bs3kit.h@ 76776

Last change on this file since 76776 was 76579, checked in by vboxsync, 6 years ago
ValKit: scm header guard alignment.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 161.4 KB

Line
1	/* $Id: bs3kit.h 76579 2019-01-01 06:14:44Z vboxsync $ */
2	/** @file
3	* BS3Kit - structures, symbols, macros and stuff.
4	*/
5
6	/*
7	* Copyright (C) 2007-2019 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*
17	* The contents of this file may alternatively be used under the terms
18	* of the Common Development and Distribution License Version 1.0
19	* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
20	* VirtualBox OSE distribution, in which case the provisions of the
21	* CDDL are applicable instead of those of the GPL.
22	*
23	* You may elect to license modified versions of this file under the
24	* terms and conditions of either the GPL or the CDDL or both.
25	*/
26
27	#ifndef BS3KIT_INCLUDED_bs3kit_h
28	#define BS3KIT_INCLUDED_bs3kit_h
29	#ifndef RT_WITHOUT_PRAGMA_ONCE
30	# pragma once
31	#endif
32
33	#ifndef DOXYGEN_RUNNING
34	# undef IN_RING0
35	# define IN_RING0
36	#endif
37
38	#define RT_NO_STRICT /* Don't drag in IPRT assertion code in inline code we may use (asm.h). */
39	#include <iprt/cdefs.h>
40	#include <iprt/types.h>
41
42	#ifndef DOXYGEN_RUNNING
43	# undef IN_RING0
44	#endif
45
46	/*
47	* Make asm.h and friend compatible with our 64-bit assembly config (ASM_CALL64_MSC).
48	*/
49	#if defined(__GNUC__) && ARCH_BITS == 64
50	# undef DECLASM
51	# ifdef __cplusplus
52	# define DECLASM(type) extern "C" type BS3_CALL
53	# else
54	# define DECLASM(type) type BS3_CALL
55	# endif
56	#endif
57
58
59	/*
60	* Work around ms_abi trouble in the gcc camp (gcc bugzilla #50818).
61	* ASSUMES all va_lists are in functions with
62	*/
63	#if defined(__GNUC__) && ARCH_BITS == 64
64	# undef va_list
65	# undef va_start
66	# undef va_end
67	# undef va_copy
68	# define va_list __builtin_ms_va_list
69	# define va_start(a_Va, a_Arg) __builtin_ms_va_start(a_Va, a_Arg)
70	# define va_end(a_Va) __builtin_ms_va_end(a_Va)
71	# define va_copy(a_DstVa, a_SrcVa) __builtin_ms_va_copy(a_DstVa, a_SrcVa)
72	#endif
73
74
75	/** @def BS3_USE_ALT_16BIT_TEXT_SEG
76	* @ingroup grp_bs3kit
77	* Combines the BS3_USE_RM_TEXT_SEG, BS3_USE_X0_TEXT_SEG, and
78	* BS3_USE_X1_TEXT_SEG indicators into a single one.
79	*/
80	#if defined(BS3_USE_RM_TEXT_SEG) \|\| defined(BS3_USE_X0_TEXT_SEG) \|\| defined(BS3_USE_X1_TEXT_SEG) \|\| defined(DOXYGEN_RUNNING)
81	# define BS3_USE_ALT_16BIT_TEXT_SEG
82	#else
83	# undef BS3_USE_ALT_16BIT_TEXT_SEG
84	#endif
85
86	/** @def BS3_USE_X0_TEXT_SEG
87	* @ingroup grp_bs3kit
88	* Emit 16-bit code to the BS3X0TEXT16 segment - ignored for 32-bit and 64-bit.
89	*
90	* Calling directly into the BS3X0TEXT16 segment is only possible in real-mode
91	* and v8086 mode. In protected mode the real far pointer have to be converted
92	* to a protected mode pointer that uses BS3_SEL_X0TEXT16_CS, Bs3TestDoModes and
93	* associates does this automatically.
94	*/
95	#ifdef DOXYGEN_RUNNING
96	# define BS3_USE_X0_TEXT_SEG
97	#endif
98
99	/** @def BS3_USE_X1_TEXT_SEG
100	* @ingroup grp_bs3kit
101	* Emit 16-bit code to the BS3X1TEXT16 segment - ignored for 32-bit and 64-bit.
102	*
103	* Calling directly into the BS3X1TEXT16 segment is only possible in real-mode
104	* and v8086 mode. In protected mode the real far pointer have to be converted
105	* to a protected mode pointer that uses BS3_SEL_X1TEXT16_CS, Bs3TestDoModes and
106	* associates does this automatically.
107	*/
108	#ifdef DOXYGEN_RUNNING
109	# define BS3_USE_X1_TEXT_SEG
110	#endif
111
112	/** @def BS3_USE_RM_TEXT_SEG
113	* @ingroup grp_bs3kit
114	* Emit 16-bit code to the BS3RMTEXT16 segment - ignored for 32-bit and 64-bit.
115	*
116	* This segment is normally used for real-mode only code, though
117	* BS3_SEL_RMTEXT16_CS can be used to call it from protected mode. Unlike the
118	* BS3X0TEXT16 and BS3X1TEXT16 segments which are empty by default, this segment
119	* is used by common BS3Kit code.
120	*/
121	#ifdef DOXYGEN_RUNNING
122	# define BS3_USE_X0_TEXT_SEG
123	#endif
124
125	/** @def BS3_MODEL_FAR_CODE
126	* @ingroup grp_bs3kit
127	* Default compiler model indicates far code.
128	*/
129	#ifdef DOXYGEN_RUNNING
130	# define BS3_MODEL_FAR_CODE
131	#elif !defined(BS3_MODEL_FAR_CODE) && (defined(__LARGE__) \|\| defined(__MEDIUM__) \|\| defined(__HUGE__)) && ARCH_BITS == 16
132	# define BS3_MODEL_FAR_CODE
133	#endif
134
135
136	/*
137	* We normally don't want the noreturn / aborts attributes as they mess up stack traces.
138	*
139	* Note! pragma aux <fnname> aborts can only be used with functions
140	* implemented in C and functions that does not have parameters.
141	*/
142	#define BS3_KIT_WITH_NO_RETURN
143	#ifndef BS3_KIT_WITH_NO_RETURN
144	# undef DECL_NO_RETURN
145	# define DECL_NO_RETURN(type) type
146	#endif
147
148
149	/*
150	* We may want to reuse some IPRT code in the common name space, so we
151	* redefine the RT_MANGLER to work like BS3_CMN_NM. (We cannot use
152	* BS3_CMN_NM yet, as we need to include IPRT headers with function
153	* declarations before we can define it. Thus the duplciate effort.)
154	*/
155	#if ARCH_BITS == 16
156	# undef RTCALL
157	# if defined(BS3_USE_ALT_16BIT_TEXT_SEG)
158	# define RTCALL __cdecl __far
159	# define RT_MANGLER(a_Name) RT_CONCAT(a_Name,_f16)
160	# else
161	# define RTCALL __cdecl __near
162	# define RT_MANGLER(a_Name) RT_CONCAT(a_Name,_c16)
163	# endif
164	#else
165	# define RT_MANGLER(a_Name) RT_CONCAT3(a_Name,_c,ARCH_BITS)
166	#endif
167	#include <iprt/mangling.h>
168	#include <iprt/x86.h>
169	#include <iprt/err.h>
170
171	/*
172	* Include data symbol mangling (function mangling/mapping must be done
173	* after the protypes).
174	*/
175	#include "bs3kit-mangling-data.h"
176
177
178
179	RT_C_DECLS_BEGIN
180
181	/** @defgroup grp_bs3kit BS3Kit - Boot Sector Kit \#3
182	*
183	* The BS3Kit is a framework for bare metal floppy/usb image tests,
184	* see the @ref pg_bs3kit "doc page" for more.
185	*
186	* @{ */
187
188	/** @name Execution modes.
189	* @{ */
190	#define BS3_MODE_INVALID UINT8_C(0x00)
191	#define BS3_MODE_RM UINT8_C(0x01) /*< real mode. /
192	#define BS3_MODE_PE16 UINT8_C(0x11) /*< 16-bit protected mode kernel+tss, running 16-bit code, unpaged. /
193	#define BS3_MODE_PE16_32 UINT8_C(0x12) /*< 16-bit protected mode kernel+tss, running 32-bit code, unpaged. /
194	#define BS3_MODE_PE16_V86 UINT8_C(0x18) /*< 16-bit protected mode kernel+tss, running virtual 8086 mode code, unpaged. /
195	#define BS3_MODE_PE32 UINT8_C(0x22) /*< 32-bit protected mode kernel+tss, running 32-bit code, unpaged. /
196	#define BS3_MODE_PE32_16 UINT8_C(0x21) /*< 32-bit protected mode kernel+tss, running 16-bit code, unpaged. /
197	#define BS3_MODE_PEV86 UINT8_C(0x28) /*< 32-bit protected mode kernel+tss, running virtual 8086 mode code, unpaged. /
198	#define BS3_MODE_PP16 UINT8_C(0x31) /*< 16-bit protected mode kernel+tss, running 16-bit code, paged. /
199	#define BS3_MODE_PP16_32 UINT8_C(0x32) /*< 16-bit protected mode kernel+tss, running 32-bit code, paged. /
200	#define BS3_MODE_PP16_V86 UINT8_C(0x38) /*< 16-bit protected mode kernel+tss, running virtual 8086 mode code, paged. /
201	#define BS3_MODE_PP32 UINT8_C(0x42) /*< 32-bit protected mode kernel+tss, running 32-bit code, paged. /
202	#define BS3_MODE_PP32_16 UINT8_C(0x41) /*< 32-bit protected mode kernel+tss, running 16-bit code, paged. /
203	#define BS3_MODE_PPV86 UINT8_C(0x48) /*< 32-bit protected mode kernel+tss, running virtual 8086 mode code, paged. /
204	#define BS3_MODE_PAE16 UINT8_C(0x51) /*< 16-bit protected mode kernel+tss, running 16-bit code, PAE paging. /
205	#define BS3_MODE_PAE16_32 UINT8_C(0x52) /*< 16-bit protected mode kernel+tss, running 32-bit code, PAE paging. /
206	#define BS3_MODE_PAE16_V86 UINT8_C(0x58) /*< 16-bit protected mode kernel+tss, running virtual 8086 mode, PAE paging. /
207	#define BS3_MODE_PAE32 UINT8_C(0x62) /*< 32-bit protected mode kernel+tss, running 32-bit code, PAE paging. /
208	#define BS3_MODE_PAE32_16 UINT8_C(0x61) /*< 32-bit protected mode kernel+tss, running 16-bit code, PAE paging. /
209	#define BS3_MODE_PAEV86 UINT8_C(0x68) /*< 32-bit protected mode kernel+tss, running virtual 8086 mode, PAE paging. /
210	#define BS3_MODE_LM16 UINT8_C(0x71) /*< 16-bit long mode (paged), kernel+tss always 64-bit. /
211	#define BS3_MODE_LM32 UINT8_C(0x72) /*< 32-bit long mode (paged), kernel+tss always 64-bit. /
212	#define BS3_MODE_LM64 UINT8_C(0x74) /*< 64-bit long mode (paged), kernel+tss always 64-bit. /
213
214	#define BS3_MODE_CODE_MASK UINT8_C(0x0f) /*< Running code mask. /
215	#define BS3_MODE_CODE_16 UINT8_C(0x01) /*< Running 16-bit code. /
216	#define BS3_MODE_CODE_32 UINT8_C(0x02) /*< Running 32-bit code. /
217	#define BS3_MODE_CODE_64 UINT8_C(0x04) /*< Running 64-bit code. /
218	#define BS3_MODE_CODE_V86 UINT8_C(0x08) /*< Running 16-bit virtual 8086 code. /
219
220	#define BS3_MODE_SYS_MASK UINT8_C(0xf0) /*< kernel+tss mask. /
221	#define BS3_MODE_SYS_RM UINT8_C(0x00) /*< Real mode kernel+tss. /
222	#define BS3_MODE_SYS_PE16 UINT8_C(0x10) /*< 16-bit protected mode kernel+tss. /
223	#define BS3_MODE_SYS_PE32 UINT8_C(0x20) /*< 32-bit protected mode kernel+tss. /
224	#define BS3_MODE_SYS_PP16 UINT8_C(0x30) /*< 16-bit paged protected mode kernel+tss. /
225	#define BS3_MODE_SYS_PP32 UINT8_C(0x40) /*< 32-bit paged protected mode kernel+tss. /
226	#define BS3_MODE_SYS_PAE16 UINT8_C(0x50) /*< 16-bit PAE paged protected mode kernel+tss. /
227	#define BS3_MODE_SYS_PAE32 UINT8_C(0x60) /*< 32-bit PAE paged protected mode kernel+tss. /
228	#define BS3_MODE_SYS_LM UINT8_C(0x70) /*< 64-bit (paged) long mode protected mode kernel+tss. /
229
230	/** Whether the mode has paging enabled. */
231	#define BS3_MODE_IS_PAGED(a_fMode) ((a_fMode) >= BS3_MODE_PP16)
232	/** Whether the mode has legacy paging enabled (legacy as opposed to PAE or
233	* long mode). */
234	#define BS3_MODE_IS_LEGACY_PAGING(a_fMode) ((a_fMode) >= BS3_MODE_PP16 && (a_fMode) < BS3_MODE_PAE16)
235
236	/** Whether the mode is running v8086 code. */
237	#define BS3_MODE_IS_V86(a_fMode) (((a_fMode) & BS3_MODE_CODE_MASK) == BS3_MODE_CODE_V86)
238	/** Whether the we're executing in real mode or v8086 mode. */
239	#define BS3_MODE_IS_RM_OR_V86(a_fMode) ((a_fMode) == BS3_MODE_RM \|\| BS3_MODE_IS_V86(a_fMode))
240	/** Whether the mode is running 16-bit code, except v8086. */
241	#define BS3_MODE_IS_16BIT_CODE_NO_V86(a_fMode) (((a_fMode) & BS3_MODE_CODE_MASK) == BS3_MODE_CODE_16)
242	/** Whether the mode is running 16-bit code (includes v8086). */
243	#define BS3_MODE_IS_16BIT_CODE(a_fMode) (BS3_MODE_IS_16BIT_CODE_NO_V86(a_fMode) \|\| BS3_MODE_IS_V86(a_fMode))
244	/** Whether the mode is running 32-bit code. */
245	#define BS3_MODE_IS_32BIT_CODE(a_fMode) (((a_fMode) & BS3_MODE_CODE_MASK) == BS3_MODE_CODE_32)
246	/** Whether the mode is running 64-bit code. */
247	#define BS3_MODE_IS_64BIT_CODE(a_fMode) (((a_fMode) & BS3_MODE_CODE_MASK) == BS3_MODE_CODE_64)
248
249	/** Whether the system is in real mode. */
250	#define BS3_MODE_IS_RM_SYS(a_fMode) (((a_fMode) & BS3_MODE_SYS_MASK) == BS3_MODE_SYS_RM)
251	/** Whether the system is some 16-bit mode that isn't real mode. */
252	#define BS3_MODE_IS_16BIT_SYS_NO_RM(a_fMode) ( ((a_fMode) & BS3_MODE_SYS_MASK) == BS3_MODE_SYS_PE16 \
253	\|\| ((a_fMode) & BS3_MODE_SYS_MASK) == BS3_MODE_SYS_PP16 \
254	\|\| ((a_fMode) & BS3_MODE_SYS_MASK) == BS3_MODE_SYS_PAE16)
255	/** Whether the system is some 16-bit mode (includes real mode). */
256	#define BS3_MODE_IS_16BIT_SYS(a_fMode) (BS3_MODE_IS_16BIT_SYS_NO_RM(a_fMode) \|\| BS3_MODE_IS_RM_SYS(a_fMode))
257	/** Whether the system is some 32-bit mode. */
258	#define BS3_MODE_IS_32BIT_SYS(a_fMode) ( ((a_fMode) & BS3_MODE_SYS_MASK) == BS3_MODE_SYS_PE32 \
259	\|\| ((a_fMode) & BS3_MODE_SYS_MASK) == BS3_MODE_SYS_PP32 \
260	\|\| ((a_fMode) & BS3_MODE_SYS_MASK) == BS3_MODE_SYS_PAE32)
261	/** Whether the system is long mode. */
262	#define BS3_MODE_IS_64BIT_SYS(a_fMode) (((a_fMode) & BS3_MODE_SYS_MASK) == BS3_MODE_SYS_LM)
263
264	/** Whether the system is in protected mode (with or without paging).
265	* @note Long mode is not included. */
266	#define BS3_MODE_IS_PM_SYS(a_fMode) ((a_fMode) >= BS3_MODE_SYS_PE16 && (a_fMode) < BS3_MODE_SYS_LM)
267
268	/** @todo testcase: How would long-mode handle a 16-bit TSS loaded prior to the switch? (mainly stack switching wise) Hopefully, it will tripple fault, right? */
269	/** @} */
270
271
272	/** @name BS3_ADDR_XXX - Static Memory Allocation
273	* @{ */
274	/** The flat load address for the code after the bootsector. */
275	#define BS3_ADDR_LOAD 0x10000
276	/** Where we save the boot registers during init.
277	* Located right before the code. */
278	#define BS3_ADDR_REG_SAVE (BS3_ADDR_LOAD - sizeof(BS3REGCTX) - 8)
279	/** Where the stack starts (initial RSP value).
280	* Located 16 bytes (assumed by boot sector) before the saved registers.
281	* SS.BASE=0. The size is a little short of 32KB */
282	#define BS3_ADDR_STACK (BS3_ADDR_REG_SAVE - 16)
283	/** The ring-0 stack (8KB) for ring transitions. */
284	#define BS3_ADDR_STACK_R0 0x06000
285	/** The ring-1 stack (8KB) for ring transitions. */
286	#define BS3_ADDR_STACK_R1 0x04000
287	/** The ring-2 stack (8KB) for ring transitions. */
288	#define BS3_ADDR_STACK_R2 0x02000
289	/** IST1 ring-0 stack for long mode (4KB), used for double faults elsewhere. */
290	#define BS3_ADDR_STACK_R0_IST1 0x09000
291	/** IST2 ring-0 stack for long mode (3KB), used for spare 0 stack elsewhere. */
292	#define BS3_ADDR_STACK_R0_IST2 0x08000
293	/** IST3 ring-0 stack for long mode (1KB). */
294	#define BS3_ADDR_STACK_R0_IST3 0x07400
295	/** IST4 ring-0 stack for long mode (1KB), used for spare 1 stack elsewhere. */
296	#define BS3_ADDR_STACK_R0_IST4 0x07000
297	/** IST5 ring-0 stack for long mode (1KB). */
298	#define BS3_ADDR_STACK_R0_IST5 0x06c00
299	/** IST6 ring-0 stack for long mode (1KB). */
300	#define BS3_ADDR_STACK_R0_IST6 0x06800
301	/** IST7 ring-0 stack for long mode (1KB). */
302	#define BS3_ADDR_STACK_R0_IST7 0x06400
303
304	/** The base address of the BS3TEXT16 segment (same as BS3_LOAD_ADDR).
305	* @sa BS3_SEL_TEXT16 */
306	#define BS3_ADDR_BS3TEXT16 0x10000
307	/** The base address of the BS3SYSTEM16 segment.
308	* @sa BS3_SEL_SYSTEM16 */
309	#define BS3_ADDR_BS3SYSTEM16 0x20000
310	/** The base address of the BS3DATA16/BS3KIT_GRPNM_DATA16 segment.
311	* @sa BS3_SEL_DATA16 */
312	#define BS3_ADDR_BS3DATA16 0x29000
313	/** @} */
314
315	/** @name BS3_SEL_XXX - GDT selector assignments.
316	*
317	* The real mode segment numbers for BS16TEXT, BS16DATA and BS16SYSTEM are
318	* present in the GDT, this allows the 16-bit C/C++ and assembly code to
319	* continue using the real mode segment values in ring-0 protected mode.
320	*
321	* The three segments have fixed locations:
322	* \| segment \| flat address \| real mode segment \|
323	* \| ----------- \| ------------ \| ----------------- \|
324	* \| BS3TEXT16 \| 0x00010000 \| 1000h \|
325	* \| BS3SYSTEM16 \| 0x00020000 \| 2000h \|
326	* \| BS3DATA16 \| 0x00029000 \| 2900h \|
327	*
328	* This means that we've got a lot of GDT space to play around with.
329	*
330	* @{ */
331	#define BS3_SEL_LDT 0x0010 /*< The LDT selector for Bs3Ldt. /
332	#define BS3_SEL_TSS16 0x0020 /*< The 16-bit TSS selector. /
333	#define BS3_SEL_TSS16_DF 0x0028 /*< The 16-bit TSS selector for double faults. /
334	#define BS3_SEL_TSS16_SPARE0 0x0030 /*< The 16-bit TSS selector for testing. /
335	#define BS3_SEL_TSS16_SPARE1 0x0038 /*< The 16-bit TSS selector for testing. /
336	#define BS3_SEL_TSS32 0x0040 /*< The 32-bit TSS selector. /
337	#define BS3_SEL_TSS32_DF 0x0048 /*< The 32-bit TSS selector for double faults. /
338	#define BS3_SEL_TSS32_SPARE0 0x0050 /*< The 32-bit TSS selector for testing. /
339	#define BS3_SEL_TSS32_SPARE1 0x0058 /*< The 32-bit TSS selector for testing. /
340	#define BS3_SEL_TSS32_IOBP_IRB 0x0060 /*< The 32-bit TSS selector with I/O permission and interrupt redirection bitmaps. /
341	#define BS3_SEL_TSS32_IRB 0x0068 /*< The 32-bit TSS selector with only interrupt redirection bitmap (IOPB stripped by limit). /
342	#define BS3_SEL_TSS64 0x0070 /*< The 64-bit TSS selector. /
343	#define BS3_SEL_TSS64_SPARE0 0x0080 /*< The 64-bit TSS selector. /
344	#define BS3_SEL_TSS64_SPARE1 0x0090 /*< The 64-bit TSS selector. /
345	#define BS3_SEL_TSS64_IOBP 0x00a0 /*< The 64-bit TSS selector. /
346
347	#define BS3_SEL_RMTEXT16_CS 0x00e0 /*< Conforming code selector for accessing the BS3RMTEXT16 segment. Runtime config. /
348	#define BS3_SEL_X0TEXT16_CS 0x00e8 /*< Conforming code selector for accessing the BS3X0TEXT16 segment. Runtime config. /
349	#define BS3_SEL_X1TEXT16_CS 0x00f0 /*< Conforming code selector for accessing the BS3X1TEXT16 segment. Runtime config. /
350	#define BS3_SEL_VMMDEV_MMIO16 0x00f8 /*< Selector for accessing the VMMDev MMIO segment at 0100000h from 16-bit code. /
351
352	/** Checks if @a uSel is in the BS3_SEL_RX_XXX range. */
353	#define BS3_SEL_IS_IN_RING_RANGE(uSel) ( (unsigned)(uSel - BS3_SEL_R0_FIRST) < (unsigned)(4 << BS3_SEL_RING_SHIFT) )
354	#define BS3_SEL_RING_SHIFT 8 /*< For the formula: BS3_SEL_R0_XXX + ((cs & 3) << BS3_SEL_RING_SHIFT) /
355	#define BS3_SEL_RING_SUB_MASK 0x00f8 /*< Mask for getting the sub-selector. For use with BS3_SEL_R_FIRST. */
356
357	/** Checks if @a uSel is in the BS3_SEL_R0_XXX range. */
358	#define BS3_SEL_IS_IN_R0_RANGE(uSel) ( (unsigned)(uSel - BS3_SEL_R0_FIRST) < (unsigned)(1 << BS3_SEL_RING_SHIFT) )
359	#define BS3_SEL_R0_FIRST 0x0100 /*< The first selector in the ring-0 block. /
360	#define BS3_SEL_R0_CS16 0x0100 /*< ring-0: 16-bit code selector, base 0x10000. /
361	#define BS3_SEL_R0_DS16 0x0108 /*< ring-0: 16-bit data selector, base 0x23000. /
362	#define BS3_SEL_R0_SS16 0x0110 /*< ring-0: 16-bit stack selector, base 0x00000. /
363	#define BS3_SEL_R0_CS32 0x0118 /*< ring-0: 32-bit flat code selector. /
364	#define BS3_SEL_R0_DS32 0x0120 /*< ring-0: 32-bit flat data selector. /
365	#define BS3_SEL_R0_SS32 0x0128 /*< ring-0: 32-bit flat stack selector. /
366	#define BS3_SEL_R0_CS64 0x0130 /*< ring-0: 64-bit flat code selector. /
367	#define BS3_SEL_R0_DS64 0x0138 /*< ring-0: 64-bit flat data & stack selector. /
368	#define BS3_SEL_R0_CS16_EO 0x0140 /*< ring-0: 16-bit execute-only code selector, not accessed, 0xfffe limit, CS16 base. /
369	#define BS3_SEL_R0_CS16_CNF 0x0148 /*< ring-0: 16-bit conforming code selector, not accessed, 0xfffe limit, CS16 base. /
370	#define BS3_SEL_R0_CS16_CNF_EO 0x0150 /*< ring-0: 16-bit execute-only conforming code selector, not accessed, 0xfffe limit, CS16 base. /
371	#define BS3_SEL_R0_CS32_EO 0x0158 /*< ring-0: 32-bit execute-only code selector, not accessed, flat. /
372	#define BS3_SEL_R0_CS32_CNF 0x0160 /*< ring-0: 32-bit conforming code selector, not accessed, flat. /
373	#define BS3_SEL_R0_CS32_CNF_EO 0x0168 /*< ring-0: 32-bit execute-only conforming code selector, not accessed, flat. /
374	#define BS3_SEL_R0_CS64_EO 0x0170 /*< ring-0: 64-bit execute-only code selector, not accessed, flat. /
375	#define BS3_SEL_R0_CS64_CNF 0x0178 /*< ring-0: 64-bit conforming code selector, not accessed, flat. /
376	#define BS3_SEL_R0_CS64_CNF_EO 0x0180 /*< ring-0: 64-bit execute-only conforming code selector, not accessed, flat. /
377
378	#define BS3_SEL_R1_FIRST 0x0200 /*< The first selector in the ring-1 block. /
379	#define BS3_SEL_R1_CS16 0x0200 /*< ring-1: 16-bit code selector, base 0x10000. /
380	#define BS3_SEL_R1_DS16 0x0208 /*< ring-1: 16-bit data selector, base 0x23000. /
381	#define BS3_SEL_R1_SS16 0x0210 /*< ring-1: 16-bit stack selector, base 0x00000. /
382	#define BS3_SEL_R1_CS32 0x0218 /*< ring-1: 32-bit flat code selector. /
383	#define BS3_SEL_R1_DS32 0x0220 /*< ring-1: 32-bit flat data selector. /
384	#define BS3_SEL_R1_SS32 0x0228 /*< ring-1: 32-bit flat stack selector. /
385	#define BS3_SEL_R1_CS64 0x0230 /*< ring-1: 64-bit flat code selector. /
386	#define BS3_SEL_R1_DS64 0x0238 /*< ring-1: 64-bit flat data & stack selector. /
387	#define BS3_SEL_R1_CS16_EO 0x0240 /*< ring-1: 16-bit execute-only code selector, not accessed, 0xfffe limit, CS16 base. /
388	#define BS3_SEL_R1_CS16_CNF 0x0248 /*< ring-1: 16-bit conforming code selector, not accessed, 0xfffe limit, CS16 base. /
389	#define BS3_SEL_R1_CS16_CNF_EO 0x0250 /*< ring-1: 16-bit execute-only conforming code selector, not accessed, 0xfffe limit, CS16 base. /
390	#define BS3_SEL_R1_CS32_EO 0x0258 /*< ring-1: 32-bit execute-only code selector, not accessed, flat. /
391	#define BS3_SEL_R1_CS32_CNF 0x0260 /*< ring-1: 32-bit conforming code selector, not accessed, flat. /
392	#define BS3_SEL_R1_CS32_CNF_EO 0x0268 /*< ring-1: 32-bit execute-only conforming code selector, not accessed, flat. /
393	#define BS3_SEL_R1_CS64_EO 0x0270 /*< ring-1: 64-bit execute-only code selector, not accessed, flat. /
394	#define BS3_SEL_R1_CS64_CNF 0x0278 /*< ring-1: 64-bit conforming code selector, not accessed, flat. /
395	#define BS3_SEL_R1_CS64_CNF_EO 0x0280 /*< ring-1: 64-bit execute-only conforming code selector, not accessed, flat. /
396
397	#define BS3_SEL_R2_FIRST 0x0300 /*< The first selector in the ring-2 block. /
398	#define BS3_SEL_R2_CS16 0x0300 /*< ring-2: 16-bit code selector, base 0x10000. /
399	#define BS3_SEL_R2_DS16 0x0308 /*< ring-2: 16-bit data selector, base 0x23000. /
400	#define BS3_SEL_R2_SS16 0x0310 /*< ring-2: 16-bit stack selector, base 0x00000. /
401	#define BS3_SEL_R2_CS32 0x0318 /*< ring-2: 32-bit flat code selector. /
402	#define BS3_SEL_R2_DS32 0x0320 /*< ring-2: 32-bit flat data selector. /
403	#define BS3_SEL_R2_SS32 0x0328 /*< ring-2: 32-bit flat stack selector. /
404	#define BS3_SEL_R2_CS64 0x0330 /*< ring-2: 64-bit flat code selector. /
405	#define BS3_SEL_R2_DS64 0x0338 /*< ring-2: 64-bit flat data & stack selector. /
406	#define BS3_SEL_R2_CS16_EO 0x0340 /*< ring-2: 16-bit execute-only code selector, not accessed, 0xfffe limit, CS16 base. /
407	#define BS3_SEL_R2_CS16_CNF 0x0348 /*< ring-2: 16-bit conforming code selector, not accessed, 0xfffe limit, CS16 base. /
408	#define BS3_SEL_R2_CS16_CNF_EO 0x0350 /*< ring-2: 16-bit execute-only conforming code selector, not accessed, 0xfffe limit, CS16 base. /
409	#define BS3_SEL_R2_CS32_EO 0x0358 /*< ring-2: 32-bit execute-only code selector, not accessed, flat. /
410	#define BS3_SEL_R2_CS32_CNF 0x0360 /*< ring-2: 32-bit conforming code selector, not accessed, flat. /
411	#define BS3_SEL_R2_CS32_CNF_EO 0x0368 /*< ring-2: 32-bit execute-only conforming code selector, not accessed, flat. /
412	#define BS3_SEL_R2_CS64_EO 0x0370 /*< ring-2: 64-bit execute-only code selector, not accessed, flat. /
413	#define BS3_SEL_R2_CS64_CNF 0x0378 /*< ring-2: 64-bit conforming code selector, not accessed, flat. /
414	#define BS3_SEL_R2_CS64_CNF_EO 0x0380 /*< ring-2: 64-bit execute-only conforming code selector, not accessed, flat. /
415
416	#define BS3_SEL_R3_FIRST 0x0400 /*< The first selector in the ring-3 block. /
417	#define BS3_SEL_R3_CS16 0x0400 /*< ring-3: 16-bit code selector, base 0x10000. /
418	#define BS3_SEL_R3_DS16 0x0408 /*< ring-3: 16-bit data selector, base 0x23000. /
419	#define BS3_SEL_R3_SS16 0x0410 /*< ring-3: 16-bit stack selector, base 0x00000. /
420	#define BS3_SEL_R3_CS32 0x0418 /*< ring-3: 32-bit flat code selector. /
421	#define BS3_SEL_R3_DS32 0x0420 /*< ring-3: 32-bit flat data selector. /
422	#define BS3_SEL_R3_SS32 0x0428 /*< ring-3: 32-bit flat stack selector. /
423	#define BS3_SEL_R3_CS64 0x0430 /*< ring-3: 64-bit flat code selector. /
424	#define BS3_SEL_R3_DS64 0x0438 /*< ring-3: 64-bit flat data & stack selector. /
425	#define BS3_SEL_R3_CS16_EO 0x0440 /*< ring-3: 16-bit execute-only code selector, not accessed, 0xfffe limit, CS16 base. /
426	#define BS3_SEL_R3_CS16_CNF 0x0448 /*< ring-3: 16-bit conforming code selector, not accessed, 0xfffe limit, CS16 base. /
427	#define BS3_SEL_R3_CS16_CNF_EO 0x0450 /*< ring-3: 16-bit execute-only conforming code selector, not accessed, 0xfffe limit, CS16 base. /
428	#define BS3_SEL_R3_CS32_EO 0x0458 /*< ring-3: 32-bit execute-only code selector, not accessed, flat. /
429	#define BS3_SEL_R3_CS32_CNF 0x0460 /*< ring-3: 32-bit conforming code selector, not accessed, flat. /
430	#define BS3_SEL_R3_CS32_CNF_EO 0x0468 /*< ring-3: 32-bit execute-only conforming code selector, not accessed, flat. /
431	#define BS3_SEL_R3_CS64_EO 0x0470 /*< ring-3: 64-bit execute-only code selector, not accessed, flat. /
432	#define BS3_SEL_R3_CS64_CNF 0x0478 /*< ring-3: 64-bit conforming code selector, not accessed, flat. /
433	#define BS3_SEL_R3_CS64_CNF_EO 0x0480 /*< ring-3: 64-bit execute-only conforming code selector, not accessed, flat. /
434
435	#define BS3_SEL_R3_LAST 0x04f8 /*< ring-3: Last of the BS3_SEL_RX_XXX range. /
436
437	#define BS3_SEL_SPARE_FIRST 0x0500 /*< The first selector in the spare block /
438	#define BS3_SEL_SPARE_00 0x0500 /*< Spare selector number 00h. /
439	#define BS3_SEL_SPARE_01 0x0508 /*< Spare selector number 01h. /
440	#define BS3_SEL_SPARE_02 0x0510 /*< Spare selector number 02h. /
441	#define BS3_SEL_SPARE_03 0x0518 /*< Spare selector number 03h. /
442	#define BS3_SEL_SPARE_04 0x0520 /*< Spare selector number 04h. /
443	#define BS3_SEL_SPARE_05 0x0528 /*< Spare selector number 05h. /
444	#define BS3_SEL_SPARE_06 0x0530 /*< Spare selector number 06h. /
445	#define BS3_SEL_SPARE_07 0x0538 /*< Spare selector number 07h. /
446	#define BS3_SEL_SPARE_08 0x0540 /*< Spare selector number 08h. /
447	#define BS3_SEL_SPARE_09 0x0548 /*< Spare selector number 09h. /
448	#define BS3_SEL_SPARE_0a 0x0550 /*< Spare selector number 0ah. /
449	#define BS3_SEL_SPARE_0b 0x0558 /*< Spare selector number 0bh. /
450	#define BS3_SEL_SPARE_0c 0x0560 /*< Spare selector number 0ch. /
451	#define BS3_SEL_SPARE_0d 0x0568 /*< Spare selector number 0dh. /
452	#define BS3_SEL_SPARE_0e 0x0570 /*< Spare selector number 0eh. /
453	#define BS3_SEL_SPARE_0f 0x0578 /*< Spare selector number 0fh. /
454	#define BS3_SEL_SPARE_10 0x0580 /*< Spare selector number 10h. /
455	#define BS3_SEL_SPARE_11 0x0588 /*< Spare selector number 11h. /
456	#define BS3_SEL_SPARE_12 0x0590 /*< Spare selector number 12h. /
457	#define BS3_SEL_SPARE_13 0x0598 /*< Spare selector number 13h. /
458	#define BS3_SEL_SPARE_14 0x05a0 /*< Spare selector number 14h. /
459	#define BS3_SEL_SPARE_15 0x05a8 /*< Spare selector number 15h. /
460	#define BS3_SEL_SPARE_16 0x05b0 /*< Spare selector number 16h. /
461	#define BS3_SEL_SPARE_17 0x05b8 /*< Spare selector number 17h. /
462	#define BS3_SEL_SPARE_18 0x05c0 /*< Spare selector number 18h. /
463	#define BS3_SEL_SPARE_19 0x05c8 /*< Spare selector number 19h. /
464	#define BS3_SEL_SPARE_1a 0x05d0 /*< Spare selector number 1ah. /
465	#define BS3_SEL_SPARE_1b 0x05d8 /*< Spare selector number 1bh. /
466	#define BS3_SEL_SPARE_1c 0x05e0 /*< Spare selector number 1ch. /
467	#define BS3_SEL_SPARE_1d 0x05e8 /*< Spare selector number 1dh. /
468	#define BS3_SEL_SPARE_1e 0x05f0 /*< Spare selector number 1eh. /
469	#define BS3_SEL_SPARE_1f 0x05f8 /*< Spare selector number 1fh. /
470
471	#define BS3_SEL_TILED 0x0600 /*< 16-bit data tiling: First - base=0x00000000, limit=64KB, DPL=3. /
472	#define BS3_SEL_TILED_LAST 0x0df8 /*< 16-bit data tiling: Last - base=0x00ff0000, limit=64KB, DPL=3. /
473	#define BS3_SEL_TILED_AREA_SIZE 0x001000000 /*< 16-bit data tiling: Size of addressable area, in bytes. (16 MB) /
474
475	#define BS3_SEL_FREE_PART1 0x0e00 /*< Free selector space - part \#1. /
476	#define BS3_SEL_FREE_PART1_LAST 0x0ff8 /*< Free selector space - part \#1, last entry. /
477
478	#define BS3_SEL_TEXT16 0x1000 /*< The BS3TEXT16 selector. /
479
480	#define BS3_SEL_FREE_PART2 0x1008 /*< Free selector space - part \#2. /
481	#define BS3_SEL_FREE_PART2_LAST 0x17f8 /*< Free selector space - part \#2, last entry. /
482
483	#define BS3_SEL_TILED_R0 0x1800 /*< 16-bit data/stack tiling: First - base=0x00000000, limit=64KB, DPL=0. /
484	#define BS3_SEL_TILED_R0_LAST 0x1ff8 /*< 16-bit data/stack tiling: Last - base=0x00ff0000, limit=64KB, DPL=0. /
485
486	#define BS3_SEL_SYSTEM16 0x2000 /*< The BS3SYSTEM16 selector. /
487
488	#define BS3_SEL_FREE_PART3 0x2008 /*< Free selector space - part \#3. /
489	#define BS3_SEL_FREE_PART3_LAST 0x28f8 /*< Free selector space - part \#3, last entry. /
490
491	#define BS3_SEL_DATA16 0x2900 /*< The BS3DATA16/BS3KIT_GRPNM_DATA16 selector. /
492
493	#define BS3_SEL_FREE_PART4 0x2908 /*< Free selector space - part \#4. /
494	#define BS3_SEL_FREE_PART4_LAST 0x2f98 /*< Free selector space - part \#4, last entry. /
495
496	#define BS3_SEL_PRE_TEST_PAGE_08 0x2fa0 /*< Selector located 8 selectors before the test page. /
497	#define BS3_SEL_PRE_TEST_PAGE_07 0x2fa8 /*< Selector located 7 selectors before the test page. /
498	#define BS3_SEL_PRE_TEST_PAGE_06 0x2fb0 /*< Selector located 6 selectors before the test page. /
499	#define BS3_SEL_PRE_TEST_PAGE_05 0x2fb8 /*< Selector located 5 selectors before the test page. /
500	#define BS3_SEL_PRE_TEST_PAGE_04 0x2fc0 /*< Selector located 4 selectors before the test page. /
501	#define BS3_SEL_PRE_TEST_PAGE_03 0x2fc8 /*< Selector located 3 selectors before the test page. /
502	#define BS3_SEL_PRE_TEST_PAGE_02 0x2fd0 /*< Selector located 2 selectors before the test page. /
503	#define BS3_SEL_PRE_TEST_PAGE_01 0x2fd8 /*< Selector located 1 selector before the test page. /
504	#define BS3_SEL_TEST_PAGE 0x2fe0 /*< Start of the test page intended for playing around with paging and GDT. /
505	#define BS3_SEL_TEST_PAGE_00 0x2fe0 /*< Test page selector number 00h (convenience). /
506	#define BS3_SEL_TEST_PAGE_01 0x2fe8 /*< Test page selector number 01h (convenience). /
507	#define BS3_SEL_TEST_PAGE_02 0x2ff0 /*< Test page selector number 02h (convenience). /
508	#define BS3_SEL_TEST_PAGE_03 0x2ff8 /*< Test page selector number 03h (convenience). /
509	#define BS3_SEL_TEST_PAGE_04 0x3000 /*< Test page selector number 04h (convenience). /
510	#define BS3_SEL_TEST_PAGE_05 0x3008 /*< Test page selector number 05h (convenience). /
511	#define BS3_SEL_TEST_PAGE_06 0x3010 /*< Test page selector number 06h (convenience). /
512	#define BS3_SEL_TEST_PAGE_07 0x3018 /*< Test page selector number 07h (convenience). /
513	#define BS3_SEL_TEST_PAGE_LAST 0x3fd0 /*< The last selector in the spare page. /
514
515	#define BS3_SEL_GDT_LIMIT 0x3fd8 /*< The GDT limit. /
516	/** @} */
517
518
519	/** @def BS3_FAR
520	* For indicating far pointers in 16-bit code.
521	* Does nothing in 32-bit and 64-bit code. */
522	/** @def BS3_NEAR
523	* For indicating near pointers in 16-bit code.
524	* Does nothing in 32-bit and 64-bit code. */
525	/** @def BS3_FAR_CODE
526	* For indicating far 16-bit functions.
527	* Does nothing in 32-bit and 64-bit code. */
528	/** @def BS3_NEAR_CODE
529	* For indicating near 16-bit functions.
530	* Does nothing in 32-bit and 64-bit code. */
531	/** @def BS3_FAR_DATA
532	* For indicating far 16-bit external data, i.e. in a segment other than DATA16.
533	* Does nothing in 32-bit and 64-bit code. */
534	#ifdef M_I86
535	# define BS3_FAR __far
536	# define BS3_NEAR __near
537	# define BS3_FAR_CODE __far
538	# define BS3_NEAR_CODE __near
539	# define BS3_FAR_DATA __far
540	#else
541	# define BS3_FAR
542	# define BS3_NEAR
543	# define BS3_FAR_CODE
544	# define BS3_NEAR_CODE
545	# define BS3_FAR_DATA
546	#endif
547
548	#if ARCH_BITS == 16 \|\| defined(DOXYGEN_RUNNING)
549	/** @def BS3_FP_SEG
550	* Get the selector (segment) part of a far pointer.
551	*
552	* @returns selector.
553	* @param a_pv Far pointer.
554	*/
555	# define BS3_FP_SEG(a_pv) ((uint16_t)(__segment)(void BS3_FAR *)(a_pv))
556	/** @def BS3_FP_OFF
557	* Get the segment offset part of a far pointer.
558	*
559	* For sake of convenience, this works like a uintptr_t cast in 32-bit and
560	* 64-bit code.
561	*
562	* @returns offset.
563	* @param a_pv Far pointer.
564	*/
565	# define BS3_FP_OFF(a_pv) ((uint16_t)(void __near *)(a_pv))
566	/** @def BS3_FP_MAKE
567	* Create a far pointer.
568	*
569	* @returns Far pointer.
570	* @param a_uSeg The selector/segment.
571	* @param a_off The offset into the segment.
572	*/
573	# define BS3_FP_MAKE(a_uSeg, a_off) (((__segment)(a_uSeg)) :> ((void __near *)(a_off)))
574	#else
575	# define BS3_FP_OFF(a_pv) ((uintptr_t)(a_pv))
576	#endif
577
578	/** @def BS3_MAKE_PROT_R0PTR_FROM_FLAT
579	* Creates a protected mode pointer from a flat address.
580	*
581	* For sake of convenience, this macro also works in 32-bit and 64-bit mode,
582	* only there it doesn't return a far pointer but a flat point.
583	*
584	* @returns far void pointer if 16-bit code, near/flat void pointer in 32-bit
585	* and 64-bit.
586	* @param a_uFlat Flat address in the first 16MB. */
587	#if ARCH_BITS == 16
588	# define BS3_MAKE_PROT_R0PTR_FROM_FLAT(a_uFlat) \
589	BS3_FP_MAKE(((uint16_t)(a_uFlat >> 16) << 3) + BS3_SEL_TILED, (uint16_t)(a_uFlat))
590	#else
591	# define BS3_MAKE_PROT_R0PTR_FROM_FLAT(a_uFlat) ((void *)(uintptr_t)(a_uFlat))
592	#endif
593
594	/** @def BS3_MAKE_PROT_R0PTR_FROM_REAL
595	* Creates a protected mode pointer from a far real mode address.
596	*
597	* For sake of convenience, this macro also works in 32-bit and 64-bit mode,
598	* only there it doesn't return a far pointer but a flat point.
599	*
600	* @returns far void pointer if 16-bit code, near/flat void pointer in 32-bit
601	* and 64-bit.
602	* @param a_uSeg The selector/segment.
603	* @param a_off The offset into the segment.
604	*/
605	#if ARCH_BITS == 16
606	# define BS3_MAKE_PROT_R0PTR_FROM_REAL(a_uSeg, a_off) BS3_MAKE_PROT_R0PTR_FROM_FLAT(((uint32_t)(a_uSeg) << 4) + (uint16_t)(a_off))
607	#else
608	# define BS3_MAKE_PROT_R0PTR_FROM_REAL(a_uSeg, a_off) ( (void *)(uintptr_t)(((uint32_t)(a_uSeg) << 4) + (uint16_t)(a_off)) )
609	#endif
610
611
612	/** @def BS3_CALL
613	* The calling convension used by BS3 functions. */
614	#if ARCH_BITS != 64
615	# define BS3_CALL __cdecl
616	#elif !defined(_MSC_VER)
617	# define BS3_CALL __attribute__((__ms_abi__))
618	#else
619	# define BS3_CALL
620	#endif
621
622	/** @def IN_BS3KIT
623	* Indicates that we're in the same link job as the BS3Kit code. */
624	#ifdef DOXYGEN_RUNNING
625	# define IN_BS3KIT
626	#endif
627
628	/** @def BS3_DECL
629	* Declares a BS3Kit function with default far/near.
630	*
631	* Until we outgrow BS3TEXT16, we use all near functions in 16-bit.
632	*
633	* @param a_Type The return type. */
634	#if ARCH_BITS != 16 \|\| !defined(BS3_USE_ALT_16BIT_TEXT_SEG)
635	# define BS3_DECL(a_Type) BS3_DECL_NEAR(a_Type)
636	#else
637	# define BS3_DECL(a_Type) BS3_DECL_FAR(a_Type)
638	#endif
639
640	/** @def BS3_DECL_NEAR
641	* Declares a BS3Kit function, always near everywhere.
642	*
643	* Until we outgrow BS3TEXT16, we use all near functions in 16-bit.
644	*
645	* @param a_Type The return type. */
646	#ifdef IN_BS3KIT
647	# define BS3_DECL_NEAR(a_Type) DECLEXPORT(a_Type) BS3_NEAR_CODE BS3_CALL
648	#else
649	# define BS3_DECL_NEAR(a_Type) DECLIMPORT(a_Type) BS3_NEAR_CODE BS3_CALL
650	#endif
651
652	/** @def BS3_DECL_FAR
653	* Declares a BS3Kit function, far 16-bit, otherwise near.
654	*
655	* Until we outgrow BS3TEXT16, we use all near functions in 16-bit.
656	*
657	* @param a_Type The return type. */
658	#ifdef IN_BS3KIT
659	# define BS3_DECL_FAR(a_Type) DECLEXPORT(a_Type) BS3_FAR_CODE BS3_CALL
660	#else
661	# define BS3_DECL_FAR(a_Type) DECLIMPORT(a_Type) BS3_FAR_CODE BS3_CALL
662	#endif
663
664	/** @def BS3_DECL_CALLBACK
665	* Declares a BS3Kit callback function (typically static).
666	*
667	* @param a_Type The return type. */
668	#ifdef IN_BS3KIT
669	# define BS3_DECL_CALLBACK(a_Type) a_Type BS3_FAR_CODE BS3_CALL
670	#else
671	# define BS3_DECL_CALLBACK(a_Type) a_Type BS3_FAR_CODE BS3_CALL
672	#endif
673
674	/** @def BS3_DECL_NEAR_CALLBACK
675	* Declares a near BS3Kit callback function (typically static).
676	*
677	* 16-bit users must be in CGROUP16!
678	*
679	* @param a_Type The return type. */
680	#ifdef IN_BS3KIT
681	# define BS3_DECL_NEAR_CALLBACK(a_Type) a_Type BS3_NEAR_CODE BS3_CALL
682	#else
683	# define BS3_DECL_NEAR_CALLBACK(a_Type) a_Type BS3_NEAR_CODE BS3_CALL
684	#endif
685
686	/**
687	* Constructs a common name.
688	*
689	* Example: BS3_CMN_NM(Bs3Shutdown)
690	*
691	* @param a_Name The name of the function or global variable.
692	*/
693	#define BS3_CMN_NM(a_Name) RT_CONCAT3(a_Name,_c,ARCH_BITS)
694
695	/**
696	* Constructs a common function name, far in 16-bit code.
697	*
698	* Example: BS3_CMN_FAR_NM(Bs3Shutdown)
699	*
700	* @param a_Name The name of the function.
701	*/
702	#if ARCH_BITS == 16
703	# define BS3_CMN_FAR_NM(a_Name) RT_CONCAT(a_Name,_f16)
704	#else
705	# define BS3_CMN_FAR_NM(a_Name) RT_CONCAT3(a_Name,_c,ARCH_BITS)
706	#endif
707
708	/**
709	* Constructs a common function name, far or near as defined by the source.
710	*
711	* Which to use in 16-bit mode is defined by BS3_USE_ALT_16BIT_TEXT_SEG. In
712	* 32-bit and 64-bit mode there are no far symbols, only near ones.
713	*
714	* Example: BS3_CMN_FN_NM(Bs3Shutdown)
715	*
716	* @param a_Name The name of the function.
717	*/
718	#if ARCH_BITS != 16 \|\| !defined(BS3_USE_ALT_16BIT_TEXT_SEG)
719	# define BS3_CMN_FN_NM(a_Name) BS3_CMN_NM(a_Name)
720	#else
721	# define BS3_CMN_FN_NM(a_Name) BS3_CMN_FAR_NM(a_Name)
722	#endif
723
724
725	/**
726	* Constructs a data name.
727	*
728	* This glosses over the underscore prefix usage of our 16-bit, 32-bit and
729	* 64-bit compilers.
730	*
731	* Example: @code{.c}
732	* \#define Bs3Gdt BS3_DATA_NM(Bs3Gdt)
733	* extern X86DESC BS3_FAR_DATA Bs3Gdt
734	* @endcode
735	*
736	* @param a_Name The name of the global variable.
737	* @remarks Mainly used in bs3kit-mangling.h, internal headers and templates.
738	*/
739	//converter does this now//#if ARCH_BITS == 64
740	//converter does this now//# define BS3_DATA_NM(a_Name) RT_CONCAT(_,a_Name)
741	//converter does this now//#else
742	# define BS3_DATA_NM(a_Name) a_Name
743	//converter does this now//#endif
744
745	/**
746	* Template for creating a pointer union type.
747	* @param a_BaseName The base type name.
748	* @param a_Modifiers The type modifier.
749	*/
750	#define BS3_PTR_UNION_TEMPLATE(a_BaseName, a_Modifiers) \
751	typedef union a_BaseName \
752	{ \
753	/** Pointer into the void. */ \
754	a_Modifiers void BS3_FAR *pv; \
755	/** As a signed integer. */ \
756	intptr_t i; \
757	/** As an unsigned integer. */ \
758	uintptr_t u; \
759	/** Pointer to char value. */ \
760	a_Modifiers char BS3_FAR *pch; \
761	/** Pointer to char value. */ \
762	a_Modifiers unsigned char BS3_FAR *puch; \
763	/** Pointer to a int value. */ \
764	a_Modifiers int BS3_FAR *pi; \
765	/** Pointer to a unsigned int value. */ \
766	a_Modifiers unsigned int BS3_FAR *pu; \
767	/** Pointer to a long value. */ \
768	a_Modifiers long BS3_FAR *pl; \
769	/** Pointer to a long value. */ \
770	a_Modifiers unsigned long BS3_FAR *pul; \
771	/** Pointer to a memory size value. */ \
772	a_Modifiers size_t BS3_FAR *pcb; \
773	/** Pointer to a byte value. */ \
774	a_Modifiers uint8_t BS3_FAR *pb; \
775	/** Pointer to a 8-bit unsigned value. */ \
776	a_Modifiers uint8_t BS3_FAR *pu8; \
777	/** Pointer to a 16-bit unsigned value. */ \
778	a_Modifiers uint16_t BS3_FAR *pu16; \
779	/** Pointer to a 32-bit unsigned value. */ \
780	a_Modifiers uint32_t BS3_FAR *pu32; \
781	/** Pointer to a 64-bit unsigned value. */ \
782	a_Modifiers uint64_t BS3_FAR *pu64; \
783	/** Pointer to a UTF-16 character. */ \
784	a_Modifiers RTUTF16 BS3_FAR *pwc; \
785	/** Pointer to a UUID character. */ \
786	a_Modifiers RTUUID BS3_FAR *pUuid; \
787	} a_BaseName; \
788	/** Pointer to a pointer union. */ \
789	typedef a_BaseName *RT_CONCAT(P,a_BaseName)
790	BS3_PTR_UNION_TEMPLATE(BS3PTRUNION, RT_NOTHING);
791	BS3_PTR_UNION_TEMPLATE(BS3CPTRUNION, const);
792	BS3_PTR_UNION_TEMPLATE(BS3VPTRUNION, volatile);
793	BS3_PTR_UNION_TEMPLATE(BS3CVPTRUNION, const volatile);
794
795	/** Generic far function type. */
796	typedef BS3_DECL_FAR(void) FNBS3FAR(void);
797	/** Generic far function pointer type. */
798	typedef FNBS3FAR *FPFNBS3FAR;
799
800	/** Generic near function type. */
801	typedef BS3_DECL_NEAR(void) FNBS3NEAR(void);
802	/** Generic near function pointer type. */
803	typedef FNBS3NEAR *PFNBS3NEAR;
804
805	/** Generic far 16:16 function pointer type for address conversion functions. */
806	#if ARCH_BITS == 16
807	typedef FPFNBS3FAR PFNBS3FARADDRCONV;
808	#else
809	typedef uint32_t PFNBS3FARADDRCONV;
810	#endif
811
812	/** The system call vector. */
813	#define BS3_TRAP_SYSCALL UINT8_C(0x20)
814
815	/** @name System call numbers (ax).
816	* Paramenters are generally passed in registers specific to each system call,
817	* however cx:xSI is used for passing a pointer parameter.
818	* @{ */
819	/** Print char (cl). */
820	#define BS3_SYSCALL_PRINT_CHR UINT16_C(0x0001)
821	/** Print string (pointer in cx:xSI, length in dx). */
822	#define BS3_SYSCALL_PRINT_STR UINT16_C(0x0002)
823	/** Switch to ring-0. */
824	#define BS3_SYSCALL_TO_RING0 UINT16_C(0x0003)
825	/** Switch to ring-1. */
826	#define BS3_SYSCALL_TO_RING1 UINT16_C(0x0004)
827	/** Switch to ring-2. */
828	#define BS3_SYSCALL_TO_RING2 UINT16_C(0x0005)
829	/** Switch to ring-3. */
830	#define BS3_SYSCALL_TO_RING3 UINT16_C(0x0006)
831	/** Restore context (pointer in cx:xSI, flags in dx). */
832	#define BS3_SYSCALL_RESTORE_CTX UINT16_C(0x0007)
833	/** Set DRx register (value in ESI, register number in dl). */
834	#define BS3_SYSCALL_SET_DRX UINT16_C(0x0008)
835	/** Get DRx register (register number in dl, value returned in ax:dx). */
836	#define BS3_SYSCALL_GET_DRX UINT16_C(0x0009)
837	/** Set CRx register (value in ESI, register number in dl). */
838	#define BS3_SYSCALL_SET_CRX UINT16_C(0x000a)
839	/** Get CRx register (register number in dl, value returned in ax:dx). */
840	#define BS3_SYSCALL_GET_CRX UINT16_C(0x000b)
841	/** Set the task register (value in ESI). */
842	#define BS3_SYSCALL_SET_TR UINT16_C(0x000c)
843	/** Get the task register (value returned in ax). */
844	#define BS3_SYSCALL_GET_TR UINT16_C(0x000d)
845	/** Set the LDT register (value in ESI). */
846	#define BS3_SYSCALL_SET_LDTR UINT16_C(0x000e)
847	/** Get the LDT register (value returned in ax). */
848	#define BS3_SYSCALL_GET_LDTR UINT16_C(0x000f)
849	/** The last system call value. */
850	#define BS3_SYSCALL_LAST BS3_SYSCALL_GET_LDTR
851	/** @} */
852
853
854
855	/** @defgroup grp_bs3kit_system System Structures
856	* @{ */
857	/** The GDT, indexed by BS3_SEL_XXX shifted by 3. */
858	extern X86DESC BS3_FAR_DATA Bs3Gdt[(BS3_SEL_GDT_LIMIT + 1) / 8];
859
860	extern X86DESC64 BS3_FAR_DATA Bs3Gdt_Ldt; /*< @see BS3_SEL_LDT /
861	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss16; /*< @see BS3_SEL_TSS16 /
862	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss16DoubleFault; /*< @see BS3_SEL_TSS16_DF /
863	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss16Spare0; /*< @see BS3_SEL_TSS16_SPARE0 /
864	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss16Spare1; /*< @see BS3_SEL_TSS16_SPARE1 /
865	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss32; /*< @see BS3_SEL_TSS32 /
866	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss32DoubleFault; /*< @see BS3_SEL_TSS32_DF /
867	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss32Spare0; /*< @see BS3_SEL_TSS32_SPARE0 /
868	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss32Spare1; /*< @see BS3_SEL_TSS32_SPARE1 /
869	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss32IobpIntRedirBm; /*< @see BS3_SEL_TSS32_IOBP_IRB /
870	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss32IntRedirBm; /*< @see BS3_SEL_TSS32_IRB /
871	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss64; /*< @see BS3_SEL_TSS64 /
872	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss64Spare0; /*< @see BS3_SEL_TSS64_SPARE0 /
873	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss64Spare1; /*< @see BS3_SEL_TSS64_SPARE1 /
874	extern X86DESC BS3_FAR_DATA Bs3Gdte_Tss64Iobp; /*< @see BS3_SEL_TSS64_IOBP /
875	extern X86DESC BS3_FAR_DATA Bs3Gdte_RMTEXT16_CS; /*< @see BS3_SEL_RMTEXT16_CS /
876	extern X86DESC BS3_FAR_DATA Bs3Gdte_X0TEXT16_CS; /*< @see BS3_SEL_X0TEXT16_CS /
877	extern X86DESC BS3_FAR_DATA Bs3Gdte_X1TEXT16_CS; /*< @see BS3_SEL_X1TEXT16_CS /
878	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_MMIO16; /*< @see BS3_SEL_VMMDEV_MMIO16 /
879
880	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_First; /*< @see BS3_SEL_R0_FIRST /
881	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_CS16; /*< @see BS3_SEL_R0_CS16 /
882	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_DS16; /*< @see BS3_SEL_R0_DS16 /
883	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_SS16; /*< @see BS3_SEL_R0_SS16 /
884	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_CS32; /*< @see BS3_SEL_R0_CS32 /
885	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_DS32; /*< @see BS3_SEL_R0_DS32 /
886	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_SS32; /*< @see BS3_SEL_R0_SS32 /
887	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_CS64; /*< @see BS3_SEL_R0_CS64 /
888	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_DS64; /*< @see BS3_SEL_R0_DS64 /
889	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_CS16_EO; /*< @see BS3_SEL_R0_CS16_EO /
890	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_CS16_CNF; /*< @see BS3_SEL_R0_CS16_CNF /
891	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_CS16_CND_EO; /*< @see BS3_SEL_R0_CS16_CNF_EO /
892	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_CS32_EO; /*< @see BS3_SEL_R0_CS32_EO /
893	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_CS32_CNF; /*< @see BS3_SEL_R0_CS32_CNF /
894	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_CS32_CNF_EO; /*< @see BS3_SEL_R0_CS32_CNF_EO /
895	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_CS64_EO; /*< @see BS3_SEL_R0_CS64_EO /
896	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_CS64_CNF; /*< @see BS3_SEL_R0_CS64_CNF /
897	extern X86DESC BS3_FAR_DATA Bs3Gdte_R0_CS64_CNF_EO; /*< @see BS3_SEL_R0_CS64_CNF_EO /
898
899	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_First; /*< @see BS3_SEL_R1_FIRST /
900	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_CS16; /*< @see BS3_SEL_R1_CS16 /
901	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_DS16; /*< @see BS3_SEL_R1_DS16 /
902	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_SS16; /*< @see BS3_SEL_R1_SS16 /
903	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_CS32; /*< @see BS3_SEL_R1_CS32 /
904	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_DS32; /*< @see BS3_SEL_R1_DS32 /
905	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_SS32; /*< @see BS3_SEL_R1_SS32 /
906	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_CS64; /*< @see BS3_SEL_R1_CS64 /
907	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_DS64; /*< @see BS3_SEL_R1_DS64 /
908	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_CS16_EO; /*< @see BS3_SEL_R1_CS16_EO /
909	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_CS16_CNF; /*< @see BS3_SEL_R1_CS16_CNF /
910	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_CS16_CND_EO; /*< @see BS3_SEL_R1_CS16_CNF_EO /
911	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_CS32_EO; /*< @see BS3_SEL_R1_CS32_EO /
912	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_CS32_CNF; /*< @see BS3_SEL_R1_CS32_CNF /
913	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_CS32_CNF_EO; /*< @see BS3_SEL_R1_CS32_CNF_EO /
914	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_CS64_EO; /*< @see BS3_SEL_R1_CS64_EO /
915	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_CS64_CNF; /*< @see BS3_SEL_R1_CS64_CNF /
916	extern X86DESC BS3_FAR_DATA Bs3Gdte_R1_CS64_CNF_EO; /*< @see BS3_SEL_R1_CS64_CNF_EO /
917
918	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_First; /*< @see BS3_SEL_R2_FIRST /
919	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_CS16; /*< @see BS3_SEL_R2_CS16 /
920	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_DS16; /*< @see BS3_SEL_R2_DS16 /
921	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_SS16; /*< @see BS3_SEL_R2_SS16 /
922	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_CS32; /*< @see BS3_SEL_R2_CS32 /
923	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_DS32; /*< @see BS3_SEL_R2_DS32 /
924	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_SS32; /*< @see BS3_SEL_R2_SS32 /
925	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_CS64; /*< @see BS3_SEL_R2_CS64 /
926	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_DS64; /*< @see BS3_SEL_R2_DS64 /
927	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_CS16_EO; /*< @see BS3_SEL_R2_CS16_EO /
928	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_CS16_CNF; /*< @see BS3_SEL_R2_CS16_CNF /
929	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_CS16_CND_EO; /*< @see BS3_SEL_R2_CS16_CNF_EO /
930	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_CS32_EO; /*< @see BS3_SEL_R2_CS32_EO /
931	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_CS32_CNF; /*< @see BS3_SEL_R2_CS32_CNF /
932	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_CS32_CNF_EO; /*< @see BS3_SEL_R2_CS32_CNF_EO /
933	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_CS64_EO; /*< @see BS3_SEL_R2_CS64_EO /
934	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_CS64_CNF; /*< @see BS3_SEL_R2_CS64_CNF /
935	extern X86DESC BS3_FAR_DATA Bs3Gdte_R2_CS64_CNF_EO; /*< @see BS3_SEL_R2_CS64_CNF_EO /
936
937	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_First; /*< @see BS3_SEL_R3_FIRST /
938	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_CS16; /*< @see BS3_SEL_R3_CS16 /
939	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_DS16; /*< @see BS3_SEL_R3_DS16 /
940	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_SS16; /*< @see BS3_SEL_R3_SS16 /
941	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_CS32; /*< @see BS3_SEL_R3_CS32 /
942	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_DS32; /*< @see BS3_SEL_R3_DS32 /
943	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_SS32; /*< @see BS3_SEL_R3_SS32 /
944	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_CS64; /*< @see BS3_SEL_R3_CS64 /
945	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_DS64; /*< @see BS3_SEL_R3_DS64 /
946	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_CS16_EO; /*< @see BS3_SEL_R3_CS16_EO /
947	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_CS16_CNF; /*< @see BS3_SEL_R3_CS16_CNF /
948	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_CS16_CND_EO; /*< @see BS3_SEL_R3_CS16_CNF_EO /
949	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_CS32_EO; /*< @see BS3_SEL_R3_CS32_EO /
950	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_CS32_CNF; /*< @see BS3_SEL_R3_CS32_CNF /
951	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_CS32_CNF_EO; /*< @see BS3_SEL_R3_CS32_CNF_EO /
952	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_CS64_EO; /*< @see BS3_SEL_R3_CS64_EO /
953	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_CS64_CNF; /*< @see BS3_SEL_R3_CS64_CNF /
954	extern X86DESC BS3_FAR_DATA Bs3Gdte_R3_CS64_CNF_EO; /*< @see BS3_SEL_R3_CS64_CNF_EO /
955
956	extern X86DESC BS3_FAR_DATA Bs3GdteSpare00; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_00 /
957	extern X86DESC BS3_FAR_DATA Bs3GdteSpare01; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_01 /
958	extern X86DESC BS3_FAR_DATA Bs3GdteSpare02; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_02 /
959	extern X86DESC BS3_FAR_DATA Bs3GdteSpare03; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_03 /
960	extern X86DESC BS3_FAR_DATA Bs3GdteSpare04; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_04 /
961	extern X86DESC BS3_FAR_DATA Bs3GdteSpare05; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_05 /
962	extern X86DESC BS3_FAR_DATA Bs3GdteSpare06; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_06 /
963	extern X86DESC BS3_FAR_DATA Bs3GdteSpare07; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_07 /
964	extern X86DESC BS3_FAR_DATA Bs3GdteSpare08; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_08 /
965	extern X86DESC BS3_FAR_DATA Bs3GdteSpare09; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_09 /
966	extern X86DESC BS3_FAR_DATA Bs3GdteSpare0a; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_0a /
967	extern X86DESC BS3_FAR_DATA Bs3GdteSpare0b; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_0b /
968	extern X86DESC BS3_FAR_DATA Bs3GdteSpare0c; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_0c /
969	extern X86DESC BS3_FAR_DATA Bs3GdteSpare0d; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_0d /
970	extern X86DESC BS3_FAR_DATA Bs3GdteSpare0e; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_0e /
971	extern X86DESC BS3_FAR_DATA Bs3GdteSpare0f; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_0f /
972	extern X86DESC BS3_FAR_DATA Bs3GdteSpare10; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_10 /
973	extern X86DESC BS3_FAR_DATA Bs3GdteSpare11; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_11 /
974	extern X86DESC BS3_FAR_DATA Bs3GdteSpare12; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_12 /
975	extern X86DESC BS3_FAR_DATA Bs3GdteSpare13; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_13 /
976	extern X86DESC BS3_FAR_DATA Bs3GdteSpare14; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_14 /
977	extern X86DESC BS3_FAR_DATA Bs3GdteSpare15; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_15 /
978	extern X86DESC BS3_FAR_DATA Bs3GdteSpare16; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_16 /
979	extern X86DESC BS3_FAR_DATA Bs3GdteSpare17; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_17 /
980	extern X86DESC BS3_FAR_DATA Bs3GdteSpare18; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_18 /
981	extern X86DESC BS3_FAR_DATA Bs3GdteSpare19; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_19 /
982	extern X86DESC BS3_FAR_DATA Bs3GdteSpare1a; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_1a /
983	extern X86DESC BS3_FAR_DATA Bs3GdteSpare1b; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_1b /
984	extern X86DESC BS3_FAR_DATA Bs3GdteSpare1c; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_1c /
985	extern X86DESC BS3_FAR_DATA Bs3GdteSpare1d; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_1d /
986	extern X86DESC BS3_FAR_DATA Bs3GdteSpare1e; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_1e /
987	extern X86DESC BS3_FAR_DATA Bs3GdteSpare1f; /*< GDT entry for playing with in testcases. @see BS3_SEL_SPARE_1f /
988
989	/** GDTs setting up the tiled 16-bit access to the first 16 MBs of memory.
990	* @see BS3_SEL_TILED, BS3_SEL_TILED_LAST, BS3_SEL_TILED_AREA_SIZE */
991	extern X86DESC BS3_FAR_DATA Bs3GdteTiled[256];
992	/** Free GDTes, part \#1. */
993	extern X86DESC BS3_FAR_DATA Bs3GdteFreePart1[64];
994	/** The BS3TEXT16/BS3CLASS16CODE GDT entry. @see BS3_SEL_TEXT16 */
995	extern X86DESC BS3_FAR_DATA Bs3Gdte_CODE16;
996	/** Free GDTes, part \#2. */
997	extern X86DESC BS3_FAR_DATA Bs3GdteFreePart2[511];
998	/** The BS3SYSTEM16 GDT entry. */
999	extern X86DESC BS3_FAR_DATA Bs3Gdte_SYSTEM16;
1000	/** Free GDTes, part \#3. */
1001	extern X86DESC BS3_FAR_DATA Bs3GdteFreePart3[223];
1002	/** The BS3DATA16/BS3KIT_GRPNM_DATA16 GDT entry. */
1003	extern X86DESC BS3_FAR_DATA Bs3Gdte_DATA16;
1004
1005	/** Free GDTes, part \#4. */
1006	extern X86DESC BS3_FAR_DATA Bs3GdteFreePart4[211];
1007
1008	extern X86DESC BS3_FAR_DATA Bs3GdtePreTestPage08; /*< GDT entry 8 selectors prior to the test page, testcase resource. @see BS3_SEL_PRE_TEST_PAGE_08 /
1009	extern X86DESC BS3_FAR_DATA Bs3GdtePreTestPage07; /*< GDT entry 7 selectors prior to the test page, testcase resource. @see BS3_SEL_PRE_TEST_PAGE_07 /
1010	extern X86DESC BS3_FAR_DATA Bs3GdtePreTestPage06; /*< GDT entry 6 selectors prior to the test page, testcase resource. @see BS3_SEL_PRE_TEST_PAGE_06 /
1011	extern X86DESC BS3_FAR_DATA Bs3GdtePreTestPage05; /*< GDT entry 5 selectors prior to the test page, testcase resource. @see BS3_SEL_PRE_TEST_PAGE_05 /
1012	extern X86DESC BS3_FAR_DATA Bs3GdtePreTestPage04; /*< GDT entry 4 selectors prior to the test page, testcase resource. @see BS3_SEL_PRE_TEST_PAGE_04 /
1013	extern X86DESC BS3_FAR_DATA Bs3GdtePreTestPage03; /*< GDT entry 3 selectors prior to the test page, testcase resource. @see BS3_SEL_PRE_TEST_PAGE_03 /
1014	extern X86DESC BS3_FAR_DATA Bs3GdtePreTestPage02; /*< GDT entry 2 selectors prior to the test page, testcase resource. @see BS3_SEL_PRE_TEST_PAGE_02 /
1015	extern X86DESC BS3_FAR_DATA Bs3GdtePreTestPage01; /*< GDT entry 1 selectors prior to the test page, testcase resource. @see BS3_SEL_PRE_TEST_PAGE_01 /
1016	/** Array of GDT entries starting on a page boundrary and filling (almost) the
1017	* whole page. This is for playing with paging and GDT usage.
1018	* @see BS3_SEL_TEST_PAGE */
1019	extern X86DESC BS3_FAR_DATA Bs3GdteTestPage[2043];
1020	extern X86DESC BS3_FAR_DATA Bs3GdteTestPage00; /*< GDT entry 0 on the test page (convenience). @see BS3_SEL_TEST_PAGE_00 /
1021	extern X86DESC BS3_FAR_DATA Bs3GdteTestPage01; /*< GDT entry 1 on the test page (convenience). @see BS3_SEL_TEST_PAGE_01 /
1022	extern X86DESC BS3_FAR_DATA Bs3GdteTestPage02; /*< GDT entry 2 on the test page (convenience). @see BS3_SEL_TEST_PAGE_02 /
1023	extern X86DESC BS3_FAR_DATA Bs3GdteTestPage03; /*< GDT entry 3 on the test page (convenience). @see BS3_SEL_TEST_PAGE_03 /
1024	extern X86DESC BS3_FAR_DATA Bs3GdteTestPage04; /*< GDT entry 4 on the test page (convenience). @see BS3_SEL_TEST_PAGE_04 /
1025	extern X86DESC BS3_FAR_DATA Bs3GdteTestPage05; /*< GDT entry 5 on the test page (convenience). @see BS3_SEL_TEST_PAGE_05 /
1026	extern X86DESC BS3_FAR_DATA Bs3GdteTestPage06; /*< GDT entry 6 on the test page (convenience). @see BS3_SEL_TEST_PAGE_06 /
1027	extern X86DESC BS3_FAR_DATA Bs3GdteTestPage07; /*< GDT entry 7 on the test page (convenience). @see BS3_SEL_TEST_PAGE_07 /
1028
1029	/** The end of the GDT (exclusive - contains eye-catcher string). */
1030	extern X86DESC BS3_FAR_DATA Bs3GdtEnd;
1031
1032	/** The default 16-bit TSS. */
1033	extern X86TSS16 BS3_FAR_DATA Bs3Tss16;
1034	extern X86TSS16 BS3_FAR_DATA Bs3Tss16DoubleFault;
1035	extern X86TSS16 BS3_FAR_DATA Bs3Tss16Spare0;
1036	extern X86TSS16 BS3_FAR_DATA Bs3Tss16Spare1;
1037	/** The default 32-bit TSS. */
1038	extern X86TSS32 BS3_FAR_DATA Bs3Tss32;
1039	extern X86TSS32 BS3_FAR_DATA Bs3Tss32DoubleFault;
1040	extern X86TSS32 BS3_FAR_DATA Bs3Tss32Spare0;
1041	extern X86TSS32 BS3_FAR_DATA Bs3Tss32Spare1;
1042	/** The default 64-bit TSS. */
1043	extern X86TSS64 BS3_FAR_DATA Bs3Tss64;
1044	extern X86TSS64 BS3_FAR_DATA Bs3Tss64Spare0;
1045	extern X86TSS64 BS3_FAR_DATA Bs3Tss64Spare1;
1046	extern X86TSS64 BS3_FAR_DATA Bs3Tss64WithIopb;
1047	extern X86TSS32 BS3_FAR_DATA Bs3Tss32WithIopb;
1048	/** Interrupt redirection bitmap used by Bs3Tss32WithIopb. */
1049	extern uint8_t BS3_FAR_DATA Bs3SharedIntRedirBm[32];
1050	/** I/O permission bitmap used by Bs3Tss32WithIopb and Bs3Tss64WithIopb. */
1051	extern uint8_t BS3_FAR_DATA Bs3SharedIobp[8192+2];
1052	/** End of the I/O permission bitmap (exclusive). */
1053	extern uint8_t BS3_FAR_DATA Bs3SharedIobpEnd;
1054	/** 16-bit IDT. */
1055	extern X86DESC BS3_FAR_DATA Bs3Idt16[256];
1056	/** 32-bit IDT. */
1057	extern X86DESC BS3_FAR_DATA Bs3Idt32[256];
1058	/** 64-bit IDT. */
1059	extern X86DESC64 BS3_FAR_DATA Bs3Idt64[256];
1060	/** Structure for the LIDT instruction for loading the 16-bit IDT. */
1061	extern X86XDTR64 BS3_FAR_DATA Bs3Lidt_Idt16;
1062	/** Structure for the LIDT instruction for loading the 32-bit IDT. */
1063	extern X86XDTR64 BS3_FAR_DATA Bs3Lidt_Idt32;
1064	/** Structure for the LIDT instruction for loading the 64-bit IDT. */
1065	extern X86XDTR64 BS3_FAR_DATA Bs3Lidt_Idt64;
1066	/** Structure for the LIDT instruction for loading the real mode interrupt
1067	* vector table. */
1068	extern X86XDTR64 BS3_FAR_DATA Bs3Lidt_Ivt;
1069	/** Structure for the LGDT instruction for loading the current GDT. */
1070	extern X86XDTR64 BS3_FAR_DATA Bs3Lgdt_Gdt;
1071	/** Structure for the LGDT instruction for loading the default GDT. */
1072	extern X86XDTR64 BS3_FAR_DATA Bs3LgdtDef_Gdt;
1073	/** The LDT (all entries are empty, fill in for testing). */
1074	extern X86DESC BS3_FAR_DATA Bs3Ldt[116];
1075	/** The end of the LDT (exclusive). */
1076	extern X86DESC BS3_FAR_DATA Bs3LdtEnd;
1077
1078	/** @} */
1079
1080
1081	/** @name Segment start and end markers, sizes.
1082	* @{ */
1083	/** Start of the BS3TEXT16 segment. */
1084	extern uint8_t BS3_FAR_DATA Bs3Text16_StartOfSegment;
1085	/** End of the BS3TEXT16 segment. */
1086	extern uint8_t BS3_FAR_DATA Bs3Text16_EndOfSegment;
1087	/** The size of the BS3TEXT16 segment. */
1088	extern uint16_t BS3_FAR_DATA Bs3Text16_Size;
1089
1090	/** Start of the BS3SYSTEM16 segment. */
1091	extern uint8_t BS3_FAR_DATA Bs3System16_StartOfSegment;
1092	/** End of the BS3SYSTEM16 segment. */
1093	extern uint8_t BS3_FAR_DATA Bs3System16_EndOfSegment;
1094
1095	/** Start of the BS3DATA16/BS3KIT_GRPNM_DATA16 segment. */
1096	extern uint8_t BS3_FAR_DATA Bs3Data16_StartOfSegment;
1097	/** End of the BS3DATA16/BS3KIT_GRPNM_DATA16 segment. */
1098	extern uint8_t BS3_FAR_DATA Bs3Data16_EndOfSegment;
1099
1100	/** Start of the BS3RMTEXT16 segment. */
1101	extern uint8_t BS3_FAR_DATA Bs3RmText16_StartOfSegment;
1102	/** End of the BS3RMTEXT16 segment. */
1103	extern uint8_t BS3_FAR_DATA Bs3RmText16_EndOfSegment;
1104	/** The size of the BS3RMTEXT16 segment. */
1105	extern uint16_t BS3_FAR_DATA Bs3RmText16_Size;
1106	/** The flat start address of the BS3X0TEXT16 segment. */
1107	extern uint32_t BS3_FAR_DATA Bs3RmText16_FlatAddr;
1108
1109	/** Start of the BS3X0TEXT16 segment. */
1110	extern uint8_t BS3_FAR_DATA Bs3X0Text16_StartOfSegment;
1111	/** End of the BS3X0TEXT16 segment. */
1112	extern uint8_t BS3_FAR_DATA Bs3X0Text16_EndOfSegment;
1113	/** The size of the BS3X0TEXT16 segment. */
1114	extern uint16_t BS3_FAR_DATA Bs3X0Text16_Size;
1115	/** The flat start address of the BS3X0TEXT16 segment. */
1116	extern uint32_t BS3_FAR_DATA Bs3X0Text16_FlatAddr;
1117
1118	/** Start of the BS3X1TEXT16 segment. */
1119	extern uint8_t BS3_FAR_DATA Bs3X1Text16_StartOfSegment;
1120	/** End of the BS3X1TEXT16 segment. */
1121	extern uint8_t BS3_FAR_DATA Bs3X1Text16_EndOfSegment;
1122	/** The size of the BS3X1TEXT16 segment. */
1123	extern uint16_t BS3_FAR_DATA Bs3X1Text16_Size;
1124	/** The flat start address of the BS3X1TEXT16 segment. */
1125	extern uint32_t BS3_FAR_DATA Bs3X1Text16_FlatAddr;
1126
1127	/** Start of the BS3TEXT32 segment. */
1128	extern uint8_t BS3_FAR_DATA Bs3Text32_StartOfSegment;
1129	/** Start of the BS3TEXT32 segment. */
1130	extern uint8_t BS3_FAR_DATA Bs3Text32_EndOfSegment;
1131
1132	/** Start of the BS3DATA32 segment. */
1133	extern uint8_t BS3_FAR_DATA Bs3Data32_StartOfSegment;
1134	/** Start of the BS3DATA32 segment. */
1135	extern uint8_t BS3_FAR_DATA Bs3Data32_EndOfSegment;
1136
1137	/** Start of the BS3TEXT64 segment. */
1138	extern uint8_t BS3_FAR_DATA Bs3Text64_StartOfSegment;
1139	/** Start of the BS3TEXT64 segment. */
1140	extern uint8_t BS3_FAR_DATA Bs3Text64_EndOfSegment;
1141
1142	/** Start of the BS3DATA64 segment. */
1143	extern uint8_t BS3_FAR_DATA Bs3Data64_StartOfSegment;
1144	/** Start of the BS3DATA64 segment. */
1145	extern uint8_t BS3_FAR_DATA Bs3Data64_EndOfSegment;
1146
1147	/** The size of the Data16, Text32, Text64, Data32 and Data64 blob. */
1148	extern uint32_t BS3_FAR_DATA Bs3Data16Thru64Text32And64_TotalSize;
1149	/** The total image size (from Text16 thu Data64). */
1150	extern uint32_t BS3_FAR_DATA Bs3TotalImageSize;
1151	/** @} */
1152
1153
1154	/** Lower case hex digits. */
1155	extern char const g_achBs3HexDigits[16+1];
1156	/** Upper case hex digits. */
1157	extern char const g_achBs3HexDigitsUpper[16+1];
1158
1159
1160	/** The current mode (BS3_MODE_XXX) of CPU \#0. */
1161	extern uint8_t g_bBs3CurrentMode;
1162
1163	/** Hint for 16-bit trap handlers regarding the high word of EIP. */
1164	extern uint32_t g_uBs3TrapEipHint;
1165
1166	/** Set to disable special V8086 \#GP and \#UD handling in Bs3TrapDefaultHandler.
1167	* This is useful for getting */
1168	extern bool volatile g_fBs3TrapNoV86Assist;
1169
1170	/** Copy of the original real-mode interrupt vector table. */
1171	extern RTFAR16 g_aBs3RmIvtOriginal[256];
1172
1173
1174	#ifdef __WATCOMC__
1175	/**
1176	* Executes the SMSW instruction and returns the value.
1177	*
1178	* @returns Machine status word.
1179	*/
1180	uint16_t Bs3AsmSmsw(void);
1181	# pragma aux Bs3AsmSmsw = \
1182	".286" \
1183	"smsw ax" \
1184	value [ax] modify exact [ax] nomemory;
1185	#endif
1186
1187
1188	/** @defgroup bs3kit_cross_ptr Cross Context Pointer Type
1189	*
1190	* The cross context pointer type is
1191	*
1192	* @{ */
1193
1194	/**
1195	* Cross context pointer base type.
1196	*/
1197	typedef union BS3XPTR
1198	{
1199	/** The flat pointer. */
1200	uint32_t uFlat;
1201	/** 16-bit view. */
1202	struct
1203	{
1204	uint16_t uLow;
1205	uint16_t uHigh;
1206	} u;
1207	#if ARCH_BITS == 16
1208	/** 16-bit near pointer. */
1209	void __near *pvNear;
1210	#elif ARCH_BITS == 32
1211	/** 32-bit pointer. */
1212	void *pvRaw;
1213	#endif
1214	} BS3XPTR;
1215	AssertCompileSize(BS3XPTR, 4);
1216
1217
1218	/** @def BS3_XPTR_DEF_INTERNAL
1219	* Internal worker.
1220	*
1221	* @param a_Scope RT_NOTHING if structure or global, static or extern
1222	* otherwise.
1223	* @param a_Type The type we're pointing to.
1224	* @param a_Name The member or variable name.
1225	* @internal
1226	*/
1227	#if ARCH_BITS == 16
1228	# define BS3_XPTR_DEF_INTERNAL(a_Scope, a_Type, a_Name) \
1229	a_Scope union \
1230	{ \
1231	BS3XPTR XPtr; \
1232	a_Type __near *pNearTyped; \
1233	} a_Name
1234	#elif ARCH_BITS == 32
1235	# define BS3_XPTR_DEF_INTERNAL(a_Scope, a_Type, a_Name) \
1236	a_Scope union \
1237	{ \
1238	BS3XPTR XPtr; \
1239	a_Type *pTyped; \
1240	} a_Name
1241	#elif ARCH_BITS == 64
1242	# define BS3_XPTR_DEF_INTERNAL(a_Scope, a_Type, a_Name) \
1243	a_Scope union \
1244	{ \
1245	BS3XPTR XPtr; \
1246	} a_Name
1247	#else
1248	# error "ARCH_BITS"
1249	#endif
1250
1251	/** @def BS3_XPTR_MEMBER
1252	* Defines a pointer member that can be shared by all CPU modes.
1253	*
1254	* @param a_Type The type we're pointing to.
1255	* @param a_Name The member or variable name.
1256	*/
1257	#define BS3_XPTR_MEMBER(a_Type, a_Name) BS3_XPTR_DEF_INTERNAL(RT_NOTHING, a_Type, a_Name)
1258
1259	/** @def BS3_XPTR_AUTO
1260	* Defines a pointer static variable for working with an XPTR.
1261	*
1262	* This is typically used to convert flat pointers into context specific
1263	* pointers.
1264	*
1265	* @param a_Type The type we're pointing to.
1266	* @param a_Name The member or variable name.
1267	*/
1268	#define BS3_XPTR_AUTO(a_Type, a_Name) BS3_XPTR_DEF_INTERNAL(RT_NOTHING, a_Type, a_Name)
1269
1270	/** @def BS3_XPTR_SET_FLAT
1271	* Sets a cross context pointer.
1272	*
1273	* @param a_Type The type we're pointing to.
1274	* @param a_Name The member or variable name.
1275	* @param a_uFlatPtr The flat pointer value to assign. If the x-pointer is
1276	* used in real mode, this must be less than 1MB.
1277	* Otherwise the limit is 16MB (due to selector tiling).
1278	*/
1279	#define BS3_XPTR_SET_FLAT(a_Type, a_Name, a_uFlatPtr) \
1280	do { a_Name.XPtr.uFlat = (a_uFlatPtr); } while (0)
1281
1282	/** @def BS3_XPTR_GET_FLAT
1283	* Gets the flat address of a cross context pointer.
1284	*
1285	* @returns 32-bit flat pointer.
1286	* @param a_Type The type we're pointing to.
1287	* @param a_Name The member or variable name.
1288	*/
1289	#define BS3_XPTR_GET_FLAT(a_Type, a_Name) (a_Name.XPtr.uFlat)
1290
1291	/** @def BS3_XPTR_GET_FLAT_LOW
1292	* Gets the low 16 bits of the flat address.
1293	*
1294	* @returns Low 16 bits of the flat pointer.
1295	* @param a_Type The type we're pointing to.
1296	* @param a_Name The member or variable name.
1297	*/
1298	#define BS3_XPTR_GET_FLAT_LOW(a_Type, a_Name) (a_Name.XPtr.u.uLow)
1299
1300
1301	#if ARCH_BITS == 16
1302
1303	/**
1304	* Gets the current ring number.
1305	* @returns Ring number.
1306	*/
1307	DECLINLINE(uint16_t) Bs3Sel16GetCurRing(void);
1308	# pragma aux Bs3Sel16GetCurRing = \
1309	"mov ax, ss" \
1310	"and ax, 3" \
1311	value [ax] modify exact [ax] nomemory;
1312
1313	/**
1314	* Converts the high word of a flat pointer into a 16-bit selector.
1315	*
1316	* This makes use of the tiled area. It also handles real mode.
1317	*
1318	* @returns Segment selector value.
1319	* @param uHigh The high part of flat pointer.
1320	* @sa BS3_XPTR_GET, BS3_XPTR_SET
1321	*/
1322	DECLINLINE(__segment) Bs3Sel16HighFlatPtrToSelector(uint16_t uHigh)
1323	{
1324	if (!BS3_MODE_IS_RM_OR_V86(g_bBs3CurrentMode))
1325	return (__segment)(((uHigh << 3) + BS3_SEL_TILED) \| Bs3Sel16GetCurRing());
1326	return (__segment)(uHigh << 12);
1327	}
1328
1329	#endif /* ARCH_BITS == 16 */
1330
1331	/** @def BS3_XPTR_GET
1332	* Gets the current context pointer value.
1333	*
1334	* @returns Usable pointer.
1335	* @param a_Type The type we're pointing to.
1336	* @param a_Name The member or variable name.
1337	*/
1338	#if ARCH_BITS == 16
1339	# define BS3_XPTR_GET(a_Type, a_Name) \
1340	((a_Type BS3_FAR *)BS3_FP_MAKE(Bs3Sel16HighFlatPtrToSelector((a_Name).XPtr.u.uHigh), (a_Name).pNearTyped))
1341	#elif ARCH_BITS == 32
1342	# define BS3_XPTR_GET(a_Type, a_Name) ((a_Name).pTyped)
1343	#elif ARCH_BITS == 64
1344	# define BS3_XPTR_GET(a_Type, a_Name) ((a_Type *)(uintptr_t)(a_Name).XPtr.uFlat)
1345	#else
1346	# error "ARCH_BITS"
1347	#endif
1348
1349	/** @def BS3_XPTR_SET
1350	* Gets the current context pointer value.
1351	*
1352	* @returns Usable pointer.
1353	* @param a_Type The type we're pointing to.
1354	* @param a_Name The member or variable name.
1355	* @param a_pValue The new pointer value, current context pointer.
1356	*/
1357	#if ARCH_BITS == 16
1358	# define BS3_XPTR_SET(a_Type, a_Name, a_pValue) \
1359	do { \
1360	a_Type BS3_FAR *pTypeCheck = (a_pValue); \
1361	if (BS3_MODE_IS_RM_OR_V86(g_bBs3CurrentMode)) \
1362	(a_Name).XPtr.uFlat = BS3_FP_OFF(pTypeCheck) + ((uint32_t)BS3_FP_SEG(pTypeCheck) << 4); \
1363	else \
1364	{ \
1365	(a_Name).XPtr.u.uLow = BS3_FP_OFF(pTypeCheck); \
1366	(a_Name).XPtr.u.uHigh = ((BS3_FP_SEG(pTypeCheck) & UINT16_C(0xfff8)) - BS3_SEL_TILED) >> 3; \
1367	} \
1368	} while (0)
1369	#elif ARCH_BITS == 32
1370	# define BS3_XPTR_SET(a_Type, a_Name, a_pValue) \
1371	do { (a_Name).pTyped = (a_pValue); } while (0)
1372	#elif ARCH_BITS == 64
1373	# define BS3_XPTR_SET(a_Type, a_Name, a_pValue) \
1374	do { \
1375	a_Type *pTypeCheck = (a_pValue); \
1376	(a_Name).XPtr.uFlat = (uint32_t)(uintptr_t)pTypeCheck; \
1377	} while (0)
1378	#else
1379	# error "ARCH_BITS"
1380	#endif
1381
1382
1383	/** @def BS3_XPTR_IS_NULL
1384	* Checks if the cross context pointer is NULL.
1385	*
1386	* @returns true if NULL, false if not.
1387	* @param a_Type The type we're pointing to.
1388	* @param a_Name The member or variable name.
1389	*/
1390	#define BS3_XPTR_IS_NULL(a_Type, a_Name) ((a_Name).XPtr.uFlat == 0)
1391
1392	/**
1393	* Gets a working pointer from a flat address.
1394	*
1395	* @returns Current context pointer.
1396	* @param uFlatPtr The flat address to convert (32-bit or 64-bit).
1397	*/
1398	DECLINLINE(void BS3_FAR *) Bs3XptrFlatToCurrent(RTCCUINTXREG uFlatPtr)
1399	{
1400	BS3_XPTR_AUTO(void, pTmp);
1401	BS3_XPTR_SET_FLAT(void, pTmp, uFlatPtr);
1402	return BS3_XPTR_GET(void, pTmp);
1403	}
1404
1405	/** @} */
1406
1407
1408
1409	/** @defgroup grp_bs3kit_cmn Common Functions and Data
1410	*
1411	* The common functions comes in three variations: 16-bit, 32-bit and 64-bit.
1412	* Templated code uses the #BS3_CMN_NM macro to mangle the name according to the
1413	* desired
1414	*
1415	* @{
1416	*/
1417
1418	/** @def BS3_CMN_PROTO_INT
1419	* Internal macro for prototyping all the variations of a common function.
1420	* @param a_RetType The return type.
1421	* @param a_Name The function basename.
1422	* @param a_Params The parameter list (in parentheses).
1423	* @sa BS3_CMN_PROTO_STUB, BS3_CMN_PROTO_NOSB
1424	*/
1425	#if ARCH_BITS == 16
1426	# ifndef BS3_USE_ALT_16BIT_TEXT_SEG
1427	# define BS3_CMN_PROTO_INT(a_RetType, a_Name, a_Params) \
1428	BS3_DECL_NEAR(a_RetType) BS3_CMN_NM(a_Name) a_Params; \
1429	BS3_DECL_FAR(a_RetType) BS3_CMN_FAR_NM(a_Name) a_Params
1430	# else
1431	# define BS3_CMN_PROTO_INT(a_RetType, a_Name, a_Params) \
1432	BS3_DECL_FAR(a_RetType) BS3_CMN_FAR_NM(a_Name) a_Params
1433	# endif
1434	#else
1435	# define BS3_CMN_PROTO_INT(a_RetType, a_Name, a_Params) \
1436	BS3_DECL_NEAR(a_RetType) BS3_CMN_NM(a_Name) a_Params
1437	#endif
1438
1439	/** @def BS3_CMN_PROTO_STUB
1440	* Macro for prototyping all the variations of a common function with automatic
1441	* near -> far stub.
1442	*
1443	* @param a_RetType The return type.
1444	* @param a_Name The function basename.
1445	* @param a_Params The parameter list (in parentheses).
1446	* @sa BS3_CMN_PROTO_NOSB
1447	*/
1448	#define BS3_CMN_PROTO_STUB(a_RetType, a_Name, a_Params) BS3_CMN_PROTO_INT(a_RetType, a_Name, a_Params)
1449
1450	/** @def BS3_CMN_PROTO_NOSB
1451	* Macro for prototyping all the variations of a common function without any
1452	* near > far stub.
1453	*
1454	* @param a_RetType The return type.
1455	* @param a_Name The function basename.
1456	* @param a_Params The parameter list (in parentheses).
1457	* @sa BS3_CMN_PROTO_STUB
1458	*/
1459	#define BS3_CMN_PROTO_NOSB(a_RetType, a_Name, a_Params) BS3_CMN_PROTO_INT(a_RetType, a_Name, a_Params)
1460
1461	/** @def BS3_CMN_PROTO_FARSTUB
1462	* Macro for prototyping all the variations of a common function with automatic
1463	* far -> near stub.
1464	*
1465	* @param a_cbParam16 The size of the 16-bit parameter list in bytes.
1466	* @param a_RetType The return type.
1467	* @param a_Name The function basename.
1468	* @param a_Params The parameter list (in parentheses).
1469	* @sa BS3_CMN_PROTO_STUB
1470	*/
1471	#define BS3_CMN_PROTO_FARSTUB(a_cbParam16, a_RetType, a_Name, a_Params) BS3_CMN_PROTO_INT(a_RetType, a_Name, a_Params)
1472
1473
1474	/** @def BS3_CMN_DEF
1475	* Macro for defining a common function.
1476	*
1477	* This makes 16-bit common function far, while 32-bit and 64-bit are near.
1478	*
1479	* @param a_RetType The return type.
1480	* @param a_Name The function basename.
1481	* @param a_Params The parameter list (in parentheses).
1482	*/
1483	#if ARCH_BITS == 16
1484	# define BS3_CMN_DEF(a_RetType, a_Name, a_Params) \
1485	BS3_DECL_FAR(a_RetType) BS3_CMN_FAR_NM(a_Name) a_Params
1486	#else
1487	# define BS3_CMN_DEF(a_RetType, a_Name, a_Params) \
1488	BS3_DECL_NEAR(a_RetType) BS3_CMN_NM(a_Name) a_Params
1489	#endif
1490
1491	/** @def BS3_ASSERT
1492	* Assert that an expression is true.
1493	*
1494	* Calls Bs3Panic if false and it's a strict build. Does nothing in
1495	* non-strict builds. */
1496	#ifdef BS3_STRICT
1497	# define BS3_ASSERT(a_Expr) do { if (!!(a_Expr)) { /* likely / } else { Bs3Panic(); } } while (0) /< @todo later /
1498	#else
1499	# define BS3_ASSERT(a_Expr) do { } while (0)
1500	#endif
1501
1502	/**
1503	* Panic, never return.
1504	*
1505	* The current implementation will only halt the CPU.
1506	*/
1507	BS3_CMN_PROTO_NOSB(DECL_NO_RETURN(void), Bs3Panic,(void));
1508	#if !defined(BS3_KIT_WITH_NO_RETURN) && defined(__WATCOMC__)
1509	# pragma aux Bs3Panic_c16 __aborts
1510	# pragma aux Bs3Panic_f16 __aborts
1511	# pragma aux Bs3Panic_c32 __aborts
1512	#endif
1513
1514
1515	/**
1516	* Translate a mode into a string.
1517	*
1518	* @returns Pointer to read-only mode name string.
1519	* @param bMode The mode value (BS3_MODE_XXX).
1520	*/
1521	BS3_CMN_PROTO_STUB(const char BS3_FAR *, Bs3GetModeName,(uint8_t bMode));
1522
1523	/**
1524	* Translate a mode into a short lower case string.
1525	*
1526	* @returns Pointer to read-only short mode name string.
1527	* @param bMode The mode value (BS3_MODE_XXX).
1528	*/
1529	BS3_CMN_PROTO_STUB(const char BS3_FAR *, Bs3GetModeNameShortLower,(uint8_t bMode));
1530
1531	/** CPU vendors. */
1532	typedef enum BS3CPUVENDOR
1533	{
1534	BS3CPUVENDOR_INVALID = 0,
1535	BS3CPUVENDOR_INTEL,
1536	BS3CPUVENDOR_AMD,
1537	BS3CPUVENDOR_VIA,
1538	BS3CPUVENDOR_CYRIX,
1539	BS3CPUVENDOR_UNKNOWN,
1540	BS3CPUVENDOR_END
1541	} BS3CPUVENDOR;
1542
1543	/**
1544	* Tries to detect the CPU vendor.
1545	*
1546	* @returns CPU vendor.
1547	*/
1548	BS3_CMN_PROTO_STUB(BS3CPUVENDOR, Bs3GetCpuVendor,(void));
1549
1550	/**
1551	* Shutdown the system, never returns.
1552	*
1553	* This currently only works for VMs. When running on real systems it will
1554	* just halt the CPU.
1555	*/
1556	BS3_CMN_PROTO_NOSB(void, Bs3Shutdown,(void));
1557
1558	/**
1559	* Prints a 32-bit unsigned value as decimal to the screen.
1560	*
1561	* @param uValue The 32-bit value.
1562	*/
1563	BS3_CMN_PROTO_NOSB(void, Bs3PrintU32,(uint32_t uValue));
1564
1565	/**
1566	* Prints a 32-bit unsigned value as hex to the screen.
1567	*
1568	* @param uValue The 32-bit value.
1569	*/
1570	BS3_CMN_PROTO_NOSB(void, Bs3PrintX32,(uint32_t uValue));
1571
1572	/**
1573	* Formats and prints a string to the screen.
1574	*
1575	* See #Bs3StrFormatV for supported format types.
1576	*
1577	* @param pszFormat The format string.
1578	* @param ... Format arguments.
1579	*/
1580	BS3_CMN_PROTO_STUB(size_t, Bs3Printf,(const char BS3_FAR *pszFormat, ...));
1581
1582	/**
1583	* Formats and prints a string to the screen, va_list version.
1584	*
1585	* See #Bs3StrFormatV for supported format types.
1586	*
1587	* @param pszFormat The format string.
1588	* @param va Format arguments.
1589	*/
1590	BS3_CMN_PROTO_STUB(size_t, Bs3PrintfV,(const char BS3_FAR *pszFormat, va_list BS3_FAR va));
1591
1592	/**
1593	* Prints a string to the screen.
1594	*
1595	* @param pszString The string to print.
1596	*/
1597	BS3_CMN_PROTO_STUB(void, Bs3PrintStr,(const char BS3_FAR *pszString));
1598
1599	/**
1600	* Prints a string to the screen.
1601	*
1602	* @param pszString The string to print. Any terminator charss will be printed.
1603	* @param cchString The exact number of characters to print.
1604	*/
1605	BS3_CMN_PROTO_NOSB(void, Bs3PrintStrN,(const char BS3_FAR *pszString, size_t cchString));
1606
1607	/**
1608	* Prints a char to the screen.
1609	*
1610	* @param ch The character to print.
1611	*/
1612	BS3_CMN_PROTO_NOSB(void, Bs3PrintChr,(char ch));
1613
1614
1615	/**
1616	* An output function for #Bs3StrFormatV.
1617	*
1618	* @returns Number of characters written.
1619	* @param ch The character to write. Zero in the final call.
1620	* @param pvUser User argument supplied to #Bs3StrFormatV.
1621	*/
1622	typedef BS3_DECL_CALLBACK(size_t) FNBS3STRFORMATOUTPUT(char ch, void BS3_FAR *pvUser);
1623	/** Pointer to an output function for #Bs3StrFormatV. */
1624	typedef FNBS3STRFORMATOUTPUT *PFNBS3STRFORMATOUTPUT;
1625
1626	/**
1627	* Formats a string, sending the output to @a pfnOutput.
1628	*
1629	* Supported types:
1630	* - %RI8, %RI16, %RI32, %RI64
1631	* - %RU8, %RU16, %RU32, %RU64
1632	* - %RX8, %RX16, %RX32, %RX64
1633	* - %i, %d
1634	* - %u
1635	* - %x
1636	* - %c
1637	* - %p (far pointer)
1638	* - %s (far pointer)
1639	*
1640	* @returns Sum of @a pfnOutput return values.
1641	* @param pszFormat The format string.
1642	* @param va Format arguments.
1643	* @param pfnOutput The output function.
1644	* @param pvUser The user argument for the output function.
1645	*/
1646	BS3_CMN_PROTO_STUB(size_t, Bs3StrFormatV,(const char BS3_FAR *pszFormat, va_list BS3_FAR va,
1647	PFNBS3STRFORMATOUTPUT pfnOutput, void BS3_FAR *pvUser));
1648
1649	/**
1650	* Formats a string into a buffer.
1651	*
1652	* See #Bs3StrFormatV for supported format types.
1653	*
1654	* @returns The length of the formatted string (excluding terminator).
1655	* This will be higher or equal to @c cbBuf in case of an overflow.
1656	* @param pszBuf The output buffer.
1657	* @param cbBuf The size of the output buffer.
1658	* @param pszFormat The format string.
1659	* @param va Format arguments.
1660	*/
1661	BS3_CMN_PROTO_STUB(size_t, Bs3StrPrintfV,(char BS3_FAR pszBuf, size_t cbBuf, const char BS3_FAR pszFormat, va_list BS3_FAR va));
1662
1663	/**
1664	* Formats a string into a buffer.
1665	*
1666	* See #Bs3StrFormatV for supported format types.
1667	*
1668	* @returns The length of the formatted string (excluding terminator).
1669	* This will be higher or equal to @c cbBuf in case of an overflow.
1670	* @param pszBuf The output buffer.
1671	* @param cbBuf The size of the output buffer.
1672	* @param pszFormat The format string.
1673	* @param ... Format arguments.
1674	*/
1675	BS3_CMN_PROTO_STUB(size_t, Bs3StrPrintf,(char BS3_FAR pszBuf, size_t cbBuf, const char BS3_FAR pszFormat, ...));
1676
1677
1678	/**
1679	* Finds the length of a zero terminated string.
1680	*
1681	* @returns String length in chars/bytes.
1682	* @param pszString The string to examine.
1683	*/
1684	BS3_CMN_PROTO_STUB(size_t, Bs3StrLen,(const char BS3_FAR *pszString));
1685
1686	/**
1687	* Finds the length of a zero terminated string, but with a max length.
1688	*
1689	* @returns String length in chars/bytes, or @a cchMax if no zero-terminator
1690	* was found before we reached the limit.
1691	* @param pszString The string to examine.
1692	* @param cchMax The max length to examine.
1693	*/
1694	BS3_CMN_PROTO_STUB(size_t, Bs3StrNLen,(const char BS3_FAR *pszString, size_t cchMax));
1695
1696	/**
1697	* CRT style unsafe strcpy.
1698	*
1699	* @returns pszDst.
1700	* @param pszDst The destination buffer. Must be large enough to
1701	* hold the source string.
1702	* @param pszSrc The source string.
1703	*/
1704	BS3_CMN_PROTO_STUB(char BS3_FAR , Bs3StrCpy,(char BS3_FAR pszDst, const char BS3_FAR *pszSrc));
1705
1706	/**
1707	* CRT style memcpy.
1708	*
1709	* @returns pvDst
1710	* @param pvDst The destination buffer.
1711	* @param pvSrc The source buffer.
1712	* @param cbToCopy The number of bytes to copy.
1713	*/
1714	BS3_CMN_PROTO_STUB(void BS3_FAR , Bs3MemCpy,(void BS3_FAR pvDst, const void BS3_FAR *pvSrc, size_t cbToCopy));
1715
1716	/**
1717	* GNU (?) style mempcpy.
1718	*
1719	* @returns pvDst + cbCopy
1720	* @param pvDst The destination buffer.
1721	* @param pvSrc The source buffer.
1722	* @param cbToCopy The number of bytes to copy.
1723	*/
1724	BS3_CMN_PROTO_STUB(void BS3_FAR , Bs3MemPCpy,(void BS3_FAR pvDst, const void BS3_FAR *pvSrc, size_t cbToCopy));
1725
1726	/**
1727	* CRT style memmove (overlapping buffers is fine).
1728	*
1729	* @returns pvDst
1730	* @param pvDst The destination buffer.
1731	* @param pvSrc The source buffer.
1732	* @param cbToCopy The number of bytes to copy.
1733	*/
1734	BS3_CMN_PROTO_STUB(void BS3_FAR , Bs3MemMove,(void BS3_FAR pvDst, const void BS3_FAR *pvSrc, size_t cbToCopy));
1735
1736	/**
1737	* BSD style bzero.
1738	*
1739	* @param pvDst The buffer to be zeroed.
1740	* @param cbDst The number of bytes to zero.
1741	*/
1742	BS3_CMN_PROTO_NOSB(void, Bs3MemZero,(void BS3_FAR *pvDst, size_t cbDst));
1743
1744	/**
1745	* CRT style memset.
1746	*
1747	* @param pvDst The buffer to be fill.
1748	* @param bFiller The filler byte.
1749	* @param cbDst The number of bytes to fill.
1750	*/
1751	BS3_CMN_PROTO_NOSB(void, Bs3MemSet,(void BS3_FAR *pvDst, uint8_t bFiller, size_t cbDst));
1752
1753	/**
1754	* CRT style memchr.
1755	*
1756	* @param pvHaystack The memory to scan for @a bNeedle.
1757	* @param bNeedle The byte to search for.
1758	* @param cbHaystack The amount of memory to search.
1759	*/
1760	BS3_CMN_PROTO_NOSB(void BS3_FAR , Bs3MemChr,(void const BS3_FAR pvHaystack, uint8_t bNeedle, size_t cbHaystack));
1761
1762	/**
1763	* CRT style memcmp.
1764	*
1765	* @returns 0 if equal. Negative if the left side is 'smaller' than the right
1766	* side, and positive in the other case.
1767	* @param pv1 The left hand memory.
1768	* @param pv2 The right hand memory.
1769	* @param cb The number of bytes to compare.
1770	*/
1771	BS3_CMN_PROTO_NOSB(int, Bs3MemCmp,(void const BS3_FAR pv1, void const BS3_FAR pv2, size_t cb));
1772
1773	BS3_CMN_PROTO_STUB(void, Bs3UInt64Div,(RTUINT64U uDividend, RTUINT64U uDivisor, RTUINT64U BS3_FAR *paQuotientReminder));
1774	BS3_CMN_PROTO_STUB(void, Bs3UInt32Div,(RTUINT32U uDividend, RTUINT32U uDivisor, RTUINT32U BS3_FAR *paQuotientReminder));
1775
1776
1777	/**
1778	* Converts a protected mode 32-bit far pointer to a 32-bit flat address.
1779	*
1780	* @returns 32-bit flat address.
1781	* @param off The segment offset.
1782	* @param uSel The protected mode segment selector.
1783	*/
1784	BS3_CMN_PROTO_STUB(uint32_t, Bs3SelProtFar32ToFlat32,(uint32_t off, uint16_t uSel));
1785
1786	/**
1787	* Converts a current mode 32-bit far pointer to a 32-bit flat address.
1788	*
1789	* @returns 32-bit flat address.
1790	* @param off The segment offset.
1791	* @param uSel The current mode segment selector.
1792	*/
1793	BS3_CMN_PROTO_STUB(uint32_t, Bs3SelFar32ToFlat32,(uint32_t off, uint16_t uSel));
1794
1795	/**
1796	* Wrapper around Bs3SelFar32ToFlat32 that makes it easier to use in tight
1797	* assembly spots.
1798	*
1799	* @returns 32-bit flat address.
1800	* @param off The segment offset.
1801	* @param uSel The current mode segment selector.
1802	* @remarks All register are preserved, except return.
1803	* @remarks No 20h scratch space required in 64-bit mode.
1804	*/
1805	BS3_CMN_PROTO_FARSTUB(6, uint32_t, Bs3SelFar32ToFlat32NoClobber,(uint32_t off, uint16_t uSel));
1806
1807	/**
1808	* Converts a real mode code segment to a protected mode code segment selector.
1809	*
1810	* @returns protected mode segment selector.
1811	* @param uRealSeg Real mode code segment.
1812	* @remarks All register are preserved, except return and parameter.
1813	*/
1814	BS3_CMN_PROTO_NOSB(uint16_t, Bs3SelRealModeCodeToProtMode,(uint16_t uRealSeg));
1815
1816	/**
1817	* Converts a real mode code segment to a protected mode code segment selector.
1818	*
1819	* @returns protected mode segment selector.
1820	* @param uProtSel Real mode code segment.
1821	* @remarks All register are preserved, except return and parameter.
1822	*/
1823	BS3_CMN_PROTO_NOSB(uint16_t, Bs3SelProtModeCodeToRealMode,(uint16_t uProtSel));
1824
1825	/**
1826	* Converts a flat code address to a real mode segment and offset.
1827	*
1828	* @returns Far real mode address (high 16-bit is segment, low is offset).
1829	* @param uFlatAddr Flat code address.
1830	* @remarks All register are preserved, except return and parameter.
1831	*/
1832	BS3_CMN_PROTO_NOSB(uint32_t, Bs3SelFlatCodeToRealMode,(uint32_t uFlatAddr));
1833
1834	/**
1835	* Converts a flat code address to a protected mode 16-bit far pointer (ring-0).
1836	*
1837	* @returns Far 16-bit protected mode address (high 16-bit is segment selector,
1838	* low is segment offset).
1839	* @param uFlatAddr Flat code address.
1840	* @remarks All register are preserved, except return and parameter.
1841	*/
1842	BS3_CMN_PROTO_NOSB(uint32_t, Bs3SelFlatCodeToProtFar16,(uint32_t uFlatAddr));
1843
1844	/**
1845	* Converts a far 16:16 real mode (code) address to a flat address.
1846	*
1847	* @returns 32-bit flat address.
1848	* @param uFar1616 Far real mode address (high 16-bit is segment, low
1849	* is offset).
1850	* @remarks All register are preserved, except return.
1851	* @remarks No 20h scratch space required in 64-bit mode.
1852	* @remarks Exactly the same as Bs3SelRealModeDataToFlat, except for param.
1853	*/
1854	BS3_CMN_PROTO_FARSTUB(4, uint32_t, Bs3SelRealModeCodeToFlat,(PFNBS3FARADDRCONV uFar1616));
1855
1856	/**
1857	* Converts a flat data address to a real mode segment and offset.
1858	*
1859	* @returns Far real mode address (high 16-bit is segment, low is offset)
1860	* @param uFlatAddr Flat code address.
1861	* @remarks All register are preserved, except return.
1862	* @remarks No 20h scratch space required in 64-bit mode.
1863	*/
1864	BS3_CMN_PROTO_FARSTUB(4, uint32_t, Bs3SelFlatDataToRealMode,(uint32_t uFlatAddr));
1865
1866	/**
1867	* Converts a flat data address to a real mode segment and offset.
1868	*
1869	* @returns Far 16-bit protected mode address (high 16-bit is segment selector,
1870	* low is segment offset).
1871	* @param uFlatAddr Flat code address.
1872	* @remarks All register are preserved, except return.
1873	* @remarks No 20h scratch space required in 64-bit mode.
1874	*/
1875	BS3_CMN_PROTO_FARSTUB(4, uint32_t, Bs3SelFlatDataToProtFar16,(uint32_t uFlatAddr));
1876
1877	/**
1878	* Converts a far 16:16 data address to a real mode segment and offset.
1879	*
1880	* @returns Far real mode address (high 16-bit is segment, low is offset)
1881	* @param uFar1616 Far 16-bit protected mode address (high 16-bit is
1882	* segment selector, low is segment offset).
1883	* @remarks All register are preserved, except return.
1884	* @remarks No 20h scratch space required in 64-bit mode.
1885	*/
1886	BS3_CMN_PROTO_FARSTUB(4, uint32_t, Bs3SelProtFar16DataToRealMode,(uint32_t uFar1616));
1887
1888	/**
1889	* Converts a far 16:16 real mode address to a 16-bit protected mode address.
1890	*
1891	* @returns Far real mode address (high 16-bit is segment, low is offset)
1892	* @param uFar1616 Far real mode address (high 16-bit is segment, low
1893	* is offset).
1894	* @remarks All register are preserved, except return.
1895	* @remarks No 20h scratch space required in 64-bit mode.
1896	*/
1897	BS3_CMN_PROTO_FARSTUB(4, uint32_t, Bs3SelRealModeDataToProtFar16,(uint32_t uFar1616));
1898
1899	/**
1900	* Converts a far 16:16 data address to a flat 32-bit address.
1901	*
1902	* @returns 32-bit flat address.
1903	* @param uFar1616 Far 16-bit protected mode address (high 16-bit is
1904	* segment selector, low is segment offset).
1905	* @remarks All register are preserved, except return.
1906	* @remarks No 20h scratch space required in 64-bit mode.
1907	*/
1908	BS3_CMN_PROTO_FARSTUB(4, uint32_t, Bs3SelProtFar16DataToFlat,(uint32_t uFar1616));
1909
1910	/**
1911	* Converts a far 16:16 real mode address to a flat address.
1912	*
1913	* @returns 32-bit flat address.
1914	* @param uFar1616 Far real mode address (high 16-bit is segment, low
1915	* is offset).
1916	* @remarks All register are preserved, except return.
1917	* @remarks No 20h scratch space required in 64-bit mode.
1918	*/
1919	BS3_CMN_PROTO_FARSTUB(4, uint32_t, Bs3SelRealModeDataToFlat,(uint32_t uFar1616));
1920
1921	/**
1922	* Gets a flat address from a working poitner.
1923	*
1924	* @returns flat address (32-bit or 64-bit).
1925	* @param pv Current context pointer.
1926	*/
1927	DECLINLINE(RTCCUINTXREG) Bs3SelPtrToFlat(void BS3_FAR *pv)
1928	{
1929	#if ARCH_BITS == 16
1930	return BS3_CMN_FN_NM(Bs3SelFar32ToFlat32)(BS3_FP_OFF(pv), BS3_FP_SEG(pv));
1931	#else
1932	return (uintptr_t)pv;
1933	#endif
1934	}
1935
1936	/**
1937	* Sets up a 16-bit read-write data selector with ring-3 access and 64KB limit.
1938	*
1939	* @param pDesc Pointer to the descriptor table entry.
1940	* @param uBaseAddr The base address of the descriptor.
1941	*/
1942	BS3_CMN_PROTO_STUB(void, Bs3SelSetup16BitData,(X86DESC BS3_FAR *pDesc, uint32_t uBaseAddr));
1943
1944	/**
1945	* Sets up a 16-bit execute-read selector with a 64KB limit.
1946	*
1947	* @param pDesc Pointer to the descriptor table entry.
1948	* @param uBaseAddr The base address of the descriptor.
1949	* @param bDpl The descriptor privilege level.
1950	*/
1951	BS3_CMN_PROTO_STUB(void, Bs3SelSetup16BitCode,(X86DESC BS3_FAR *pDesc, uint32_t uBaseAddr, uint8_t bDpl));
1952
1953
1954	/**
1955	* Slab control structure list head.
1956	*
1957	* The slabs on the list must all have the same chunk size.
1958	*/
1959	typedef struct BS3SLABHEAD
1960	{
1961	/** Pointer to the first slab. */
1962	BS3_XPTR_MEMBER(struct BS3SLABCTL, pFirst);
1963	/** The allocation chunk size. */
1964	uint16_t cbChunk;
1965	/** Number of slabs in the list. */
1966	uint16_t cSlabs;
1967	/** Number of chunks in the list. */
1968	uint32_t cChunks;
1969	/** Number of free chunks. */
1970	uint32_t cFreeChunks;
1971	} BS3SLABHEAD;
1972	AssertCompileSize(BS3SLABHEAD, 16);
1973	/** Pointer to a slab list head. */
1974	typedef BS3SLABHEAD BS3_FAR *PBS3SLABHEAD;
1975
1976	/**
1977	* Allocation slab control structure.
1978	*
1979	* This may live at the start of the slab for 4KB slabs, while in a separate
1980	* static location for the larger ones.
1981	*/
1982	typedef struct BS3SLABCTL
1983	{
1984	/** Pointer to the next slab control structure in this list. */
1985	BS3_XPTR_MEMBER(struct BS3SLABCTL, pNext);
1986	/** Pointer to the slab list head. */
1987	BS3_XPTR_MEMBER(BS3SLABHEAD, pHead);
1988	/** The base address of the slab. */
1989	BS3_XPTR_MEMBER(uint8_t, pbStart);
1990	/** Number of chunks in this slab. */
1991	uint16_t cChunks;
1992	/** Number of currently free chunks. */
1993	uint16_t cFreeChunks;
1994	/** The chunk size. */
1995	uint16_t cbChunk;
1996	/** The shift count corresponding to cbChunk.
1997	* This is for turning a chunk number into a byte offset and vice versa. */
1998	uint16_t cChunkShift;
1999	/** Bitmap where set bits indicates allocated blocks (variable size,
2000	* multiple of 4). */
2001	uint8_t bmAllocated[4];
2002	} BS3SLABCTL;
2003	/** Pointer to a bs3kit slab control structure. */
2004	typedef BS3SLABCTL BS3_FAR *PBS3SLABCTL;
2005
2006	/** The chunks must all be in the same 16-bit segment tile. */
2007	#define BS3_SLAB_ALLOC_F_SAME_TILE UINT16_C(0x0001)
2008
2009	/**
2010	* Initializes a slab.
2011	*
2012	* @param pSlabCtl The slab control structure to initialize.
2013	* @param cbSlabCtl The size of the slab control structure.
2014	* @param uFlatSlabPtr The base address of the slab.
2015	* @param cbSlab The size of the slab.
2016	* @param cbChunk The chunk size.
2017	*/
2018	BS3_CMN_PROTO_STUB(void, Bs3SlabInit,(PBS3SLABCTL pSlabCtl, size_t cbSlabCtl, uint32_t uFlatSlabPtr,
2019	uint32_t cbSlab, uint16_t cbChunk));
2020
2021	/**
2022	* Allocates one chunk from a slab.
2023	*
2024	* @returns Pointer to a chunk on success, NULL if we're out of chunks.
2025	* @param pSlabCtl The slab constrol structure to allocate from.
2026	*/
2027	BS3_CMN_PROTO_STUB(void BS3_FAR *, Bs3SlabAlloc,(PBS3SLABCTL pSlabCtl));
2028
2029	/**
2030	* Allocates one or more chunks rom a slab.
2031	*
2032	* @returns Pointer to the request number of chunks on success, NULL if we're
2033	* out of chunks.
2034	* @param pSlabCtl The slab constrol structure to allocate from.
2035	* @param cChunks The number of contiguous chunks we want.
2036	* @param fFlags Flags, see BS3_SLAB_ALLOC_F_XXX
2037	*/
2038	BS3_CMN_PROTO_STUB(void BS3_FAR *, Bs3SlabAllocEx,(PBS3SLABCTL pSlabCtl, uint16_t cChunks, uint16_t fFlags));
2039
2040	/**
2041	* Frees one or more chunks from a slab.
2042	*
2043	* @returns Number of chunks actually freed. When correctly used, this will
2044	* match the @a cChunks parameter, of course.
2045	* @param pSlabCtl The slab constrol structure to free from.
2046	* @param uFlatChunkPtr The flat address of the chunks to free.
2047	* @param cChunks The number of contiguous chunks to free.
2048	*/
2049	BS3_CMN_PROTO_STUB(uint16_t, Bs3SlabFree,(PBS3SLABCTL pSlabCtl, uint32_t uFlatChunkPtr, uint16_t cChunks));
2050
2051
2052	/**
2053	* Initializes the given slab list head.
2054	*
2055	* @param pHead The slab list head.
2056	* @param cbChunk The chunk size.
2057	*/
2058	BS3_CMN_PROTO_STUB(void, Bs3SlabListInit,(PBS3SLABHEAD pHead, uint16_t cbChunk));
2059
2060	/**
2061	* Adds an initialized slab control structure to the list.
2062	*
2063	* @param pHead The slab list head to add it to.
2064	* @param pSlabCtl The slab control structure to add.
2065	*/
2066	BS3_CMN_PROTO_STUB(void, Bs3SlabListAdd,(PBS3SLABHEAD pHead, PBS3SLABCTL pSlabCtl));
2067
2068	/**
2069	* Allocates one chunk.
2070	*
2071	* @returns Pointer to a chunk on success, NULL if we're out of chunks.
2072	* @param pHead The slab list to allocate from.
2073	*/
2074	BS3_CMN_PROTO_STUB(void BS3_FAR *, Bs3SlabListAlloc,(PBS3SLABHEAD pHead));
2075
2076	/**
2077	* Allocates one or more chunks.
2078	*
2079	* @returns Pointer to the request number of chunks on success, NULL if we're
2080	* out of chunks.
2081	* @param pHead The slab list to allocate from.
2082	* @param cChunks The number of contiguous chunks we want.
2083	* @param fFlags Flags, see BS3_SLAB_ALLOC_F_XXX
2084	*/
2085	BS3_CMN_PROTO_STUB(void BS3_FAR *, Bs3SlabListAllocEx,(PBS3SLABHEAD pHead, uint16_t cChunks, uint16_t fFlags));
2086
2087	/**
2088	* Frees one or more chunks from a slab list.
2089	*
2090	* @param pHead The slab list to allocate from.
2091	* @param pvChunks Pointer to the first chunk to free.
2092	* @param cChunks The number of contiguous chunks to free.
2093	*/
2094	BS3_CMN_PROTO_STUB(void, Bs3SlabListFree,(PBS3SLABHEAD pHead, void BS3_FAR *pvChunks, uint16_t cChunks));
2095
2096	/**
2097	* Allocation addressing constraints.
2098	*/
2099	typedef enum BS3MEMKIND
2100	{
2101	/** Invalid zero type. */
2102	BS3MEMKIND_INVALID = 0,
2103	/** Real mode addressable memory. */
2104	BS3MEMKIND_REAL,
2105	/** Memory addressable using the 16-bit protected mode tiling. */
2106	BS3MEMKIND_TILED,
2107	/** Memory addressable using 32-bit flat addressing. */
2108	BS3MEMKIND_FLAT32,
2109	/** Memory addressable using 64-bit flat addressing. */
2110	BS3MEMKIND_FLAT64,
2111	/** End of valid types. */
2112	BS3MEMKIND_END,
2113	} BS3MEMKIND;
2114
2115	/**
2116	* Allocates low memory.
2117	*
2118	* @returns Pointer to a chunk on success, NULL if we're out of chunks.
2119	* @param enmKind The kind of addressing constraints imposed on the
2120	* allocation.
2121	* @param cb How much to allocate. Must be 4KB or less.
2122	*/
2123	BS3_CMN_PROTO_STUB(void BS3_FAR *, Bs3MemAlloc,(BS3MEMKIND enmKind, size_t cb));
2124
2125	/**
2126	* Allocates zero'ed memory.
2127	*
2128	* @param enmKind The kind of addressing constraints imposed on the
2129	* allocation.
2130	* @param cb How much to allocate. Must be 4KB or less.
2131	*/
2132	BS3_CMN_PROTO_STUB(void BS3_FAR *, Bs3MemAllocZ,(BS3MEMKIND enmKind, size_t cb));
2133
2134	/**
2135	* Frees memory.
2136	*
2137	* @returns Pointer to a chunk on success, NULL if we're out of chunks.
2138	* @param pv The memory to free (returned by #Bs3MemAlloc).
2139	* @param cb The size of the allocation.
2140	*/
2141	BS3_CMN_PROTO_STUB(void, Bs3MemFree,(void BS3_FAR *pv, size_t cb));
2142
2143	/**
2144	* Allocates a page with non-present pages on each side.
2145	*
2146	* @returns Pointer to the usable page. NULL on failure. Use
2147	* Bs3MemGuardedTestPageFree to free the allocation.
2148	* @param enmKind The kind of addressing constraints imposed on the
2149	* allocation.
2150	*/
2151	BS3_CMN_PROTO_STUB(void BS3_FAR *, Bs3MemGuardedTestPageAlloc,(BS3MEMKIND enmKind));
2152
2153	/**
2154	* Allocates a page with pages on each side to the @a fPte specification.
2155	*
2156	* @returns Pointer to the usable page. NULL on failure. Use
2157	* Bs3MemGuardedTestPageFree to free the allocation.
2158	* @param enmKind The kind of addressing constraints imposed on the
2159	* allocation.
2160	* @param fPte The page table entry specification for the guard pages.
2161	*/
2162	BS3_CMN_PROTO_STUB(void BS3_FAR *, Bs3MemGuardedTestPageAllocEx,(BS3MEMKIND enmKind, uint64_t fPte));
2163
2164	/**
2165	* Frees guarded page allocated by Bs3MemGuardedTestPageAlloc or
2166	* Bs3MemGuardedTestPageAllocEx.
2167	*
2168	* @param pvGuardedPage Pointer returned by Bs3MemGuardedTestPageAlloc or
2169	* Bs3MemGuardedTestPageAllocEx. NULL is ignored.
2170	*/
2171	BS3_CMN_PROTO_STUB(void, Bs3MemGuardedTestPageFree,(void BS3_FAR *pvGuardedPage));
2172
2173	/**
2174	* Print all heap info.
2175	*/
2176	BS3_CMN_PROTO_STUB(void, Bs3MemPrintInfo, (void));
2177
2178	/** Highes RAM byte below 4G. */
2179	extern uint32_t g_uBs3EndOfRamBelow4G;
2180
2181
2182	/**
2183	* Enables the A20 gate.
2184	*/
2185	BS3_CMN_PROTO_NOSB(void, Bs3A20Enable,(void));
2186
2187	/**
2188	* Enables the A20 gate via the keyboard controller
2189	*/
2190	BS3_CMN_PROTO_NOSB(void, Bs3A20EnableViaKbd,(void));
2191
2192	/**
2193	* Enables the A20 gate via the PS/2 control port A.
2194	*/
2195	BS3_CMN_PROTO_NOSB(void, Bs3A20EnableViaPortA,(void));
2196
2197	/**
2198	* Disables the A20 gate.
2199	*/
2200	BS3_CMN_PROTO_NOSB(void, Bs3A20Disable,(void));
2201
2202	/**
2203	* Disables the A20 gate via the keyboard controller
2204	*/
2205	BS3_CMN_PROTO_NOSB(void, Bs3A20DisableViaKbd,(void));
2206
2207	/**
2208	* Disables the A20 gate via the PS/2 control port A.
2209	*/
2210	BS3_CMN_PROTO_NOSB(void, Bs3A20DisableViaPortA,(void));
2211
2212
2213	/**
2214	* Initializes root page tables for page protected mode (PP16, PP32).
2215	*
2216	* @returns IPRT status code.
2217	* @remarks Must not be called in real-mode!
2218	*/
2219	BS3_CMN_PROTO_STUB(int, Bs3PagingInitRootForPP,(void));
2220
2221	/**
2222	* Initializes root page tables for PAE page protected mode (PAE16, PAE32).
2223	*
2224	* @returns IPRT status code.
2225	* @remarks The default long mode page tables depends on the PAE ones.
2226	* @remarks Must not be called in real-mode!
2227	*/
2228	BS3_CMN_PROTO_STUB(int, Bs3PagingInitRootForPAE,(void));
2229
2230	/**
2231	* Initializes root page tables for long mode (LM16, LM32, LM64).
2232	*
2233	* @returns IPRT status code.
2234	* @remarks The default long mode page tables depends on the PAE ones.
2235	* @remarks Must not be called in real-mode!
2236	*/
2237	BS3_CMN_PROTO_STUB(int, Bs3PagingInitRootForLM,(void));
2238
2239	/**
2240	* Modifies the page table protection of an address range.
2241	*
2242	* This only works on the lowest level of the page tables in the current mode.
2243	*
2244	* Since we generally use the largest pages available when setting up the
2245	* initial page tables, this function will usually have to allocate and create
2246	* more tables. This may fail if we're low on memory.
2247	*
2248	* @returns IPRT status code.
2249	* @param uFlat The flat address of the first page in the range (rounded
2250	* down nearest page boundrary).
2251	* @param cb The range size from @a pv (rounded up to nearest page boundrary).
2252	* @param fSet Mask of zero or more X86_PTE_XXX values to set for the range.
2253	* @param fClear Mask of zero or more X86_PTE_XXX values to clear for the range.
2254	*/
2255	BS3_CMN_PROTO_STUB(int, Bs3PagingProtect,(uint64_t uFlat, uint64_t cb, uint64_t fSet, uint64_t fClear));
2256
2257	/**
2258	* Modifies the page table protection of an address range.
2259	*
2260	* This only works on the lowest level of the page tables in the current mode.
2261	*
2262	* Since we generally use the largest pages available when setting up the
2263	* initial page tables, this function will usually have to allocate and create
2264	* more tables. This may fail if we're low on memory.
2265	*
2266	* @returns IPRT status code.
2267	* @param pv The address of the first page in the range (rounded
2268	* down nearest page boundrary).
2269	* @param cb The range size from @a pv (rounded up to nearest page boundrary).
2270	* @param fSet Mask of zero or more X86_PTE_XXX values to set for the range.
2271	* @param fClear Mask of zero or more X86_PTE_XXX values to clear for the range.
2272	*/
2273	BS3_CMN_PROTO_STUB(int, Bs3PagingProtectPtr,(void BS3_FAR *pv, size_t cb, uint64_t fSet, uint64_t fClear));
2274
2275	/**
2276	* Aliases (maps) one or more contiguous physical pages to a virtual range.
2277	*
2278	* @returns VBox status code.
2279	* @retval VERR_INVALID_PARAMETER if we're in legacy paging mode and @a uDst or
2280	* @a uPhysToAlias are not compatible with legacy paging.
2281	* @retval VERR_OUT_OF_RANGE if we cannot traverse the page tables in this mode
2282	* (typically real mode or v86, maybe 16-bit PE).
2283	* @retval VERR_NO_MEMORY if we cannot allocate page tables for splitting up
2284	* the necessary large pages. No aliasing was performed.
2285	*
2286	* @param uDst The virtual address to map it at. Rounded down
2287	* to the nearest page (@a cbHowMuch is adjusted
2288	* up).
2289	* @param uPhysToAlias The physical address of the first page in the
2290	* (contiguous) range to map. Chopped down to
2291	* nearest page boundrary (@a cbHowMuch is not
2292	* adjusted).
2293	* @param cbHowMuch How much to map. Rounded up to nearest page.
2294	* @param fPte The PTE flags.
2295	*/
2296	BS3_CMN_PROTO_STUB(int, Bs3PagingAlias,(uint64_t uDst, uint64_t uPhysToAlias, uint32_t cbHowMuch, uint64_t fPte));
2297
2298	/**
2299	* Unaliases memory, i.e. restores the 1:1 mapping.
2300	*
2301	* @returns VBox status code. Cannot fail if @a uDst and @a cbHowMuch specify
2302	* the range of a successful Bs3PagingAlias call, however it may run
2303	* out of memory if it's breaking new ground.
2304	*
2305	* @param uDst The virtual address to restore to 1:1 mapping.
2306	* Rounded down to the nearest page (@a cbHowMuch
2307	* is adjusted up).
2308	* @param cbHowMuch How much to restore. Rounded up to nearest page.
2309	*/
2310	BS3_CMN_PROTO_STUB(int, Bs3PagingUnalias,(uint64_t uDst, uint32_t cbHowMuch));
2311
2312	/**
2313	* Get the pointer to the PTE for the given address.
2314	*
2315	* @returns Pointer to the PTE.
2316	* @param uFlat The flat address of the page which PTE we want.
2317	* @param prc Where to return additional error info. Optional.
2318	*/
2319	BS3_CMN_PROTO_STUB(void BS3_FAR , Bs3PagingGetPte,(uint64_t uFlat, int prc));
2320
2321	/**
2322	* Paging information for an address.
2323	*/
2324	typedef struct BS3PAGINGINFO4ADDR
2325	{
2326	/** The depth of the system's paging mode.
2327	* This is always 2 for legacy, 3 for PAE and 4 for long mode. */
2328	uint8_t cEntries;
2329	/** The size of the page structures (the entires). */
2330	uint8_t cbEntry;
2331	/** Flags defined for future fun, currently zero. */
2332	uint16_t fFlags;
2333	/** Union display different view on the entry pointers. */
2334	union
2335	{
2336	/** Pointer to the page structure entries, starting with the PTE as 0.
2337	* If large pages are involved, the first entry will be NULL (first two if 1GB
2338	* page). Same if the address is invalid on a higher level. */
2339	uint8_t BS3_FAR *apbEntries[4];
2340	/** Alternative view for legacy mode. */
2341	struct
2342	{
2343	X86PTE BS3_FAR *pPte;
2344	X86PDE BS3_FAR *pPde;
2345	void *pvUnused2;
2346	void *pvUnused3;
2347	} Legacy;
2348	/** Alternative view for PAE and Long mode. */
2349	struct
2350	{
2351	X86PTEPAE BS3_FAR *pPte;
2352	X86PDEPAE BS3_FAR *pPde;
2353	X86PDPE BS3_FAR *pPdpe;
2354	X86PML4E BS3_FAR *pPml4e;
2355	} Pae;
2356	} u;
2357	} BS3PAGINGINFO4ADDR;
2358	/** Pointer to paging information for and address. */
2359	typedef BS3PAGINGINFO4ADDR BS3_FAR *PBS3PAGINGINFO4ADDR;
2360
2361	/**
2362	* Queries paging information about the given virtual address.
2363	*
2364	* @returns VBox status code.
2365	* @param uFlat The flat address to query information about.
2366	* @param pPgInfo Where to return the information.
2367	*/
2368	BS3_CMN_PROTO_STUB(int, Bs3PagingQueryAddressInfo,(uint64_t uFlat, PBS3PAGINGINFO4ADDR pPgInfo));
2369
2370
2371	/** The physical / flat address of the buffer backing the canonical traps.
2372	* This buffer is spread equally on each side of the 64-bit non-canonical
2373	* address divide. Non-64-bit code can use this to setup trick shots and
2374	* inspect their results. */
2375	extern uint32_t g_uBs3PagingCanonicalTrapsAddr;
2376	/** The size of the buffer at g_uPagingCanonicalTraps (both sides). */
2377	extern uint16_t g_cbBs3PagingCanonicalTraps;
2378	/** The size of one trap buffer (low or high).
2379	* This is g_cbBs3PagingCanonicalTraps divided by two. */
2380	extern uint16_t g_cbBs3PagingOneCanonicalTrap;
2381
2382	/**
2383	* Sets up the 64-bit canonical address space trap buffers, if neceessary.
2384	*
2385	* @returns Pointer to the buffers (i.e. the first page of the low one) on
2386	* success. NULL on failure.
2387	*/
2388	BS3_CMN_PROTO_STUB(void BS3_FAR *, Bs3PagingSetupCanonicalTraps,(void));
2389
2390	/**
2391	* Waits for the keyboard controller to become ready.
2392	*/
2393	BS3_CMN_PROTO_NOSB(void, Bs3KbdWait,(void));
2394
2395	/**
2396	* Sends a read command to the keyboard controller and gets the result.
2397	*
2398	* The caller is responsible for making sure the keyboard controller is ready
2399	* for a command (call #Bs3KbdWait if unsure).
2400	*
2401	* @returns The value read is returned (in al).
2402	* @param bCmd The read command.
2403	*/
2404	BS3_CMN_PROTO_NOSB(uint8_t, Bs3KbdRead,(uint8_t bCmd));
2405
2406	/**
2407	* Sends a write command to the keyboard controller and then sends the data.
2408	*
2409	* The caller is responsible for making sure the keyboard controller is ready
2410	* for a command (call #Bs3KbdWait if unsure).
2411	*
2412	* @param bCmd The write command.
2413	* @param bData The data to write.
2414	*/
2415	BS3_CMN_PROTO_NOSB(void, Bs3KbdWrite,(uint8_t bCmd, uint8_t bData));
2416
2417
2418	/**
2419	* Configures the PIC, once only.
2420	*
2421	* Subsequent calls to this function will not do anything.
2422	*
2423	* The PIC will be programmed to use IDT/IVT vectors 0x70 thru 0x7f, auto
2424	* end-of-interrupt, and all IRQs masked. The individual PIC users will have to
2425	* use #Bs3PicUpdateMask unmask their IRQ once they've got all the handlers
2426	* installed.
2427	*/
2428	BS3_CMN_PROTO_STUB(void, Bs3PicSetup,(void));
2429
2430	/**
2431	* Updates the PIC masks.
2432	*
2433	* @returns The new mask - master in low, slave in high byte.
2434	* @param fAndMask Things to keep as-is. Master in low, slave in high byte.
2435	* @param fOrMask Things to start masking. Ditto wrt bytes.
2436	*/
2437	BS3_CMN_PROTO_STUB(uint16_t, Bs3PicUpdateMask,(uint16_t fAndMask, uint16_t fOrMask));
2438
2439	/**
2440	* Disables all IRQs on the PIC.
2441	*/
2442	BS3_CMN_PROTO_STUB(void, Bs3PicMaskAll,(void));
2443
2444
2445	/**
2446	* Sets up the PIT for periodic callback.
2447	*
2448	* @param cHzDesired The desired Hz. Zero means max interval length
2449	* (18.2Hz). Plase check the various PIT globals for
2450	* the actual interval length.
2451	*/
2452	BS3_CMN_PROTO_STUB(void, Bs3PitSetupAndEnablePeriodTimer,(uint16_t cHzDesired));
2453
2454	/**
2455	* Disables the PIT if active.
2456	*/
2457	BS3_CMN_PROTO_STUB(void, Bs3PitDisable,(void));
2458
2459	/** Nano seconds (approx) since last the PIT timer was started. */
2460	extern uint64_t volatile g_cBs3PitNs;
2461	/** Milliseconds seconds (very approx) since last the PIT timer was started. */
2462	extern uint64_t volatile g_cBs3PitMs;
2463	/** Number of ticks since last the PIT timer was started. */
2464	extern uint32_t volatile g_cBs3PitTicks;
2465	/** The current interval in nanon seconds. */
2466	extern uint32_t g_cBs3PitIntervalNs;
2467	/** The current interval in milliseconds (approximately).
2468	* This is 0 if not yet started (used for checking the state internally). */
2469	extern uint16_t volatile g_cBs3PitIntervalMs;
2470	/** The current PIT frequency (approximately). 0 if not yet started. */
2471	extern uint16_t g_cBs3PitIntervalHz;
2472
2473
2474	/**
2475	* Call 16-bit prot mode function from v8086 mode.
2476	*
2477	* This switches from v8086 mode to 16-bit protected mode (code) and executed
2478	* @a fpfnCall with @a cbParams bytes of parameters pushed on the stack.
2479	* Afterwards it switches back to v8086 mode and returns a 16-bit status code.
2480	*
2481	* @returns 16-bit status code if the function returned anything.
2482	* @param fpfnCall Far real mode pointer to the function to call.
2483	* @param cbParams The size of the parameter list, in bytes.
2484	* @param ... The parameters.
2485	* @sa Bs3SwitchTo32BitAndCallC
2486	*/
2487	BS3_CMN_PROTO_STUB(int, Bs3SwitchFromV86To16BitAndCallC,(FPFNBS3FAR fpfnCall, unsigned cbParams, ...));
2488
2489
2490	/**
2491	* BS3 integer register.
2492	*/
2493	typedef union BS3REG
2494	{
2495	/** 8-bit unsigned integer. */
2496	uint8_t u8;
2497	/** 16-bit unsigned integer. */
2498	uint16_t u16;
2499	/** 32-bit unsigned integer. */
2500	uint32_t u32;
2501	/** 64-bit unsigned integer. */
2502	uint64_t u64;
2503	/** Full unsigned integer. */
2504	uint64_t u;
2505	/** High/low byte view. */
2506	struct
2507	{
2508	uint8_t bLo;
2509	uint8_t bHi;
2510	} b;
2511	/** 8-bit view. */
2512	uint8_t au8[8];
2513	/** 16-bit view. */
2514	uint16_t au16[4];
2515	/** 32-bit view. */
2516	uint32_t au32[2];
2517	} BS3REG;
2518	/** Pointer to an integer register. */
2519	typedef BS3REG BS3_FAR *PBS3REG;
2520	/** Pointer to a const integer register. */
2521	typedef BS3REG const BS3_FAR *PCBS3REG;
2522
2523	/**
2524	* Register context (without FPU).
2525	*/
2526	typedef struct BS3REGCTX
2527	{
2528	BS3REG rax; /*< 0x00 /
2529	BS3REG rcx; /*< 0x08 /
2530	BS3REG rdx; /*< 0x10 /
2531	BS3REG rbx; /*< 0x18 /
2532	BS3REG rsp; /*< 0x20 /
2533	BS3REG rbp; /*< 0x28 /
2534	BS3REG rsi; /*< 0x30 /
2535	BS3REG rdi; /*< 0x38 /
2536	BS3REG r8; /*< 0x40 /
2537	BS3REG r9; /*< 0x48 /
2538	BS3REG r10; /*< 0x50 /
2539	BS3REG r11; /*< 0x58 /
2540	BS3REG r12; /*< 0x60 /
2541	BS3REG r13; /*< 0x68 /
2542	BS3REG r14; /*< 0x70 /
2543	BS3REG r15; /*< 0x78 /
2544	BS3REG rflags; /*< 0x80 /
2545	BS3REG rip; /*< 0x88 /
2546	uint16_t cs; /*< 0x90 /
2547	uint16_t ds; /*< 0x92 /
2548	uint16_t es; /*< 0x94 /
2549	uint16_t fs; /*< 0x96 /
2550	uint16_t gs; /*< 0x98 /
2551	uint16_t ss; /*< 0x9a /
2552	uint16_t tr; /*< 0x9c /
2553	uint16_t ldtr; /*< 0x9e /
2554	uint8_t bMode; /*< 0xa0: BS3_MODE_XXX. /
2555	uint8_t bCpl; /*< 0xa1: 0-3, 0 is used for real mode. /
2556	uint8_t fbFlags; /*< 0xa2: BS3REG_CTX_F_XXX /
2557	uint8_t abPadding[5]; /*< 0xa3 /
2558	BS3REG cr0; /*< 0xa8 /
2559	BS3REG cr2; /*< 0xb0 /
2560	BS3REG cr3; /*< 0xb8 /
2561	BS3REG cr4; /*< 0xc0 /
2562	uint64_t uUnused; /*< 0xc8 /
2563	} BS3REGCTX;
2564	AssertCompileSize(BS3REGCTX, 0xd0);
2565	/** Pointer to a register context. */
2566	typedef BS3REGCTX BS3_FAR *PBS3REGCTX;
2567	/** Pointer to a const register context. */
2568	typedef BS3REGCTX const BS3_FAR *PCBS3REGCTX;
2569
2570	/** @name BS3REG_CTX_F_XXX - BS3REGCTX::fbFlags masks.
2571	* @{ */
2572	/** The CR0 is MSW (only low 16-bit). */
2573	#define BS3REG_CTX_F_NO_CR0_IS_MSW UINT8_C(0x01)
2574	/** No CR2 and CR3 values. Not in CPL 0 or CPU too old for CR2 & CR3. */
2575	#define BS3REG_CTX_F_NO_CR2_CR3 UINT8_C(0x02)
2576	/** No CR4 value. The CPU is too old for CR4. */
2577	#define BS3REG_CTX_F_NO_CR4 UINT8_C(0x04)
2578	/** No TR and LDTR values. Context gathered in real mode or v8086 mode. */
2579	#define BS3REG_CTX_F_NO_TR_LDTR UINT8_C(0x08)
2580	/** The context doesn't have valid values for AMD64 GPR extensions. */
2581	#define BS3REG_CTX_F_NO_AMD64 UINT8_C(0x10)
2582	/** @} */
2583
2584	/**
2585	* Saves the current register context.
2586	*
2587	* @param pRegCtx Where to store the register context.
2588	*/
2589	BS3_CMN_PROTO_NOSB(void, Bs3RegCtxSave,(PBS3REGCTX pRegCtx));
2590
2591	/**
2592	* Switch to the specified CPU bitcount, reserve additional stack and save the
2593	* CPU context.
2594	*
2595	* This is for writing more flexible test drivers that can test more than the
2596	* CPU bitcount (16-bit, 32-bit, 64-bit, and virtual 8086) of the driver itself.
2597	* For instance a 32-bit driver can do V86 and 16-bit testing, thus saving more
2598	* precious and problematic 16-bit code.
2599	*
2600	* @param pRegCtx Where to store the register context.
2601	* @param bBitMode Bit mode to switch to, BS3_MODE_CODE_XXX. Only
2602	* BS3_MODE_CODE_MASK is used, other bits are ignored
2603	* to make it possible to pass a full mode value.
2604	* @param cbExtraStack Number of bytes of additional stack to allocate.
2605	*/
2606	BS3_CMN_PROTO_FARSTUB(8, void, Bs3RegCtxSaveEx,(PBS3REGCTX pRegCtx, uint8_t bBitMode, uint16_t cbExtraStack));
2607
2608	/**
2609	* Transforms a register context to a different ring.
2610	*
2611	* @param pRegCtx The register context.
2612	* @param bRing The target ring (0..3).
2613	*/
2614	BS3_CMN_PROTO_STUB(void, Bs3RegCtxConvertToRingX,(PBS3REGCTX pRegCtx, uint8_t bRing));
2615
2616	/**
2617	* Restores a register context.
2618	*
2619	* @param pRegCtx The register context to be restored and resumed.
2620	* @param fFlags BS3REGCTXRESTORE_F_XXX.
2621	*
2622	* @remarks Will switch to ring-0.
2623	* @remarks Does not return.
2624	*/
2625	BS3_CMN_PROTO_NOSB(DECL_NO_RETURN(void), Bs3RegCtxRestore,(PCBS3REGCTX pRegCtx, uint16_t fFlags));
2626	#if !defined(BS3_KIT_WITH_NO_RETURN) && defined(__WATCOMC__)
2627	# pragma aux Bs3RegCtxRestore_c16 "_Bs3RegCtxRestore_aborts_c16" __aborts
2628	# pragma aux Bs3RegCtxRestore_f16 "_Bs3RegCtxRestore_aborts_f16" __aborts
2629	# pragma aux Bs3RegCtxRestore_c32 "_Bs3RegCtxRestore_aborts_c32" __aborts
2630	#endif
2631
2632	/** @name Flags for Bs3RegCtxRestore
2633	* @{ */
2634	/** Skip restoring the CRx registers. */
2635	#define BS3REGCTXRESTORE_F_SKIP_CRX UINT16_C(0x0001)
2636	/** Sets g_fBs3TrapNoV86Assist. */
2637	#define BS3REGCTXRESTORE_F_NO_V86_ASSIST UINT16_C(0x0002)
2638	/** @} */
2639
2640	/**
2641	* Prints the register context.
2642	*
2643	* @param pRegCtx The register context to be printed.
2644	*/
2645	BS3_CMN_PROTO_STUB(void, Bs3RegCtxPrint,(PCBS3REGCTX pRegCtx));
2646
2647	/**
2648	* Sets a GPR and segment register to point at the same location as @a uFlat.
2649	*
2650	* @param pRegCtx The register context.
2651	* @param pGpr The general purpose register to set (points within
2652	* @a pRegCtx).
2653	* @param pSel The selector register (points within @a pRegCtx).
2654	* @param uFlat Flat location address.
2655	*/
2656	BS3_CMN_PROTO_STUB(void, Bs3RegCtxSetGrpSegFromFlat,(PBS3REGCTX pRegCtx, PBS3REG pGpr, PRTSEL pSel, RTCCUINTXREG uFlat));
2657
2658	/**
2659	* Sets a GPR and segment register to point at the same location as @a ovPtr.
2660	*
2661	* @param pRegCtx The register context.
2662	* @param pGpr The general purpose register to set (points within
2663	* @a pRegCtx).
2664	* @param pSel The selector register (points within @a pRegCtx).
2665	* @param pvPtr Current context pointer.
2666	*/
2667	BS3_CMN_PROTO_STUB(void, Bs3RegCtxSetGrpSegFromCurPtr,(PBS3REGCTX pRegCtx, PBS3REG pGpr, PRTSEL pSel, void BS3_FAR *pvPtr));
2668
2669	/**
2670	* Sets a GPR and DS to point at the same location as @a ovPtr.
2671	*
2672	* @param pRegCtx The register context.
2673	* @param pGpr The general purpose register to set (points within
2674	* @a pRegCtx).
2675	* @param pvPtr Current context pointer.
2676	*/
2677	BS3_CMN_PROTO_STUB(void, Bs3RegCtxSetGrpDsFromCurPtr,(PBS3REGCTX pRegCtx, PBS3REG pGpr, void BS3_FAR *pvPtr));
2678
2679	/**
2680	* Sets CS:RIP to point at the same piece of code as @a uFlatCode.
2681	*
2682	* @param pRegCtx The register context.
2683	* @param uFlatCode Flat code pointer
2684	* @sa Bs3RegCtxSetRipCsFromLnkPtr, Bs3RegCtxSetRipCsFromCurPtr
2685	*/
2686	BS3_CMN_PROTO_STUB(void, Bs3RegCtxSetRipCsFromFlat,(PBS3REGCTX pRegCtx, RTCCUINTXREG uFlatCode));
2687
2688	/**
2689	* Sets CS:RIP to point at the same piece of code as @a pfnCode.
2690	*
2691	* The 16-bit edition of this function expects a far 16:16 address as written by
2692	* the linker (i.e. real mode).
2693	*
2694	* @param pRegCtx The register context.
2695	* @param pfnCode Pointer to the code. In 32-bit and 64-bit mode this is a
2696	* flat address, while in 16-bit it's a far 16:16 address
2697	* as fixed up by the linker (real mode selector). This
2698	* address is converted to match the mode of the context.
2699	* @sa Bs3RegCtxSetRipCsFromCurPtr, Bs3RegCtxSetRipCsFromFlat
2700	*/
2701	BS3_CMN_PROTO_STUB(void, Bs3RegCtxSetRipCsFromLnkPtr,(PBS3REGCTX pRegCtx, FPFNBS3FAR pfnCode));
2702
2703	/**
2704	* Sets CS:RIP to point at the same piece of code as @a pfnCode.
2705	*
2706	* @param pRegCtx The register context.
2707	* @param pfnCode Pointer to the code. Current mode pointer.
2708	* @sa Bs3RegCtxSetRipCsFromLnkPtr, Bs3RegCtxSetRipCsFromFlat
2709	*/
2710	BS3_CMN_PROTO_STUB(void, Bs3RegCtxSetRipCsFromCurPtr,(PBS3REGCTX pRegCtx, FPFNBS3FAR pfnCode));
2711
2712
2713	/**
2714	* The method to be used to save and restore the extended context.
2715	*/
2716	typedef enum BS3EXTCTXMETHOD
2717	{
2718	BS3EXTCTXMETHOD_INVALID = 0,
2719	BS3EXTCTXMETHOD_ANCIENT, /*< Ancient fnsave/frstor format. /
2720	BS3EXTCTXMETHOD_FXSAVE, /*< fxsave/fxrstor format. /
2721	BS3EXTCTXMETHOD_XSAVE, /*< xsave/xrstor format. /
2722	BS3EXTCTXMETHOD_END,
2723	} BS3EXTCTXMETHOD;
2724
2725
2726	/**
2727	* Extended CPU context (FPU, SSE, AVX, ++).
2728	*
2729	* @remarks Also in bs3kit.inc
2730	*/
2731	typedef struct BS3EXTCTX
2732	{
2733	/** Dummy/magic value. */
2734	uint16_t u16Magic;
2735	/** The size of the structure. */
2736	uint16_t cb;
2737	/** The method used to save and restore the context (BS3EXTCTXMETHOD). */
2738	uint8_t enmMethod;
2739	uint8_t abPadding0[3];
2740	/** Nominal XSAVE_C_XXX. */
2741	uint64_t fXcr0Nominal;
2742	/** The saved XCR0 mask (restored after xrstor). */
2743	uint64_t fXcr0Saved;
2744
2745	/** Explicit alignment padding. */
2746	uint8_t abPadding[64 - 2 - 2 - 1 - 3 - 8 - 8];
2747
2748	/** The context, variable size (see above).
2749	* This must be aligned on a 64 byte boundrary. */
2750	union
2751	{
2752	/** fnsave/frstor. */
2753	X86FPUSTATE Ancient;
2754	/** fxsave/fxrstor */
2755	X86FXSTATE x87;
2756	/** xsave/xrstor */
2757	X86XSAVEAREA x;
2758	/** Byte array view. */
2759	uint8_t ab[sizeof(X86XSAVEAREA)];
2760	} Ctx;
2761	} BS3EXTCTX;
2762	AssertCompileMemberAlignment(BS3EXTCTX, Ctx, 64);
2763	/** Pointer to an extended CPU context. */
2764	typedef BS3EXTCTX BS3_FAR *PBS3EXTCTX;
2765	/** Pointer to a const extended CPU context. */
2766	typedef BS3EXTCTX const BS3_FAR *PCBS3EXTCTX;
2767
2768	/** Magic value for BS3EXTCTX. */
2769	#define BS3EXTCTX_MAGIC UINT16_C(0x1980)
2770
2771	/**
2772	* Allocates and initializes the extended CPU context structure.
2773	*
2774	* @returns The new extended CPU context structure.
2775	* @param enmKind The kind of allocation to make.
2776	*/
2777	BS3_CMN_PROTO_STUB(PBS3EXTCTX, Bs3ExtCtxAlloc,(BS3MEMKIND enmKind));
2778
2779	/**
2780	* Frees an extended CPU context structure.
2781	*
2782	* @param pExtCtx The extended CPU context (returned by
2783	* Bs3ExtCtxAlloc).
2784	*/
2785	BS3_CMN_PROTO_STUB(void, Bs3ExtCtxFree,(PBS3EXTCTX pExtCtx));
2786
2787	/**
2788	* Get the size required for a BS3EXTCTX structure.
2789	*
2790	* @returns size in bytes of the whole structure.
2791	* @param pfFlags Where to return flags for Bs3ExtCtxInit.
2792	* @note Use Bs3ExtCtxAlloc when possible.
2793	*/
2794	BS3_CMN_PROTO_STUB(uint16_t, Bs3ExtCtxGetSize,(uint64_t *pfFlags));
2795
2796	/**
2797	* Initializes the extended CPU context structure.
2798	* @returns pExtCtx
2799	* @param pExtCtx The extended CPU context.
2800	* @param cbExtCtx The size of the @a pExtCtx allocation.
2801	* @param fFlags XSAVE_C_XXX flags.
2802	*/
2803	BS3_CMN_PROTO_STUB(PBS3EXTCTX, Bs3ExtCtxInit,(PBS3EXTCTX pExtCtx, uint16_t cbExtCtx, uint64_t fFlags));
2804
2805	/**
2806	* Saves the extended CPU state to the given structure.
2807	*
2808	* @param pExtCtx The extended CPU context.
2809	* @remarks All GPRs preserved.
2810	*/
2811	BS3_CMN_PROTO_FARSTUB(4, void, Bs3ExtCtxSave,(PBS3EXTCTX pExtCtx));
2812
2813	/**
2814	* Restores the extended CPU state from the given structure.
2815	*
2816	* @param pExtCtx The extended CPU context.
2817	* @remarks All GPRs preserved.
2818	*/
2819	BS3_CMN_PROTO_FARSTUB(4, void, Bs3ExtCtxRestore,(PBS3EXTCTX pExtCtx));
2820
2821	/**
2822	* Copies the state from one context to another.
2823	*
2824	* @returns pDst
2825	* @param pDst The destination extended CPU context.
2826	* @param pSrc The source extended CPU context.
2827	*/
2828	BS3_CMN_PROTO_STUB(PBS3EXTCTX, Bs3ExtCtxCopy,(PBS3EXTCTX pDst, PCBS3EXTCTX pSrc));
2829
2830
2831	/** @name Debug register accessors for V8086 mode (works everwhere).
2832	* @{ */
2833	BS3_CMN_PROTO_NOSB(RTCCUINTXREG, Bs3RegGetDr0,(void));
2834	BS3_CMN_PROTO_NOSB(RTCCUINTXREG, Bs3RegGetDr1,(void));
2835	BS3_CMN_PROTO_NOSB(RTCCUINTXREG, Bs3RegGetDr2,(void));
2836	BS3_CMN_PROTO_NOSB(RTCCUINTXREG, Bs3RegGetDr3,(void));
2837	BS3_CMN_PROTO_NOSB(RTCCUINTXREG, Bs3RegGetDr6,(void));
2838	BS3_CMN_PROTO_NOSB(RTCCUINTXREG, Bs3RegGetDr7,(void));
2839
2840	BS3_CMN_PROTO_NOSB(void, Bs3RegSetDr0,(RTCCUINTXREG uValue));
2841	BS3_CMN_PROTO_NOSB(void, Bs3RegSetDr1,(RTCCUINTXREG uValue));
2842	BS3_CMN_PROTO_NOSB(void, Bs3RegSetDr2,(RTCCUINTXREG uValue));
2843	BS3_CMN_PROTO_NOSB(void, Bs3RegSetDr3,(RTCCUINTXREG uValue));
2844	BS3_CMN_PROTO_NOSB(void, Bs3RegSetDr6,(RTCCUINTXREG uValue));
2845	BS3_CMN_PROTO_NOSB(void, Bs3RegSetDr7,(RTCCUINTXREG uValue));
2846
2847	BS3_CMN_PROTO_NOSB(RTCCUINTXREG, Bs3RegGetDrX,(uint8_t iReg));
2848	BS3_CMN_PROTO_NOSB(void, Bs3RegSetDrX,(uint8_t iReg, RTCCUINTXREG uValue));
2849	/** @} */
2850
2851
2852	/** @name Control register accessors for V8086 mode (works everwhere).
2853	* @{ */
2854	BS3_CMN_PROTO_NOSB(RTCCUINTXREG, Bs3RegGetCr0,(void));
2855	BS3_CMN_PROTO_NOSB(RTCCUINTXREG, Bs3RegGetCr2,(void));
2856	BS3_CMN_PROTO_NOSB(RTCCUINTXREG, Bs3RegGetCr3,(void));
2857	BS3_CMN_PROTO_NOSB(RTCCUINTXREG, Bs3RegGetCr4,(void));
2858	BS3_CMN_PROTO_NOSB(uint16_t, Bs3RegGetTr,(void));
2859	BS3_CMN_PROTO_NOSB(uint16_t, Bs3RegGetLdtr,(void));
2860
2861	BS3_CMN_PROTO_NOSB(void, Bs3RegSetCr0,(RTCCUINTXREG uValue));
2862	BS3_CMN_PROTO_NOSB(void, Bs3RegSetCr2,(RTCCUINTXREG uValue));
2863	BS3_CMN_PROTO_NOSB(void, Bs3RegSetCr3,(RTCCUINTXREG uValue));
2864	BS3_CMN_PROTO_NOSB(void, Bs3RegSetCr4,(RTCCUINTXREG uValue));
2865	BS3_CMN_PROTO_NOSB(void, Bs3RegSetTr,(uint16_t uValue));
2866	BS3_CMN_PROTO_NOSB(void, Bs3RegSetLdtr,(uint16_t uValue));
2867	/** @} */
2868
2869
2870	/**
2871	* Trap frame.
2872	*/
2873	typedef struct BS3TRAPFRAME
2874	{
2875	/** 0x00: Exception/interrupt number. */
2876	uint8_t bXcpt;
2877	/** 0x01: The size of the IRET frame. */
2878	uint8_t cbIretFrame;
2879	/** 0x02: The handler CS. */
2880	uint16_t uHandlerCs;
2881	/** 0x04: The handler SS. */
2882	uint16_t uHandlerSs;
2883	/** 0x06: Explicit alignment. */
2884	uint16_t usAlignment;
2885	/** 0x08: The handler RSP (pointer to the iret frame, skipping ErrCd). */
2886	uint64_t uHandlerRsp;
2887	/** 0x10: The handler RFLAGS value. */
2888	uint64_t fHandlerRfl;
2889	/** 0x18: The error code (if applicable). */
2890	uint64_t uErrCd;
2891	/** 0x20: The register context. */
2892	BS3REGCTX Ctx;
2893	} BS3TRAPFRAME;
2894	AssertCompileSize(BS3TRAPFRAME, 0x20 + 0xd0);
2895	/** Pointer to a trap frame. */
2896	typedef BS3TRAPFRAME BS3_FAR *PBS3TRAPFRAME;
2897	/** Pointer to a const trap frame. */
2898	typedef BS3TRAPFRAME const BS3_FAR *PCBS3TRAPFRAME;
2899
2900
2901	/**
2902	* Re-initializes the trap handling for the current mode.
2903	*
2904	* Useful after a test that messes with the IDT/IVT.
2905	*
2906	* @sa Bs3TrapInit
2907	*/
2908	BS3_CMN_PROTO_STUB(void, Bs3TrapReInit,(void));
2909
2910	/**
2911	* Initializes real mode and v8086 trap handling.
2912	*
2913	* @remarks Does not install RM/V86 trap handling, just initializes the
2914	* structures.
2915	*/
2916	BS3_CMN_PROTO_STUB(void, Bs3TrapRmV86Init,(void));
2917
2918	/**
2919	* Initializes real mode and v8086 trap handling, extended version.
2920	*
2921	* @param f386Plus Set if the CPU is 80386 or later and
2922	* extended registers should be saved. Once initialized
2923	* with this parameter set to @a true, the effect cannot be
2924	* reversed.
2925	*
2926	* @remarks Does not install RM/V86 trap handling, just initializes the
2927	* structures.
2928	*/
2929	BS3_CMN_PROTO_STUB(void, Bs3TrapRmV86InitEx,(bool f386Plus));
2930
2931	/**
2932	* Initializes 16-bit (protected mode) trap handling.
2933	*
2934	* @remarks Does not install 16-bit trap handling, just initializes the
2935	* structures.
2936	*/
2937	BS3_CMN_PROTO_STUB(void, Bs3Trap16Init,(void));
2938
2939	/**
2940	* Initializes 16-bit (protected mode) trap handling, extended version.
2941	*
2942	* @param f386Plus Set if the CPU is 80386 or later and
2943	* extended registers should be saved. Once initialized
2944	* with this parameter set to @a true, the effect cannot be
2945	* reversed.
2946	*
2947	* @remarks Does not install 16-bit trap handling, just initializes the
2948	* structures.
2949	*/
2950	BS3_CMN_PROTO_STUB(void, Bs3Trap16InitEx,(bool f386Plus));
2951
2952	/**
2953	* Initializes 32-bit trap handling.
2954	*
2955	* @remarks Does not install 32-bit trap handling, just initializes the
2956	* structures.
2957	*/
2958	BS3_CMN_PROTO_STUB(void, Bs3Trap32Init,(void));
2959
2960	/**
2961	* Initializes 64-bit trap handling
2962	*
2963	* @remarks Does not install 64-bit trap handling, just initializes the
2964	* structures.
2965	*/
2966	BS3_CMN_PROTO_STUB(void, Bs3Trap64Init,(void));
2967
2968	/**
2969	* Modifies the real-mode / V86 IVT entry specified by @a iIvt.
2970	*
2971	* @param iIvt The index of the IDT entry to set.
2972	* @param uSeg The handler real-mode segment.
2973	* @param off The handler offset.
2974	*/
2975	BS3_CMN_PROTO_STUB(void, Bs3TrapRmV86SetGate,(uint8_t iIvt, uint16_t uSeg, uint16_t off));
2976
2977	/**
2978	* Modifies the 16-bit IDT entry (protected mode) specified by @a iIdt.
2979	*
2980	* @param iIdt The index of the IDT entry to set.
2981	* @param bType The gate type (X86_SEL_TYPE_SYS_XXX).
2982	* @param bDpl The DPL.
2983	* @param uSel The handler selector.
2984	* @param off The handler offset (if applicable).
2985	* @param cParams The parameter count (for call gates).
2986	*/
2987	BS3_CMN_PROTO_STUB(void, Bs3Trap16SetGate,(uint8_t iIdt, uint8_t bType, uint8_t bDpl,
2988	uint16_t uSel, uint16_t off, uint8_t cParams));
2989
2990	/** The address of Bs3Trap16GenericEntries.
2991	* Bs3Trap16GenericEntries is an array of interrupt/trap/whatever entry
2992	* points, 8 bytes each, that will create a register frame and call the generic
2993	* C compatible trap handlers. */
2994	extern uint32_t g_Bs3Trap16GenericEntriesFlatAddr;
2995
2996	/**
2997	* Modifies the 32-bit IDT entry specified by @a iIdt.
2998	*
2999	* @param iIdt The index of the IDT entry to set.
3000	* @param bType The gate type (X86_SEL_TYPE_SYS_XXX).
3001	* @param bDpl The DPL.
3002	* @param uSel The handler selector.
3003	* @param off The handler offset (if applicable).
3004	* @param cParams The parameter count (for call gates).
3005	*/
3006	BS3_CMN_PROTO_STUB(void, Bs3Trap32SetGate,(uint8_t iIdt, uint8_t bType, uint8_t bDpl,
3007	uint16_t uSel, uint32_t off, uint8_t cParams));
3008
3009	/** The address of Bs3Trap32GenericEntries.
3010	* Bs3Trap32GenericEntries is an array of interrupt/trap/whatever entry
3011	* points, 10 bytes each, that will create a register frame and call the generic
3012	* C compatible trap handlers. */
3013	extern uint32_t g_Bs3Trap32GenericEntriesFlatAddr;
3014
3015	/**
3016	* Modifies the 64-bit IDT entry specified by @a iIdt.
3017	*
3018	* @param iIdt The index of the IDT entry to set.
3019	* @param bType The gate type (X86_SEL_TYPE_SYS_XXX).
3020	* @param bDpl The DPL.
3021	* @param uSel The handler selector.
3022	* @param off The handler offset (if applicable).
3023	* @param bIst The interrupt stack to use.
3024	*/
3025	BS3_CMN_PROTO_STUB(void, Bs3Trap64SetGate,(uint8_t iIdt, uint8_t bType, uint8_t bDpl, uint16_t uSel, uint64_t off, uint8_t bIst));
3026
3027	/** The address of Bs3Trap64GenericEntries.
3028	* Bs3Trap64GenericEntries is an array of interrupt/trap/whatever entry
3029	* points, 8 bytes each, that will create a register frame and call the generic
3030	* C compatible trap handlers. */
3031	extern uint32_t g_Bs3Trap64GenericEntriesFlatAddr;
3032
3033	/**
3034	* Adjusts the DPL the IDT entry specified by @a iIdt.
3035	*
3036	* The change is applied to the 16-bit, 32-bit and 64-bit IDTs.
3037	*
3038	* @returns Old DPL (from 64-bit IDT).
3039	* @param iIdt The index of the IDT and IVT entry to set.
3040	* @param bDpl The DPL.
3041	*/
3042	BS3_CMN_PROTO_STUB(uint8_t, Bs3TrapSetDpl,(uint8_t iIdt, uint8_t bDpl));
3043
3044	/**
3045	* C-style trap handler.
3046	*
3047	* The caller will resume the context in @a pTrapFrame upon return.
3048	*
3049	* @param pTrapFrame The trap frame. Registers can be modified.
3050	* @note The 16-bit versions must be in CGROUP16!
3051	*/
3052	typedef BS3_DECL_NEAR_CALLBACK(void) FNBS3TRAPHANDLER(PBS3TRAPFRAME pTrapFrame);
3053	/** Pointer to a trap handler (current template context). */
3054	typedef FNBS3TRAPHANDLER *PFNBS3TRAPHANDLER;
3055
3056	#if ARCH_BITS == 16
3057	/** @copydoc FNBS3TRAPHANDLER */
3058	typedef FNBS3FAR FNBS3TRAPHANDLER32;
3059	/** @copydoc FNBS3TRAPHANDLER */
3060	typedef FNBS3FAR FNBS3TRAPHANDLER64;
3061	#else
3062	/** @copydoc FNBS3TRAPHANDLER */
3063	typedef FNBS3TRAPHANDLER FNBS3TRAPHANDLER32;
3064	/** @copydoc FNBS3TRAPHANDLER */
3065	typedef FNBS3TRAPHANDLER FNBS3TRAPHANDLER64;
3066	#endif
3067	/** @copydoc PFNBS3TRAPHANDLER */
3068	typedef FNBS3TRAPHANDLER32 *PFNBS3TRAPHANDLER32;
3069	/** @copydoc PFNBS3TRAPHANDLER */
3070	typedef FNBS3TRAPHANDLER64 *PFNBS3TRAPHANDLER64;
3071
3072
3073	/**
3074	* C-style trap handler, near 16-bit (CGROUP16).
3075	*
3076	* The caller will resume the context in @a pTrapFrame upon return.
3077	*
3078	* @param pTrapFrame The trap frame. Registers can be modified.
3079	*/
3080	typedef BS3_DECL_NEAR_CALLBACK(void) FNBS3TRAPHANDLER16(PBS3TRAPFRAME pTrapFrame);
3081	/** Pointer to a trap handler (current template context). */
3082	typedef FNBS3TRAPHANDLER16 *PFNBS3TRAPHANDLER16;
3083
3084	/**
3085	* C-style trap handler, near 16-bit (CGROUP16).
3086	*
3087	* The caller will resume the context in @a pTrapFrame upon return.
3088	*
3089	* @param pTrapFrame The trap frame. Registers can be modified.
3090	*/
3091	typedef BS3_DECL_CALLBACK(void) FNBS3TRAPHANDLER3264(PBS3TRAPFRAME pTrapFrame);
3092	/** Pointer to a trap handler (current template context). */
3093	typedef FNBS3TRAPHANDLER3264 *FPFNBS3TRAPHANDLER3264;
3094
3095
3096	/**
3097	* Sets a trap handler (C/C++/assembly) for the current bitcount.
3098	*
3099	* @returns Previous handler.
3100	* @param iIdt The index of the IDT entry to set.
3101	* @param pfnHandler Pointer to the handler.
3102	* @sa Bs3TrapSetHandlerEx
3103	*/
3104	BS3_CMN_PROTO_STUB(PFNBS3TRAPHANDLER, Bs3TrapSetHandler,(uint8_t iIdt, PFNBS3TRAPHANDLER pfnHandler));
3105
3106	/**
3107	* Sets a trap handler (C/C++/assembly) for all the bitcounts.
3108	*
3109	* @param iIdt The index of the IDT and IVT entry to set.
3110	* @param pfnHandler16 Pointer to the 16-bit handler. (Assumes linker addresses.)
3111	* @param pfnHandler32 Pointer to the 32-bit handler. (Assumes linker addresses.)
3112	* @param pfnHandler64 Pointer to the 64-bit handler. (Assumes linker addresses.)
3113	* @sa Bs3TrapSetHandler
3114	*/
3115	BS3_CMN_PROTO_STUB(void, Bs3TrapSetHandlerEx,(uint8_t iIdt, PFNBS3TRAPHANDLER16 pfnHandler16,
3116	PFNBS3TRAPHANDLER32 pfnHandler32, PFNBS3TRAPHANDLER64 pfnHandler64));
3117
3118	/**
3119	* Default C/C++ trap handler.
3120	*
3121	* This will check trap record and panic if no match was found.
3122	*
3123	* @param pTrapFrame Trap frame of the trap to handle.
3124	*/
3125	BS3_CMN_PROTO_STUB(void, Bs3TrapDefaultHandler,(PBS3TRAPFRAME pTrapFrame));
3126
3127	/**
3128	* Prints the trap frame (to screen).
3129	* @param pTrapFrame Trap frame to print.
3130	*/
3131	BS3_CMN_PROTO_STUB(void, Bs3TrapPrintFrame,(PCBS3TRAPFRAME pTrapFrame));
3132
3133	/**
3134	* Sets up a long jump from a trap handler.
3135	*
3136	* The long jump will only be performed onced, but will catch any kind of trap,
3137	* fault, interrupt or irq.
3138	*
3139	* @retval true on the initial call.
3140	* @retval false on trap return.
3141	* @param pTrapFrame Where to store the trap information when
3142	* returning @c false.
3143	* @sa #Bs3TrapUnsetJmp
3144	*/
3145	BS3_CMN_PROTO_NOSB(DECL_RETURNS_TWICE(bool),Bs3TrapSetJmp,(PBS3TRAPFRAME pTrapFrame));
3146
3147	/**
3148	* Combination of #Bs3TrapSetJmp and #Bs3RegCtxRestore.
3149	*
3150	* @param pCtxRestore The context to restore.
3151	* @param pTrapFrame Where to store the trap information.
3152	*/
3153	BS3_CMN_PROTO_STUB(void, Bs3TrapSetJmpAndRestore,(PCBS3REGCTX pCtxRestore, PBS3TRAPFRAME pTrapFrame));
3154
3155	/**
3156	* Disables a previous #Bs3TrapSetJmp call.
3157	*/
3158	BS3_CMN_PROTO_STUB(void, Bs3TrapUnsetJmp,(void));
3159
3160
3161	/**
3162	* The current test step.
3163	*/
3164	extern uint16_t g_usBs3TestStep;
3165
3166	/**
3167	* Equivalent to RTTestCreate + RTTestBanner.
3168	*
3169	* @param pszTest The test name.
3170	*/
3171	BS3_CMN_PROTO_STUB(void, Bs3TestInit,(const char BS3_FAR *pszTest));
3172
3173
3174	/**
3175	* Equivalent to RTTestSummaryAndDestroy.
3176	*/
3177	BS3_CMN_PROTO_STUB(void, Bs3TestTerm,(void));
3178
3179	/**
3180	* Equivalent to RTTestISub.
3181	*/
3182	BS3_CMN_PROTO_STUB(void, Bs3TestSub,(const char BS3_FAR *pszSubTest));
3183
3184	/**
3185	* Equivalent to RTTestIFailedF.
3186	*/
3187	BS3_CMN_PROTO_STUB(void, Bs3TestSubF,(const char BS3_FAR *pszFormat, ...));
3188
3189	/**
3190	* Equivalent to RTTestISubV.
3191	*/
3192	BS3_CMN_PROTO_STUB(void, Bs3TestSubV,(const char BS3_FAR *pszFormat, va_list BS3_FAR va));
3193
3194	/**
3195	* Equivalent to RTTestISubDone.
3196	*/
3197	BS3_CMN_PROTO_STUB(void, Bs3TestSubDone,(void));
3198
3199	/**
3200	* Equivalent to RTTestSubErrorCount.
3201	*/
3202	BS3_CMN_PROTO_STUB(uint16_t, Bs3TestSubErrorCount,(void));
3203
3204	/**
3205	* Equivalent to RTTestIPrintf with RTTESTLVL_ALWAYS.
3206	*
3207	* @param pszFormat What to print, format string. Explicit newline char.
3208	* @param ... String format arguments.
3209	*/
3210	BS3_CMN_PROTO_STUB(void, Bs3TestPrintf,(const char BS3_FAR *pszFormat, ...));
3211
3212	/**
3213	* Equivalent to RTTestIPrintfV with RTTESTLVL_ALWAYS.
3214	*
3215	* @param pszFormat What to print, format string. Explicit newline char.
3216	* @param va String format arguments.
3217	*/
3218	BS3_CMN_PROTO_STUB(void, Bs3TestPrintfV,(const char BS3_FAR *pszFormat, va_list BS3_FAR va));
3219
3220	/**
3221	* Same as Bs3TestPrintf, except no guest screen echo.
3222	*
3223	* @param pszFormat What to print, format string. Explicit newline char.
3224	* @param ... String format arguments.
3225	*/
3226	BS3_CMN_PROTO_STUB(void, Bs3TestHostPrintf,(const char BS3_FAR *pszFormat, ...));
3227
3228	/**
3229	* Same as Bs3TestPrintfV, except no guest screen echo.
3230	*
3231	* @param pszFormat What to print, format string. Explicit newline char.
3232	* @param va String format arguments.
3233	*/
3234	BS3_CMN_PROTO_STUB(void, Bs3TestHostPrintfV,(const char BS3_FAR *pszFormat, va_list BS3_FAR va));
3235
3236	/**
3237	* Equivalent to RTTestIFailed.
3238	* @returns false.
3239	*/
3240	BS3_CMN_PROTO_STUB(bool, Bs3TestFailed,(const char BS3_FAR *pszMessage));
3241
3242	/**
3243	* Equivalent to RTTestIFailedF.
3244	* @returns false.
3245	*/
3246	BS3_CMN_PROTO_STUB(bool, Bs3TestFailedF,(const char BS3_FAR *pszFormat, ...));
3247
3248	/**
3249	* Equivalent to RTTestIFailedV.
3250	* @returns false.
3251	*/
3252	BS3_CMN_PROTO_STUB(bool, Bs3TestFailedV,(const char BS3_FAR *pszFormat, va_list BS3_FAR va));
3253
3254	/**
3255	* Equivalent to RTTestISkipped.
3256	*
3257	* @param pszWhy Optional reason why it's being skipped.
3258	*/
3259	BS3_CMN_PROTO_STUB(void, Bs3TestSkipped,(const char BS3_FAR *pszWhy));
3260
3261	/**
3262	* Equivalent to RTTestISkippedF.
3263	*
3264	* @param pszFormat Optional reason why it's being skipped.
3265	* @param ... Format arguments.
3266	*/
3267	BS3_CMN_PROTO_STUB(void, Bs3TestSkippedF,(const char BS3_FAR *pszFormat, ...));
3268
3269	/**
3270	* Equivalent to RTTestISkippedV.
3271	*
3272	* @param pszFormat Optional reason why it's being skipped.
3273	* @param va Format arguments.
3274	*/
3275	BS3_CMN_PROTO_STUB(void, Bs3TestSkippedV,(const char BS3_FAR *pszFormat, va_list BS3_FAR va));
3276
3277	/**
3278	* Compares two register contexts, with PC and SP adjustments.
3279	*
3280	* Differences will be reported as test failures.
3281	*
3282	* @returns true if equal, false if not.
3283	* @param pActualCtx The actual register context.
3284	* @param pExpectedCtx Expected register context.
3285	* @param cbPcAdjust Program counter adjustment (applied to @a pExpectedCtx).
3286	* @param cbSpAdjust Stack pointer adjustment (applied to @a pExpectedCtx).
3287	* @param fExtraEfl Extra EFLAGS to OR into @a pExepctedCtx.
3288	* @param pszMode CPU mode or some other helpful text.
3289	* @param idTestStep Test step identifier.
3290	*/
3291	BS3_CMN_PROTO_STUB(bool, Bs3TestCheckRegCtxEx,(PCBS3REGCTX pActualCtx, PCBS3REGCTX pExpectedCtx, uint16_t cbPcAdjust,
3292	int16_t cbSpAdjust, uint32_t fExtraEfl, const char *pszMode, uint16_t idTestStep));
3293
3294	/**
3295	* Performs the testing for the given mode.
3296	*
3297	* This is called with the CPU already switch to that mode.
3298	*
3299	* @returns 0 on success or directly Bs3TestFailed calls, non-zero to indicate
3300	* where the test when wrong. Special value BS3TESTDOMODE_SKIPPED
3301	* should be returned to indicate that the test has been skipped.
3302	* @param bMode The current CPU mode.
3303	*/
3304	typedef BS3_DECL_CALLBACK(uint8_t) FNBS3TESTDOMODE(uint8_t bMode);
3305	/** Pointer (far) to a test (for 32-bit and 64-bit code, will be flatten). */
3306	typedef FNBS3TESTDOMODE *PFNBS3TESTDOMODE;
3307
3308	/** Special FNBS3TESTDOMODE return code for indicating a skipped mode test. */
3309	#define BS3TESTDOMODE_SKIPPED UINT8_MAX
3310
3311	/**
3312	* Mode sub-test entry.
3313	*
3314	* This can only be passed around to functions with the same bit count, as it
3315	* contains function pointers. In 16-bit mode, the 16-bit pointers are near and
3316	* implies BS3TEXT16, whereas the 32-bit and 64-bit pointers are far real mode
3317	* addresses that will be converted to flat address prior to calling them.
3318	* Similarly, in 32-bit and 64-bit the addresses are all flat and the 16-bit
3319	* ones will be converted to BS3TEXT16 based addresses prior to calling.
3320	*/
3321	typedef struct BS3TESTMODEENTRY
3322	{
3323	/** The sub-test name to be passed to Bs3TestSub if not NULL. */
3324	const char * BS3_FAR pszSubTest;
3325
3326	PFNBS3TESTDOMODE pfnDoRM;
3327
3328	PFNBS3TESTDOMODE pfnDoPE16;
3329	PFNBS3TESTDOMODE pfnDoPE16_32;
3330	PFNBS3TESTDOMODE pfnDoPE16_V86;
3331	PFNBS3TESTDOMODE pfnDoPE32;
3332	PFNBS3TESTDOMODE pfnDoPE32_16;
3333	PFNBS3TESTDOMODE pfnDoPEV86;
3334
3335	PFNBS3TESTDOMODE pfnDoPP16;
3336	PFNBS3TESTDOMODE pfnDoPP16_32;
3337	PFNBS3TESTDOMODE pfnDoPP16_V86;
3338	PFNBS3TESTDOMODE pfnDoPP32;
3339	PFNBS3TESTDOMODE pfnDoPP32_16;
3340	PFNBS3TESTDOMODE pfnDoPPV86;
3341
3342	PFNBS3TESTDOMODE pfnDoPAE16;
3343	PFNBS3TESTDOMODE pfnDoPAE16_32;
3344	PFNBS3TESTDOMODE pfnDoPAE16_V86;
3345	PFNBS3TESTDOMODE pfnDoPAE32;
3346	PFNBS3TESTDOMODE pfnDoPAE32_16;
3347	PFNBS3TESTDOMODE pfnDoPAEV86;
3348
3349	PFNBS3TESTDOMODE pfnDoLM16;
3350	PFNBS3TESTDOMODE pfnDoLM32;
3351	PFNBS3TESTDOMODE pfnDoLM64;
3352
3353	} BS3TESTMODEENTRY;
3354	/** Pointer to a mode sub-test entry. */
3355	typedef BS3TESTMODEENTRY const *PCBS3TESTMODEENTRY;
3356
3357	/** @def BS3TESTMODEENTRY_CMN
3358	* Produces a BS3TESTMODEENTRY initializer for common (c16,c32,c64) test
3359	* functions. */
3360	#define BS3TESTMODEENTRY_CMN(a_szTest, a_BaseNm) \
3361	{ /pszSubTest =/ a_szTest, \
3362	/RM/ RT_CONCAT(a_BaseNm, _c16), \
3363	/PE16/ RT_CONCAT(a_BaseNm, _c16), \
3364	/PE16_32/ RT_CONCAT(a_BaseNm, _c32), \
3365	/PE16_V86/ RT_CONCAT(a_BaseNm, _c16), \
3366	/PE32/ RT_CONCAT(a_BaseNm, _c32), \
3367	/PE32_16/ RT_CONCAT(a_BaseNm, _c16), \
3368	/PEV86/ RT_CONCAT(a_BaseNm, _c16), \
3369	/PP16/ RT_CONCAT(a_BaseNm, _c16), \
3370	/PP16_32/ RT_CONCAT(a_BaseNm, _c32), \
3371	/PP16_V86/ RT_CONCAT(a_BaseNm, _c16), \
3372	/PP32/ RT_CONCAT(a_BaseNm, _c32), \
3373	/PP32_16/ RT_CONCAT(a_BaseNm, _c16), \
3374	/PPV86/ RT_CONCAT(a_BaseNm, _c16), \
3375	/PAE16/ RT_CONCAT(a_BaseNm, _c16), \
3376	/PAE16_32/ RT_CONCAT(a_BaseNm, _c32), \
3377	/PAE16_V86/ RT_CONCAT(a_BaseNm, _c16), \
3378	/PAE32/ RT_CONCAT(a_BaseNm, _c32), \
3379	/PAE32_16/ RT_CONCAT(a_BaseNm, _c16), \
3380	/PAEV86/ RT_CONCAT(a_BaseNm, _c16), \
3381	/LM16/ RT_CONCAT(a_BaseNm, _c16), \
3382	/LM32/ RT_CONCAT(a_BaseNm, _c32), \
3383	/LM64/ RT_CONCAT(a_BaseNm, _c64), \
3384	}
3385
3386	/** @def BS3TESTMODE_PROTOTYPES_CMN
3387	* A set of standard protypes to go with #BS3TESTMODEENTRY_CMN. */
3388	#define BS3TESTMODE_PROTOTYPES_CMN(a_BaseNm) \
3389	FNBS3TESTDOMODE /BS3_FAR_CODE/ RT_CONCAT(a_BaseNm, _c16); \
3390	FNBS3TESTDOMODE /BS3_FAR_CODE/ RT_CONCAT(a_BaseNm, _c32); \
3391	FNBS3TESTDOMODE /BS3_FAR_CODE/ RT_CONCAT(a_BaseNm, _c64)
3392
3393	/** @def BS3TESTMODEENTRY_CMN_64
3394	* Produces a BS3TESTMODEENTRY initializer for common 64-bit test functions. */
3395	#define BS3TESTMODEENTRY_CMN_64(a_szTest, a_BaseNm) \
3396	{ /pszSubTest =/ a_szTest, \
3397	/RM/ NULL, \
3398	/PE16/ NULL, \
3399	/PE16_32/ NULL, \
3400	/PE16_V86/ NULL, \
3401	/PE32/ NULL, \
3402	/PE32_16/ NULL, \
3403	/PEV86/ NULL, \
3404	/PP16/ NULL, \
3405	/PP16_32/ NULL, \
3406	/PP16_V86/ NULL, \
3407	/PP32/ NULL, \
3408	/PP32_16/ NULL, \
3409	/PPV86/ NULL, \
3410	/PAE16/ NULL, \
3411	/PAE16_32/ NULL, \
3412	/PAE16_V86/ NULL, \
3413	/PAE32/ NULL, \
3414	/PAE32_16/ NULL, \
3415	/PAEV86/ NULL, \
3416	/LM16/ NULL, \
3417	/LM32/ NULL, \
3418	/LM64/ RT_CONCAT(a_BaseNm, _c64), \
3419	}
3420
3421	/** @def BS3TESTMODE_PROTOTYPES_CMN
3422	* Standard protype to go with #BS3TESTMODEENTRY_CMN_64. */
3423	#define BS3TESTMODE_PROTOTYPES_CMN_64(a_BaseNm) \
3424	FNBS3TESTDOMODE /BS3_FAR_CODE/ RT_CONCAT(a_BaseNm, _c64)
3425
3426	/** @def BS3TESTMODEENTRY_MODE
3427	* Produces a BS3TESTMODEENTRY initializer for a full set of mode test
3428	* functions. */
3429	#define BS3TESTMODEENTRY_MODE(a_szTest, a_BaseNm) \
3430	{ /pszSubTest =/ a_szTest, \
3431	/RM/ RT_CONCAT(a_BaseNm, _rm), \
3432	/PE16/ RT_CONCAT(a_BaseNm, _pe16), \
3433	/PE16_32/ RT_CONCAT(a_BaseNm, _pe16_32), \
3434	/PE16_V86/ RT_CONCAT(a_BaseNm, _pe16_v86), \
3435	/PE32/ RT_CONCAT(a_BaseNm, _pe32), \
3436	/PE32_16/ RT_CONCAT(a_BaseNm, _pe32_16), \
3437	/PEV86/ RT_CONCAT(a_BaseNm, _pev86), \
3438	/PP16/ RT_CONCAT(a_BaseNm, _pp16), \
3439	/PP16_32/ RT_CONCAT(a_BaseNm, _pp16_32), \
3440	/PP16_V86/ RT_CONCAT(a_BaseNm, _pp16_v86), \
3441	/PP32/ RT_CONCAT(a_BaseNm, _pp32), \
3442	/PP32_16/ RT_CONCAT(a_BaseNm, _pp32_16), \
3443	/PPV86/ RT_CONCAT(a_BaseNm, _ppv86), \
3444	/PAE16/ RT_CONCAT(a_BaseNm, _pae16), \
3445	/PAE16_32/ RT_CONCAT(a_BaseNm, _pae16_32), \
3446	/PAE16_V86/ RT_CONCAT(a_BaseNm, _pae16_v86), \
3447	/PAE32/ RT_CONCAT(a_BaseNm, _pae32), \
3448	/PAE32_16/ RT_CONCAT(a_BaseNm, _pae32_16), \
3449	/PAEV86/ RT_CONCAT(a_BaseNm, _paev86), \
3450	/LM16/ RT_CONCAT(a_BaseNm, _lm16), \
3451	/LM32/ RT_CONCAT(a_BaseNm, _lm32), \
3452	/LM64/ RT_CONCAT(a_BaseNm, _lm64), \
3453	}
3454
3455	/** @def BS3TESTMODE_PROTOTYPES_MODE
3456	* A set of standard protypes to go with #BS3TESTMODEENTRY_MODE. */
3457	#define BS3TESTMODE_PROTOTYPES_MODE(a_BaseNm) \
3458	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _rm); \
3459	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pe16); \
3460	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pe16_32); \
3461	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pe16_v86); \
3462	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pe32); \
3463	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pe32_16); \
3464	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pev86); \
3465	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pp16); \
3466	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pp16_32); \
3467	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pp16_v86); \
3468	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pp32); \
3469	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pp32_16); \
3470	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _ppv86); \
3471	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pae16); \
3472	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pae16_32); \
3473	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pae16_v86); \
3474	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pae32); \
3475	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pae32_16); \
3476	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _paev86); \
3477	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _lm16); \
3478	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _lm32); \
3479	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _lm64)
3480
3481
3482	/**
3483	* Mode sub-test entry, max bit-count driven
3484	*
3485	* This is an alternative to BS3TESTMODEENTRY where a few workers (test drivers)
3486	* does all the work, using faster 32-bit and 64-bit code where possible. This
3487	* avoids executing workers in V8086 mode. It allows for modifying and checking
3488	* 64-bit register content when testing LM16 and LM32.
3489	*
3490	* The 16-bit workers are only used for real mode and 16-bit protected mode.
3491	* So, the 16-bit version of the code template can be stripped of anything
3492	* related to paging and/or v8086, saving code space.
3493	*/
3494	typedef struct BS3TESTMODEBYMAXENTRY
3495	{
3496	/** The sub-test name to be passed to Bs3TestSub if not NULL. */
3497	const char * BS3_FAR pszSubTest;
3498
3499	PFNBS3TESTDOMODE pfnDoRM;
3500	PFNBS3TESTDOMODE pfnDoPE16;
3501	PFNBS3TESTDOMODE pfnDoPE16_32;
3502	PFNBS3TESTDOMODE pfnDoPE32;
3503	PFNBS3TESTDOMODE pfnDoPP16_32;
3504	PFNBS3TESTDOMODE pfnDoPP32;
3505	PFNBS3TESTDOMODE pfnDoPAE16_32;
3506	PFNBS3TESTDOMODE pfnDoPAE32;
3507	PFNBS3TESTDOMODE pfnDoLM64;
3508
3509	bool fDoRM : 1;
3510
3511	bool fDoPE16 : 1;
3512	bool fDoPE16_32 : 1;
3513	bool fDoPE16_V86 : 1;
3514	bool fDoPE32 : 1;
3515	bool fDoPE32_16 : 1;
3516	bool fDoPEV86 : 1;
3517
3518	bool fDoPP16 : 1;
3519	bool fDoPP16_32 : 1;
3520	bool fDoPP16_V86 : 1;
3521	bool fDoPP32 : 1;
3522	bool fDoPP32_16 : 1;
3523	bool fDoPPV86 : 1;
3524
3525	bool fDoPAE16 : 1;
3526	bool fDoPAE16_32 : 1;
3527	bool fDoPAE16_V86 : 1;
3528	bool fDoPAE32 : 1;
3529	bool fDoPAE32_16 : 1;
3530	bool fDoPAEV86 : 1;
3531
3532	bool fDoLM16 : 1;
3533	bool fDoLM32 : 1;
3534	bool fDoLM64 : 1;
3535
3536	} BS3TESTMODEBYMAXENTRY;
3537	/** Pointer to a mode-by-max sub-test entry. */
3538	typedef BS3TESTMODEBYMAXENTRY const *PCBS3TESTMODEBYMAXENTRY;
3539
3540	/** @def BS3TESTMODEBYMAXENTRY_CMN
3541	* Produces a BS3TESTMODEBYMAXENTRY initializer for common (c16,c32,c64) test
3542	* functions. */
3543	#define BS3TESTMODEBYMAXENTRY_CMN(a_szTest, a_BaseNm) \
3544	{ /pszSubTest =/ a_szTest, \
3545	/RM/ RT_CONCAT(a_BaseNm, _c16), \
3546	/PE16/ RT_CONCAT(a_BaseNm, _c16), \
3547	/PE16_32/ RT_CONCAT(a_BaseNm, _c32), \
3548	/PE32/ RT_CONCAT(a_BaseNm, _c32), \
3549	/PP16_32/ RT_CONCAT(a_BaseNm, _c32), \
3550	/PP32/ RT_CONCAT(a_BaseNm, _c32), \
3551	/PAE16_32/ RT_CONCAT(a_BaseNm, _c32), \
3552	/PAE32/ RT_CONCAT(a_BaseNm, _c32), \
3553	/LM64/ RT_CONCAT(a_BaseNm, _c64), \
3554	/fDoRM/ true, \
3555	/fDoPE16/ true, \
3556	/fDoPE16_32/ true, \
3557	/fDoPE16_V86/ true, \
3558	/fDoPE32/ true, \
3559	/fDoPE32_16/ true, \
3560	/fDoPEV86/ true, \
3561	/fDoPP16/ true, \
3562	/fDoPP16_32/ true, \
3563	/fDoPP16_V86/ true, \
3564	/fDoPP32/ true, \
3565	/fDoPP32_16/ true, \
3566	/fDoPPV86/ true, \
3567	/fDoPAE16/ true, \
3568	/fDoPAE16_32/ true, \
3569	/fDoPAE16_V86/ true, \
3570	/fDoPAE32/ true, \
3571	/fDoPAE32_16/ true, \
3572	/fDoPAEV86/ true, \
3573	/fDoLM16/ true, \
3574	/fDoLM32/ true, \
3575	/fDoLM64/ true, \
3576	}
3577
3578	/** @def BS3TESTMODEBYMAX_PROTOTYPES_CMN
3579	* A set of standard protypes to go with #BS3TESTMODEBYMAXENTRY_CMN. */
3580	#define BS3TESTMODEBYMAX_PROTOTYPES_CMN(a_BaseNm) \
3581	FNBS3TESTDOMODE /BS3_FAR_CODE/ RT_CONCAT(a_BaseNm, _c16); \
3582	FNBS3TESTDOMODE /BS3_FAR_CODE/ RT_CONCAT(a_BaseNm, _c32); \
3583	FNBS3TESTDOMODE /BS3_FAR_CODE/ RT_CONCAT(a_BaseNm, _c64)
3584
3585
3586	/** @def BS3TESTMODEBYMAXENTRY_MODE
3587	* Produces a BS3TESTMODEBYMAXENTRY initializer for a full set of mode test
3588	* functions. */
3589	#define BS3TESTMODEBYMAXENTRY_MODE(a_szTest, a_BaseNm) \
3590	{ /pszSubTest =/ a_szTest, \
3591	/RM/ RT_CONCAT(a_BaseNm, _rm), \
3592	/PE16/ RT_CONCAT(a_BaseNm, _pe16), \
3593	/PE16_32/ RT_CONCAT(a_BaseNm, _pe16_32), \
3594	/PE32/ RT_CONCAT(a_BaseNm, _pe32), \
3595	/PP16_32/ RT_CONCAT(a_BaseNm, _pp16_32), \
3596	/PP32/ RT_CONCAT(a_BaseNm, _pp32), \
3597	/PAE16_32/ RT_CONCAT(a_BaseNm, _pae16_32), \
3598	/PAE32/ RT_CONCAT(a_BaseNm, _pae32), \
3599	/LM64/ RT_CONCAT(a_BaseNm, _lm64), \
3600	/fDoRM/ true, \
3601	/fDoPE16/ true, \
3602	/fDoPE16_32/ true, \
3603	/fDoPE16_V86/ true, \
3604	/fDoPE32/ true, \
3605	/fDoPE32_16/ true, \
3606	/fDoPEV86/ true, \
3607	/fDoPP16/ true, \
3608	/fDoPP16_32/ true, \
3609	/fDoPP16_V86/ true, \
3610	/fDoPP32/ true, \
3611	/fDoPP32_16/ true, \
3612	/fDoPPV86/ true, \
3613	/fDoPAE16/ true, \
3614	/fDoPAE16_32/ true, \
3615	/fDoPAE16_V86/ true, \
3616	/fDoPAE32/ true, \
3617	/fDoPAE32_16/ true, \
3618	/fDoPAEV86/ true, \
3619	/fDoLM16/ true, \
3620	/fDoLM32/ true, \
3621	/fDoLM64/ true, \
3622	}
3623
3624	/** @def BS3TESTMODEBYMAX_PROTOTYPES_MODE
3625	* A set of standard protypes to go with #BS3TESTMODEBYMAXENTRY_MODE. */
3626	#define BS3TESTMODEBYMAX_PROTOTYPES_MODE(a_BaseNm) \
3627	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _rm); \
3628	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pe16); \
3629	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pe16_32); \
3630	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pe32); \
3631	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pp16_32); \
3632	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pp32); \
3633	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pae16_32); \
3634	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _pae32); \
3635	FNBS3TESTDOMODE RT_CONCAT(a_BaseNm, _lm64)
3636
3637
3638	/**
3639	* One worker drives all modes.
3640	*
3641	* This is an alternative to BS3TESTMODEENTRY where one worker, typically
3642	* 16-bit, does all the test driver work. It's called repeatedly from all
3643	* the modes being tested.
3644	*/
3645	typedef struct BS3TESTMODEBYONEENTRY
3646	{
3647	const char * BS3_FAR pszSubTest;
3648	PFNBS3TESTDOMODE pfnWorker;
3649	/** BS3TESTMODEBYONEENTRY_F_XXX. */
3650	uint32_t fFlags;
3651	} BS3TESTMODEBYONEENTRY;
3652	/** Pointer to a mode-by-one sub-test entry. */
3653	typedef BS3TESTMODEBYONEENTRY const *PCBS3TESTMODEBYONEENTRY;
3654
3655	/** @name BS3TESTMODEBYONEENTRY_F_XXX - flags.
3656	* @{ */
3657	/** Only test modes that has paging enabled. */
3658	#define BS3TESTMODEBYONEENTRY_F_ONLY_PAGING RT_BIT_32(0)
3659	/** @} */
3660
3661
3662	/**
3663	* Sets the full GDTR register.
3664	*
3665	* @param cbLimit The limit.
3666	* @param uBase The base address - 24, 32 or 64 bit depending on the
3667	* CPU mode.
3668	*/
3669	BS3_CMN_PROTO_NOSB(void, Bs3UtilSetFullGdtr,(uint16_t cbLimit, uint64_t uBase));
3670
3671	/**
3672	* Sets the full IDTR register.
3673	*
3674	* @param cbLimit The limit.
3675	* @param uBase The base address - 24, 32 or 64 bit depending on the
3676	* CPU mode.
3677	*/
3678	BS3_CMN_PROTO_NOSB(void, Bs3UtilSetFullIdtr,(uint16_t cbLimit, uint64_t uBase));
3679
3680
3681	/** @} */
3682
3683
3684	/**
3685	* Initializes all of boot sector kit \#3.
3686	*/
3687	BS3_DECL(void) Bs3InitAll_rm(void);
3688
3689	/**
3690	* Initializes the REAL and TILED memory pools.
3691	*
3692	* For proper operation on OLDer CPUs, call #Bs3CpuDetect_mmm first.
3693	*/
3694	BS3_DECL_FAR(void) Bs3InitMemory_rm_far(void);
3695
3696	/**
3697	* Initialized the X0TEXT16 and X1TEXT16 GDT entries.
3698	*/
3699	BS3_DECL_FAR(void) Bs3InitGdt_rm_far(void);
3700
3701
3702
3703	/** @defgroup grp_bs3kit_mode Mode Specific Functions and Data
3704	*
3705	* The mode specific functions come in bit count variations and CPU mode
3706	* variations. The bs3kit-template-header.h/mac defines the BS3_NM macro to
3707	* mangle a function or variable name according to the target CPU mode. In
3708	* non-templated code, it's common to spell the name out in full.
3709	*
3710	* @{
3711	*/
3712
3713
3714	/** @def BS3_MODE_PROTO_INT
3715	* Internal macro for emitting prototypes for mode functions.
3716	*
3717	* @param a_RetType The return type.
3718	* @param a_Name The function basename.
3719	* @param a_Params The parameter list (in parentheses).
3720	* @sa BS3_MODE_PROTO_STUB, BS3_MODE_PROTO_NOSB
3721	*/
3722	#define BS3_MODE_PROTO_INT(a_RetType, a_Name, a_Params) \
3723	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_rm) a_Params; \
3724	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pe16) a_Params; \
3725	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pe16_32) a_Params; \
3726	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pe16_v86) a_Params; \
3727	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pe32) a_Params; \
3728	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pe32_16) a_Params; \
3729	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pev86) a_Params; \
3730	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pp16) a_Params; \
3731	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pp16_32) a_Params; \
3732	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pp16_v86) a_Params; \
3733	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pp32) a_Params; \
3734	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pp32_16) a_Params; \
3735	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_ppv86) a_Params; \
3736	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pae16) a_Params; \
3737	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pae16_32) a_Params; \
3738	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pae16_v86) a_Params; \
3739	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pae32) a_Params; \
3740	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_pae32_16) a_Params; \
3741	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_paev86) a_Params; \
3742	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_lm16) a_Params; \
3743	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_lm32) a_Params; \
3744	BS3_DECL_NEAR(a_RetType) RT_CONCAT(a_Name,_lm64) a_Params; \
3745	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_rm_far) a_Params; \
3746	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_pe16_far) a_Params; \
3747	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_pe16_v86_far) a_Params; \
3748	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_pe32_16_far) a_Params; \
3749	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_pev86_far) a_Params; \
3750	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_pp16_far) a_Params; \
3751	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_pp16_v86_far) a_Params; \
3752	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_pp32_16_far) a_Params; \
3753	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_ppv86_far) a_Params; \
3754	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_pae16_far) a_Params; \
3755	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_pae16_v86_far)a_Params; \
3756	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_pae32_16_far) a_Params; \
3757	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_paev86_far) a_Params; \
3758	BS3_DECL_FAR(a_RetType) RT_CONCAT(a_Name,_lm16_far) a_Params
3759
3760	/** @def BS3_MODE_PROTO_STUB
3761	* Macro for prototyping all the variations of a mod function with automatic
3762	* near -> far stub.
3763	*
3764	* @param a_RetType The return type.
3765	* @param a_Name The function basename.
3766	* @param a_Params The parameter list (in parentheses).
3767	* @sa BS3_MODE_PROTO_STUB, BS3_MODE_PROTO_NOSB
3768	*/
3769	#define BS3_MODE_PROTO_STUB(a_RetType, a_Name, a_Params) BS3_MODE_PROTO_INT(a_RetType, a_Name, a_Params)
3770
3771	/** @def BS3_MODE_PROTO_STUB
3772	* Macro for prototyping all the variations of a mod function without any
3773	* near -> far stub.
3774	*
3775	* @param a_RetType The return type.
3776	* @param a_Name The function basename.
3777	* @param a_Params The parameter list (in parentheses).
3778	* @sa BS3_MODE_PROTO_STUB, BS3_MODE_PROTO_NOSB
3779	*/
3780	#define BS3_MODE_PROTO_NOSB(a_RetType, a_Name, a_Params) BS3_MODE_PROTO_INT(a_RetType, a_Name, a_Params)
3781
3782
3783	/**
3784	* Macro for reducing typing.
3785	*
3786	* Doxygen knows how to expand this, well, kind of.
3787	*
3788	* @remarks Variables instantiated in assembly code should define two labels,
3789	* with and without leading underscore. Variables instantiated from
3790	* C/C++ code doesn't need to as the object file convert does this for
3791	* 64-bit object files.
3792	*/
3793	#define BS3_MODE_EXPAND_EXTERN_DATA16(a_VarType, a_VarName, a_Suffix) \
3794	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_rm) a_Suffix; \
3795	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pe16) a_Suffix; \
3796	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pe16_32) a_Suffix; \
3797	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pe16_v86) a_Suffix; \
3798	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pe32) a_Suffix; \
3799	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pe32_16) a_Suffix; \
3800	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pev86) a_Suffix; \
3801	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pp16) a_Suffix; \
3802	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pp16_32) a_Suffix; \
3803	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pp16_v86) a_Suffix; \
3804	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pp32) a_Suffix; \
3805	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pp32_16) a_Suffix; \
3806	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_ppv86) a_Suffix; \
3807	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pae16) a_Suffix; \
3808	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pae16_32) a_Suffix; \
3809	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pae16_v86)a_Suffix; \
3810	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pae32) a_Suffix; \
3811	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_pae32_16) a_Suffix; \
3812	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_paev86) a_Suffix; \
3813	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_lm16) a_Suffix; \
3814	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_lm32) a_Suffix; \
3815	extern a_VarType BS3_FAR_DATA RT_CONCAT(a_VarName,_lm64) a_Suffix
3816
3817
3818	/** The TMPL_MODE_STR value for each mode.
3819	* These are all in DATA16 so they can be accessed from any code. */
3820	BS3_MODE_EXPAND_EXTERN_DATA16(const char, g_szBs3ModeName, []);
3821	/** The TMPL_MODE_LNAME value for each mode.
3822	* These are all in DATA16 so they can be accessed from any code. */
3823	BS3_MODE_EXPAND_EXTERN_DATA16(const char, g_szBs3ModeNameShortLower, []);
3824
3825
3826	/**
3827	* Basic CPU detection.
3828	*
3829	* This sets the #g_uBs3CpuDetected global variable to the return value.
3830	*
3831	* @returns BS3CPU_XXX value with the BS3CPU_F_CPUID flag set depending on
3832	* capabilities.
3833	*/
3834	BS3_MODE_PROTO_NOSB(uint8_t, Bs3CpuDetect,(void));
3835
3836	/** @name BS3CPU_XXX - CPU detected by BS3CpuDetect_c16() and friends.
3837	* @{ */
3838	#define BS3CPU_8086 UINT16_C(0x0001) /*< Both 8086 and 8088. /
3839	#define BS3CPU_V20 UINT16_C(0x0002) /*< Both NEC V20, V30 and relatives. /
3840	#define BS3CPU_80186 UINT16_C(0x0003) /*< Both 80186 and 80188. /
3841	#define BS3CPU_80286 UINT16_C(0x0004)
3842	#define BS3CPU_80386 UINT16_C(0x0005)
3843	#define BS3CPU_80486 UINT16_C(0x0006)
3844	#define BS3CPU_Pentium UINT16_C(0x0007)
3845	#define BS3CPU_PPro UINT16_C(0x0008)
3846	#define BS3CPU_PProOrNewer UINT16_C(0x0009)
3847	/** CPU type mask. This is a full byte so it's possible to use byte access
3848	* without and AND'ing to get the type value. */
3849	#define BS3CPU_TYPE_MASK UINT16_C(0x00ff)
3850	/** Flag indicating that the CPUID instruction is supported by the CPU. */
3851	#define BS3CPU_F_CPUID UINT16_C(0x0100)
3852	/** Flag indicating that extend CPUID leaves are available (at least two). */
3853	#define BS3CPU_F_CPUID_EXT_LEAVES UINT16_C(0x0200)
3854	/** Flag indicating that the CPU supports PAE. */
3855	#define BS3CPU_F_PAE UINT16_C(0x0400)
3856	/** Flag indicating that the CPU supports the page size extension (4MB pages). */
3857	#define BS3CPU_F_PSE UINT16_C(0x0800)
3858	/** Flag indicating that the CPU supports long mode. */
3859	#define BS3CPU_F_LONG_MODE UINT16_C(0x1000)
3860	/** Flag indicating that the CPU supports NX. */
3861	#define BS3CPU_F_NX UINT16_C(0x2000)
3862	/** @} */
3863
3864	/** The return value of #Bs3CpuDetect_mmm. (Initial value is BS3CPU_TYPE_MASK.) */
3865	extern uint16_t g_uBs3CpuDetected;
3866
3867	/**
3868	* Call 32-bit prot mode C function.
3869	*
3870	* This switches to 32-bit mode and calls the 32-bit @a fpfnCall C code with @a
3871	* cbParams on the stack, then returns in the original mode. When called in
3872	* real mode, this will switch to PE32.
3873	*
3874	* @returns 32-bit status code if the function returned anything.
3875	* @param fpfnCall Address of the 32-bit C function to call. When
3876	* called from 16-bit code, this is a far real mode
3877	* function pointer, i.e. as fixed up by the linker.
3878	* In 32-bit and 64-bit code, this is a flat address.
3879	* @param cbParams The size of the parameter list, in bytes.
3880	* @param ... The parameters.
3881	* @sa Bs3SwitchFromV86To16BitAndCallC
3882	*
3883	* @remarks WARNING! This probably doesn't work in 64-bit mode yet.
3884	* Only tested for 16-bit real mode.
3885	*/
3886	BS3_MODE_PROTO_STUB(int32_t, Bs3SwitchTo32BitAndCallC,(FPFNBS3FAR fpfnCall, unsigned cbParams, ...));
3887
3888	/**
3889	* Initializes trap handling for the current system.
3890	*
3891	* Calls the appropriate Bs3Trap16Init, Bs3Trap32Init or Bs3Trap64Init function.
3892	*/
3893	BS3_MODE_PROTO_STUB(void, Bs3TrapInit,(void));
3894
3895	/**
3896	* Executes the array of tests in every possibly mode.
3897	*
3898	* @param paEntries The mode sub-test entries.
3899	* @param cEntries The number of sub-test entries.
3900	*/
3901	BS3_MODE_PROTO_NOSB(void, Bs3TestDoModes,(PCBS3TESTMODEENTRY paEntries, size_t cEntries));
3902
3903	/**
3904	* Executes the array of tests in every possibly mode, unified driver.
3905	*
3906	* This requires much less code space than Bs3TestDoModes as there is only one
3907	* instace of each sub-test driver code, instead of 3 (cmn) or 22 (per-mode)
3908	* copies.
3909	*
3910	* @param paEntries The mode sub-test-by-one entries.
3911	* @param cEntries The number of sub-test-by-one entries.
3912	* @param fFlags Reserved for the future, MBZ.
3913	*/
3914	BS3_MODE_PROTO_NOSB(void, Bs3TestDoModesByOne,(PCBS3TESTMODEBYONEENTRY paEntries, size_t cEntries, uint32_t fFlags));
3915
3916	/**
3917	* Executes the array of tests in every possibly mode, using the max bit-count
3918	* worker for each.
3919	*
3920	* @param paEntries The mode sub-test entries.
3921	* @param cEntries The number of sub-test entries.
3922	*/
3923	BS3_MODE_PROTO_NOSB(void, Bs3TestDoModesByMax,(PCBS3TESTMODEBYMAXENTRY paEntries, size_t cEntries));
3924
3925
3926	/** @} */
3927
3928	/** @} */
3929
3930	RT_C_DECLS_END
3931
3932
3933	/*
3934	* Include default function symbol mangling.
3935	*/
3936	#include "bs3kit-mangling-code.h"
3937
3938	/*
3939	* Change 16-bit text segment if requested.
3940	*/
3941	#if defined(BS3_USE_ALT_16BIT_TEXT_SEG) && ARCH_BITS == 16 && !defined(BS3_DONT_CHANGE_TEXT_SEG)
3942	# if (defined(BS3_USE_RM_TEXT_SEG) + defined(BS3_USE_X0_TEXT_SEG) + defined(BS3_USE_X1_TEXT_SEG)) != 1
3943	# error "Cannot set more than one alternative 16-bit text segment!"
3944	# elif defined(BS3_USE_RM_TEXT_SEG)
3945	# pragma code_seg("BS3RMTEXT16", "BS3CLASS16RMCODE")
3946	# elif defined(BS3_USE_X0_TEXT_SEG)
3947	# pragma code_seg("BS3X0TEXT16", "BS3CLASS16X0CODE")
3948	# elif defined(BS3_USE_X1_TEXT_SEG)
3949	# pragma code_seg("BS3X1TEXT16", "BS3CLASS16X1CODE")
3950	# else
3951	# error "Huh? Which alternative text segment did you want again?"
3952	# endif
3953	#endif
3954
3955	#endif /* !BS3KIT_INCLUDED_bs3kit_h */
3956

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/ValidationKit/bootsectors/bs3kit/bs3kit.h@ 76776

Download in other formats: