bs3-mode-TestDoModesHlp.asm@ 66446

Last change on this file since 66446 was 66179, checked in by vboxsync, 8 years ago
bs3kit: Added Bs3TestDoModesByMax.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 35.5 KB

Line
1	; $Id: bs3-mode-TestDoModesHlp.asm 66179 2017-03-21 14:51:51Z vboxsync $
2	;; @file
3	; BS3Kit - Bs3TestDoModes helpers
4	;
5
6	;
7	; Copyright (C) 2007-2016 Oracle Corporation
8	;
9	; This file is part of VirtualBox Open Source Edition (OSE), as
10	; available from http://www.virtualbox.org. This file is free software;
11	; you can redistribute it and/or modify it under the terms of the GNU
12	; General Public License (GPL) as published by the Free Software
13	; Foundation, in version 2 as it comes in the "COPYING" file of the
14	; VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	;
17	; The contents of this file may alternatively be used under the terms
18	; of the Common Development and Distribution License Version 1.0
19	; (CDDL) only, as it comes in the "COPYING.CDDL" file of the
20	; VirtualBox OSE distribution, in which case the provisions of the
21	; CDDL are applicable instead of those of the GPL.
22	;
23	; You may elect to license modified versions of this file under the
24	; terms and conditions of either the GPL or the CDDL or both.
25	;
26
27	;*********************************************************************************************************************************
28	;* Header Files *
29	;*********************************************************************************************************************************
30	%include "bs3kit-template-header.mac"
31
32
33	;*********************************************************************************************************************************
34	;* Defined Constants And Macros *
35	;*********************************************************************************************************************************
36	;
37	; We put most of this mess in the RMTEXT16 segment when in real mode.
38	;
39	%if TMPL_MODE == BS3_MODE_RM
40	%define MY_BEGIN_TEXT BS3_BEGIN_RMTEXT16
41	%define MY_BEGIN_TEXT16 BS3_BEGIN_RMTEXT16
42	%define MY_TEXT16_WRT(a_Label) a_Label wrt BS3GROUPRMTEXT16
43	%else
44	%define MY_BEGIN_TEXT TMPL_BEGIN_TEXT
45	%define MY_BEGIN_TEXT16 BS3_BEGIN_TEXT16
46	%define MY_TEXT16_WRT(a_Label) BS3_TEXT16_WRT(a_Label)
47	%endif
48
49
50	;*********************************************************************************************************************************
51	;* External Symbols *
52	;*********************************************************************************************************************************
53	%if TMPL_MODE == BS3_MODE_RM
54	BS3_BEGIN_TEXT16_FARSTUBS
55	extern TMPL_FAR_NM(Bs3SwitchToRM)
56	extern TMPL_FAR_NM(Bs3SwitchToPE16)
57	extern TMPL_FAR_NM(Bs3SwitchToPE16_32)
58	extern TMPL_FAR_NM(Bs3SwitchToPE16_V86)
59	extern TMPL_FAR_NM(Bs3SwitchToPE32)
60	extern TMPL_FAR_NM(Bs3SwitchToPE32_16)
61	extern TMPL_FAR_NM(Bs3SwitchToPEV86)
62	extern TMPL_FAR_NM(Bs3SwitchToPP16)
63	extern TMPL_FAR_NM(Bs3SwitchToPP16_32)
64	extern TMPL_FAR_NM(Bs3SwitchToPP16_V86)
65	extern TMPL_FAR_NM(Bs3SwitchToPP32)
66	extern TMPL_FAR_NM(Bs3SwitchToPP32_16)
67	extern TMPL_FAR_NM(Bs3SwitchToPPV86)
68	extern TMPL_FAR_NM(Bs3SwitchToPAE16)
69	extern TMPL_FAR_NM(Bs3SwitchToPAE16_32)
70	extern TMPL_FAR_NM(Bs3SwitchToPAE16_V86)
71	extern TMPL_FAR_NM(Bs3SwitchToPAE32)
72	extern TMPL_FAR_NM(Bs3SwitchToPAE32_16)
73	extern TMPL_FAR_NM(Bs3SwitchToPAEV86)
74	extern TMPL_FAR_NM(Bs3SwitchToLM16)
75	extern TMPL_FAR_NM(Bs3SwitchToLM32)
76	extern TMPL_FAR_NM(Bs3SwitchToLM64)
77	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_rm_far)
78	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pe16_far)
79	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pe16_v86_far)
80	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pe32_16_far)
81	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pev86_far)
82	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pp16_far)
83	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pp16_v86_far)
84	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pp32_16_far)
85	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_ppv86_far)
86	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pae16_far)
87	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pae16_v86_far)
88	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pae32_16_far)
89	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_paev86_far)
90	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_lm16_far)
91	%else
92	BS3_BEGIN_TEXT16
93	extern TMPL_NM(Bs3SwitchToRM)
94	extern TMPL_NM(Bs3SwitchToPE16)
95	extern TMPL_NM(Bs3SwitchToPE16_32)
96	extern TMPL_NM(Bs3SwitchToPE16_V86)
97	extern TMPL_NM(Bs3SwitchToPE32)
98	extern TMPL_NM(Bs3SwitchToPE32_16)
99	extern TMPL_NM(Bs3SwitchToPEV86)
100	extern TMPL_NM(Bs3SwitchToPP16)
101	extern TMPL_NM(Bs3SwitchToPP16_32)
102	extern TMPL_NM(Bs3SwitchToPP16_V86)
103	extern TMPL_NM(Bs3SwitchToPP32)
104	extern TMPL_NM(Bs3SwitchToPP32_16)
105	extern TMPL_NM(Bs3SwitchToPPV86)
106	extern TMPL_NM(Bs3SwitchToPAE16)
107	extern TMPL_NM(Bs3SwitchToPAE16_32)
108	extern TMPL_NM(Bs3SwitchToPAE16_V86)
109	extern TMPL_NM(Bs3SwitchToPAE32)
110	extern TMPL_NM(Bs3SwitchToPAE32_16)
111	extern TMPL_NM(Bs3SwitchToPAEV86)
112	extern TMPL_NM(Bs3SwitchToLM16)
113	extern TMPL_NM(Bs3SwitchToLM32)
114	extern TMPL_NM(Bs3SwitchToLM64)
115	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_rm)
116	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pe16)
117	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pe16_v86)
118	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pe32_16)
119	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pev86)
120	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pp16)
121	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pp16_v86)
122	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pp32_16)
123	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_ppv86)
124	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pae16)
125	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pae16_v86)
126	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pae32_16)
127	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_paev86)
128	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_lm16)
129	%endif
130	BS3_BEGIN_TEXT16
131	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pe16_32):wrt BS3FLAT
132	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pe32):wrt BS3FLAT
133	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pp16_32):wrt BS3FLAT
134	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pp32):wrt BS3FLAT
135	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pae16_32):wrt BS3FLAT
136	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pae32):wrt BS3FLAT
137	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_lm32):wrt BS3FLAT
138	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_lm64):wrt BS3FLAT
139
140
141	MY_BEGIN_TEXT16 ; need the group definition
142	MY_BEGIN_TEXT
143
144	;;
145	; Shared prologue code.
146	; @param xAX Where to jump to for the main event.
147	;
148	BS3_GLOBAL_NAME_EX TMPL_NM(bs3TestCallDoerPrologue), , 0
149	BS3_CALL_CONV_PROLOG 1
150	push xBP
151	mov xBP, xSP
152	xPUSHF
153
154	; Save non-volatile registers so the DO function doesn't have to.
155	push xBX
156	push xCX
157	push xDX
158	push xSI
159	push xDI
160	%if TMPL_BITS != 64
161	push ds
162	push es
163	push ss
164	%if TMPL_BITS != 16
165	push fs
166	push gs
167	%endif
168	%endif
169	%if TMPL_BITS == 64
170	push r8
171	push r9
172	push r10
173	push r11
174	push r12
175	push r13
176	push r14
177	push r15
178	%endif
179
180	; Jump to the main code.
181	jmp xAX
182
183	;;
184	; Shared epilogue code.
185	; @param xAX Return code.
186	;
187	BS3_GLOBAL_NAME_EX TMPL_NM(bs3TestCallDoerEpilogue), , 0
188	; Restore registers.
189	%if TMPL_BITS == 16
190	sub bp, (1+5+3)*2
191	mov sp, bp
192	%elif TMPL_BITS == 32
193	lea xSP, [xBP - (1+5+5)*4]
194	%else
195	lea xSP, [xBP - (1+5+8)*8]
196	pop r15
197	pop r14
198	pop r13
199	pop r12
200	pop r11
201	pop r10
202	pop r9
203	pop r8
204	%endif
205	%if TMPL_BITS != 64
206	%if TMPL_BITS != 16
207	pop gs
208	pop fs
209	%endif
210	pop ss
211	pop es
212	pop ds
213	%endif
214	pop xDI
215	pop xSI
216	pop xDX
217	pop xCX
218	pop xBX
219	xPOPF
220	pop xBP
221	ret
222
223	;
224	; For checking that the mode switching macros doesn't screw up GPRs.
225	; Note! Does not work on pre 286 hardware! So, for debugging only.
226	;
227	%if 0
228	%macro STRICT_SAVE_REGS 0
229	movzx esp, sp
230	sub esp, BS3REGCTX_size
231	mov [esp + BS3REGCTX.rax], eax
232	mov dword [esp + BS3REGCTX.rax+4], 0xdead0000
233	mov [esp + BS3REGCTX.rcx], ecx
234	mov dword [esp + BS3REGCTX.rcx+4], 0xdead0001
235	mov [esp + BS3REGCTX.rdx], edx
236	mov dword [esp + BS3REGCTX.rdx+4], 0xdead0002
237	mov [esp + BS3REGCTX.rbx], ebx
238	mov dword [esp + BS3REGCTX.rbx+4], 0xdead0003
239	mov [esp + BS3REGCTX.rbp], ebp
240	mov [esp + BS3REGCTX.rsp], esp
241	mov [esp + BS3REGCTX.rsi], esi
242	mov [esp + BS3REGCTX.rdi], edi
243	%endmacro
244
245	%macro STRICT_CHECK_REGS 0
246	%%_esp: cmp [esp + BS3REGCTX.rsp], esp
247	jne %%_esp
248	%%_eax: cmp [esp + BS3REGCTX.rax], eax
249	jne %%_eax
250	%%_ecx: mov [esp + BS3REGCTX.rcx], ecx
251	jne %%_ecx
252	%%_edx: cmp [esp + BS3REGCTX.rdx], edx
253	jne %%_edx
254	%%_ebx: cmp [esp + BS3REGCTX.rbx], ebx
255	jne %%_ebx
256	%%_ebp: cmp [esp + BS3REGCTX.rbp], ebp
257	jne %%_ebp
258	%%_esi: cmp [esp + BS3REGCTX.rsi], esi
259	jne %%_esi
260	%%_edi: cmp [esp + BS3REGCTX.rdi], edi
261	jne %%_edi
262	add esp, BS3REGCTX_size
263	%endmacro
264	%else
265
266	%macro STRICT_SAVE_REGS 0
267	%endmacro
268	%macro STRICT_CHECK_REGS 0
269	%endmacro
270	%endif
271
272
273	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
274	;; Real mode
275	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
276
277	;;
278	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInRM(uint16_t offBs3Text16);
279	; @uses rax
280	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInRM, BS3_PBC_NEAR
281	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
282	jmp TMPL_NM(bs3TestCallDoerPrologue)
283	MY_BEGIN_TEXT16
284	BS3_SET_BITS TMPL_BITS
285	BS3_GLOBAL_LOCAL_LABEL .doit
286	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
287	mov dx, [xBP + xCB + cbCurRetAddr + 2]
288
289	; Mode switch, make the call, switch back.
290	STRICT_SAVE_REGS
291	%if TMPL_MODE == BS3_MODE_RM
292	call far TMPL_FAR_NM(Bs3SwitchToRM)
293	%else
294	call TMPL_NM(Bs3SwitchToRM)
295	%endif
296	BS3_SET_BITS 16
297	STRICT_CHECK_REGS
298
299	mov cx, BS3_MODE_RM
300	push cx
301	push cs
302	mov cx, .return
303	push cx
304	push dx
305	push ax
306	retf
307	.return:
308
309	STRICT_SAVE_REGS
310	%if TMPL_MODE == BS3_MODE_RM
311	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_rm_far)
312	%else
313	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_rm)
314	%endif
315	BS3_SET_BITS TMPL_BITS
316	STRICT_CHECK_REGS
317	jmp TMPL_NM(bs3TestCallDoerEpilogue)
318	MY_BEGIN_TEXT
319	BS3_PROC_END_MODE Bs3TestCallDoerInRM
320
321
322	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
323	;; Unpage protection mode.
324	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
325
326	;;
327	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPE16(uint16_t offBs3Text16);
328	; @uses rax
329	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPE16, BS3_PBC_NEAR
330	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
331	jmp TMPL_NM(bs3TestCallDoerPrologue)
332	MY_BEGIN_TEXT16
333	BS3_SET_BITS TMPL_BITS
334	BS3_GLOBAL_LOCAL_LABEL .doit
335	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
336	mov dx, [xBP + xCB + cbCurRetAddr + 2]
337
338	; Mode switch, make the call, switch back.
339	STRICT_SAVE_REGS
340	%if TMPL_MODE == BS3_MODE_RM
341	call far TMPL_FAR_NM(Bs3SwitchToPE16)
342	%else
343	call TMPL_NM(Bs3SwitchToPE16)
344	%endif
345	BS3_SET_BITS 16
346	STRICT_CHECK_REGS
347
348	push BS3_MODE_PE16
349	push cs
350	push .return
351	push dx
352	push ax
353	retf
354	.return:
355
356	STRICT_SAVE_REGS
357	%if TMPL_MODE == BS3_MODE_RM
358	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pe16_far)
359	%else
360	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pe16)
361	%endif
362	BS3_SET_BITS TMPL_BITS
363	jmp TMPL_NM(bs3TestCallDoerEpilogue)
364	MY_BEGIN_TEXT
365	BS3_PROC_END_MODE Bs3TestCallDoerInPE16
366
367	;;
368	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPE16_32(uint32_t FlatWorkerAddr, uint8_t bMode);
369	; @uses rax
370	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPE16_32, BS3_PBC_NEAR
371	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
372	jmp TMPL_NM(bs3TestCallDoerPrologue)
373	.doit:
374	mov eax, [xBP + xCB + cbCurRetAddr] ; Load function pointer.
375	movzx edx, byte [xBP + xCB + cbCurRetAddr + sCB] ; bMode
376
377	; Mode switch, make the call, switch back.
378	STRICT_SAVE_REGS
379	%if TMPL_MODE == BS3_MODE_RM
380	call far TMPL_FAR_NM(Bs3SwitchToPE16_32)
381	%else
382	call TMPL_NM(Bs3SwitchToPE16_32)
383	%endif
384	BS3_SET_BITS 32
385	STRICT_CHECK_REGS
386
387	push edx ; bMode
388	call eax
389
390	STRICT_SAVE_REGS
391	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pe16_32)
392	BS3_SET_BITS TMPL_BITS
393	STRICT_CHECK_REGS
394	jmp TMPL_NM(bs3TestCallDoerEpilogue)
395	BS3_PROC_END_MODE Bs3TestCallDoerInPE16_32
396
397	;;
398	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPE16_V86(uint16_t offBs3Text16);
399	; @uses rax
400	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPE16_V86, BS3_PBC_NEAR
401	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
402	jmp TMPL_NM(bs3TestCallDoerPrologue)
403	MY_BEGIN_TEXT16
404	BS3_SET_BITS TMPL_BITS
405	BS3_GLOBAL_LOCAL_LABEL .doit
406	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
407	mov dx, [xBP + xCB + cbCurRetAddr + 2]
408
409	; Mode switch, make the call, switch back.
410	STRICT_SAVE_REGS
411	%if TMPL_MODE == BS3_MODE_RM
412	call far TMPL_FAR_NM(Bs3SwitchToPE16_V86)
413	%else
414	call TMPL_NM(Bs3SwitchToPE16_V86)
415	%endif
416	BS3_SET_BITS 16
417	STRICT_CHECK_REGS
418
419	push BS3_MODE_PE16_V86
420	push cs
421	push .return
422	push dx
423	push ax
424	retf
425	.return:
426
427	STRICT_SAVE_REGS
428	%if TMPL_MODE == BS3_MODE_RM
429	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pe16_v86_far)
430	%else
431	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pe16_v86)
432	%endif
433	BS3_SET_BITS TMPL_BITS
434	STRICT_CHECK_REGS
435	jmp TMPL_NM(bs3TestCallDoerEpilogue)
436	MY_BEGIN_TEXT
437	BS3_PROC_END_MODE Bs3TestCallDoerInPE16_V86
438
439	;;
440	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPE32(uint32_t FlatWorkerAddr, uint8_t bMode);
441	; @uses rax
442	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPE32, BS3_PBC_NEAR
443	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
444	jmp TMPL_NM(bs3TestCallDoerPrologue)
445	.doit:
446	mov eax, [xBP + xCB + cbCurRetAddr] ; Load function pointer.
447	movzx edx, byte [xBP + xCB + cbCurRetAddr + sCB] ; bMode
448
449	; Mode switch, make the call, switch back.
450	STRICT_SAVE_REGS
451	%if TMPL_MODE == BS3_MODE_RM
452	call far TMPL_FAR_NM(Bs3SwitchToPE32)
453	%else
454	call TMPL_NM(Bs3SwitchToPE32)
455	%endif
456	BS3_SET_BITS 32
457	STRICT_CHECK_REGS
458
459	push edx ; bMode
460	call eax
461
462	STRICT_SAVE_REGS
463	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pe32)
464	BS3_SET_BITS TMPL_BITS
465	STRICT_CHECK_REGS
466	jmp TMPL_NM(bs3TestCallDoerEpilogue)
467	BS3_PROC_END_MODE Bs3TestCallDoerInPE32
468
469	;;
470	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPE32_16(uint16_t offBs3Text16);
471	; @uses rax
472	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPE32_16, BS3_PBC_NEAR
473	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
474	jmp TMPL_NM(bs3TestCallDoerPrologue)
475	MY_BEGIN_TEXT16
476	BS3_SET_BITS TMPL_BITS
477	BS3_GLOBAL_LOCAL_LABEL .doit
478	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
479	mov dx, [xBP + xCB + cbCurRetAddr + 2]
480
481	; Mode switch, make the call, switch back.
482	STRICT_SAVE_REGS
483	%if TMPL_MODE == BS3_MODE_RM
484	call far TMPL_FAR_NM(Bs3SwitchToPE32_16)
485	%else
486	call TMPL_NM(Bs3SwitchToPE32_16)
487	%endif
488	BS3_SET_BITS 16
489	STRICT_CHECK_REGS
490
491	push BS3_MODE_PE32_16
492	push cs
493	push .return
494	push dx
495	push ax
496	retf
497	.return:
498
499	STRICT_SAVE_REGS
500	%if TMPL_MODE == BS3_MODE_RM
501	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pe32_16_far)
502	%else
503	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pe32_16)
504	%endif
505	BS3_SET_BITS TMPL_BITS
506	STRICT_CHECK_REGS
507	jmp TMPL_NM(bs3TestCallDoerEpilogue)
508	MY_BEGIN_TEXT
509	BS3_PROC_END_MODE Bs3TestCallDoerInPE32_16
510
511	;;
512	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPEV86(uint16_t offBs3Text16);
513	; @uses rax
514	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPEV86, BS3_PBC_NEAR
515	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
516	jmp TMPL_NM(bs3TestCallDoerPrologue)
517	MY_BEGIN_TEXT16
518	BS3_SET_BITS TMPL_BITS
519	BS3_GLOBAL_LOCAL_LABEL .doit
520	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
521	mov dx, [xBP + xCB + cbCurRetAddr + 2]
522
523	; Mode switch, make the call, switch back.
524	STRICT_SAVE_REGS
525	%if TMPL_MODE == BS3_MODE_RM
526	call far TMPL_FAR_NM(Bs3SwitchToPEV86)
527	%else
528	call TMPL_NM(Bs3SwitchToPEV86)
529	%endif
530	BS3_SET_BITS 16
531	STRICT_CHECK_REGS
532
533	push BS3_MODE_PEV86
534	push cs
535	push .return
536	push dx
537	push ax
538	retf
539	.return:
540
541	STRICT_SAVE_REGS
542	%if TMPL_MODE == BS3_MODE_RM
543	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pev86_far)
544	%else
545	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pev86)
546	%endif
547	BS3_SET_BITS TMPL_BITS
548	STRICT_CHECK_REGS
549	jmp TMPL_NM(bs3TestCallDoerEpilogue)
550	MY_BEGIN_TEXT
551	BS3_PROC_END_MODE Bs3TestCallDoerInPEV86
552
553
554
555	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
556	;; Page protection mode.
557	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
558
559	;;
560	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPP16(uint16_t offBs3Text16);
561	; @uses rax
562	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPP16, BS3_PBC_NEAR
563	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
564	jmp TMPL_NM(bs3TestCallDoerPrologue)
565	MY_BEGIN_TEXT16
566	BS3_SET_BITS TMPL_BITS
567	BS3_GLOBAL_LOCAL_LABEL .doit
568	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
569	mov dx, [xBP + xCB + cbCurRetAddr + 2]
570
571	; Mode switch, make the call, switch back.
572	STRICT_SAVE_REGS
573	%if TMPL_MODE == BS3_MODE_RM
574	call far TMPL_FAR_NM(Bs3SwitchToPP16)
575	%else
576	call TMPL_NM(Bs3SwitchToPP16)
577	%endif
578	BS3_SET_BITS 16
579	STRICT_CHECK_REGS
580
581	push BS3_MODE_PP16
582	push cs
583	push .return
584	push dx
585	push ax
586	retf
587	.return:
588
589	STRICT_SAVE_REGS
590	%if TMPL_MODE == BS3_MODE_RM
591	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pp16_far)
592	%else
593	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pp16)
594	%endif
595	BS3_SET_BITS TMPL_BITS
596	STRICT_CHECK_REGS
597	jmp TMPL_NM(bs3TestCallDoerEpilogue)
598	MY_BEGIN_TEXT
599	BS3_PROC_END_MODE Bs3TestCallDoerInPP16
600
601	;;
602	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPP16_32(uint32_t uFlatWorkerAddr, uint8_t bMode);
603	; @uses rax
604	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPP16_32, BS3_PBC_NEAR
605	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
606	jmp TMPL_NM(bs3TestCallDoerPrologue)
607	.doit:
608	mov eax, [xBP + xCB + cbCurRetAddr] ; Load function pointer.
609	movzx edx, byte [xBP + xCB + cbCurRetAddr + sCB] ; bMode
610
611	; Mode switch, make the call, switch back.
612	STRICT_SAVE_REGS
613	%if TMPL_MODE == BS3_MODE_RM
614	call far TMPL_FAR_NM(Bs3SwitchToPP16_32)
615	%else
616	call TMPL_NM(Bs3SwitchToPP16_32)
617	%endif
618	BS3_SET_BITS 32
619	STRICT_CHECK_REGS
620
621	push edx
622	call eax
623
624	STRICT_SAVE_REGS
625	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pp16_32)
626	BS3_SET_BITS TMPL_BITS
627	STRICT_CHECK_REGS
628	jmp TMPL_NM(bs3TestCallDoerEpilogue)
629	BS3_PROC_END_MODE Bs3TestCallDoerInPP16_32
630
631	;;
632	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPP16_V86(uint16_t offBs3Text16);
633	; @uses rax
634	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPP16_V86, BS3_PBC_NEAR
635	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
636	jmp TMPL_NM(bs3TestCallDoerPrologue)
637	MY_BEGIN_TEXT16
638	BS3_SET_BITS TMPL_BITS
639	BS3_GLOBAL_LOCAL_LABEL .doit
640	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
641	mov dx, [xBP + xCB + cbCurRetAddr + 2]
642
643	; Mode switch, make the call, switch back.
644	STRICT_SAVE_REGS
645	%if TMPL_MODE == BS3_MODE_RM
646	call far TMPL_FAR_NM(Bs3SwitchToPP16_V86)
647	%else
648	call TMPL_NM(Bs3SwitchToPP16_V86)
649	%endif
650	BS3_SET_BITS 16
651	STRICT_CHECK_REGS
652
653	push BS3_MODE_PP16_V86
654	push cs
655	push .return
656	push dx
657	push ax
658	retf
659	.return:
660
661	STRICT_SAVE_REGS
662	%if TMPL_MODE == BS3_MODE_RM
663	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pp16_v86_far)
664	%else
665	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pp16_v86)
666	%endif
667	BS3_SET_BITS TMPL_BITS
668	STRICT_CHECK_REGS
669	jmp TMPL_NM(bs3TestCallDoerEpilogue)
670	MY_BEGIN_TEXT
671	BS3_PROC_END_MODE Bs3TestCallDoerInPP16_V86
672
673	;;
674	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPP32(uint32_t uFlatWorkerAddr, uint8_t bMode);
675	; @uses rax
676	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPP32, BS3_PBC_NEAR
677	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
678	jmp TMPL_NM(bs3TestCallDoerPrologue)
679	.doit:
680	mov eax, [xBP + xCB + cbCurRetAddr] ; Load function pointer.
681	movzx edx, byte [xBP + xCB + cbCurRetAddr + sCB] ; bMode
682
683	; Mode switch, make the call, switch back.
684	STRICT_SAVE_REGS
685	%if TMPL_MODE == BS3_MODE_RM
686	call far TMPL_FAR_NM(Bs3SwitchToPP32)
687	%else
688	call TMPL_NM(Bs3SwitchToPP32)
689	%endif
690	BS3_SET_BITS 32
691	STRICT_CHECK_REGS
692
693	push edx ; bMode
694	call eax
695
696	STRICT_SAVE_REGS
697	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pp32)
698	BS3_SET_BITS TMPL_BITS
699	STRICT_CHECK_REGS
700	jmp TMPL_NM(bs3TestCallDoerEpilogue)
701	BS3_PROC_END_MODE Bs3TestCallDoerInPP32
702
703	;;
704	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPP32_16(uint16_t offBs3Text16);
705	; @uses rax
706	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPP32_16, BS3_PBC_NEAR
707	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
708	jmp TMPL_NM(bs3TestCallDoerPrologue)
709	MY_BEGIN_TEXT16
710	BS3_SET_BITS TMPL_BITS
711	BS3_GLOBAL_LOCAL_LABEL .doit
712	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
713	mov dx, [xBP + xCB + cbCurRetAddr + 2]
714
715	; Mode switch, make the call, switch back.
716	STRICT_SAVE_REGS
717	%if TMPL_MODE == BS3_MODE_RM
718	call far TMPL_FAR_NM(Bs3SwitchToPP32_16)
719	%else
720	call TMPL_NM(Bs3SwitchToPP32_16)
721	%endif
722	BS3_SET_BITS 16
723	STRICT_CHECK_REGS
724
725	push BS3_MODE_PP32_16
726	push cs
727	push .return
728	push dx
729	push ax
730	retf
731	.return:
732
733	STRICT_SAVE_REGS
734	%if TMPL_MODE == BS3_MODE_RM
735	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pp32_16_far)
736	%else
737	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pp32_16)
738	%endif
739	BS3_SET_BITS TMPL_BITS
740	STRICT_CHECK_REGS
741	jmp TMPL_NM(bs3TestCallDoerEpilogue)
742	MY_BEGIN_TEXT
743	BS3_PROC_END_MODE Bs3TestCallDoerInPP32_16
744
745	;;
746	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPPV86(uint16_t offBs3Text16);
747	; @uses rax
748	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPPV86, BS3_PBC_NEAR
749	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
750	jmp TMPL_NM(bs3TestCallDoerPrologue)
751	MY_BEGIN_TEXT16
752	BS3_SET_BITS TMPL_BITS
753	BS3_GLOBAL_LOCAL_LABEL .doit
754	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
755	mov dx, [xBP + xCB + cbCurRetAddr + 2]
756
757	; Mode switch, make the call, switch back.
758	STRICT_SAVE_REGS
759	%if TMPL_MODE == BS3_MODE_RM
760	call far TMPL_FAR_NM(Bs3SwitchToPPV86)
761	%else
762	call TMPL_NM(Bs3SwitchToPPV86)
763	%endif
764	BS3_SET_BITS 16
765	STRICT_CHECK_REGS
766
767	push BS3_MODE_PPV86
768	push cs
769	push .return
770	push dx
771	push ax
772	retf
773	.return:
774
775	STRICT_SAVE_REGS
776	%if TMPL_MODE == BS3_MODE_RM
777	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_ppv86_far)
778	%else
779	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_ppv86)
780	%endif
781	BS3_SET_BITS TMPL_BITS
782	STRICT_CHECK_REGS
783	jmp TMPL_NM(bs3TestCallDoerEpilogue)
784	MY_BEGIN_TEXT
785	BS3_PROC_END_MODE Bs3TestCallDoerInPPV86
786
787
788	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
789	;; PAE paged protection mode.
790	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
791
792	;;
793	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPAE16(uint16_t offBs3Text16);
794	; @uses rax
795	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPAE16, BS3_PBC_NEAR
796	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
797	jmp TMPL_NM(bs3TestCallDoerPrologue)
798	MY_BEGIN_TEXT16
799	BS3_SET_BITS TMPL_BITS
800	BS3_GLOBAL_LOCAL_LABEL .doit
801	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
802	mov dx, [xBP + xCB + cbCurRetAddr + 2]
803
804	; Mode switch, make the call, switch back.
805	STRICT_SAVE_REGS
806	%if TMPL_MODE == BS3_MODE_RM
807	call far TMPL_FAR_NM(Bs3SwitchToPAE16)
808	%else
809	call TMPL_NM(Bs3SwitchToPAE16)
810	%endif
811	BS3_SET_BITS 16
812	STRICT_CHECK_REGS
813
814	push BS3_MODE_PAE16
815	push cs
816	push .return
817	push dx
818	push ax
819	retf
820	.return:
821
822	STRICT_SAVE_REGS
823	%if TMPL_MODE == BS3_MODE_RM
824	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pae16_far)
825	%else
826	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pae16)
827	%endif
828	BS3_SET_BITS TMPL_BITS
829	STRICT_CHECK_REGS
830	jmp TMPL_NM(bs3TestCallDoerEpilogue)
831	MY_BEGIN_TEXT
832	BS3_PROC_END_MODE Bs3TestCallDoerInPAE16
833
834	;;
835	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPAE16_32(uint32_t uFlatWorkerAddr, uint8_t bMode);
836	; @uses rax
837	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPAE16_32, BS3_PBC_NEAR
838	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
839	jmp TMPL_NM(bs3TestCallDoerPrologue)
840	.doit:
841	mov eax, [xBP + xCB + cbCurRetAddr] ; Load function pointer.
842	movzx edx, byte [xBP + xCB + cbCurRetAddr + sCB] ; bMode
843
844	; Mode switch, make the call, switch back.
845	STRICT_SAVE_REGS
846	%if TMPL_MODE == BS3_MODE_RM
847	call far TMPL_FAR_NM(Bs3SwitchToPAE16_32)
848	%else
849	call TMPL_NM(Bs3SwitchToPAE16_32)
850	%endif
851	BS3_SET_BITS 32
852	STRICT_CHECK_REGS
853
854	push edx ; bMode
855	call eax
856
857	STRICT_SAVE_REGS
858	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pae16_32)
859	BS3_SET_BITS TMPL_BITS
860	STRICT_CHECK_REGS
861	jmp TMPL_NM(bs3TestCallDoerEpilogue)
862	BS3_PROC_END_MODE Bs3TestCallDoerInPAE16_32
863
864	;;
865	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPAE16_V86(uint16_t offBs3Text16);
866	; @uses rax
867	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPAE16_V86, BS3_PBC_NEAR
868	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
869	jmp TMPL_NM(bs3TestCallDoerPrologue)
870	MY_BEGIN_TEXT16
871	BS3_SET_BITS TMPL_BITS
872	BS3_GLOBAL_LOCAL_LABEL .doit
873	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
874	mov dx, [xBP + xCB + cbCurRetAddr + 2]
875
876	; Mode switch, make the call, switch back.
877	STRICT_SAVE_REGS
878	%if TMPL_MODE == BS3_MODE_RM
879	call far TMPL_FAR_NM(Bs3SwitchToPAE16_V86)
880	%else
881	call TMPL_NM(Bs3SwitchToPAE16_V86)
882	%endif
883	BS3_SET_BITS 16
884	STRICT_CHECK_REGS
885
886	push BS3_MODE_PAE16_V86
887	push cs
888	push .return
889	push dx
890	push ax
891	retf
892	.return:
893
894	STRICT_SAVE_REGS
895	%if TMPL_MODE == BS3_MODE_RM
896	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pae16_v86_far)
897	%else
898	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pae16_v86)
899	%endif
900	BS3_SET_BITS TMPL_BITS
901	STRICT_CHECK_REGS
902	jmp TMPL_NM(bs3TestCallDoerEpilogue)
903	MY_BEGIN_TEXT
904	BS3_PROC_END_MODE Bs3TestCallDoerInPAE16_V86
905
906	;;
907	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPAE32(uint32_t uFlatWorkerAddr, uint8_t bMode);
908	; @uses rax
909	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPAE32, BS3_PBC_NEAR
910	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
911	jmp TMPL_NM(bs3TestCallDoerPrologue)
912	.doit:
913	mov eax, [xBP + xCB + cbCurRetAddr] ; Load function pointer.
914	movzx edx, byte [xBP + xCB + cbCurRetAddr + sCB] ; bMode
915
916	; Mode switch, make the call, switch back.
917	STRICT_SAVE_REGS
918	%if TMPL_MODE == BS3_MODE_RM
919	call far TMPL_FAR_NM(Bs3SwitchToPAE32)
920	%else
921	call TMPL_NM(Bs3SwitchToPAE32)
922	%endif
923	BS3_SET_BITS 32
924	STRICT_CHECK_REGS
925
926	push edx ; bMode
927	call eax
928
929	STRICT_SAVE_REGS
930	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pae32)
931	BS3_SET_BITS TMPL_BITS
932	STRICT_CHECK_REGS
933	jmp TMPL_NM(bs3TestCallDoerEpilogue)
934	BS3_PROC_END_MODE Bs3TestCallDoerInPAE32
935
936	;;
937	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPAE32_16(uint16_t offBs3Text16);
938	; @uses rax
939	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPAE32_16, BS3_PBC_NEAR
940	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
941	jmp TMPL_NM(bs3TestCallDoerPrologue)
942	MY_BEGIN_TEXT16
943	BS3_SET_BITS TMPL_BITS
944	BS3_GLOBAL_LOCAL_LABEL .doit
945	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
946	mov dx, [xBP + xCB + cbCurRetAddr + 2]
947
948	; Mode switch, make the call, switch back.
949	STRICT_SAVE_REGS
950	%if TMPL_MODE == BS3_MODE_RM
951	call far TMPL_FAR_NM(Bs3SwitchToPAE32_16)
952	%else
953	call TMPL_NM(Bs3SwitchToPAE32_16)
954	%endif
955	BS3_SET_BITS 16
956	STRICT_CHECK_REGS
957
958	push BS3_MODE_PAE32_16
959	push cs
960	push .return
961	push dx
962	push ax
963	retf
964	.return:
965
966	STRICT_SAVE_REGS
967	%if TMPL_MODE == BS3_MODE_RM
968	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_pae32_16_far)
969	%else
970	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_pae32_16)
971	%endif
972	BS3_SET_BITS TMPL_BITS
973	STRICT_CHECK_REGS
974	jmp TMPL_NM(bs3TestCallDoerEpilogue)
975	MY_BEGIN_TEXT
976	BS3_PROC_END_MODE Bs3TestCallDoerInPAE32_16
977
978	;;
979	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInPAEV86(uint16_t offBs3Text16);
980	; @uses rax
981	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInPAEV86, BS3_PBC_NEAR
982	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
983	jmp TMPL_NM(bs3TestCallDoerPrologue)
984	MY_BEGIN_TEXT16
985	BS3_SET_BITS TMPL_BITS
986	BS3_GLOBAL_LOCAL_LABEL .doit
987	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
988	mov dx, [xBP + xCB + cbCurRetAddr + 2]
989
990	; Mode switch, make the call, switch back.
991	STRICT_SAVE_REGS
992	%if TMPL_MODE == BS3_MODE_RM
993	call far TMPL_FAR_NM(Bs3SwitchToPAEV86)
994	%else
995	call TMPL_NM(Bs3SwitchToPAEV86)
996	%endif
997	BS3_SET_BITS 16
998	STRICT_CHECK_REGS
999
1000	push BS3_MODE_PAEV86
1001	push cs
1002	push .return
1003	push dx
1004	push ax
1005	retf
1006	.return:
1007
1008	STRICT_SAVE_REGS
1009	%if TMPL_MODE == BS3_MODE_RM
1010	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_paev86_far)
1011	%else
1012	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_paev86)
1013	%endif
1014	BS3_SET_BITS TMPL_BITS
1015	STRICT_CHECK_REGS
1016	jmp TMPL_NM(bs3TestCallDoerEpilogue)
1017	MY_BEGIN_TEXT
1018	BS3_PROC_END_MODE Bs3TestCallDoerInPAEV86
1019
1020
1021
1022	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
1023	;; Long mode
1024	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
1025
1026	;;
1027	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInLM16(uint16_t offBs3Text16);
1028	; @uses rax
1029	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInLM16, BS3_PBC_NEAR
1030	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
1031	jmp TMPL_NM(bs3TestCallDoerPrologue)
1032	MY_BEGIN_TEXT16
1033	BS3_SET_BITS TMPL_BITS
1034	BS3_GLOBAL_LOCAL_LABEL .doit
1035	mov ax, [xBP + xCB + cbCurRetAddr] ; Load far function pointer.
1036	mov dx, [xBP + xCB + cbCurRetAddr + 2]
1037
1038	; Mode switch, make the call, switch back.
1039	STRICT_SAVE_REGS
1040	%if TMPL_MODE == BS3_MODE_RM
1041	call far TMPL_FAR_NM(Bs3SwitchToLM16)
1042	%else
1043	call TMPL_NM(Bs3SwitchToLM16)
1044	%endif
1045	BS3_SET_BITS 16
1046	STRICT_CHECK_REGS
1047
1048	push BS3_MODE_LM16
1049	push cs
1050	push .return
1051	push dx
1052	push ax
1053	retf
1054	.return:
1055
1056	STRICT_SAVE_REGS
1057	%if TMPL_MODE == BS3_MODE_RM
1058	call far RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_lm16_far)
1059	%else
1060	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_lm16)
1061	%endif
1062	BS3_SET_BITS TMPL_BITS
1063	STRICT_CHECK_REGS
1064	jmp TMPL_NM(bs3TestCallDoerEpilogue)
1065	MY_BEGIN_TEXT
1066	BS3_PROC_END_MODE Bs3TestCallDoerInLM16
1067
1068	;;
1069	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInLM32(uint16_t offBs3Text16);
1070	; @uses rax
1071	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInLM32, BS3_PBC_NEAR
1072	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
1073	jmp TMPL_NM(bs3TestCallDoerPrologue)
1074	.doit:
1075	mov eax, [xBP + xCB + cbCurRetAddr] ; Load function pointer.
1076
1077	; Mode switch, make the call, switch back.
1078	STRICT_SAVE_REGS
1079	%if TMPL_MODE == BS3_MODE_RM
1080	call far TMPL_FAR_NM(Bs3SwitchToLM32)
1081	%else
1082	call TMPL_NM(Bs3SwitchToLM32)
1083	%endif
1084	BS3_SET_BITS 32
1085	STRICT_CHECK_REGS
1086
1087	and esp, ~03h
1088	push BS3_MODE_LM32
1089	call eax
1090
1091	STRICT_SAVE_REGS
1092	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_lm32)
1093	BS3_SET_BITS TMPL_BITS
1094	STRICT_CHECK_REGS
1095	jmp TMPL_NM(bs3TestCallDoerEpilogue)
1096	BS3_PROC_END_MODE Bs3TestCallDoerInLM32
1097
1098	;;
1099	; @cproto BS3_DECL(uint8_t) Bs3TestCallDoerInLM64(uint32_t uFlatWorkerAddr, uint8_t bMode);
1100	; @uses rax
1101	BS3_PROC_BEGIN_MODE Bs3TestCallDoerInLM64, BS3_PBC_NEAR
1102	BS3_LEA_MOV_WRT_RIP(xAX, MY_TEXT16_WRT(.doit))
1103	jmp TMPL_NM(bs3TestCallDoerPrologue)
1104	.doit:
1105	mov eax, [xBP + xCB + cbCurRetAddr] ; Load function pointer.
1106	movzx edx, byte [xBP + xCB + cbCurRetAddr + sCB] ; bMode
1107
1108	; Mode switch, make the call, switch back.
1109	STRICT_SAVE_REGS
1110	%if TMPL_MODE == BS3_MODE_RM
1111	call far TMPL_FAR_NM(Bs3SwitchToLM64)
1112	%else
1113	call TMPL_NM(Bs3SwitchToLM64)
1114	%endif
1115	BS3_SET_BITS 64
1116	STRICT_CHECK_REGS
1117
1118	and rsp, ~0fh
1119	sub rsp, 18h
1120	push rdx ; bMode
1121	BS3_CALL rax, 1
1122
1123	STRICT_SAVE_REGS
1124	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_Safe_lm64)
1125	BS3_SET_BITS TMPL_BITS
1126	STRICT_CHECK_REGS
1127	jmp TMPL_NM(bs3TestCallDoerEpilogue)
1128	BS3_PROC_END_MODE Bs3TestCallDoerInLM64
1129

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/ValidationKit/bootsectors/bs3kit/bs3-mode-TestDoModesHlp.asm@ 66446

Download in other formats: