bs3-mode-TrapSystemCallHandler.asm@ 66112

Last change on this file since 66112 was 60657, checked in by vboxsync, 9 years ago
bs3kit: updates
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 28.8 KB

Line
1	; $Id: bs3-mode-TrapSystemCallHandler.asm 60657 2016-04-22 15:57:22Z vboxsync $
2	;; @file
3	; BS3Kit - System call trap handler.
4	;
5
6	;
7	; Copyright (C) 2007-2016 Oracle Corporation
8	;
9	; This file is part of VirtualBox Open Source Edition (OSE), as
10	; available from http://www.virtualbox.org. This file is free software;
11	; you can redistribute it and/or modify it under the terms of the GNU
12	; General Public License (GPL) as published by the Free Software
13	; Foundation, in version 2 as it comes in the "COPYING" file of the
14	; VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	;
17	; The contents of this file may alternatively be used under the terms
18	; of the Common Development and Distribution License Version 1.0
19	; (CDDL) only, as it comes in the "COPYING.CDDL" file of the
20	; VirtualBox OSE distribution, in which case the provisions of the
21	; CDDL are applicable instead of those of the GPL.
22	;
23	; You may elect to license modified versions of this file under the
24	; terms and conditions of either the GPL or the CDDL or both.
25	;
26
27	;*********************************************************************************************************************************
28	;* Header Files *
29	;*********************************************************************************************************************************
30	%include "bs3kit-template-header.mac"
31
32
33	;*********************************************************************************************************************************
34	;* External Symbols *
35	;*********************************************************************************************************************************
36	BS3_EXTERN_DATA16 g_bBs3CurrentMode
37	%if TMPL_BITS != 64
38	BS3_EXTERN_DATA16 g_uBs3CpuDetected
39	%endif
40	%if TMPL_BITS == 16
41	BS3_EXTERN_DATA16 g_uBs3TrapEipHint
42	%endif
43	TMPL_BEGIN_TEXT
44
45	BS3_EXTERN_CMN Bs3SelProtFar32ToFlat32
46	BS3_EXTERN_CMN Bs3RegCtxConvertToRingX
47	BS3_EXTERN_CMN Bs3RegCtxRestore
48	BS3_EXTERN_CMN Bs3Panic
49
50	BS3_BEGIN_TEXT16
51	extern Bs3PrintStrN_c16_CX_Bytes_At_DS_SI
52	TMPL_BEGIN_TEXT
53
54
55	;;
56	; System call handler.
57	;
58	; This is an assembly trap handler that is called in response to a system call
59	; request from 'user' code. The only fixed parameter is [ER]AX which contains
60	; the system call number. Other registers are assigned on a per system call
61	; basis, ditto for which registers are preserved and which are used to return
62	; stuff. Generally, though, we preserve all registers not used as return
63	; values or otherwise implicitly transformed by the call.
64	;
65	; Note! The 16-bit versions of this code must be careful with using extended
66	; registers as we wish this code to work on real 80286 (maybe even 8086)
67	; CPUs too!
68	;
69	BS3_PROC_BEGIN_MODE Bs3TrapSystemCallHandler, BS3_PBC_NEAR ; Near because we'll probably only ever need this from CGROUP16.
70	;
71	; This prologue is kind of complicated because of 80286 and older CPUs
72	; as well as different requirements for 64-bit and the other modes.
73	;
74	%define VAR_CALLER_BP [xBP]
75	%if TMPL_BITS != 64
76	%define VAR_CALLER_DS [xBP - xCB]
77	%endif
78	%define VAR_CALLER_BX [xBP - sCB*1 - xCB] ; Note! the upper word is not clean on pre-386 (16-bit mode).
79	%define VAR_CALLER_AX [xBP - sCB*2 - xCB]
80	%define VAR_CALLER_CX [xBP - sCB*3 - xCB]
81	%define VAR_CALLER_DX [xBP - sCB*4 - xCB]
82	%define VAR_CALLER_SI [xBP - sCB*5 - xCB]
83	%define VAR_CALLER_SI_HI [xBP - sCB*5 - xCB + 2]
84	%define VAR_CALLER_DI [xBP - sCB*6 - xCB]
85	%define VAR_CALLER_DI_HI [xBP - sCB*6 - xCB + 2]
86	%if TMPL_BITS == 16
87	%define VAR_CALLER_EBP [xBP - sCB*7 - xCB]
88	%define VAR_CALLER_ESP [xBP - sCB*8 - xCB]
89	%define VAR_CALLER_EFLAGS [xBP - sCB*9 - xCB]
90	%define VAR_CALLER_MODE [xBP - sCB9 - xCB2]
91	%define BP_TOP_STACK_EXPR xBP - sCB9 - xCB2
92	%else
93	%define VAR_CALLER_MODE [xBP - sCB6 - xCB2]
94	%define BP_TOP_STACK_EXPR xBP - sCB6 - xCB2
95	%endif
96	push xBP
97	mov xBP, xSP
98	%if TMPL_BITS == 64
99	push 0
100	mov [rsp+2], es
101	mov [rsp], ds
102	%else
103	push ds
104	%ifdef TMPL_CMN_R86
105	push BS3_SEL_DATA16
106	%else
107	push RT_CONCAT(BS3_SEL_R0_DS,TMPL_BITS)
108	%endif
109	pop ds ; DS = BS3KIT_GRPNM_DATA16 or FLAT and we can safely access data
110	%if TMPL_BITS == 16 && (TMPL_MODE == BS3_MODE_RM \|\| TMPL_MODE == BS3_MODE_PE16)
111	cmp byte [BS3_DATA16_WRT(g_uBs3CpuDetected)], BS3CPU_80286
112	jbe .prologue_pre_80386
113	%endif
114	%endif
115	push sBX
116	push sAX
117	push sCX
118	push sDX
119	push sSI
120	push sDI
121	%if TMPL_BITS == 16
122	push ebp
123	push esp
124	pushfd
125	%if TMPL_MODE == BS3_MODE_RM \|\| TMPL_MODE == BS3_MODE_PE16
126	jmp .prologue_end
127
128	.prologue_pre_80386:
129	push bx ; dummy
130	push bx
131	xor bx, bx
132	push bx ; dummy
133	push ax
134	push bx ; dummy
135	push cx
136	push bx ; dummy
137	push dx
138	push bx ; dummy
139	push si
140	push bx ; dummy
141	push di
142	sub sp, 0ch ; dummy
143	%endif
144	%endif
145	.prologue_end:
146
147	;
148	; VAR_CALLER_MODE: Save the current mode (important for v8086 with 16-bit kernel).
149	;
150	xor xBX, xBX
151	mov bl, [BS3_DATA16_WRT(g_bBs3CurrentMode)]
152	push xBX
153
154	;
155	; Dispatch the system call.
156	;
157	cmp ax, BS3_SYSCALL_LAST
158	ja .invalid_syscall
159	%if TMPL_BITS == 16
160	mov bx, ax
161	shl bx, 1
162	jmp word [cs:.aoffSyscallHandlers + bx]
163	%else
164	movzx ebx, ax
165	mov ebx, [.aoffSyscallHandlers + ebx * 4]
166	jmp xBX
167	%endif
168	.aoffSyscallHandlers:
169	%ifdef TMPL_16BIT
170	dw .invalid_syscall wrt CGROUP16
171	dw .print_chr wrt CGROUP16
172	dw .print_str wrt CGROUP16
173	dw .to_ringX wrt CGROUP16
174	dw .to_ringX wrt CGROUP16
175	dw .to_ringX wrt CGROUP16
176	dw .to_ringX wrt CGROUP16
177	dw .restore_ctx wrt CGROUP16
178	%else
179	dd .invalid_syscall wrt FLAT
180	dd .print_chr wrt FLAT
181	dd .print_str wrt FLAT
182	dd .to_ringX wrt FLAT
183	dd .to_ringX wrt FLAT
184	dd .to_ringX wrt FLAT
185	dd .to_ringX wrt FLAT
186	dd .restore_ctx wrt FLAT
187	%endif
188
189	;
190	; Invalid system call.
191	;
192	.invalid_syscall:
193	int3
194	jmp .return
195
196	;
197	; Print char in the CL register.
198	;
199	; We use the vga bios teletype interrupt to do the writing, so we must
200	; be in some kind of real mode for this to work. 16-bit code segment
201	; requried for the mode switching code.
202	;
203	BS3_BEGIN_TEXT16
204	BS3_SET_BITS TMPL_BITS
205	.print_chr:
206	%if TMPL_BITS != 64
207	push es
208	mov di, ss ; Must save and restore SS for supporting 16/32 and 32/16 caller/kernel ring-0 combinations.
209	%endif
210	%ifndef TMPL_CMN_R86
211	; Switch to real mode (20h param scratch area not required).
212	extern TMPL_NM(Bs3SwitchToRM)
213	call TMPL_NM(Bs3SwitchToRM)
214	BS3_SET_BITS 16
215	%endif
216
217	; Print the character, turning '\n' into '\r\n'.
218	cmp cl, 0ah ; \n
219	je .print_chr_newline
220	mov ah, 0eh
221	mov al, cl
222	mov bx, 0ff00h
223	int 10h
224	jmp .print_chr_done
225
226	.print_chr_newline:
227	mov ax, 0e0dh ; cmd + \r
228	mov bx, 0ff00h
229	int 10h
230	mov ax, 0e0ah ; cmd + \n
231	mov bx, 0ff00h
232	int 10h
233
234	.print_chr_done:
235	%ifndef TMPL_CMN_R86
236	; Switch back (20h param scratch area not required).
237	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_rm)
238	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_rm)
239	BS3_SET_BITS TMPL_BITS
240	%endif
241	%if TMPL_BITS != 64
242	mov ss, di
243	pop es
244	%endif
245	jmp .return
246	TMPL_BEGIN_TEXT
247
248
249	;
250	; Prints DX chars from the string pointed to by CX:xSI to the screen.
251	;
252	; We use the vga bios teletype interrupt to do the writing, so we must
253	; be in some kind of real mode for this to work. The string must be
254	; accessible from real mode too.
255	;
256	.print_str:
257	%if TMPL_BITS != 64
258	push es
259	%endif
260	; Convert the incoming pointer to real mode (assuming caller checked
261	; that real mode can access it).
262	call .convert_ptr_arg_to_real_mode_ax_si
263	mov cx, VAR_CALLER_DX
264
265	; Switch to real mode (no 20h scratch required)
266	%ifndef TMPL_CMN_R86
267	%if TMPL_BITS != 16
268	jmp .print_str_to_16bit
269	BS3_BEGIN_TEXT16
270	.print_str_to_16bit:
271	BS3_SET_BITS TMPL_BITS
272	%endif
273	extern TMPL_NM(Bs3SwitchToRM)
274	call TMPL_NM(Bs3SwitchToRM)
275	BS3_SET_BITS 16
276	%endif
277	; Call code in Bs3PrintStrN to do the work.
278	mov ds, ax
279	call Bs3PrintStrN_c16_CX_Bytes_At_DS_SI
280
281	; Switch back (20h param scratch area not required).
282	%ifndef TMPL_CMN_R86
283	extern RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_rm)
284	call RT_CONCAT3(_Bs3SwitchTo,TMPL_MODE_UNAME,_rm)
285	%if TMPL_BITS != 16
286	BS3_SET_BITS TMPL_BITS
287	jmp .print_str_end
288	TMPL_BEGIN_TEXT
289	%endif
290	.print_str_end:
291	%endif
292	%if TMPL_BITS != 64
293	pop es
294	%endif
295	jmp .return
296
297
298	;
299	; Switch the caller to ring-0, ring-1, ring-2 or ring-3.
300	;
301	; This implement this by saving the entire register context, calling
302	; a transformation function (C) and restoring the modified register
303	; context using a generic worker.
304	;
305	.to_ringX:
306	sub xSP, BS3REGCTX_size
307	mov xBX, xSP ; xBP = BS3REGCTX pointer.
308	call .save_context
309
310	%if TMPL_BITS == 32
311	; Convert xBP to flat pointer in 32-bit
312	push ss
313	push xBX
314	call Bs3SelProtFar32ToFlat32
315	add sSP, 8
316	mov xBX, xAX
317	%endif
318	push xBX ; Save pointer for the final restore call.
319
320	; Convert the register context from whatever it is to ring-0.
321	BONLY64 sub rsp, 10h
322	mov ax, VAR_CALLER_AX
323	sub ax, BS3_SYSCALL_TO_RING0
324	push xAX
325	BONLY16 push ss
326	push xBX
327	BS3_CALL Bs3RegCtxConvertToRingX, 2
328	add xSP, sCB + xCB BS3_ONLY_64BIT(+ 10h)
329
330	; Restore the register context (does not return).
331	pop xBX ; restore saved pointer.
332	BONLY64 sub rsp, 18h
333	BONLY16 push ss
334	push xBX
335	BS3_CALL Bs3RegCtxRestore, 1
336	jmp Bs3Panic
337
338
339	;
340	; Restore context pointed to by cx:xSI.
341	;
342	.restore_ctx:
343	call .convert_ptr_arg_to_cx_xSI
344	BONLY64 sub rsp, 10h
345	mov xDX, VAR_CALLER_DX
346	push xDX
347	BONLY16 push cx
348	push xSI
349	BS3_CALL Bs3RegCtxRestore, 2
350	jmp Bs3Panic
351
352	;
353	; Return.
354	;
355	.return:
356	pop xBX ; saved mode
357	mov [BS3_DATA16_WRT(g_bBs3CurrentMode)], bl
358	%if TMPL_BITS == 16
359	and bl, BS3_MODE_CODE_MASK
360	cmp bl, BS3_MODE_CODE_V86
361	je .return_to_v8086_from_16bit_krnl
362	cmp bl, BS3_MODE_CODE_32
363	je .return_to_32bit_from_16bit_krnl
364	%if TMPL_MODE == BS3_MODE_RM \|\| TMPL_MODE == BS3_MODE_PE16
365	cmp byte [BS3_DATA16_WRT(g_uBs3CpuDetected)], BS3CPU_80286
366	jbe .return_pre_80386
367	%endif
368
369	popfd
370	pop esp
371	pop ebp
372	%endif
373	pop sDI
374	pop sSI
375	pop sDX
376	pop sCX
377	pop sAX
378	pop sBX
379	%if TMPL_BITS != 64
380	pop ds
381	leave
382	iret
383	%else
384	mov es, [rsp+2]
385	mov ds, [rsp]
386	leave ; skips ds
387	iretq
388	%endif
389
390	%if TMPL_BITS == 16
391	%if TMPL_MODE == BS3_MODE_RM \|\| TMPL_MODE == BS3_MODE_PE16
392	; Variant of the above for 80286 and older.
393	.return_pre_80386:
394	add sp, 0ch
395	pop di
396	pop bx ; dummy
397	pop si
398	pop bx ; dummy
399	pop dx
400	pop bx ; dummy
401	pop cx
402	pop bx ; dummy
403	pop ax
404	pop bx ; dummy
405	pop bx ; pushed twice
406	pop bx
407	pop ds
408	pop bp
409	iret
410	%endif
411
412	.return_to_v8086_from_16bit_krnl:
413	int3
414	jmp .return_to_v8086_from_16bit_krnl
415
416	;
417	; Returning to 32-bit code may require us to expand and seed the eip
418	; and esp addresses in the iret frame since these are truncated when
419	; using a 16-bit interrupt handler.
420	;
421	; Incoming stack: New stack diff cpl:
422	; bp + 0ah: [ss]
423	; bp + 08h: [sp] bx + 38h: [ss] New stack same cpl:
424	; bp + 06h: flags
425	; bp + 04h: cs bx + 34h: [esp] bx + 30h: eflags
426	; bp + 02h: ip
427	; -------------- bx + 30h: eflags bx + 2ch: cs
428	; bp + 00h: bp
429	; bp - 02h: ds bx + 2ch: cs bx + 28h: eip
430	; -------------
431	; bp - 06h: ebx bx + 28h: eip bx + 26h: bp
432	; -------------- bx + 24h: ds
433	; bp - 0ah: eax bx + 26h: bp
434	; bx + 24h: ds bx + 20h: ebx
435	; bp - 0eh: ecx
436	; bx + 20h: ebx bx + 1ch: eax
437	; bp - 12h: edx
438	; bx + 1ch: eax bx + 18h: ecx
439	; bp - 16h: esi
440	; bx + 18h: ecx bx + 14h: edx
441	; bp - 1ah: edi
442	; bx + 14h: edx bx + 10h: esi
443	; bp - 1eh: esp
444	; bx + 10h: esi bx + 0ch: edi
445	; bp - 22h: ebp
446	; bx + 0ch: edi bx + 08h: esp
447	; bp - 26h: eflags
448	; bx + 08h: esp bx + 04h: ebp
449	;
450	; bx + 04h: ebp bx + 00h: eflags
451	;
452	; bx + 00h: eflags
453	;
454	;
455	; If we're returning to the same CPL, we're still using the stack of
456	; the 32-bit caller. The high ESP word does not need restoring.
457	;
458	; If we're returning to a lower CPL, there on a 16-bit ring-0 stack,
459	; however, the high ESP word is still that of the caller.
460	;
461	.return_to_32bit_from_16bit_krnl:
462	mov ax, cs
463	and al, 3
464	mov ah, 3
465	and ah, [xBP + xCB*2]
466	; The iret frame doubles in size, so allocate more stack.
467	cmp al, ah
468	je .return_to_32bit_from_16bit_krnl_same_cpl_sub_sp
469	sub sp, 2*2
470	.return_to_32bit_from_16bit_krnl_same_cpl_sub_sp:
471	sub sp, 3*2
472	mov bx, sp
473	; Copy the saved registers.
474	xor di, di
475	.return_to_32bit_from_16bit_krnl_copy_loop:
476	mov ecx, [bp + di - 26h]
477	mov [ss:bx + di], ecx
478	add di, 4
479	cmp di, 28h
480	jb .return_to_32bit_from_16bit_krnl_copy_loop
481	; Convert the 16-bit iret frame to a 32-bit iret frame.
482	mov ecx, [BS3_DATA16_WRT(g_uBs3TrapEipHint)]
483	mov cx, [bp + 02h] ; ip
484	mov [ss:bx + 28h], ecx
485	mov ecx, 0f00d0000h
486	mov cx, [bp + 04h] ; cs
487	mov [ss:bx + 2ch], ecx
488	mov ecx, [ss:bx] ; caller eflags
489	mov cx, [bp + 06h] ; flags
490	mov [ss:bx + 30h], ecx
491	cmp al, ah
492	jz .return_to_32bit_from_16bit_krnl_do_return
493	mov ecx, [ss:bx + 08h] ; caller esp
494	mov cx, [bp + 08h] ; sp
495	mov [ss:bx + 34h], ecx
496	mov ecx, 0f00d0000h
497	mov cx, [bp + 0ah] ; ss
498	mov [ss:bx + 38h], ecx
499	.return_to_32bit_from_16bit_krnl_do_return:
500	popfd
501	pop ecx ; esp - only the high bits!
502	mov cx, sp
503	mov esp, ecx
504	pop ebp
505	lea bp, [bx + 26h]
506	pop edi
507	pop esi
508	pop edx
509	pop ecx
510	pop eax
511	pop ebx
512	pop ds
513	leave
514	iretd
515
516	%endif ; 16-bit
517
518
519	;
520	; Internal function. ss:xBX = Pointer to register frame (BS3REGCTX).
521	; @uses xAX
522	;
523	.save_context:
524	%if TMPL_BITS == 16
525	cmp byte [BS3_DATA16_WRT(g_uBs3CpuDetected)], BS3CPU_80386
526	jae .save_context_full
527
528	;
529	; 80286 or earlier.
530	;
531
532	; Clear the state area first.
533	push di
534	xor di, di
535	.save_context_16_clear_loop:
536	mov word [ss:bx + di], 0
537	mov word [ss:bx + di + 2], 0
538	mov word [ss:bx + di + 4], 0
539	mov word [ss:bx + di + 6], 0
540	add di, 8
541	cmp di, BS3REGCTX_size
542	jb .save_context_16_clear_loop
543	pop di
544
545	; Do the 8086/80186/80286 state saving.
546	mov ax, VAR_CALLER_AX
547	mov [ss:bx + BS3REGCTX.rax], ax
548	mov cx, VAR_CALLER_CX
549	mov [ss:bx + BS3REGCTX.rcx], ax
550	mov ax, VAR_CALLER_DX
551	mov [ss:bx + BS3REGCTX.rdx], ax
552	mov ax, VAR_CALLER_BX
553	mov [ss:bx + BS3REGCTX.rbx], ax
554	mov [ss:bx + BS3REGCTX.rsi], si
555	mov [ss:bx + BS3REGCTX.rdi], di
556	mov ax, VAR_CALLER_BP
557	mov [ss:bx + BS3REGCTX.rbp], ax
558	mov ax, VAR_CALLER_DS
559	mov [ss:bx + BS3REGCTX.ds], ax
560	mov [ss:bx + BS3REGCTX.es], es
561	mov ax, [xBP + xCB]
562	mov [ss:bx + BS3REGCTX.rip], ax
563	mov ax, [xBP + xCB*2]
564	mov [ss:bx + BS3REGCTX.cs], ax
565	and al, X86_SEL_RPL
566	mov [ss:bx + BS3REGCTX.bCpl], al
567	cmp al, 0
568	je .save_context_16_same
569	mov ax, [xBP + xCB*4]
570	mov [ss:bx + BS3REGCTX.rsp], ax
571	mov ax, [xBP + xCB*5]
572	mov [ss:bx + BS3REGCTX.ss], ax
573	jmp .save_context_16_done_stack
574	.save_context_16_same:
575	mov ax, bp
576	add ax, xCB * (1 + 3)
577	mov [ss:bx + BS3REGCTX.rsp], ax
578	mov ax, ss
579	mov [ss:bx + BS3REGCTX.ss], ax
580	.save_context_16_done_stack:
581	mov ax, [xBP + xCB*3]
582	mov [ss:bx + BS3REGCTX.rflags], ax
583	mov al, VAR_CALLER_MODE
584	mov [ss:bx + BS3REGCTX.bMode], al
585	cmp byte [BS3_DATA16_WRT(g_uBs3CpuDetected)], BS3CPU_80286
586	jne .save_context_16_return
587	smsw [ss:bx + BS3REGCTX.cr0]
588	str [ss:bx + BS3REGCTX.tr]
589	sldt [ss:bx + BS3REGCTX.ldtr]
590	.save_context_16_return:
591	or byte [ss:bx + BS3REGCTX.fbFlags], BS3REG_CTX_F_NO_AMD64 \| BS3REG_CTX_F_NO_CR4
592	ret
593	%endif ; TMPL_BITS == 16
594
595	;
596	; 80386 or later.
597	;
598	.save_context_full:
599
600	; Clear the state area.
601	push xDI
602	xor xDI, xDI
603	AssertCompileSizeAlignment(BS3REGCTX, 16)
604	.save_context_full_clear_loop:
605	%if TMPL_BITS != 64
606	mov dword [ss:xBX + xDI], 0
607	mov dword [ss:xBX + xDI + 4], 0
608	add xDI, 8
609	%else
610	mov qword [xBX + xDI], 0
611	mov qword [xBX + xDI + 8], 0
612	add xDI, 10h
613	%endif
614	cmp xDI, BS3REGCTX_size
615	jb .save_context_full_clear_loop
616	pop xDI
617
618	; Do the 386+ state saving.
619	%if TMPL_BITS == 16 ; save the high word of registered pushed on the stack.
620	mov ecx, VAR_CALLER_AX
621	mov [ss:bx + BS3REGCTX.rax], ecx
622	mov ecx, VAR_CALLER_CX
623	mov [ss:bx + BS3REGCTX.rcx], ecx
624	mov ecx, VAR_CALLER_DX
625	mov [ss:bx + BS3REGCTX.rdx], ecx
626	mov ecx, VAR_CALLER_BX
627	mov [ss:bx + BS3REGCTX.rbx], ecx
628	mov ecx, VAR_CALLER_EBP
629	mov [ss:bx + BS3REGCTX.rbp], ecx
630	mov ecx, VAR_CALLER_ESP
631	mov [ss:bx + BS3REGCTX.rsp], ecx
632	mov ecx, VAR_CALLER_SI
633	mov [ss:bx + BS3REGCTX.rsi], ecx
634	mov ecx, VAR_CALLER_DI
635	mov [ss:bx + BS3REGCTX.rdi], ecx
636	mov ecx, VAR_CALLER_EFLAGS
637	mov [ss:bx + BS3REGCTX.rflags], ecx
638
639	; Seed high EIP word if 32-bit CS.
640	lar ecx, [bp + 4]
641	jnz .save_context_full_done_16bit_high_word
642	test ecx, X86LAR_F_D
643	jz .save_context_full_done_16bit_high_word
644	mov ecx, [BS3_DATA16_WRT(g_uBs3TrapEipHint)]
645	mov [ss:bx + BS3REGCTX.rip], ecx
646	.save_context_full_done_16bit_high_word:
647	%endif ; 16-bit
648	mov xAX, VAR_CALLER_AX
649	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rax], xAX
650	mov xCX, VAR_CALLER_CX
651	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rcx], xCX
652	mov xAX, VAR_CALLER_DX
653	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rdx], xAX
654	mov xAX, VAR_CALLER_BX
655	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rbx], xAX
656	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rsi], sSI
657	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rdi], sDI
658	mov xAX, VAR_CALLER_BP
659	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rbp], xAX
660	%if TMPL_BITS != 64
661	mov ax, VAR_CALLER_DS
662	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.ds], ax
663	%else
664	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.ds], ds
665	%endif
666	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.es], es
667	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.fs], fs
668	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.gs], gs
669	mov xAX, [xBP + xCB]
670	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rip], xAX
671	mov ax, [xBP + xCB*2]
672	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.cs], ax
673	%if TMPL_MODE != BS3_MODE_RM
674	and al, X86_SEL_RPL
675	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.bCpl], al
676	cmp al, 0
677	je .save_context_full_same
678	mov xAX, [xBP + xCB*4]
679	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rsp], xAX
680	mov ax, [xBP + xCB*5]
681	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.ss], ax
682	jmp .save_context_full_done_stack
683	%else
684	mov byte [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.bCpl], 0
685	%endif
686	.save_context_full_same:
687	mov xAX, xBP
688	add xAX, xCB * (1 + 3)
689	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rsp], xAX
690	mov ax, ss
691	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.ss], ax
692	.save_context_full_done_stack:
693	mov xAX, [xBP + xCB*3]
694	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rflags], xAX
695
696	mov al, VAR_CALLER_MODE
697	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.bMode], al
698	%if TMPL_BITS == 64
699	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.r8], r8
700	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.r9], r9
701	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.r10], r10
702	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.r11], r11
703	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.r12], r12
704	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.r13], r13
705	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.r14], r14
706	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.r15], r15
707	%endif
708	str [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.tr]
709	sldt [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.ldtr]
710	mov sAX, cr0
711	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.cr0], sAX
712	mov sAX, cr2
713	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.cr2], sAX
714	mov sAX, cr3
715	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.cr3], sAX
716	%if TMPL_BITS != 64
717	test byte [BS3_DATA16_WRT(g_uBs3CpuDetected)], (BS3CPU_F_CPUID >> 8)
718	jnz .have_cr4
719	or byte [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.fbFlags], BS3REG_CTX_F_NO_CR4
720	jmp .done_cr4
721	.have_cr4:
722	%endif
723	mov sAX, cr4
724	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.cr4], sAX
725	%if TMPL_BITS != 64
726	.done_cr4:
727	or byte [ss:xBX + BS3REGCTX.fbFlags], BS3REG_CTX_F_NO_AMD64
728
729	; Deal with extended v8086 frame.
730	%if TMPL_BITS == 32
731	test dword [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rflags], X86_EFL_VM
732	jz .save_context_full_return
733	%else
734	test byte VAR_CALLER_MODE, BS3_MODE_CODE_V86
735	jz .save_context_full_return
736	mov dword [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rflags], X86_EFL_VM
737	%endif
738	mov xAX, [xBP + xCB*4]
739	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.rsp], xAX
740	mov ax, [xBP + xCB*5]
741	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.ss], ax
742	mov ax, [xBP + xCB*6]
743	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.es], ax
744	mov ax, [xBP + xCB*7]
745	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.ds], ax
746	mov ax, [xBP + xCB*8]
747	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.fs], ax
748	mov ax, [xBP + xCB*9]
749	mov [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.gs], ax
750	mov byte [BS3_NOT_64BIT(ss:) xBX + BS3REGCTX.bCpl], 3
751	jmp .save_context_full_return
752
753	%endif ; !64-bit
754
755	.save_context_full_return:
756	ret
757
758	%if TMPL_BITS == 16
759	CPU 286
760	%endif
761
762	;
763	; Internal function for converting a syscall pointer parameter (cx:xSI)
764	; to a pointer we can use here in this context.
765	;
766	; Returns the result in cx:xSI.
767	; @uses xAX, xCX, xDX
768	;
769	.convert_ptr_arg_to_cx_xSI:
770	call .convert_ptr_arg_to_flat
771	%if TMPL_BITS == 16
772	; Convert to tiled address.
773	mov si, ax ; offset.
774	shl dx, X86_SEL_SHIFT
775	add dx, BS3_SEL_TILED
776	mov cx, dx
777	%else
778	; Just supply a flat selector.
779	mov xSI, xAX
780	mov cx, ds
781	%endif
782	ret
783
784	;
785	; Internal function for converting a syscall pointer parameter (caller CX:xSI)
786	; to a real mode pointer.
787	;
788	; Returns the result in AX:SI.
789	; @uses xAX, xCX, xDX
790	;
791	.convert_ptr_arg_to_real_mode_ax_si:
792	call .convert_ptr_arg_to_flat
793	mov si, ax
794	%if TMPL_BITS == 16
795	mov ax, dx
796	%else
797	shr eax, 16
798	%endif
799	shl ax, 12
800	ret
801
802	;
803	; Internal function for the above that wraps the Bs3SelProtFar32ToFlat32 call.
804	;
805	; @returns eax (32-bit, 64-bit), dx+ax (16-bit).
806	; @uses eax, ecx, edx
807	;
808	.convert_ptr_arg_to_flat:
809	%if TMPL_BITS == 16
810	; Convert to (32-bit) flat address first.
811	test byte VAR_CALLER_MODE, BS3_MODE_CODE_V86
812	jz .convert_ptr_arg_to_flat_prot_16
813
814	mov ax, VAR_CALLER_CX
815	mov dx, ax
816	shl ax, 4
817	shr dx, 12
818	add ax, VAR_CALLER_SI
819	adc dx, 0
820	ret
821
822	.convert_ptr_arg_to_flat_prot_16:
823	push es
824	push bx
825	push word VAR_CALLER_CX ; selector
826	xor ax, ax
827	test byte VAR_CALLER_MODE, BS3_MODE_CODE_16
828	jnz .caller_is_16_bit
829	mov ax, VAR_CALLER_SI_HI
830	.caller_is_16_bit:
831	push ax ; offset high
832	push word VAR_CALLER_SI ; offset low
833	call Bs3SelProtFar32ToFlat32
834	add sp, 2*3
835	pop bx
836	pop es
837	ret
838
839	%else ; 32 or 64 bit
840	test byte VAR_CALLER_MODE, BS3_MODE_CODE_V86
841	jz .convert_ptr_arg_to_cx_xSI_prot
842
843	; Convert real mode address to flat address and return it.
844	movzx eax, word VAR_CALLER_CX
845	shl eax, 4
846	movzx edx, word VAR_CALLER_SI
847	add eax, edx
848	ret
849
850	; Convert to (32-bit) flat address.
851	.convert_ptr_arg_to_cx_xSI_prot:
852	%if TMPL_BITS == 64
853	push r11
854	push r10
855	push r9
856	push r8
857	sub rsp, 10h
858	%endif
859	movzx ecx, word VAR_CALLER_CX
860	push xCX
861	mov eax, VAR_CALLER_SI
862	test byte VAR_CALLER_MODE, BS3_MODE_CODE_16
863	jz .no_masking_offset
864	and eax, 0ffffh
865	.no_masking_offset:
866	push xAX
867	BS3_CALL Bs3SelProtFar32ToFlat32,2
868	add xSP, xCB*2 BS3_ONLY_64BIT(+ 10h)
869	%if TMPL_BITS == 64
870	pop r8
871	pop r9
872	pop r10
873	pop r11
874	%endif
875	%endif
876	ret
877
878	BS3_PROC_END_MODE Bs3TrapSystemCallHandler
879

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/ValidationKit/bootsectors/bs3kit/bs3-mode-TrapSystemCallHandler.asm@ 66112

Download in other formats: