \
251	if (fMmioReadback && (!fReadBackError \|\| iLoop == 0)) \
252	{ \
253	Bs3MemZero(&abCompare[0], sizeof(a_Type)); \
254	off = (unsigned)(iLoop & (VMMDEV_TESTING_READBACK_SIZE / 2 - 1)); \
255	if (off + sizeof(a_Type) > VMMDEV_TESTING_READBACK_SIZE) \
256	off = VMMDEV_TESTING_READBACK_SIZE - sizeof(a_Type); \
257	Bs3MemZero(&MmioReg.pb[off], sizeof(a_Type)); \
258	} \
259	CHECK_READBACK_WRITE(a_Instr, a_Worker, a_Type); \
260	} while (0)
261
262	# undef CHECK_READBACK_READ_RUN
263	#define CHECK_READBACK_READ_RUN(a_Instr, a_Worker, a_Type) \
264	do { \
265	off = (unsigned)(iLoop & (VMMDEV_TESTING_READBACK_SIZE / 2 - 1)); \
266	if (off + sizeof(a_Type) > VMMDEV_TESTING_READBACK_SIZE) \
267	off = VMMDEV_TESTING_READBACK_SIZE - sizeof(a_Type); \
268	a_Worker((a_Type )&MmioReg.pb[off], (a_Type )&abReadback[0]); \
269	TMPL_NM(bs3FpuState1_Save)(pChecking); \
270	} while (0)
271	# undef CHECK_READBACK_READ
272	# define CHECK_READBACK_READ(a_Instr, a_Worker, a_Type) \
273	do { \
274	Bs3MemSet(&abReadback[0], 0xcc, sizeof(abReadback)); \
275	CHECK_READBACK_READ_RUN(a_Instr, a_Worker, a_Type); \
276	CHECK_STATE(a_Instr); \
277	if (!fReadError \|\| iLoop == 0) \
278	{ \
279	Bs3MemZero(&abCompare[0], sizeof(abCompare)); \
280	Bs3MemCpy(&abCompare[0], &MmioReg.pb[off], sizeof(a_Type)); \
281	if (Bs3MemCmp(abReadback, abCompare, sizeof(a_Type)) != 0) \
282	{ \
283	Bs3TestFailedF("Read result check for " #a_Instr " in loop #%RU32:\n%.Rhxs expected:\n%.Rhxs\n", \
284	iLoop, sizeof(a_Type), abReadback, sizeof(a_Type), abCompare); \
285	fReadError = true; \
286	} \
287	} \
288	} while (0)
289
290	/* The tests. */
291	CHECK_READBACK_WRITE_Z(SIDT, ASMGetIDTR, RTIDTR);
292	CHECK_READBACK_WRITE_Z(FNSTENV, TMPL_NM(bs3FpuState1_FNStEnv), X86FSTENV32P); /** @todo x86.h is missing types */
293	CHECK_READBACK_WRITE( MOVDQU, TMPL_NM(bs3FpuState1_MovDQU_Write), X86XMMREG);
294	CHECK_READBACK_READ( MOVDQU, TMPL_NM(bs3FpuState1_MovDQU_Read), X86XMMREG);
295	CHECK_READBACK_WRITE( MOVUPS, TMPL_NM(bs3FpuState1_MovUPS_Write), X86XMMREG);
296	CHECK_READBACK_READ( MOVUPS, TMPL_NM(bs3FpuState1_MovUPS_Read), X86XMMREG);
297
298	/* Using the FPU is a little complicated, but we really need to check these things. */
299	CHECK_READBACK_READ_RUN(FMUL, TMPL_NM(bs3FpuState1_FMul), uint64_t);
300	if (enmCpuVendor == BS3CPUVENDOR_INTEL)
301	# if BS3_MODE_IS_16BIT_CODE(TMPL_MODE)
302	pExpected->FOP = 0x040f; // skylake 6700k
303	# else
304	pExpected->FOP = 0x040b; // skylake 6700k
305	# endif
306	else if (enmCpuVendor == BS3CPUVENDOR_AMD && fFastFxSaveRestore)
307	pExpected->FOP = 0x0000; // Zen2 (3990x)
308	else
309	pExpected->FOP = 0x07dc; // dunno where we got this.
310	# if ARCH_BITS == 64
311	pExpected->FPUDP = (uint32_t) (uintptr_t)&MmioReg.pb[off];
312	pExpected->DS = (uint16_t)((uintptr_t)&MmioReg.pb[off] >> 32);
313	pExpected->Rsrvd2 = (uint16_t)((uintptr_t)&MmioReg.pb[off] >> 48);
314	# elif BS3_MODE_IS_RM_OR_V86(TMPL_MODE)
315	pExpected->FPUDP = Bs3SelPtrToFlat(&MmioReg.pb[off]);
316	# else
317	pExpected->FPUDP = BS3_FP_OFF(&MmioReg.pb[off]);
318	# endif
319	if (enmCpuVendor == BS3CPUVENDOR_AMD && fFastFxSaveRestore)
320	pExpected->FPUDP = 0; // Zen2 (3990x)
321	CHECK_STATE(FMUL);
322
323	/* check for timeout every now an then. */
324	if ( (iLoop & 0xfff) == 0xfff
325	&& g_cBs3PitTicks - uStartTick >= 20 * 20) /* 20 seconds*/
326	break;
327	}
328
329	Bs3PitDisable();
330	return 0;
331	}
332	# endif
333	#endif /* BS3_INSTANTIATING_MODE */
334

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/ValidationKit/bootsectors/bs3-fpustate-1-template.c@ 89146

Download in other formats: