bs3-bootsector.asm@ 86728

Last change on this file since 86728 was 83020, checked in by vboxsync, 5 years ago
bs3kit/bootsector: Restore the error mesage that was disabled for space reasons while debugging.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 15.1 KB

Line
1	; $Id: bs3-bootsector.asm 83020 2020-02-07 13:35:07Z vboxsync $
2	;; @file
3	; Generic bootsector for BS3.
4	;
5	; This sets up stack at %fff0 and loads the next sectors from the floppy at
6	; %10000 (1000:0000 in real mode), then starts executing at cs:ip=1000:0000.
7	;
8
9	;
10	; Copyright (C) 2007-2020 Oracle Corporation
11	;
12	; This file is part of VirtualBox Open Source Edition (OSE), as
13	; available from http://www.virtualbox.org. This file is free software;
14	; you can redistribute it and/or modify it under the terms of the GNU
15	; General Public License (GPL) as published by the Free Software
16	; Foundation, in version 2 as it comes in the "COPYING" file of the
17	; VirtualBox OSE distribution. VirtualBox OSE is distributed in the
18	; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
19	;
20	; The contents of this file may alternatively be used under the terms
21	; of the Common Development and Distribution License Version 1.0
22	; (CDDL) only, as it comes in the "COPYING.CDDL" file of the
23	; VirtualBox OSE distribution, in which case the provisions of the
24	; CDDL are applicable instead of those of the GPL.
25	;
26	; You may elect to license modified versions of this file under the
27	; terms and conditions of either the GPL or the CDDL or both.
28	;
29
30
31
32	;*********************************************************************************************************************************
33	;* Header Files *
34	;*********************************************************************************************************************************
35	%include "bs3kit.mac"
36	%include "iprt/asmdefs.mac"
37	%include "iprt/x86.mac"
38
39
40	;*********************************************************************************************************************************
41	;* Defined Constants And Macros *
42	;*********************************************************************************************************************************
43	;; Enabled faster loading.
44	%define BS3KIT_BOOTSECTOR_FASTER_LOAD
45	;; Enabled load progress dots.
46	%define BS3KIT_BOOTSECTOR_LOAD_DOTS
47
48
49	%ifdef __YASM__
50	[map all]
51	%endif
52
53	;
54	; Start with a jump just to follow the convention.
55	; Also declare all segments/sections to establish them and their order.
56	;
57	ORG 07c00h
58
59	BITS 16
60	CPU 8086
61	start:
62	jmp short bs3InitCode
63	db 0ah ; Should be nop, but this looks better.
64	g_OemId: ; 003h
65	db 'BS3Kit', 0ah, 0ah
66
67	;
68	; DOS 4.0 Extended Bios Parameter Block:
69	;
70	g_cBytesPerSector: ; 00bh
71	dw 512
72	g_cSectorsPerCluster: ; 00dh
73	db 1
74	g_cReservedSectors: ; 00eh
75	dw 1
76	g_cFATs: ; 010h
77	db 0
78	g_cRootDirEntries: ; 011h
79	dw 0
80	g_cTotalSectors: ; 013h
81	dw 0
82	g_bMediaDescriptor: ; 015h
83	db 0
84	g_cSectorsPerFAT: ; 016h
85	dw 0
86	g_cPhysSectorsPerTrack: ; 018h
87	dw 18
88	g_cHeads: ; 01ah
89	dw 2
90	g_cHiddentSectors: ; 01ch
91	dd 1
92	g_cLargeTotalSectors: ; 020h - We (ab)use this to indicate the number of sectors to load.
93	dd 0
94	g_bBootDrv: ; 024h
95	db 80h
96	g_bFlagsEtc: ; 025h
97	db 0
98	g_bExtendedSignature: ; 026h
99	db 0x29
100	g_dwSerialNumber: ; 027h
101	dd 0x0a458634
102	g_abLabel: ; 02bh
103	db 'VirtualBox', 0ah
104	g_abFSType: ; 036h
105	db 'RawCode', 0ah
106	g_BpbEnd: ; 03ch
107
108
109	;
110	; Where to real init code starts.
111	;
112	bs3InitCode:
113	cli
114
115	; save the registers.
116	mov [cs:BS3_ADDR_REG_SAVE + BS3REGCTX.rax], ax
117	mov [cs:BS3_ADDR_REG_SAVE + BS3REGCTX.ds], ds
118
119	; set up the DS segment reister so we can skip the CS prefix when saving more prefixes..
120	mov ax, 0
121	mov ds, ax
122
123	mov [BS3_ADDR_REG_SAVE + BS3REGCTX.rdi], di
124	mov di, BS3_ADDR_REG_SAVE
125	mov [di + BS3REGCTX.rsp], sp
126	mov [di + BS3REGCTX.ss], ss
127	mov [di + BS3REGCTX.rcx], cx
128	mov [di + BS3REGCTX.es], es
129	mov [di + BS3REGCTX.rbp], bp
130
131	; set up the stack.
132	mov ss, ax
133	mov sp, BS3_ADDR_STACK
134
135	; Load es and setup bp frame.
136	mov es, ax
137	mov bp, sp
138	%if 0
139	mov [bp], ax ; clear the first 8 bytes (terminates the ebp chain)
140	mov [bp + 02h], ax
141	mov [bp + 04h], ax
142	mov [bp + 06h], ax
143	%else
144	mov di, sp ; Combine clearing the rbp chain and register save area.
145	%endif
146
147	; Save flags now that we know that there's a valid stack.
148	pushf
149
150	;
151	; Clear the register area.
152	;
153	%if 0
154	mov di, BS3_ADDR_REG_SAVE
155	mov cx, BS3REGCTX_size/2
156	%else
157	mov cx, (BS3_ADDR_LOAD - BS3_ADDR_STACK) / 2
158	%endif
159	cld
160	rep stosw
161
162	;
163	; Do basic CPU detection.
164	;
165
166	; 0. Load the register save area address into DI to avoid absolute addressing
167	; when saving additional state. To avoid disp16, offset the address.
168	mov di, BS3_ADDR_REG_SAVE + 0x70
169
170	; 1. bit 15-bit was fixed to 1 in pre-286 CPUs, and fixed to 0 in 286+.
171	mov ax, [bp - 2]
172	test ah, 080h ; always set on pre 286, clear on 286 and later
173	jnz .pre_80286
174
175	; 2. On a 286 you cannot popf IOPL and NT from real mode.
176	.detect_286_or_386plus:
177	CPU 286
178	mov ah, (X86_EFL_IOPL \| X86_EFL_NT) >> 8
179	push ax
180	popf
181	pushf
182	cmp ah, [bp - 3]
183	pop ax
184	je .is_386plus
185	.is_80286:
186	CPU 286
187	smsw [di + BS3REGCTX.cr0 - 0x70]
188	.pre_80286:
189	CPU 8086
190	mov [di - 0x70 + BS3REGCTX.rbx], bx
191	mov [di - 0x70 + BS3REGCTX.rdx], dx
192	mov [di - 0x70 + BS3REGCTX.rsi], si
193	jmp .do_load
194
195	; Save 386 registers. We can now skip the CS prefix as DS is flat.
196	CPU 386
197	.is_386plus:
198	shr eax, 16
199	mov [di - 0x70 + BS3REGCTX.rax+2], ax
200	mov eax, esp
201	shr eax, 16
202	mov [di - 0x70 + BS3REGCTX.rsp+2], ax
203	mov eax, ebp
204	shr eax, 16
205	mov [di - 0x70 + BS3REGCTX.rbp+2], ax
206	mov eax, edi
207	shr eax, 16
208	mov [di - 0x70 + BS3REGCTX.rdi+2], ax
209	shr ecx, 16
210	mov [di - 0x70 + BS3REGCTX.rcx+2], cx
211	mov [di - 0x70 + BS3REGCTX.fs], fs
212	mov [di - 0x70 + BS3REGCTX.gs], gs
213	mov [di - 0x70 + BS3REGCTX.rbx], ebx
214	mov [di - 0x70 + BS3REGCTX.rdx], edx
215	mov [di - 0x70 + BS3REGCTX.rsi], esi
216	mov eax, cr2
217	mov [di - 0x70 + BS3REGCTX.cr2], eax
218	mov eax, cr3
219	mov [di - 0x70 + BS3REGCTX.cr3], eax
220	mov byte [di - 0x70 + BS3REGCTX.bMode], BS3_MODE_RM
221	mov [di - 0x70 + BS3REGCTX.cs], cs
222	xor eax, eax
223	mov ax, start
224	mov [di - 0x70 + BS3REGCTX.rip], eax
225
226	; Pentium/486+: CR4 requires VME/CPUID, so we need to detect that before accessing it.
227	mov [di - 0x70 + BS3REGCTX.cr4], eax
228	popf ; (restores IOPL+NT)
229	pushfd
230	pop eax
231	mov [di - 0x70 + BS3REGCTX.rflags], eax
232	xor eax, X86_EFL_ID
233	push eax
234	popfd
235	pushfd
236	pop ebx
237	cmp ebx, eax
238	jne .no_cr4
239	mov eax, cr4
240	mov [di - 0x70 + BS3REGCTX.cr4], eax
241	.no_cr4:
242	; Make sure caching is enabled and alignment is off.
243	mov eax, cr0
244	mov [di - 0x70 + BS3REGCTX.cr0], eax
245	and eax, ~(X86_CR0_NW \| X86_CR0_CD \| X86_CR0_AM)
246	mov cr0, eax
247
248	; Load all the code.
249	.do_load
250	mov [g_bBootDrv], dl
251	call NAME(bs3InitLoadImage)
252	%if 0
253	mov al, '='
254	call NAME(bs3PrintChrInAl)
255	%endif
256
257	;
258	; Call the user 'main' procedure (shouldn't return).
259	;
260	cld
261	call BS3_SEL_TEXT16:0000h
262
263	; Panic/hang.
264	Bs3Panic:
265	cli
266	jmp Bs3Panic
267
268
269	;; For debug and error handling.
270	; @uses ax
271	bs3PrintHexInAl:
272	CPU 286
273	push ax
274	shr al, 4
275	call bs3PrintHexDigitInAl
276	pop ax
277	bs3PrintHexDigitInAl:
278	and al, 0fh
279	cmp al, 10
280	jb .decimal
281	add al, 'a' - '0' - 10
282	.decimal:
283	add al, '0'
284	bs3PrintChrInAl:
285	push bx
286	mov ah, 0eh
287	mov bx, 0ff00h
288	int 10h
289	pop bx
290	ret
291
292
293	;;
294	; Loads the image off the floppy.
295	;
296	; This uses g_cLargeTotalSectors to figure out how much to load.
297	;
298	; Clobbers everything except ebp and esp. Panics on failure.
299	;
300	; @param dl The boot drive number (from BIOS).
301	; @uses ax, cx, bx, esi, di
302	;
303	BEGINPROC bs3InitLoadImage
304	push bp
305	mov bp, sp
306	push es
307	%define bSavedDiskNo byte [bp - 04h]
308	push dx
309	%define bMaxSector byte [bp - 06h]
310	%define wMaxSector word [bp - 06h]
311	xor ax, ax
312	push ax
313	%define bMaxHead byte [bp - 08h]
314	push ax
315
316	;
317	; Try figure the geometry.
318	;
319	mov ah, 08h
320	int 13h
321	jc .failure
322	and cl, 63 ; only the sector count.
323	mov bMaxSector, cl
324	mov bMaxHead, dh
325	mov dl, bSavedDiskNo
326
327	%if 0 ; bMaxSector=0x12 (18); bMaxHead=0x01; bMaxCylinder=0x4f (79)
328	mov al, 'S'
329	call bs3PrintChrInAl
330	mov al, bMaxSector
331	call bs3PrintHexInAl
332	mov al, 'H'
333	call bs3PrintChrInAl
334	mov al, bMaxHead
335	call bs3PrintHexInAl
336	mov al, 'C'
337	call bs3PrintChrInAl
338	mov al, ch ; first 8-bit of cylinder count.
339	call bs3PrintHexInAl
340	mov al, ';'
341	call bs3PrintChrInAl
342	%endif
343
344	%ifndef BS3KIT_BOOTSECTOR_FASTER_LOAD
345	;
346	; Load the sectors following the boot sector one at a time (avoids problems).
347	;
348	mov si, [g_cLargeTotalSectors] ; 16-bit sector count ==> max 512 * 65 535 = 33 553 920 bytes.
349	dec si ; Practically max: ca 575 KB, or 1150 sectors. Linker set BS3_MAX_SIZE to 480KB.
350
351	mov di, BS3_ADDR_LOAD / 16 ; The current load segment.
352	mov cx, 0002h ; ch/cylinder=0 (0-based); cl/sector=2 (1-based)
353	xor dh, dh ; dh/head=0
354	.the_load_loop:
355	%if 0
356	mov al, 'c'
357	call bs3PrintChrInAl
358	mov al, ch
359	call bs3PrintHexInAl
360	mov al, 's'
361	call bs3PrintChrInAl
362	mov al, cl
363	call bs3PrintHexInAl
364	mov al, 'h'
365	call bs3PrintChrInAl
366	mov al, dh
367	call bs3PrintHexInAl
368	mov al, ';'
369	call bs3PrintChrInAl
370	%elifdef BS3KIT_BOOTSECTOR_LOAD_DOTS
371	mov al, '.'
372	call bs3PrintChrInAl
373	%endif
374	xor bx, bx
375	mov es, di ; es:bx -> buffer
376	mov ax, 0201h ; al=1 sector; ah=read function
377	int 13h
378	jc .failure
379
380	; advance to the next sector/head/cylinder.
381	inc cl
382	cmp cl, bMaxSector
383	jbe .adv_addr
384
385	mov cl, 1
386	inc dh
387	cmp dh, bMaxHead
388	jbe .adv_addr
389
390	mov dh, 0
391	inc ch
392
393	.adv_addr:
394	add di, 512 / 16
395	dec si
396	jnz .the_load_loop
397
398	%else ; BS3KIT_BOOTSECTOR_FASTER_LOAD
399	;
400	; Load the sectors following the boot sector, trying to load a whole
401	; side in each bios call, falling back on single sector reads if we
402	; run into DMA 64KB boundrary issues (BIOS must tell us).
403	;
404	mov si, [g_cLargeTotalSectors] ; 16-bit sector count ==> max 512 * 65 535 = 33 553 920 bytes.
405	dec si ; Skip the boot sector, it's not part of the test image we execute.
406	mov di, BS3_ADDR_LOAD / 16 ; The current load segment.
407	mov cx, 0002h ; ch/cylinder=0 (0-based); cl/sector=0 (1-based)
408	xor dh, dh ; dh/head=0
409	.the_load_loop:
410	%if 0
411	mov al, 'c'
412	call bs3PrintChrInAl
413	mov al, ch
414	call bs3PrintHexInAl
415	mov al, 's'
416	call bs3PrintChrInAl
417	mov al, cl
418	call bs3PrintHexInAl
419	mov al, 'h'
420	call bs3PrintChrInAl
421	mov al, dh
422	call bs3PrintHexInAl
423	mov al, ';'
424	call bs3PrintChrInAl
425	%elifdef BS3KIT_BOOTSECTOR_LOAD_DOTS
426	mov al, '.'
427	call bs3PrintChrInAl
428	%endif
429	mov ax, wMaxSector ; read to the end of the side by default.
430	sub al, cl
431	inc al
432	.read_again:
433	cmp si, ax
434	jae .do_read
435	mov ax, si
436	.do_read:
437	mov ah, 02h ; ah=read function
438	xor bx, bx
439	mov es, di ; es:bx -> buffer
440	int 13h
441	jnc .advance_sector
442
443	cmp ah, 9 ; DMA 64KB crossing error
444	jne .failure
445	mov ax, 1 ; Retry reading a single sector.
446	jmp .read_again
447
448	; advance to the next sector/head/cylinder and address.
449	.advance_sector:
450	inc cl
451	cmp cl, bMaxSector
452	jbe .adv_addr
453
454	mov cl, 1
455	inc dh
456	cmp dh, bMaxHead
457	jbe .adv_addr
458
459	mov dh, 0
460	inc ch
461
462	.adv_addr:
463	dec si
464	jz .done_reading
465	add di, 512 / 16
466	dec al
467	jnz .advance_sector
468	jmp .the_load_loop
469
470	.done_reading:
471	%endif ; BS3KIT_BOOTSECTOR_FASTER_LOAD
472	%if 0
473	mov al, 'D'
474	call bs3PrintChrInAl
475	%elifdef BS3KIT_BOOTSECTOR_LOAD_DOTS
476	mov al, 13
477	call bs3PrintChrInAl
478	mov al, 10
479	call bs3PrintChrInAl
480	%endif
481
482	add sp, 2*2
483	pop dx
484	pop es
485	pop bp
486	ret
487
488	;
489	; Something went wrong, display a message.
490	;
491	.failure:
492	%if 1 ; Disable to save space for debugging.
493	push ax
494
495	; print message
496	mov si, .s_szErrMsg
497	.failure_next_char:
498	lodsb
499	call bs3PrintChrInAl
500	cmp si, .s_szErrMsgEnd
501	jb .failure_next_char
502
503	; panic
504	pop ax
505	%if 1
506	mov al, ah
507	push bs3PrintHexInAl
508	%endif
509	call Bs3Panic
510	.s_szErrMsg:
511	db 13, 10, 'rd err! '
512	%else
513	hlt
514	jmp .failure
515	%endif
516	.s_szErrMsgEnd:
517	;ENDPROC bs3InitLoadImage - don't want the padding.
518
519
520	;
521	; Pad the remainder of the sector with int3's and end it with the DOS signature.
522	;
523	bs3Padding:
524	times ( 510 - ( (bs3Padding - start) % 512 ) ) db 0cch
525	db 055h, 0aah
526

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/ValidationKit/bootsectors/bs3kit/bs3-bootsector.asm@ 86728

Download in other formats: