VirtualBox

source: vbox/trunk/src/VBox/ValidationKit/testdriver/vbox.py@ 92236

Last change on this file since 92236 was 92236, checked in by vboxsync, 3 years ago

Validation Kit/testdriver: Removed temporary testbox debugging code which listed the scratch path contents on test failure, which is long overdue.
  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 196.0 KB
Line 
1# -*- coding: utf-8 -*-
2# $Id: vbox.py 92236 2021-11-05 10:36:37Z vboxsync $
3# pylint: disable=too-many-lines
4
5"""
6VirtualBox Specific base testdriver.
7"""
8
9__copyright__ = \
10"""
11Copyright (C) 2010-2020 Oracle Corporation
12
13This file is part of VirtualBox Open Source Edition (OSE), as
14available from http://www.virtualbox.org. This file is free software;
15you can redistribute it and/or modify it under the terms of the GNU
16General Public License (GPL) as published by the Free Software
17Foundation, in version 2 as it comes in the "COPYING" file of the
18VirtualBox OSE distribution. VirtualBox OSE is distributed in the
19hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
20
21The contents of this file may alternatively be used under the terms
22of the Common Development and Distribution License Version 1.0
23(CDDL) only, as it comes in the "COPYING.CDDL" file of the
24VirtualBox OSE distribution, in which case the provisions of the
25CDDL are applicable instead of those of the GPL.
26
27You may elect to license modified versions of this file under the
28terms and conditions of either the GPL or the CDDL or both.
29"""
30__version__ = "$Revision: 92236 $"
31
32# pylint: disable=unnecessary-semicolon
33
34# Standard Python imports.
35import datetime
36import os
37import platform
38import re;
39import sys
40import threading
41import time
42import traceback
43
44# Figure out where the validation kit lives and make sure it's in the path.
45try: __file__
46except: __file__ = sys.argv[0];
47g_ksValidationKitDir = os.path.dirname(os.path.dirname(os.path.abspath(__file__)));
48if g_ksValidationKitDir not in sys.path:
49 sys.path.append(g_ksValidationKitDir);
50
51# Validation Kit imports.
52from common import utils;
53from testdriver import base;
54from testdriver import btresolver;
55from testdriver import reporter;
56from testdriver import vboxcon;
57from testdriver import vboxtestvms;
58
59# Python 3 hacks:
60if sys.version_info[0] >= 3:
61 xrange = range; # pylint: disable=redefined-builtin,invalid-name
62 long = int; # pylint: disable=redefined-builtin,invalid-name
63
64#
65# Exception and Error Unification Hacks.
66# Note! This is pretty gross stuff. Be warned!
67# TODO: Find better ways of doing these things, preferrably in vboxapi.
68#
69
70ComException = None; # pylint: disable=invalid-name
71__fnComExceptionGetAttr__ = None; # pylint: disable=invalid-name
72
73def __MyDefaultGetAttr(oSelf, sName):
74 """ __getattribute__/__getattr__ default fake."""
75 try:
76 oAttr = oSelf.__dict__[sName];
77 except:
78 oAttr = dir(oSelf)[sName];
79 return oAttr;
80
81def __MyComExceptionGetAttr(oSelf, sName):
82 """ ComException.__getattr__ wrapper - both XPCOM and COM. """
83 try:
84 oAttr = __fnComExceptionGetAttr__(oSelf, sName);
85 except AttributeError:
86 if platform.system() == 'Windows':
87 if sName == 'errno':
88 oAttr = __fnComExceptionGetAttr__(oSelf, 'hresult');
89 elif sName == 'msg':
90 oAttr = __fnComExceptionGetAttr__(oSelf, 'strerror');
91 else:
92 raise;
93 else:
94 if sName == 'hresult':
95 oAttr = __fnComExceptionGetAttr__(oSelf, 'errno');
96 elif sName == 'strerror':
97 oAttr = __fnComExceptionGetAttr__(oSelf, 'msg');
98 elif sName == 'excepinfo':
99 oAttr = None;
100 elif sName == 'argerror':
101 oAttr = None;
102 else:
103 raise;
104 #print '__MyComExceptionGetAttr(,%s) -> "%s"' % (sName, oAttr);
105 return oAttr;
106
107def __deployExceptionHacks__(oNativeComExceptionClass):
108 """
109 Deploys the exception and error hacks that helps unifying COM and XPCOM
110 exceptions and errors.
111 """
112 global ComException # pylint: disable=invalid-name
113 global __fnComExceptionGetAttr__ # pylint: disable=invalid-name
114
115 # Hook up our attribute getter for the exception class (ASSUMES new-style).
116 if __fnComExceptionGetAttr__ is None:
117 try:
118 __fnComExceptionGetAttr__ = getattr(oNativeComExceptionClass, '__getattr__');
119 except:
120 try:
121 __fnComExceptionGetAttr__ = getattr(oNativeComExceptionClass, '__getattribute__');
122 except:
123 __fnComExceptionGetAttr__ = __MyDefaultGetAttr;
124 setattr(oNativeComExceptionClass, '__getattr__', __MyComExceptionGetAttr)
125
126 # Make the modified classes accessible (are there better ways to do this?)
127 ComException = oNativeComExceptionClass
128 return None;
129
130
131
132#
133# Utility functions.
134#
135
136def isIpAddrValid(sIpAddr):
137 """
138 Checks if a IPv4 address looks valid. This will return false for
139 localhost and similar.
140 Returns True / False.
141 """
142 if sIpAddr is None: return False;
143 if len(sIpAddr.split('.')) != 4: return False;
144 if sIpAddr.endswith('.0'): return False;
145 if sIpAddr.endswith('.255'): return False;
146 if sIpAddr.startswith('127.'): return False;
147 if sIpAddr.startswith('169.254.'): return False;
148 if sIpAddr.startswith('192.0.2.'): return False;
149 if sIpAddr.startswith('224.0.0.'): return False;
150 return True;
151
152def stringifyErrorInfo(oErrInfo):
153 """
154 Stringifies the error information in a IVirtualBoxErrorInfo object.
155
156 Returns string with error info.
157 """
158 try:
159 rc = oErrInfo.resultCode;
160 sText = oErrInfo.text;
161 sIid = oErrInfo.interfaceID;
162 sComponent = oErrInfo.component;
163 except:
164 sRet = 'bad error object (%s)?' % (oErrInfo,);
165 traceback.print_exc();
166 else:
167 sRet = 'rc=%s text="%s" IID=%s component=%s' % (ComError.toString(rc), sText, sIid, sComponent);
168 return sRet;
169
170def reportError(oErr, sText):
171 """
172 Report a VirtualBox error on oErr. oErr can be IVirtualBoxErrorInfo
173 or IProgress. Anything else is ignored.
174
175 Returns the same a reporter.error().
176 """
177 try:
178 oErrObj = oErr.errorInfo; # IProgress.
179 except:
180 oErrObj = oErr;
181 reporter.error(sText);
182 return reporter.error(stringifyErrorInfo(oErrObj));
183
184def formatComOrXpComException(oType, oXcpt):
185 """
186 Callback installed with the reporter to better format COM exceptions.
187 Similar to format_exception_only, only it returns None if not interested.
188 """
189 _ = oType;
190 oVBoxMgr = vboxcon.goHackModuleClass.oVBoxMgr;
191 if oVBoxMgr is None:
192 return None;
193 if not oVBoxMgr.xcptIsOurXcptKind(oXcpt): # pylint: disable=not-callable
194 return None;
195
196 if platform.system() == 'Windows':
197 hrc = oXcpt.hresult;
198 if hrc == ComError.DISP_E_EXCEPTION and oXcpt.excepinfo is not None and len(oXcpt.excepinfo) > 5:
199 hrc = oXcpt.excepinfo[5];
200 sWhere = oXcpt.excepinfo[1];
201 sMsg = oXcpt.excepinfo[2];
202 else:
203 sWhere = None;
204 sMsg = oXcpt.strerror;
205 else:
206 hrc = oXcpt.errno;
207 sWhere = None;
208 sMsg = oXcpt.msg;
209
210 sHrc = oVBoxMgr.xcptToString(hrc); # pylint: disable=not-callable
211 if sHrc.find('(') < 0:
212 sHrc = '%s (%#x)' % (sHrc, hrc & 0xffffffff,);
213
214 asRet = ['COM-Xcpt: %s' % (sHrc,)];
215 if sMsg and sWhere:
216 asRet.append('--------- %s: %s' % (sWhere, sMsg,));
217 elif sMsg:
218 asRet.append('--------- %s' % (sMsg,));
219 return asRet;
220 #if sMsg and sWhere:
221 # return ['COM-Xcpt: %s - %s: %s' % (sHrc, sWhere, sMsg,)];
222 #if sMsg:
223 # return ['COM-Xcpt: %s - %s' % (sHrc, sMsg,)];
224 #return ['COM-Xcpt: %s' % (sHrc,)];
225
226#
227# Classes
228#
229
230class ComError(object):
231 """
232 Unified COM and XPCOM status code repository.
233 This works more like a module than a class since it's replacing a module.
234 """
235
236 # The VBOX_E_XXX bits:
237 __VBOX_E_BASE = -2135228416;
238 VBOX_E_OBJECT_NOT_FOUND = __VBOX_E_BASE + 1;
239 VBOX_E_INVALID_VM_STATE = __VBOX_E_BASE + 2;
240 VBOX_E_VM_ERROR = __VBOX_E_BASE + 3;
241 VBOX_E_FILE_ERROR = __VBOX_E_BASE + 4;
242 VBOX_E_IPRT_ERROR = __VBOX_E_BASE + 5;
243 VBOX_E_PDM_ERROR = __VBOX_E_BASE + 6;
244 VBOX_E_INVALID_OBJECT_STATE = __VBOX_E_BASE + 7;
245 VBOX_E_HOST_ERROR = __VBOX_E_BASE + 8;
246 VBOX_E_NOT_SUPPORTED = __VBOX_E_BASE + 9;
247 VBOX_E_XML_ERROR = __VBOX_E_BASE + 10;
248 VBOX_E_INVALID_SESSION_STATE = __VBOX_E_BASE + 11;
249 VBOX_E_OBJECT_IN_USE = __VBOX_E_BASE + 12;
250 VBOX_E_DONT_CALL_AGAIN = __VBOX_E_BASE + 13;
251
252 # Reverse lookup table.
253 dDecimalToConst = {}; # pylint: disable=invalid-name
254
255 def __init__(self):
256 raise base.GenError('No instances, please');
257
258 @staticmethod
259 def copyErrors(oNativeComErrorClass):
260 """
261 Copy all error codes from oNativeComErrorClass to this class and
262 install compatability mappings.
263 """
264
265 # First, add the VBOX_E_XXX constants to dDecimalToConst.
266 for sAttr in dir(ComError):
267 if sAttr.startswith('VBOX_E'):
268 oAttr = getattr(ComError, sAttr);
269 ComError.dDecimalToConst[oAttr] = sAttr;
270
271 # Copy all error codes from oNativeComErrorClass to this class.
272 for sAttr in dir(oNativeComErrorClass):
273 if sAttr[0].isupper():
274 oAttr = getattr(oNativeComErrorClass, sAttr);
275 setattr(ComError, sAttr, oAttr);
276 if isinstance(oAttr, int):
277 ComError.dDecimalToConst[oAttr] = sAttr;
278
279 # Install mappings to the other platform.
280 if platform.system() == 'Windows':
281 ComError.NS_OK = ComError.S_OK;
282 ComError.NS_ERROR_FAILURE = ComError.E_FAIL;
283 ComError.NS_ERROR_ABORT = ComError.E_ABORT;
284 ComError.NS_ERROR_NULL_POINTER = ComError.E_POINTER;
285 ComError.NS_ERROR_NO_INTERFACE = ComError.E_NOINTERFACE;
286 ComError.NS_ERROR_INVALID_ARG = ComError.E_INVALIDARG;
287 ComError.NS_ERROR_OUT_OF_MEMORY = ComError.E_OUTOFMEMORY;
288 ComError.NS_ERROR_NOT_IMPLEMENTED = ComError.E_NOTIMPL;
289 ComError.NS_ERROR_UNEXPECTED = ComError.E_UNEXPECTED;
290 else:
291 ComError.E_ACCESSDENIED = -2147024891; # see VBox/com/defs.h
292 ComError.S_OK = ComError.NS_OK;
293 ComError.E_FAIL = ComError.NS_ERROR_FAILURE;
294 ComError.E_ABORT = ComError.NS_ERROR_ABORT;
295 ComError.E_POINTER = ComError.NS_ERROR_NULL_POINTER;
296 ComError.E_NOINTERFACE = ComError.NS_ERROR_NO_INTERFACE;
297 ComError.E_INVALIDARG = ComError.NS_ERROR_INVALID_ARG;
298 ComError.E_OUTOFMEMORY = ComError.NS_ERROR_OUT_OF_MEMORY;
299 ComError.E_NOTIMPL = ComError.NS_ERROR_NOT_IMPLEMENTED;
300 ComError.E_UNEXPECTED = ComError.NS_ERROR_UNEXPECTED;
301 ComError.DISP_E_EXCEPTION = -2147352567; # For COM compatability only.
302 return True;
303
304 @staticmethod
305 def getXcptResult(oXcpt):
306 """
307 Gets the result code for an exception.
308 Returns COM status code (or E_UNEXPECTED).
309 """
310 if platform.system() == 'Windows':
311 # The DISP_E_EXCEPTION + excptinfo fun needs checking up, only
312 # empirical info on it so far.
313 try:
314 hrXcpt = oXcpt.hresult;
315 except AttributeError:
316 hrXcpt = ComError.E_UNEXPECTED;
317 if hrXcpt == ComError.DISP_E_EXCEPTION and oXcpt.excepinfo is not None:
318 hrXcpt = oXcpt.excepinfo[5];
319 else:
320 try:
321 hrXcpt = oXcpt.errno;
322 except AttributeError:
323 hrXcpt = ComError.E_UNEXPECTED;
324 return hrXcpt;
325
326 @staticmethod
327 def equal(oXcpt, hr):
328 """
329 Checks if the ComException e is not equal to the COM status code hr.
330 This takes DISP_E_EXCEPTION & excepinfo into account.
331
332 This method can be used with any Exception derivate, however it will
333 only return True for classes similar to the two ComException variants.
334 """
335 if platform.system() == 'Windows':
336 # The DISP_E_EXCEPTION + excptinfo fun needs checking up, only
337 # empirical info on it so far.
338 try:
339 hrXcpt = oXcpt.hresult;
340 except AttributeError:
341 return False;
342 if hrXcpt == ComError.DISP_E_EXCEPTION and oXcpt.excepinfo is not None:
343 hrXcpt = oXcpt.excepinfo[5];
344 else:
345 try:
346 hrXcpt = oXcpt.errno;
347 except AttributeError:
348 return False;
349 return hrXcpt == hr;
350
351 @staticmethod
352 def notEqual(oXcpt, hr):
353 """
354 Checks if the ComException e is not equal to the COM status code hr.
355 See equal() for more details.
356 """
357 return not ComError.equal(oXcpt, hr)
358
359 @staticmethod
360 def toString(hr):
361 """
362 Converts the specified COM status code to a string.
363 """
364 try:
365 sStr = ComError.dDecimalToConst[int(hr)];
366 except KeyError:
367 hrLong = long(hr);
368 sStr = '%#x (%d)' % (hrLong, hrLong);
369 return sStr;
370
371
372class Build(object): # pylint: disable=too-few-public-methods
373 """
374 A VirtualBox build.
375
376 Note! After dropping the installation of VBox from this code and instead
377 realizing that with the vboxinstall.py wrapper driver, this class is
378 of much less importance and contains unnecessary bits and pieces.
379 """
380
381 def __init__(self, oDriver, strInstallPath):
382 """
383 Construct a build object from a build file name and/or install path.
384 """
385 # Initialize all members first.
386 self.oDriver = oDriver;
387 self.sInstallPath = strInstallPath;
388 self.sSdkPath = None;
389 self.sSrcRoot = None;
390 self.sKind = None;
391 self.sDesignation = None;
392 self.sType = None;
393 self.sOs = None;
394 self.sArch = None;
395 self.sGuestAdditionsIso = None;
396
397 # Figure out the values as best we can.
398 if strInstallPath is None:
399 #
400 # Both parameters are None, which means we're falling back on a
401 # build in the development tree.
402 #
403 self.sKind = "development";
404
405 if self.sType is None:
406 self.sType = os.environ.get("KBUILD_TYPE", "release");
407 if self.sOs is None:
408 self.sOs = os.environ.get("KBUILD_TARGET", oDriver.sHost);
409 if self.sArch is None:
410 self.sArch = os.environ.get("KBUILD_TARGET_ARCH", oDriver.sHostArch);
411
412 sOut = os.path.join('out', self.sOs + '.' + self.sArch, self.sType);
413 sSearch = os.environ.get('VBOX_TD_DEV_TREE', os.path.dirname(__file__)); # Env.var. for older trees or testboxscript.
414 sCandidat = None;
415 for i in range(0, 10): # pylint: disable=unused-variable
416 sBldDir = os.path.join(sSearch, sOut);
417 if os.path.isdir(sBldDir):
418 sCandidat = os.path.join(sBldDir, 'bin', 'VBoxSVC' + base.exeSuff());
419 if os.path.isfile(sCandidat):
420 self.sSdkPath = os.path.join(sBldDir, 'bin/sdk');
421 break;
422 sCandidat = os.path.join(sBldDir, 'dist/VirtualBox.app/Contents/MacOS/VBoxSVC');
423 if os.path.isfile(sCandidat):
424 self.sSdkPath = os.path.join(sBldDir, 'dist/sdk');
425 break;
426 sSearch = os.path.abspath(os.path.join(sSearch, '..'));
427 if sCandidat is None or not os.path.isfile(sCandidat):
428 raise base.GenError();
429 self.sInstallPath = os.path.abspath(os.path.dirname(sCandidat));
430 self.sSrcRoot = os.path.abspath(sSearch);
431
432 self.sDesignation = os.environ.get('TEST_BUILD_DESIGNATION', None);
433 if self.sDesignation is None:
434 try:
435 oFile = utils.openNoInherit(os.path.join(self.sSrcRoot, sOut, 'revision.kmk'), 'r');
436 except:
437 pass;
438 else:
439 s = oFile.readline();
440 oFile.close();
441 oMatch = re.search("VBOX_SVN_REV=(\\d+)", s);
442 if oMatch is not None:
443 self.sDesignation = oMatch.group(1);
444
445 if self.sDesignation is None:
446 self.sDesignation = 'XXXXX'
447 else:
448 #
449 # We've been pointed to an existing installation, this could be
450 # in the out dir of a svn checkout, untarred VBoxAll or a real
451 # installation directory.
452 #
453 self.sKind = "preinstalled";
454 self.sType = "release";
455 self.sOs = oDriver.sHost;
456 self.sArch = oDriver.sHostArch;
457 self.sInstallPath = os.path.abspath(strInstallPath);
458 self.sSdkPath = os.path.join(self.sInstallPath, 'sdk');
459 self.sSrcRoot = None;
460 self.sDesignation = os.environ.get('TEST_BUILD_DESIGNATION', 'XXXXX');
461 ## @todo Much more work is required here.
462
463 # Try Determine the build type.
464 sVBoxManage = os.path.join(self.sInstallPath, 'VBoxManage' + base.exeSuff());
465 if os.path.isfile(sVBoxManage):
466 try:
467 (iExit, sStdOut, _) = utils.processOutputUnchecked([sVBoxManage, '--dump-build-type']);
468 sStdOut = sStdOut.strip();
469 if iExit == 0 and sStdOut in ('release', 'debug', 'strict', 'dbgopt', 'asan'):
470 self.sType = sStdOut;
471 reporter.log('Build: Detected build type: %s' % (self.sType));
472 else:
473 reporter.log('Build: --dump-build-type -> iExit=%u sStdOut=%s' % (iExit, sStdOut,));
474 except:
475 reporter.logXcpt('Build: Running "%s --dump-build-type" failed!' % (sVBoxManage,));
476 else:
477 reporter.log3('Build: sVBoxManage=%s not found' % (sVBoxManage,));
478
479 # Do some checks.
480 sVMMR0 = os.path.join(self.sInstallPath, 'VMMR0.r0');
481 if not os.path.isfile(sVMMR0) and utils.getHostOs() == 'solaris': # solaris is special.
482 sVMMR0 = os.path.join(self.sInstallPath, 'amd64' if utils.getHostArch() == 'amd64' else 'i386', 'VMMR0.r0');
483 if not os.path.isfile(sVMMR0):
484 raise base.GenError('%s is missing' % (sVMMR0,));
485
486 # Guest additions location is different on windows for some _stupid_ reason.
487 if self.sOs == 'win' and self.sKind != 'development':
488 self.sGuestAdditionsIso = '%s/VBoxGuestAdditions.iso' % (self.sInstallPath,);
489 elif self.sOs == 'darwin':
490 self.sGuestAdditionsIso = '%s/VBoxGuestAdditions.iso' % (self.sInstallPath,);
491 elif self.sOs == 'solaris':
492 self.sGuestAdditionsIso = '%s/VBoxGuestAdditions.iso' % (self.sInstallPath,);
493 else:
494 self.sGuestAdditionsIso = '%s/additions/VBoxGuestAdditions.iso' % (self.sInstallPath,);
495
496 # __init__ end;
497
498 def isDevBuild(self):
499 """ Returns True if it's development build (kind), otherwise False. """
500 return self.sKind == 'development';
501
502
503class EventHandlerBase(object):
504 """
505 Base class for both Console and VirtualBox event handlers.
506 """
507
508 def __init__(self, dArgs, fpApiVer, sName = None):
509 self.oVBoxMgr = dArgs['oVBoxMgr'];
510 self.oEventSrc = dArgs['oEventSrc']; # Console/VirtualBox for < 3.3
511 self.oListener = dArgs['oListener'];
512 self.fPassive = self.oListener is not None;
513 self.sName = sName
514 self.fShutdown = False;
515 self.oThread = None;
516 self.fpApiVer = fpApiVer;
517 self.dEventNo2Name = {};
518 for sKey, iValue in self.oVBoxMgr.constants.all_values('VBoxEventType').items():
519 self.dEventNo2Name[iValue] = sKey;
520
521 def threadForPassiveMode(self):
522 """
523 The thread procedure for the event processing thread.
524 """
525 assert self.fPassive is not None;
526 while not self.fShutdown:
527 try:
528 oEvt = self.oEventSrc.getEvent(self.oListener, 500);
529 except:
530 if not self.oVBoxMgr.xcptIsDeadInterface(): reporter.logXcpt();
531 else: reporter.log('threadForPassiveMode/%s: interface croaked (ignored)' % (self.sName,));
532 break;
533 if oEvt:
534 self.handleEvent(oEvt);
535 if not self.fShutdown:
536 try:
537 self.oEventSrc.eventProcessed(self.oListener, oEvt);
538 except:
539 reporter.logXcpt();
540 break;
541 self.unregister(fWaitForThread = False);
542 return None;
543
544 def startThreadForPassiveMode(self):
545 """
546 Called when working in passive mode.
547 """
548 self.oThread = threading.Thread(target = self.threadForPassiveMode, \
549 args=(), name=('PAS-%s' % (self.sName,)));
550 self.oThread.setDaemon(True)
551 self.oThread.start();
552 return None;
553
554 def unregister(self, fWaitForThread = True):
555 """
556 Unregister the event handler.
557 """
558 fRc = False;
559 if not self.fShutdown:
560 self.fShutdown = True;
561
562 if self.oEventSrc is not None:
563 if self.fpApiVer < 3.3:
564 try:
565 self.oEventSrc.unregisterCallback(self.oListener);
566 fRc = True;
567 except:
568 reporter.errorXcpt('unregisterCallback failed on %s' % (self.oListener,));
569 else:
570 try:
571 self.oEventSrc.unregisterListener(self.oListener);
572 fRc = True;
573 except:
574 if self.oVBoxMgr.xcptIsDeadInterface():
575 reporter.log('unregisterListener failed on %s because of dead interface (%s)'
576 % (self.oListener, self.oVBoxMgr.xcptToString(),));
577 else:
578 reporter.errorXcpt('unregisterListener failed on %s' % (self.oListener,));
579
580 if self.oThread is not None \
581 and self.oThread != threading.current_thread():
582 self.oThread.join();
583 self.oThread = None;
584
585 _ = fWaitForThread;
586 return fRc;
587
588 def handleEvent(self, oEvt):
589 """
590 Compatibility wrapper that child classes implement.
591 """
592 _ = oEvt;
593 return None;
594
595 @staticmethod
596 def registerDerivedEventHandler(oVBoxMgr, fpApiVer, oSubClass, dArgsCopy, # pylint: disable=too-many-arguments
597 oSrcParent, sSrcParentNm, sICallbackNm,
598 fMustSucceed = True, sLogSuffix = '', aenmEvents = None):
599 """
600 Registers the callback / event listener.
601 """
602 dArgsCopy['oVBoxMgr'] = oVBoxMgr;
603 dArgsCopy['oListener'] = None;
604 if fpApiVer < 3.3:
605 dArgsCopy['oEventSrc'] = oSrcParent;
606 try:
607 oRet = oVBoxMgr.createCallback(sICallbackNm, oSubClass, dArgsCopy);
608 except:
609 reporter.errorXcpt('%s::registerCallback(%s) failed%s' % (sSrcParentNm, oRet, sLogSuffix));
610 else:
611 try:
612 oSrcParent.registerCallback(oRet);
613 return oRet;
614 except Exception as oXcpt:
615 if fMustSucceed or ComError.notEqual(oXcpt, ComError.E_UNEXPECTED):
616 reporter.errorXcpt('%s::registerCallback(%s)%s' % (sSrcParentNm, oRet, sLogSuffix));
617 else:
618 #
619 # Scalable event handling introduced in VBox 4.0.
620 #
621 fPassive = sys.platform == 'win32'; # or webservices.
622
623 if not aenmEvents:
624 aenmEvents = (vboxcon.VBoxEventType_Any,);
625
626 try:
627 oEventSrc = oSrcParent.eventSource;
628 dArgsCopy['oEventSrc'] = oEventSrc;
629 if not fPassive:
630 oListener = oRet = oVBoxMgr.createListener(oSubClass, dArgsCopy);
631 else:
632 oListener = oEventSrc.createListener();
633 dArgsCopy['oListener'] = oListener;
634 oRet = oSubClass(dArgsCopy);
635 except:
636 reporter.errorXcpt('%s::eventSource.createListener(%s) failed%s' % (sSrcParentNm, oListener, sLogSuffix));
637 else:
638 try:
639 oEventSrc.registerListener(oListener, aenmEvents, not fPassive);
640 except Exception as oXcpt:
641 if fMustSucceed or ComError.notEqual(oXcpt, ComError.E_UNEXPECTED):
642 reporter.errorXcpt('%s::eventSource.registerListener(%s) failed%s'
643 % (sSrcParentNm, oListener, sLogSuffix));
644 else:
645 if not fPassive:
646 if sys.platform == 'win32':
647 from win32com.server.util import unwrap # pylint: disable=import-error
648 oRet = unwrap(oRet);
649 oRet.oListener = oListener;
650 else:
651 oRet.startThreadForPassiveMode();
652 return oRet;
653 return None;
654
655
656
657
658class ConsoleEventHandlerBase(EventHandlerBase):
659 """
660 Base class for handling IConsole events.
661
662 The class has IConsoleCallback (<=3.2) compatible callback methods which
663 the user can override as needed.
664
665 Note! This class must not inherit from object or we'll get type errors in VBoxPython.
666 """
667 def __init__(self, dArgs, sName = None):
668 self.oSession = dArgs['oSession'];
669 self.oConsole = dArgs['oConsole'];
670 if sName is None:
671 sName = self.oSession.sName;
672 EventHandlerBase.__init__(self, dArgs, self.oSession.fpApiVer, sName);
673
674
675 # pylint: disable=missing-docstring,too-many-arguments,unused-argument
676 def onMousePointerShapeChange(self, fVisible, fAlpha, xHot, yHot, cx, cy, abShape):
677 reporter.log2('onMousePointerShapeChange/%s' % (self.sName));
678 def onMouseCapabilityChange(self, fSupportsAbsolute, *aArgs): # Extra argument was added in 3.2.
679 reporter.log2('onMouseCapabilityChange/%s' % (self.sName));
680 def onKeyboardLedsChange(self, fNumLock, fCapsLock, fScrollLock):
681 reporter.log2('onKeyboardLedsChange/%s' % (self.sName));
682 def onStateChange(self, eState):
683 reporter.log2('onStateChange/%s' % (self.sName));
684 def onAdditionsStateChange(self):
685 reporter.log2('onAdditionsStateChange/%s' % (self.sName));
686 def onNetworkAdapterChange(self, oNic):
687 reporter.log2('onNetworkAdapterChange/%s' % (self.sName));
688 def onSerialPortChange(self, oPort):
689 reporter.log2('onSerialPortChange/%s' % (self.sName));
690 def onParallelPortChange(self, oPort):
691 reporter.log2('onParallelPortChange/%s' % (self.sName));
692 def onStorageControllerChange(self):
693 reporter.log2('onStorageControllerChange/%s' % (self.sName));
694 def onMediumChange(self, attachment):
695 reporter.log2('onMediumChange/%s' % (self.sName));
696 def onCPUChange(self, iCpu, fAdd):
697 reporter.log2('onCPUChange/%s' % (self.sName));
698 def onVRDPServerChange(self):
699 reporter.log2('onVRDPServerChange/%s' % (self.sName));
700 def onRemoteDisplayInfoChange(self):
701 reporter.log2('onRemoteDisplayInfoChange/%s' % (self.sName));
702 def onUSBControllerChange(self):
703 reporter.log2('onUSBControllerChange/%s' % (self.sName));
704 def onUSBDeviceStateChange(self, oDevice, fAttached, oError):
705 reporter.log2('onUSBDeviceStateChange/%s' % (self.sName));
706 def onSharedFolderChange(self, fGlobal):
707 reporter.log2('onSharedFolderChange/%s' % (self.sName));
708 def onRuntimeError(self, fFatal, sErrId, sMessage):
709 reporter.log2('onRuntimeError/%s' % (self.sName));
710 def onCanShowWindow(self):
711 reporter.log2('onCanShowWindow/%s' % (self.sName));
712 return True
713 def onShowWindow(self):
714 reporter.log2('onShowWindow/%s' % (self.sName));
715 return None;
716 # pylint: enable=missing-docstring,too-many-arguments,unused-argument
717
718 def handleEvent(self, oEvt):
719 """
720 Compatibility wrapper.
721 """
722 try:
723 oEvtBase = self.oVBoxMgr.queryInterface(oEvt, 'IEvent');
724 eType = oEvtBase.type;
725 except:
726 reporter.logXcpt();
727 return None;
728 if eType == vboxcon.VBoxEventType_OnRuntimeError:
729 try:
730 oEvtIt = self.oVBoxMgr.queryInterface(oEvtBase, 'IRuntimeErrorEvent');
731 return self.onRuntimeError(oEvtIt.fatal, oEvtIt.id, oEvtIt.message)
732 except:
733 reporter.logXcpt();
734 ## @todo implement the other events.
735 try:
736 if eType not in (vboxcon.VBoxEventType_OnMousePointerShapeChanged,
737 vboxcon.VBoxEventType_OnCursorPositionChanged):
738 if eType in self.dEventNo2Name:
739 reporter.log2('%s(%s)/%s' % (self.dEventNo2Name[eType], str(eType), self.sName));
740 else:
741 reporter.log2('%s/%s' % (str(eType), self.sName));
742 except AttributeError: # Handle older VBox versions which don't have a specific event.
743 pass;
744 return None;
745
746
747class VirtualBoxEventHandlerBase(EventHandlerBase):
748 """
749 Base class for handling IVirtualBox events.
750
751 The class has IConsoleCallback (<=3.2) compatible callback methods which
752 the user can override as needed.
753
754 Note! This class must not inherit from object or we'll get type errors in VBoxPython.
755 """
756 def __init__(self, dArgs, sName = "emanon"):
757 self.oVBoxMgr = dArgs['oVBoxMgr'];
758 self.oVBox = dArgs['oVBox'];
759 EventHandlerBase.__init__(self, dArgs, self.oVBox.fpApiVer, sName);
760
761 # pylint: disable=missing-docstring,unused-argument
762 def onMachineStateChange(self, sMachineId, eState):
763 pass;
764 def onMachineDataChange(self, sMachineId):
765 pass;
766 def onExtraDataCanChange(self, sMachineId, sKey, sValue):
767 # The COM bridge does tuples differently. Not very funny if you ask me... ;-)
768 if self.oVBoxMgr.type == 'MSCOM':
769 return '', 0, True;
770 return True, ''
771 def onExtraDataChange(self, sMachineId, sKey, sValue):
772 pass;
773 def onMediumRegistered(self, sMediumId, eMediumType, fRegistered):
774 pass;
775 def onMachineRegistered(self, sMachineId, fRegistered):
776 pass;
777 def onSessionStateChange(self, sMachineId, eState):
778 pass;
779 def onSnapshotTaken(self, sMachineId, sSnapshotId):
780 pass;
781 def onSnapshotDiscarded(self, sMachineId, sSnapshotId):
782 pass;
783 def onSnapshotChange(self, sMachineId, sSnapshotId):
784 pass;
785 def onGuestPropertyChange(self, sMachineId, sName, sValue, sFlags):
786 pass;
787 # pylint: enable=missing-docstring,unused-argument
788
789 def handleEvent(self, oEvt):
790 """
791 Compatibility wrapper.
792 """
793 try:
794 oEvtBase = self.oVBoxMgr.queryInterface(oEvt, 'IEvent');
795 eType = oEvtBase.type;
796 except:
797 reporter.logXcpt();
798 return None;
799 if eType == vboxcon.VBoxEventType_OnMachineStateChanged:
800 try:
801 oEvtIt = self.oVBoxMgr.queryInterface(oEvtBase, 'IMachineStateChangedEvent');
802 return self.onMachineStateChange(oEvtIt.machineId, oEvtIt.state)
803 except:
804 reporter.logXcpt();
805 elif eType == vboxcon.VBoxEventType_OnGuestPropertyChanged:
806 try:
807 oEvtIt = self.oVBoxMgr.queryInterface(oEvtBase, 'IGuestPropertyChangedEvent');
808 return self.onGuestPropertyChange(oEvtIt.machineId, oEvtIt.name, oEvtIt.value, oEvtIt.flags);
809 except:
810 reporter.logXcpt();
811 ## @todo implement the other events.
812 if eType in self.dEventNo2Name:
813 reporter.log2('%s(%s)/%s' % (self.dEventNo2Name[eType], str(eType), self.sName));
814 else:
815 reporter.log2('%s/%s' % (str(eType), self.sName));
816 return None;
817
818
819class SessionConsoleEventHandler(ConsoleEventHandlerBase):
820 """
821 For catching machine state changes and waking up the task machinery at that point.
822 """
823 def __init__(self, dArgs):
824 ConsoleEventHandlerBase.__init__(self, dArgs);
825
826 def onMachineStateChange(self, sMachineId, eState): # pylint: disable=unused-argument
827 """ Just interrupt the wait loop here so it can check again. """
828 _ = sMachineId; _ = eState;
829 self.oVBoxMgr.interruptWaitEvents();
830
831 def onRuntimeError(self, fFatal, sErrId, sMessage):
832 reporter.log('onRuntimeError/%s: fFatal=%d sErrId=%s sMessage=%s' % (self.sName, fFatal, sErrId, sMessage));
833 oSession = self.oSession;
834 if oSession is not None: # paranoia
835 if sErrId == 'HostMemoryLow':
836 oSession.signalHostMemoryLow();
837 if sys.platform == 'win32':
838 from testdriver import winbase;
839 winbase.logMemoryStats();
840 oSession.signalTask();
841 self.oVBoxMgr.interruptWaitEvents();
842
843
844
845class TestDriver(base.TestDriver): # pylint: disable=too-many-instance-attributes
846 """
847 This is the VirtualBox test driver.
848 """
849
850 def __init__(self):
851 base.TestDriver.__init__(self);
852 self.fImportedVBoxApi = False;
853 self.fpApiVer = 3.2;
854 self.uRevision = 0;
855 self.uApiRevision = 0;
856 self.oBuild = None;
857 self.oVBoxMgr = None;
858 self.oVBox = None;
859 self.aoRemoteSessions = [];
860 self.aoVMs = []; ## @todo not sure if this list will be of any use.
861 self.oTestVmManager = vboxtestvms.TestVmManager(self.sResourcePath);
862 self.oTestVmSet = vboxtestvms.TestVmSet();
863 self.sSessionTypeDef = 'headless';
864 self.sSessionType = self.sSessionTypeDef;
865 self.fEnableVrdp = True;
866 self.uVrdpBasePortDef = 6000;
867 self.uVrdpBasePort = self.uVrdpBasePortDef;
868 self.sDefBridgedNic = None;
869 self.fUseDefaultSvc = False;
870 self.sLogSelfGroups = '';
871 self.sLogSelfFlags = 'time';
872 self.sLogSelfDest = '';
873 self.sLogSessionGroups = '';
874 self.sLogSessionFlags = 'time';
875 self.sLogSessionDest = '';
876 self.sLogSvcGroups = '';
877 self.sLogSvcFlags = 'time';
878 self.sLogSvcDest = '';
879 self.sSelfLogFile = None;
880 self.sVBoxSvcLogFile = None;
881 self.oVBoxSvcProcess = None;
882 self.sVBoxSvcPidFile = None;
883 self.fVBoxSvcInDebugger = False;
884 self.fVBoxSvcWaitForDebugger = False;
885 self.sVBoxValidationKit = None;
886 self.sVBoxValidationKitIso = None;
887 self.sVBoxBootSectors = None;
888 self.fAlwaysUploadLogs = False;
889 self.fAlwaysUploadScreenshots = False;
890 self.fEnableDebugger = True;
891
892 # Drop LD_PRELOAD and enable memory leak detection in LSAN_OPTIONS from vboxinstall.py
893 # before doing build detection. This is a little crude and inflexible...
894 if 'LD_PRELOAD' in os.environ:
895 del os.environ['LD_PRELOAD'];
896 if 'LSAN_OPTIONS' in os.environ:
897 asLSanOptions = os.environ['LSAN_OPTIONS'].split(':');
898 try: asLSanOptions.remove('detect_leaks=0');
899 except: pass;
900 if asLSanOptions: os.environ['LSAN_OPTIONS'] = ':'.join(asLSanOptions);
901 else: del os.environ['LSAN_OPTIONS'];
902
903 # Quietly detect build and validation kit.
904 self._detectBuild(False);
905 self._detectValidationKit(False);
906
907 # Make sure all debug logs goes to the scratch area unless
908 # specified otherwise (more of this later on).
909 if 'VBOX_LOG_DEST' not in os.environ:
910 os.environ['VBOX_LOG_DEST'] = 'nodeny dir=%s' % (self.sScratchPath);
911
912
913 def _detectBuild(self, fQuiet = False):
914 """
915 This is used internally to try figure a locally installed build when
916 running tests manually.
917 """
918 if self.oBuild is not None:
919 return True;
920
921 # Try dev build first since that's where I'll be using it first...
922 if True is True: # pylint: disable=comparison-with-itself
923 try:
924 self.oBuild = Build(self, None);
925 reporter.log('VBox %s build at %s (%s).'
926 % (self.oBuild.sType, self.oBuild.sInstallPath, self.oBuild.sDesignation,));
927 return True;
928 except base.GenError:
929 pass;
930
931 # Try default installation locations.
932 if self.sHost == 'win':
933 sProgFiles = os.environ.get('ProgramFiles', 'C:\\Program Files');
934 asLocs = [
935 os.path.join(sProgFiles, 'Oracle', 'VirtualBox'),
936 os.path.join(sProgFiles, 'OracleVM', 'VirtualBox'),
937 os.path.join(sProgFiles, 'Sun', 'VirtualBox'),
938 ];
939 elif self.sHost == 'solaris':
940 asLocs = [ '/opt/VirtualBox-3.2', '/opt/VirtualBox-3.1', '/opt/VirtualBox-3.0', '/opt/VirtualBox' ];
941 elif self.sHost == 'darwin':
942 asLocs = [ '/Applications/VirtualBox.app/Contents/MacOS' ];
943 elif self.sHost == 'linux':
944 asLocs = [ '/opt/VirtualBox-3.2', '/opt/VirtualBox-3.1', '/opt/VirtualBox-3.0', '/opt/VirtualBox' ];
945 else:
946 asLocs = [ '/opt/VirtualBox' ];
947 if 'VBOX_INSTALL_PATH' in os.environ:
948 asLocs.insert(0, os.environ['VBOX_INSTALL_PATH']);
949
950 for sLoc in asLocs:
951 try:
952 self.oBuild = Build(self, sLoc);
953 reporter.log('VBox %s build at %s (%s).'
954 % (self.oBuild.sType, self.oBuild.sInstallPath, self.oBuild.sDesignation,));
955 return True;
956 except base.GenError:
957 pass;
958
959 if not fQuiet:
960 reporter.error('failed to find VirtualBox installation');
961 return False;
962
963 def _detectValidationKit(self, fQuiet = False):
964 """
965 This is used internally by the constructor to try locate an unzipped
966 VBox Validation Kit somewhere in the immediate proximity.
967 """
968 if self.sVBoxValidationKit is not None:
969 return True;
970
971 #
972 # Normally it's found where we're running from, which is the same as
973 # the script directly on the testboxes.
974 #
975 asCandidates = [self.sScriptPath, ];
976 if g_ksValidationKitDir not in asCandidates:
977 asCandidates.append(g_ksValidationKitDir);
978 if os.getcwd() not in asCandidates:
979 asCandidates.append(os.getcwd());
980 if self.oBuild is not None and self.oBuild.sInstallPath not in asCandidates:
981 asCandidates.append(self.oBuild.sInstallPath);
982
983 #
984 # When working out of the tree, we'll search the current directory
985 # as well as parent dirs.
986 #
987 for sDir in list(asCandidates):
988 for i in range(10):
989 sDir = os.path.dirname(sDir);
990 if sDir not in asCandidates:
991 asCandidates.append(sDir);
992
993 #
994 # Do the searching.
995 #
996 sCandidate = None;
997 for i, _ in enumerate(asCandidates):
998 sCandidate = asCandidates[i];
999 if os.path.isfile(os.path.join(sCandidate, 'VBoxValidationKit.iso')):
1000 break;
1001 sCandidate = os.path.join(sCandidate, 'validationkit');
1002 if os.path.isfile(os.path.join(sCandidate, 'VBoxValidationKit.iso')):
1003 break;
1004 sCandidate = None;
1005
1006 fRc = sCandidate is not None;
1007 if fRc is False:
1008 if not fQuiet:
1009 reporter.error('failed to find VBox Validation Kit installation (candidates: %s)' % (asCandidates,));
1010 sCandidate = os.path.join(self.sScriptPath, 'validationkit'); # Don't leave the values as None.
1011
1012 #
1013 # Set the member values.
1014 #
1015 self.sVBoxValidationKit = sCandidate;
1016 self.sVBoxValidationKitIso = os.path.join(sCandidate, 'VBoxValidationKit.iso');
1017 self.sVBoxBootSectors = os.path.join(sCandidate, 'bootsectors');
1018 return fRc;
1019
1020 def _makeEnvironmentChanges(self):
1021 """
1022 Make the necessary VBox related environment changes.
1023 Children not importing the VBox API should call this.
1024 """
1025 # Make sure we've got our own VirtualBox config and VBoxSVC (on XPCOM at least).
1026 if not self.fUseDefaultSvc:
1027 os.environ['VBOX_USER_HOME'] = os.path.join(self.sScratchPath, 'VBoxUserHome');
1028 sUser = os.environ.get('USERNAME', os.environ.get('USER', os.environ.get('LOGNAME', 'unknown')));
1029 os.environ['VBOX_IPC_SOCKETID'] = sUser + '-VBoxTest';
1030 return True;
1031
1032 @staticmethod
1033 def makeApiRevision(uMajor, uMinor, uBuild, uApiRevision):
1034 """ Calculates an API revision number. """
1035 return (long(uMajor) << 56) | (long(uMinor) << 48) | (long(uBuild) << 40) | uApiRevision;
1036
1037 def importVBoxApi(self):
1038 """
1039 Import the 'vboxapi' module from the VirtualBox build we're using and
1040 instantiate the two basic objects.
1041
1042 This will try detect an development or installed build if no build has
1043 been associated with the driver yet.
1044 """
1045 if self.fImportedVBoxApi:
1046 return True;
1047
1048 self._makeEnvironmentChanges();
1049
1050 # Do the detecting.
1051 self._detectBuild();
1052 if self.oBuild is None:
1053 return False;
1054
1055 # Avoid crashing when loading the 32-bit module (or whatever it is that goes bang).
1056 if self.oBuild.sArch == 'x86' \
1057 and self.sHost == 'darwin' \
1058 and platform.architecture()[0] == '64bit' \
1059 and self.oBuild.sKind == 'development' \
1060 and os.getenv('VERSIONER_PYTHON_PREFER_32_BIT') != 'yes':
1061 reporter.log("WARNING: 64-bit python on darwin, 32-bit VBox development build => crash");
1062 reporter.log("WARNING: bash-3.2$ /usr/bin/python2.5 ./testdriver");
1063 reporter.log("WARNING: or");
1064 reporter.log("WARNING: bash-3.2$ VERSIONER_PYTHON_PREFER_32_BIT=yes ./testdriver");
1065 return False;
1066
1067 # Start VBoxSVC and load the vboxapi bits.
1068 if self._startVBoxSVC() is True:
1069 assert(self.oVBoxSvcProcess is not None);
1070
1071 sSavedSysPath = sys.path;
1072 self._setupVBoxApi();
1073 sys.path = sSavedSysPath;
1074
1075 # Adjust the default machine folder.
1076 if self.fImportedVBoxApi and not self.fUseDefaultSvc and self.fpApiVer >= 4.0:
1077 sNewFolder = os.path.join(self.sScratchPath, 'VBoxUserHome', 'Machines');
1078 try:
1079 self.oVBox.systemProperties.defaultMachineFolder = sNewFolder;
1080 except:
1081 self.fImportedVBoxApi = False;
1082 self.oVBoxMgr = None;
1083 self.oVBox = None;
1084 reporter.logXcpt("defaultMachineFolder exception (sNewFolder=%s)" % (sNewFolder,));
1085
1086 # Kill VBoxSVC on failure.
1087 if self.oVBoxMgr is None:
1088 self._stopVBoxSVC();
1089 else:
1090 assert(self.oVBoxSvcProcess is None);
1091 return self.fImportedVBoxApi;
1092
1093 def _startVBoxSVC(self): # pylint: disable=too-many-statements
1094 """ Starts VBoxSVC. """
1095 assert(self.oVBoxSvcProcess is None);
1096
1097 # Setup vbox logging for VBoxSVC now and start it manually. This way
1098 # we can control both logging and shutdown.
1099 self.sVBoxSvcLogFile = '%s/VBoxSVC-debug.log' % (self.sScratchPath,);
1100 try: os.remove(self.sVBoxSvcLogFile);
1101 except: pass;
1102 os.environ['VBOX_LOG'] = self.sLogSvcGroups;
1103 os.environ['VBOX_LOG_FLAGS'] = '%s append' % (self.sLogSvcFlags,); # Append becuse of VBoxXPCOMIPCD.
1104 if self.sLogSvcDest:
1105 os.environ['VBOX_LOG_DEST'] = 'nodeny ' + self.sLogSvcDest;
1106 else:
1107 os.environ['VBOX_LOG_DEST'] = 'nodeny file=%s' % (self.sVBoxSvcLogFile,);
1108 os.environ['VBOXSVC_RELEASE_LOG_FLAGS'] = 'time append';
1109
1110 # Always leave a pid file behind so we can kill it during cleanup-before.
1111 self.sVBoxSvcPidFile = '%s/VBoxSVC.pid' % (self.sScratchPath,);
1112 fWritePidFile = True;
1113
1114 cMsFudge = 1;
1115 sVBoxSVC = '%s/VBoxSVC' % (self.oBuild.sInstallPath,); ## @todo .exe and stuff.
1116 if self.fVBoxSvcInDebugger:
1117 if self.sHost in ('darwin', 'freebsd', 'linux', 'solaris', ):
1118 # Start VBoxSVC in gdb in a new terminal.
1119 #sTerm = '/usr/bin/gnome-terminal'; - doesn't work, some fork+exec stuff confusing us.
1120 sTerm = '/usr/bin/xterm';
1121 if not os.path.isfile(sTerm): sTerm = '/usr/X11/bin/xterm';
1122 if not os.path.isfile(sTerm): sTerm = '/usr/X11R6/bin/xterm';
1123 if not os.path.isfile(sTerm): sTerm = '/usr/bin/xterm';
1124 if not os.path.isfile(sTerm): sTerm = 'xterm';
1125 sGdb = '/usr/bin/gdb';
1126 if not os.path.isfile(sGdb): sGdb = '/usr/local/bin/gdb';
1127 if not os.path.isfile(sGdb): sGdb = '/usr/sfw/bin/gdb';
1128 if not os.path.isfile(sGdb): sGdb = 'gdb';
1129 sGdbCmdLine = '%s --args %s --pidfile %s' % (sGdb, sVBoxSVC, self.sVBoxSvcPidFile);
1130 reporter.log('term="%s" gdb="%s"' % (sTerm, sGdbCmdLine));
1131 os.environ['SHELL'] = self.sOrgShell; # Non-working shell may cause gdb and/or the term problems.
1132 ## @todo -e is deprecated; use "-- <args>".
1133 self.oVBoxSvcProcess = base.Process.spawnp(sTerm, sTerm, '-e', sGdbCmdLine);
1134 os.environ['SHELL'] = self.sOurShell;
1135 if self.oVBoxSvcProcess is not None:
1136 reporter.log('Press enter or return after starting VBoxSVC in the debugger...');
1137 sys.stdin.read(1);
1138 fWritePidFile = False;
1139
1140 elif self.sHost == 'win':
1141 sWinDbg = 'c:\\Program Files\\Debugging Tools for Windows\\windbg.exe';
1142 if not os.path.isfile(sWinDbg): sWinDbg = 'c:\\Program Files\\Debugging Tools for Windows (x64)\\windbg.exe';
1143 if not os.path.isfile(sWinDbg): sWinDbg = 'c:\\Programme\\Debugging Tools for Windows\\windbg.exe'; # Localization rulez! pylint: disable=line-too-long
1144 if not os.path.isfile(sWinDbg): sWinDbg = 'c:\\Programme\\Debugging Tools for Windows (x64)\\windbg.exe';
1145 if not os.path.isfile(sWinDbg): sWinDbg = 'windbg'; # WinDbg must be in the path; better than nothing.
1146 # Assume that everything WinDbg needs is defined using the environment variables.
1147 # See WinDbg help for more information.
1148 reporter.log('windbg="%s"' % (sWinDbg));
1149 self.oVBoxSvcProcess = base.Process.spawn(sWinDbg, sWinDbg, sVBoxSVC + base.exeSuff());
1150 if self.oVBoxSvcProcess is not None:
1151 reporter.log('Press enter or return after starting VBoxSVC in the debugger...');
1152 sys.stdin.read(1);
1153 fWritePidFile = False;
1154 ## @todo add a pipe interface similar to xpcom if feasible, i.e. if
1155 # we can get actual handle values for pipes in python.
1156
1157 else:
1158 reporter.error('Port me!');
1159 else: # Run without a debugger attached.
1160 if self.sHost in ('darwin', 'freebsd', 'linux', 'solaris', ):
1161 #
1162 # XPCOM - We can use a pipe to let VBoxSVC notify us when it's ready.
1163 #
1164 iPipeR, iPipeW = os.pipe();
1165 if hasattr(os, 'set_inheritable'):
1166 os.set_inheritable(iPipeW, True); # pylint: disable=no-member
1167 os.environ['NSPR_INHERIT_FDS'] = 'vboxsvc:startup-pipe:5:0x%x' % (iPipeW,);
1168 reporter.log2("NSPR_INHERIT_FDS=%s" % (os.environ['NSPR_INHERIT_FDS']));
1169
1170 self.oVBoxSvcProcess = base.Process.spawn(sVBoxSVC, sVBoxSVC, '--auto-shutdown'); # SIGUSR1 requirement.
1171 try: # Try make sure we get the SIGINT and not VBoxSVC.
1172 os.setpgid(self.oVBoxSvcProcess.getPid(), 0); # pylint: disable=no-member
1173 os.setpgid(0, 0); # pylint: disable=no-member
1174 except:
1175 reporter.logXcpt();
1176
1177 os.close(iPipeW);
1178 try:
1179 sResponse = os.read(iPipeR, 32);
1180 except:
1181 reporter.logXcpt();
1182 sResponse = None;
1183 os.close(iPipeR);
1184
1185 if hasattr(sResponse, 'decode'):
1186 sResponse = sResponse.decode('utf-8', 'ignore');
1187
1188 if sResponse is None or sResponse.strip() != 'READY':
1189 reporter.error('VBoxSVC failed starting up... (sResponse=%s)' % (sResponse,));
1190 if not self.oVBoxSvcProcess.wait(5000):
1191 self.oVBoxSvcProcess.terminate();
1192 self.oVBoxSvcProcess.wait(5000);
1193 self.oVBoxSvcProcess = None;
1194
1195 elif self.sHost == 'win':
1196 #
1197 # Windows - Just fudge it for now.
1198 #
1199 cMsFudge = 2000;
1200 self.oVBoxSvcProcess = base.Process.spawn(sVBoxSVC, sVBoxSVC);
1201
1202 else:
1203 reporter.error('Port me!');
1204
1205 #
1206 # Enable automatic crash reporting if we succeeded.
1207 #
1208 if self.oVBoxSvcProcess is not None:
1209 self.oVBoxSvcProcess.enableCrashReporting('crash/report/svc', 'crash/dump/svc');
1210
1211 #
1212 # Wait for debugger to attach.
1213 #
1214 if self.oVBoxSvcProcess is not None and self.fVBoxSvcWaitForDebugger:
1215 reporter.log('Press any key after attaching to VBoxSVC (pid %s) with a debugger...'
1216 % (self.oVBoxSvcProcess.getPid(),));
1217 sys.stdin.read(1);
1218
1219 #
1220 # Fudge and pid file.
1221 #
1222 if self.oVBoxSvcProcess is not None and not self.oVBoxSvcProcess.wait(cMsFudge):
1223 if fWritePidFile:
1224 iPid = self.oVBoxSvcProcess.getPid();
1225 try:
1226 oFile = utils.openNoInherit(self.sVBoxSvcPidFile, "w+");
1227 oFile.write('%s' % (iPid,));
1228 oFile.close();
1229 except:
1230 reporter.logXcpt('sPidFile=%s' % (self.sVBoxSvcPidFile,));
1231 reporter.log('VBoxSVC PID=%u' % (iPid,));
1232
1233 #
1234 # Finally add the task so we'll notice when it dies in a relatively timely manner.
1235 #
1236 self.addTask(self.oVBoxSvcProcess);
1237 else:
1238 self.oVBoxSvcProcess = None;
1239 try: os.remove(self.sVBoxSvcPidFile);
1240 except: pass;
1241
1242 return self.oVBoxSvcProcess is not None;
1243
1244
1245 def _killVBoxSVCByPidFile(self, sPidFile):
1246 """ Kill a VBoxSVC given the pid from it's pid file. """
1247
1248 # Read the pid file.
1249 if not os.path.isfile(sPidFile):
1250 return False;
1251 try:
1252 oFile = utils.openNoInherit(sPidFile, "r");
1253 sPid = oFile.readline().strip();
1254 oFile.close();
1255 except:
1256 reporter.logXcpt('sPidfile=%s' % (sPidFile,));
1257 return False;
1258
1259 # Convert the pid to an integer and validate the range a little bit.
1260 try:
1261 iPid = long(sPid);
1262 except:
1263 reporter.logXcpt('sPidfile=%s sPid="%s"' % (sPidFile, sPid));
1264 return False;
1265 if iPid <= 0:
1266 reporter.log('negative pid - sPidfile=%s sPid="%s" iPid=%d' % (sPidFile, sPid, iPid));
1267 return False;
1268
1269 # Take care checking that it's VBoxSVC we're about to inhume.
1270 if base.processCheckPidAndName(iPid, "VBoxSVC") is not True:
1271 reporter.log('Ignoring stale VBoxSVC pid file (pid=%s)' % (iPid,));
1272 return False;
1273
1274 # Loop thru our different ways of getting VBoxSVC to terminate.
1275 for aHow in [ [ base.sendUserSignal1, 5000, 'Dropping VBoxSVC a SIGUSR1 hint...'], \
1276 [ base.processInterrupt, 5000, 'Dropping VBoxSVC a SIGINT hint...'], \
1277 [ base.processTerminate, 7500, 'VBoxSVC is still around, killing it...'] ]:
1278 reporter.log(aHow[2]);
1279 if aHow[0](iPid) is True:
1280 msStart = base.timestampMilli();
1281 while base.timestampMilli() - msStart < 5000 \
1282 and base.processExists(iPid):
1283 time.sleep(0.2);
1284
1285 fRc = not base.processExists(iPid);
1286 if fRc is True:
1287 break;
1288 if fRc:
1289 reporter.log('Successfully killed VBoxSVC (pid=%s)' % (iPid,));
1290 else:
1291 reporter.log('Failed to kill VBoxSVC (pid=%s)' % (iPid,));
1292 return fRc;
1293
1294 def _stopVBoxSVC(self):
1295 """
1296 Stops VBoxSVC. Try the polite way first.
1297 """
1298
1299 if self.oVBoxSvcProcess:
1300 self.removeTask(self.oVBoxSvcProcess);
1301 self.oVBoxSvcProcess.enableCrashReporting(None, None); # Disables it.
1302
1303 fRc = False;
1304 if self.oVBoxSvcProcess is not None \
1305 and not self.fVBoxSvcInDebugger:
1306 # by process object.
1307 if self.oVBoxSvcProcess.isRunning():
1308 reporter.log('Dropping VBoxSVC a SIGUSR1 hint...');
1309 if not self.oVBoxSvcProcess.sendUserSignal1() \
1310 or not self.oVBoxSvcProcess.wait(5000):
1311 reporter.log('Dropping VBoxSVC a SIGINT hint...');
1312 if not self.oVBoxSvcProcess.interrupt() \
1313 or not self.oVBoxSvcProcess.wait(5000):
1314 reporter.log('VBoxSVC is still around, killing it...');
1315 self.oVBoxSvcProcess.terminate();
1316 self.oVBoxSvcProcess.wait(7500);
1317 else:
1318 reporter.log('VBoxSVC is no longer running...');
1319
1320 if not self.oVBoxSvcProcess.isRunning():
1321 iExit = self.oVBoxSvcProcess.getExitCode();
1322 if iExit != 0 or not self.oVBoxSvcProcess.isNormalExit():
1323 reporter.error("VBoxSVC exited with status %d (%#x)" % (iExit, self.oVBoxSvcProcess.uExitCode));
1324 self.oVBoxSvcProcess = None;
1325 else:
1326 # by pid file.
1327 self._killVBoxSVCByPidFile('%s/VBoxSVC.pid' % (self.sScratchPath,));
1328 return fRc;
1329
1330 def _setupVBoxApi(self):
1331 """
1332 Import and set up the vboxapi.
1333 The caller saves and restores sys.path.
1334 """
1335
1336 # Setup vbox logging for self (the test driver).
1337 self.sSelfLogFile = '%s/VBoxTestDriver.log' % (self.sScratchPath,);
1338 try: os.remove(self.sSelfLogFile);
1339 except: pass;
1340 os.environ['VBOX_LOG'] = self.sLogSelfGroups;
1341 os.environ['VBOX_LOG_FLAGS'] = '%s append' % (self.sLogSelfFlags, );
1342 if self.sLogSelfDest:
1343 os.environ['VBOX_LOG_DEST'] = 'nodeny ' + self.sLogSelfDest;
1344 else:
1345 os.environ['VBOX_LOG_DEST'] = 'nodeny file=%s' % (self.sSelfLogFile,);
1346 os.environ['VBOX_RELEASE_LOG_FLAGS'] = 'time append';
1347
1348 # Hack the sys.path + environment so the vboxapi can be found.
1349 sys.path.insert(0, self.oBuild.sInstallPath);
1350 if self.oBuild.sSdkPath is not None:
1351 sys.path.insert(0, os.path.join(self.oBuild.sSdkPath, 'installer'))
1352 sys.path.insert(1, os.path.join(self.oBuild.sSdkPath, 'install')); # stupid stupid windows installer!
1353 sys.path.insert(2, os.path.join(self.oBuild.sSdkPath, 'bindings', 'xpcom', 'python'))
1354 os.environ['VBOX_PROGRAM_PATH'] = self.oBuild.sInstallPath;
1355 reporter.log("sys.path: %s" % (sys.path));
1356
1357 try:
1358 from vboxapi import VirtualBoxManager; # pylint: disable=import-error
1359 except:
1360 reporter.logXcpt('Error importing vboxapi');
1361 return False;
1362
1363 # Exception and error hacks.
1364 try:
1365 # pylint: disable=import-error
1366 if self.sHost == 'win':
1367 from pythoncom import com_error as NativeComExceptionClass # pylint: disable=no-name-in-module
1368 import winerror as NativeComErrorClass
1369 else:
1370 from xpcom import Exception as NativeComExceptionClass
1371 from xpcom import nsError as NativeComErrorClass
1372 # pylint: enable=import-error
1373 except:
1374 reporter.logXcpt('Error importing (XP)COM related stuff for exception hacks and errors');
1375 return False;
1376 __deployExceptionHacks__(NativeComExceptionClass)
1377 ComError.copyErrors(NativeComErrorClass);
1378
1379 # Create the manager.
1380 try:
1381 self.oVBoxMgr = VirtualBoxManager(None, None)
1382 except:
1383 self.oVBoxMgr = None;
1384 reporter.logXcpt('VirtualBoxManager exception');
1385 return False;
1386
1387 # Figure the API version.
1388 try:
1389 oVBox = self.oVBoxMgr.getVirtualBox();
1390
1391 try:
1392 sVer = oVBox.version;
1393 except:
1394 reporter.logXcpt('Failed to get VirtualBox version, assuming 4.0.0');
1395 sVer = "4.0.0";
1396 reporter.log("IVirtualBox.version=%s" % (sVer,));
1397
1398 # Convert the string to three integer values and check ranges.
1399 asVerComponents = sVer.split('.');
1400 try:
1401 sLast = asVerComponents[2].split('_')[0].split('r')[0];
1402 aiVerComponents = (int(asVerComponents[0]), int(asVerComponents[1]), int(sLast));
1403 except:
1404 raise base.GenError('Malformed version "%s"' % (sVer,));
1405 if aiVerComponents[0] < 3 or aiVerComponents[0] > 19:
1406 raise base.GenError('Malformed version "%s" - 1st component is out of bounds 3..19: %u'
1407 % (sVer, aiVerComponents[0]));
1408 if aiVerComponents[1] < 0 or aiVerComponents[1] > 9:
1409 raise base.GenError('Malformed version "%s" - 2nd component is out of bounds 0..9: %u'
1410 % (sVer, aiVerComponents[1]));
1411 if aiVerComponents[2] < 0 or aiVerComponents[2] > 99:
1412 raise base.GenError('Malformed version "%s" - 3rd component is out of bounds 0..99: %u'
1413 % (sVer, aiVerComponents[2]));
1414
1415 # Convert the three integers into a floating point value. The API is stable within a
1416 # x.y release, so the third component only indicates whether it's a stable or
1417 # development build of the next release.
1418 self.fpApiVer = aiVerComponents[0] + 0.1 * aiVerComponents[1];
1419 if aiVerComponents[2] >= 51:
1420 if self.fpApiVer not in [6.1, 5.2, 4.3, 3.2,]:
1421 self.fpApiVer += 0.1;
1422 else:
1423 self.fpApiVer = int(self.fpApiVer) + 1.0;
1424 # fudge value to be always bigger than the nominal value (0.1 gets rounded down)
1425 if round(self.fpApiVer, 1) > self.fpApiVer:
1426 self.fpApiVer += sys.float_info.epsilon * self.fpApiVer / 2.0;
1427
1428 try:
1429 self.uRevision = oVBox.revision;
1430 except:
1431 reporter.logXcpt('Failed to get VirtualBox revision, assuming 0');
1432 self.uRevision = 0;
1433 reporter.log("IVirtualBox.revision=%u" % (self.uRevision,));
1434
1435 try:
1436 self.uApiRevision = oVBox.APIRevision;
1437 except:
1438 reporter.logXcpt('Failed to get VirtualBox APIRevision, faking it.');
1439 self.uApiRevision = self.makeApiRevision(aiVerComponents[0], aiVerComponents[1], aiVerComponents[2], 0);
1440 reporter.log("IVirtualBox.APIRevision=%#x" % (self.uApiRevision,));
1441
1442 # Patch VBox manage to gloss over portability issues (error constants, etc).
1443 self._patchVBoxMgr();
1444
1445 # Wrap oVBox.
1446 from testdriver.vboxwrappers import VirtualBoxWrapper;
1447 self.oVBox = VirtualBoxWrapper(oVBox, self.oVBoxMgr, self.fpApiVer, self);
1448
1449 # Install the constant wrapping hack.
1450 vboxcon.goHackModuleClass.oVBoxMgr = self.oVBoxMgr; # VBoxConstantWrappingHack.
1451 vboxcon.fpApiVer = self.fpApiVer;
1452 reporter.setComXcptFormatter(formatComOrXpComException);
1453
1454 except:
1455 self.oVBoxMgr = None;
1456 self.oVBox = None;
1457 reporter.logXcpt("getVirtualBox / API version exception");
1458 return False;
1459
1460 # Done
1461 self.fImportedVBoxApi = True;
1462 reporter.log('Found version %s (%s)' % (self.fpApiVer, sVer));
1463 return True;
1464
1465 def _patchVBoxMgr(self):
1466 """
1467 Glosses over missing self.oVBoxMgr methods on older VBox versions.
1468 """
1469
1470 def _xcptGetResult(oSelf, oXcpt = None):
1471 """ See vboxapi. """
1472 _ = oSelf;
1473 if oXcpt is None: oXcpt = sys.exc_info()[1];
1474 if sys.platform == 'win32':
1475 import winerror; # pylint: disable=import-error
1476 hrXcpt = oXcpt.hresult;
1477 if hrXcpt == winerror.DISP_E_EXCEPTION:
1478 hrXcpt = oXcpt.excepinfo[5];
1479 else:
1480 hrXcpt = oXcpt.error;
1481 return hrXcpt;
1482
1483 def _xcptIsDeadInterface(oSelf, oXcpt = None):
1484 """ See vboxapi. """
1485 return oSelf.xcptGetStatus(oXcpt) in [
1486 0x80004004, -2147467260, # NS_ERROR_ABORT
1487 0x800706be, -2147023170, # NS_ERROR_CALL_FAILED (RPC_S_CALL_FAILED)
1488 0x800706ba, -2147023174, # RPC_S_SERVER_UNAVAILABLE.
1489 0x800706be, -2147023170, # RPC_S_CALL_FAILED.
1490 0x800706bf, -2147023169, # RPC_S_CALL_FAILED_DNE.
1491 0x80010108, -2147417848, # RPC_E_DISCONNECTED.
1492 0x800706b5, -2147023179, # RPC_S_UNKNOWN_IF
1493 ];
1494
1495 def _xcptIsOurXcptKind(oSelf, oXcpt = None):
1496 """ See vboxapi. """
1497 _ = oSelf;
1498 if oXcpt is None: oXcpt = sys.exc_info()[1];
1499 if sys.platform == 'win32':
1500 from pythoncom import com_error as NativeComExceptionClass # pylint: disable=import-error,no-name-in-module
1501 else:
1502 from xpcom import Exception as NativeComExceptionClass # pylint: disable=import-error
1503 return isinstance(oXcpt, NativeComExceptionClass);
1504
1505 def _xcptIsEqual(oSelf, oXcpt, hrStatus):
1506 """ See vboxapi. """
1507 hrXcpt = oSelf.xcptGetResult(oXcpt);
1508 return hrXcpt == hrStatus or hrXcpt == hrStatus - 0x100000000; # pylint: disable=consider-using-in
1509
1510 def _xcptToString(oSelf, oXcpt):
1511 """ See vboxapi. """
1512 _ = oSelf;
1513 if oXcpt is None: oXcpt = sys.exc_info()[1];
1514 return str(oXcpt);
1515
1516 def _getEnumValueName(oSelf, sEnumTypeNm, oEnumValue, fTypePrefix = False):
1517 """ See vboxapi. """
1518 _ = oSelf; _ = fTypePrefix;
1519 return '%s::%s' % (sEnumTypeNm, oEnumValue);
1520
1521 # Add utilities found in newer vboxapi revision.
1522 if not hasattr(self.oVBoxMgr, 'xcptIsDeadInterface'):
1523 import types;
1524 self.oVBoxMgr.xcptGetResult = types.MethodType(_xcptGetResult, self.oVBoxMgr);
1525 self.oVBoxMgr.xcptIsDeadInterface = types.MethodType(_xcptIsDeadInterface, self.oVBoxMgr);
1526 self.oVBoxMgr.xcptIsOurXcptKind = types.MethodType(_xcptIsOurXcptKind, self.oVBoxMgr);
1527 self.oVBoxMgr.xcptIsEqual = types.MethodType(_xcptIsEqual, self.oVBoxMgr);
1528 self.oVBoxMgr.xcptToString = types.MethodType(_xcptToString, self.oVBoxMgr);
1529 if not hasattr(self.oVBoxMgr, 'getEnumValueName'):
1530 import types;
1531 self.oVBoxMgr.getEnumValueName = types.MethodType(_getEnumValueName, self.oVBoxMgr);
1532
1533
1534 def _teardownVBoxApi(self): # pylint: disable=too-many-statements
1535 """
1536 Drop all VBox object references and shutdown com/xpcom.
1537 """
1538 if not self.fImportedVBoxApi:
1539 return True;
1540 import gc;
1541
1542 # Drop all references we've have to COM objects.
1543 self.aoRemoteSessions = [];
1544 self.aoVMs = [];
1545 self.oVBoxMgr = None;
1546 self.oVBox = None;
1547 vboxcon.goHackModuleClass.oVBoxMgr = None; # VBoxConstantWrappingHack.
1548 reporter.setComXcptFormatter(None);
1549
1550 # Do garbage collection to try get rid of those objects.
1551 try:
1552 gc.collect();
1553 except:
1554 reporter.logXcpt();
1555 self.fImportedVBoxApi = False;
1556
1557 # Check whether the python is still having any COM objects/interfaces around.
1558 cVBoxMgrs = 0;
1559 aoObjsLeftBehind = [];
1560 if self.sHost == 'win':
1561 import pythoncom; # pylint: disable=import-error
1562 try:
1563 cIfs = pythoncom._GetInterfaceCount(); # pylint: disable=no-member,protected-access
1564 cObjs = pythoncom._GetGatewayCount(); # pylint: disable=no-member,protected-access
1565 if cObjs == 0 and cIfs == 0:
1566 reporter.log('_teardownVBoxApi: no interfaces or objects left behind.');
1567 else:
1568 reporter.log('_teardownVBoxApi: Python COM still has %s objects and %s interfaces...' % ( cObjs, cIfs));
1569
1570 from win32com.client import DispatchBaseClass; # pylint: disable=import-error
1571 for oObj in gc.get_objects():
1572 if isinstance(oObj, DispatchBaseClass):
1573 reporter.log('_teardownVBoxApi: %s' % (oObj,));
1574 aoObjsLeftBehind.append(oObj);
1575 elif utils.getObjectTypeName(oObj) == 'VirtualBoxManager':
1576 reporter.log('_teardownVBoxApi: %s' % (oObj,));
1577 cVBoxMgrs += 1;
1578 aoObjsLeftBehind.append(oObj);
1579 oObj = None;
1580 except:
1581 reporter.logXcpt();
1582
1583 # If not being used, we can safely uninitialize COM.
1584 if cIfs == 0 and cObjs == 0 and cVBoxMgrs == 0 and not aoObjsLeftBehind:
1585 reporter.log('_teardownVBoxApi: Calling CoUninitialize...');
1586 try: pythoncom.CoUninitialize(); # pylint: disable=no-member
1587 except: reporter.logXcpt();
1588 else:
1589 reporter.log('_teardownVBoxApi: Returned from CoUninitialize.');
1590 else:
1591 try:
1592 # XPCOM doesn't crash and burn like COM if you shut it down with interfaces and objects around.
1593 # Also, it keeps a number of internal objects and interfaces around to do its job, so shutting
1594 # it down before we go looking for dangling interfaces is more or less required.
1595 from xpcom import _xpcom as _xpcom; # pylint: disable=import-error,useless-import-alias
1596 hrc = _xpcom.DeinitCOM();
1597 cIfs = _xpcom._GetInterfaceCount(); # pylint: disable=protected-access
1598 cObjs = _xpcom._GetGatewayCount(); # pylint: disable=protected-access
1599
1600 if cObjs == 0 and cIfs == 0:
1601 reporter.log('_teardownVBoxApi: No XPCOM interfaces or objects active. (hrc=%#x)' % (hrc,));
1602 else:
1603 reporter.log('_teardownVBoxApi: %s XPCOM objects and %s interfaces still around! (hrc=%#x)'
1604 % (cObjs, cIfs, hrc));
1605 if hasattr(_xpcom, '_DumpInterfaces'):
1606 try: _xpcom._DumpInterfaces(); # pylint: disable=protected-access
1607 except: reporter.logXcpt('_teardownVBoxApi: _DumpInterfaces failed');
1608
1609 from xpcom.client import Component; # pylint: disable=import-error
1610 for oObj in gc.get_objects():
1611 if isinstance(oObj, Component):
1612 reporter.log('_teardownVBoxApi: %s' % (oObj,));
1613 aoObjsLeftBehind.append(oObj);
1614 if utils.getObjectTypeName(oObj) == 'VirtualBoxManager':
1615 reporter.log('_teardownVBoxApi: %s' % (oObj,));
1616 cVBoxMgrs += 1;
1617 aoObjsLeftBehind.append(oObj);
1618 oObj = None;
1619 except:
1620 reporter.logXcpt();
1621
1622 # Try get the referrers to (XP)COM interfaces and objects that was left behind.
1623 for iObj in range(len(aoObjsLeftBehind)): # pylint: disable=consider-using-enumerate
1624 try:
1625 aoReferrers = gc.get_referrers(aoObjsLeftBehind[iObj]);
1626 reporter.log('_teardownVBoxApi: Found %u referrers to %s:' % (len(aoReferrers), aoObjsLeftBehind[iObj],));
1627 for oReferrer in aoReferrers:
1628 oMyFrame = sys._getframe(0); # pylint: disable=protected-access
1629 if oReferrer is oMyFrame:
1630 reporter.log('_teardownVBoxApi: - frame of this function');
1631 elif oReferrer is aoObjsLeftBehind:
1632 reporter.log('_teardownVBoxApi: - aoObjsLeftBehind');
1633 else:
1634 fPrinted = False;
1635 if isinstance(oReferrer, (dict, list, tuple)):
1636 try:
1637 aoSubReferreres = gc.get_referrers(oReferrer);
1638 for oSubRef in aoSubReferreres:
1639 if not isinstance(oSubRef, list) \
1640 and not isinstance(oSubRef, dict) \
1641 and oSubRef is not oMyFrame \
1642 and oSubRef is not aoSubReferreres:
1643 reporter.log('_teardownVBoxApi: - %s :: %s:'
1644 % (utils.getObjectTypeName(oSubRef), utils.getObjectTypeName(oReferrer)));
1645 fPrinted = True;
1646 break;
1647 del aoSubReferreres;
1648 except:
1649 reporter.logXcpt('subref');
1650 if not fPrinted:
1651 reporter.log('_teardownVBoxApi: - %s:' % (utils.getObjectTypeName(oReferrer),));
1652 try:
1653 import pprint;
1654 for sLine in pprint.pformat(oReferrer, width = 130).split('\n'):
1655 reporter.log('_teardownVBoxApi: %s' % (sLine,));
1656 except:
1657 reporter.log('_teardownVBoxApi: %s' % (oReferrer,));
1658 except:
1659 reporter.logXcpt();
1660 del aoObjsLeftBehind;
1661
1662 # Force garbage collection again, just for good measure.
1663 try:
1664 gc.collect();
1665 time.sleep(0.5); # fudge factor
1666 except:
1667 reporter.logXcpt();
1668 return True;
1669
1670 def _powerOffAllVms(self):
1671 """
1672 Tries to power off all running VMs.
1673 """
1674 for oSession in self.aoRemoteSessions:
1675 uPid = oSession.getPid();
1676 if uPid is not None:
1677 reporter.log('_powerOffAllVms: PID is %s for %s, trying to kill it.' % (uPid, oSession.sName,));
1678 base.processKill(uPid);
1679 else:
1680 reporter.log('_powerOffAllVms: No PID for %s' % (oSession.sName,));
1681 oSession.close();
1682 return None;
1683
1684
1685
1686 #
1687 # Build type, OS and arch getters.
1688 #
1689
1690 def getBuildType(self):
1691 """
1692 Get the build type.
1693 """
1694 if not self._detectBuild():
1695 return 'release';
1696 return self.oBuild.sType;
1697
1698 def getBuildOs(self):
1699 """
1700 Get the build OS.
1701 """
1702 if not self._detectBuild():
1703 return self.sHost;
1704 return self.oBuild.sOs;
1705
1706 def getBuildArch(self):
1707 """
1708 Get the build arch.
1709 """
1710 if not self._detectBuild():
1711 return self.sHostArch;
1712 return self.oBuild.sArch;
1713
1714 def getGuestAdditionsIso(self):
1715 """
1716 Get the path to the guest addition iso.
1717 """
1718 if not self._detectBuild():
1719 return None;
1720 return self.oBuild.sGuestAdditionsIso;
1721
1722 #
1723 # Override everything from the base class so the testdrivers don't have to
1724 # check whether we have overridden a method or not.
1725 #
1726
1727 def showUsage(self):
1728 rc = base.TestDriver.showUsage(self);
1729 reporter.log('');
1730 reporter.log('Generic VirtualBox Options:');
1731 reporter.log(' --vbox-session-type <type>');
1732 reporter.log(' Sets the session type. Typical values are: gui, headless, sdl');
1733 reporter.log(' Default: %s' % (self.sSessionTypeDef));
1734 reporter.log(' --vrdp, --no-vrdp');
1735 reporter.log(' Enables VRDP, ports starting at 6000');
1736 reporter.log(' Default: --vrdp');
1737 reporter.log(' --vrdp-base-port <port>');
1738 reporter.log(' Sets the base for VRDP port assignments.');
1739 reporter.log(' Default: %s' % (self.uVrdpBasePortDef));
1740 reporter.log(' --vbox-default-bridged-nic <interface>');
1741 reporter.log(' Sets the default interface for bridged networking.');
1742 reporter.log(' Default: autodetect');
1743 reporter.log(' --vbox-use-svc-defaults');
1744 reporter.log(' Use default locations and files for VBoxSVC. This is useful');
1745 reporter.log(' for automatically configuring the test VMs for debugging.');
1746 reporter.log(' --vbox-log');
1747 reporter.log(' The VBox logger group settings for everyone.');
1748 reporter.log(' --vbox-log-flags');
1749 reporter.log(' The VBox logger flags settings for everyone.');
1750 reporter.log(' --vbox-log-dest');
1751 reporter.log(' The VBox logger destination settings for everyone.');
1752 reporter.log(' --vbox-self-log');
1753 reporter.log(' The VBox logger group settings for the testdriver.');
1754 reporter.log(' --vbox-self-log-flags');
1755 reporter.log(' The VBox logger flags settings for the testdriver.');
1756 reporter.log(' --vbox-self-log-dest');
1757 reporter.log(' The VBox logger destination settings for the testdriver.');
1758 reporter.log(' --vbox-session-log');
1759 reporter.log(' The VM session logger group settings.');
1760 reporter.log(' --vbox-session-log-flags');
1761 reporter.log(' The VM session logger flags.');
1762 reporter.log(' --vbox-session-log-dest');
1763 reporter.log(' The VM session logger destination settings.');
1764 reporter.log(' --vbox-svc-log');
1765 reporter.log(' The VBoxSVC logger group settings.');
1766 reporter.log(' --vbox-svc-log-flags');
1767 reporter.log(' The VBoxSVC logger flag settings.');
1768 reporter.log(' --vbox-svc-log-dest');
1769 reporter.log(' The VBoxSVC logger destination settings.');
1770 reporter.log(' --vbox-svc-debug');
1771 reporter.log(' Start VBoxSVC in a debugger.');
1772 reporter.log(' --vbox-svc-wait-debug');
1773 reporter.log(' Start VBoxSVC and wait for debugger to attach to it.');
1774 reporter.log(' --vbox-always-upload-logs');
1775 reporter.log(' Whether to always upload log files, or only do so on failure.');
1776 reporter.log(' --vbox-always-upload-screenshots');
1777 reporter.log(' Whether to always upload final screen shots, or only do so on failure.');
1778 reporter.log(' --vbox-debugger, --no-vbox-debugger');
1779 reporter.log(' Enables the VBox debugger, port at 5000');
1780 reporter.log(' Default: --vbox-debugger');
1781 if self.oTestVmSet is not None:
1782 self.oTestVmSet.showUsage();
1783 return rc;
1784
1785 def parseOption(self, asArgs, iArg): # pylint: disable=too-many-statements
1786 if asArgs[iArg] == '--vbox-session-type':
1787 iArg += 1;
1788 if iArg >= len(asArgs):
1789 raise base.InvalidOption('The "--vbox-session-type" takes an argument');
1790 self.sSessionType = asArgs[iArg];
1791 elif asArgs[iArg] == '--vrdp':
1792 self.fEnableVrdp = True;
1793 elif asArgs[iArg] == '--no-vrdp':
1794 self.fEnableVrdp = False;
1795 elif asArgs[iArg] == '--vrdp-base-port':
1796 iArg += 1;
1797 if iArg >= len(asArgs):
1798 raise base.InvalidOption('The "--vrdp-base-port" takes an argument');
1799 try: self.uVrdpBasePort = int(asArgs[iArg]);
1800 except: raise base.InvalidOption('The "--vrdp-base-port" value "%s" is not a valid integer' % (asArgs[iArg],));
1801 if self.uVrdpBasePort <= 0 or self.uVrdpBasePort >= 65530:
1802 raise base.InvalidOption('The "--vrdp-base-port" value "%s" is not in the valid range (1..65530)'
1803 % (asArgs[iArg],));
1804 elif asArgs[iArg] == '--vbox-default-bridged-nic':
1805 iArg += 1;
1806 if iArg >= len(asArgs):
1807 raise base.InvalidOption('The "--vbox-default-bridged-nic" takes an argument');
1808 self.sDefBridgedNic = asArgs[iArg];
1809 elif asArgs[iArg] == '--vbox-use-svc-defaults':
1810 self.fUseDefaultSvc = True;
1811 elif asArgs[iArg] == '--vbox-self-log':
1812 iArg += 1;
1813 if iArg >= len(asArgs):
1814 raise base.InvalidOption('The "--vbox-self-log" takes an argument');
1815 self.sLogSelfGroups = asArgs[iArg];
1816 elif asArgs[iArg] == '--vbox-self-log-flags':
1817 iArg += 1;
1818 if iArg >= len(asArgs):
1819 raise base.InvalidOption('The "--vbox-self-log-flags" takes an argument');
1820 self.sLogSelfFlags = asArgs[iArg];
1821 elif asArgs[iArg] == '--vbox-self-log-dest':
1822 iArg += 1;
1823 if iArg >= len(asArgs):
1824 raise base.InvalidOption('The "--vbox-self-log-dest" takes an argument');
1825 self.sLogSelfDest = asArgs[iArg];
1826 elif asArgs[iArg] == '--vbox-session-log':
1827 iArg += 1;
1828 if iArg >= len(asArgs):
1829 raise base.InvalidOption('The "--vbox-session-log" takes an argument');
1830 self.sLogSessionGroups = asArgs[iArg];
1831 elif asArgs[iArg] == '--vbox-session-log-flags':
1832 iArg += 1;
1833 if iArg >= len(asArgs):
1834 raise base.InvalidOption('The "--vbox-session-log-flags" takes an argument');
1835 self.sLogSessionFlags = asArgs[iArg];
1836 elif asArgs[iArg] == '--vbox-session-log-dest':
1837 iArg += 1;
1838 if iArg >= len(asArgs):
1839 raise base.InvalidOption('The "--vbox-session-log-dest" takes an argument');
1840 self.sLogSessionDest = asArgs[iArg];
1841 elif asArgs[iArg] == '--vbox-svc-log':
1842 iArg += 1;
1843 if iArg >= len(asArgs):
1844 raise base.InvalidOption('The "--vbox-svc-log" takes an argument');
1845 self.sLogSvcGroups = asArgs[iArg];
1846 elif asArgs[iArg] == '--vbox-svc-log-flags':
1847 iArg += 1;
1848 if iArg >= len(asArgs):
1849 raise base.InvalidOption('The "--vbox-svc-log-flags" takes an argument');
1850 self.sLogSvcFlags = asArgs[iArg];
1851 elif asArgs[iArg] == '--vbox-svc-log-dest':
1852 iArg += 1;
1853 if iArg >= len(asArgs):
1854 raise base.InvalidOption('The "--vbox-svc-log-dest" takes an argument');
1855 self.sLogSvcDest = asArgs[iArg];
1856 elif asArgs[iArg] == '--vbox-log':
1857 iArg += 1;
1858 if iArg >= len(asArgs):
1859 raise base.InvalidOption('The "--vbox-log" takes an argument');
1860 self.sLogSelfGroups = asArgs[iArg];
1861 self.sLogSessionGroups = asArgs[iArg];
1862 self.sLogSvcGroups = asArgs[iArg];
1863 elif asArgs[iArg] == '--vbox-log-flags':
1864 iArg += 1;
1865 if iArg >= len(asArgs):
1866 raise base.InvalidOption('The "--vbox-svc-flags" takes an argument');
1867 self.sLogSelfFlags = asArgs[iArg];
1868 self.sLogSessionFlags = asArgs[iArg];
1869 self.sLogSvcFlags = asArgs[iArg];
1870 elif asArgs[iArg] == '--vbox-log-dest':
1871 iArg += 1;
1872 if iArg >= len(asArgs):
1873 raise base.InvalidOption('The "--vbox-log-dest" takes an argument');
1874 self.sLogSelfDest = asArgs[iArg];
1875 self.sLogSessionDest = asArgs[iArg];
1876 self.sLogSvcDest = asArgs[iArg];
1877 elif asArgs[iArg] == '--vbox-svc-debug':
1878 self.fVBoxSvcInDebugger = True;
1879 elif asArgs[iArg] == '--vbox-svc-wait-debug':
1880 self.fVBoxSvcWaitForDebugger = True;
1881 elif asArgs[iArg] == '--vbox-always-upload-logs':
1882 self.fAlwaysUploadLogs = True;
1883 elif asArgs[iArg] == '--vbox-always-upload-screenshots':
1884 self.fAlwaysUploadScreenshots = True;
1885 elif asArgs[iArg] == '--vbox-debugger':
1886 self.fEnableDebugger = True;
1887 elif asArgs[iArg] == '--no-vbox-debugger':
1888 self.fEnableDebugger = False;
1889 else:
1890 # Relevant for selecting VMs to test?
1891 if self.oTestVmSet is not None:
1892 iRc = self.oTestVmSet.parseOption(asArgs, iArg);
1893 if iRc != iArg:
1894 return iRc;
1895
1896 # Hand it to the base class.
1897 return base.TestDriver.parseOption(self, asArgs, iArg);
1898 return iArg + 1;
1899
1900 def completeOptions(self):
1901 return base.TestDriver.completeOptions(self);
1902
1903 def getNetworkAdapterNameFromType(self, oNic):
1904 """
1905 Returns the network adapter name from a given adapter type.
1906
1907 Returns an empty string if not found / invalid.
1908 """
1909 sAdpName = '';
1910 if oNic.adapterType == vboxcon.NetworkAdapterType_Am79C970A \
1911 or oNic.adapterType == vboxcon.NetworkAdapterType_Am79C973 \
1912 or oNic.adapterType == vboxcon.NetworkAdapterType_Am79C960:
1913 sAdpName = 'pcnet';
1914 elif oNic.adapterType == vboxcon.NetworkAdapterType_I82540EM \
1915 or oNic.adapterType == vboxcon.NetworkAdapterType_I82543GC \
1916 or oNic.adapterType == vboxcon.NetworkAdapterType_I82545EM:
1917 sAdpName = 'e1000';
1918 elif oNic.adapterType == vboxcon.NetworkAdapterType_Virtio:
1919 sAdpName = 'virtio-net';
1920 elif oNic.adapterType == vboxcon.NetworkAdapterType_Virtio_1_0:
1921 sAdpName = 'virtio-net-1-dot-0';
1922 return sAdpName;
1923
1924 def getResourceSet(self):
1925 asRsrcs = [];
1926 if self.oTestVmSet is not None:
1927 asRsrcs.extend(self.oTestVmSet.getResourceSet());
1928 asRsrcs.extend(base.TestDriver.getResourceSet(self));
1929 return asRsrcs;
1930
1931 def actionExtract(self):
1932 return base.TestDriver.actionExtract(self);
1933
1934 def actionVerify(self):
1935 return base.TestDriver.actionVerify(self);
1936
1937 def actionConfig(self):
1938 return base.TestDriver.actionConfig(self);
1939
1940 def actionExecute(self):
1941 return base.TestDriver.actionExecute(self);
1942
1943 def actionCleanupBefore(self):
1944 """
1945 Kill any VBoxSVC left behind by a previous test run.
1946 """
1947 self._killVBoxSVCByPidFile('%s/VBoxSVC.pid' % (self.sScratchPath,));
1948 return base.TestDriver.actionCleanupBefore(self);
1949
1950 def actionCleanupAfter(self):
1951 """
1952 Clean up the VBox bits and then call the base driver.
1953
1954 If your test driver overrides this, it should normally call us at the
1955 end of the job.
1956 """
1957 cErrorsEntry = reporter.getErrorCount();
1958
1959 # Kill any left over VM processes.
1960 self._powerOffAllVms();
1961
1962 # Drop all VBox object references and shutdown xpcom then
1963 # terminating VBoxSVC, with extreme prejudice if need be.
1964 self._teardownVBoxApi();
1965 self._stopVBoxSVC();
1966
1967 # Add the VBoxSVC and testdriver debug+release log files.
1968 if self.fAlwaysUploadLogs or reporter.getErrorCount() > 0:
1969 if self.sVBoxSvcLogFile is not None and os.path.isfile(self.sVBoxSvcLogFile):
1970 reporter.addLogFile(self.sVBoxSvcLogFile, 'log/debug/svc', 'Debug log file for VBoxSVC');
1971 self.sVBoxSvcLogFile = None;
1972
1973 if self.sSelfLogFile is not None and os.path.isfile(self.sSelfLogFile):
1974 reporter.addLogFile(self.sSelfLogFile, 'log/debug/client', 'Debug log file for the test driver');
1975 self.sSelfLogFile = None;
1976
1977 sVBoxSvcRelLog = os.path.join(self.sScratchPath, 'VBoxUserHome', 'VBoxSVC.log');
1978 if os.path.isfile(sVBoxSvcRelLog):
1979 reporter.addLogFile(sVBoxSvcRelLog, 'log/release/svc', 'Release log file for VBoxSVC');
1980 for sSuff in [ '.1', '.2', '.3', '.4', '.5', '.6', '.7', '.8' ]:
1981 if os.path.isfile(sVBoxSvcRelLog + sSuff):
1982 reporter.addLogFile(sVBoxSvcRelLog + sSuff, 'log/release/svc', 'Release log file for VBoxSVC');
1983
1984 # Finally, call the base driver to wipe the scratch space.
1985 fRc = base.TestDriver.actionCleanupAfter(self);
1986
1987 # Flag failure if the error count increased.
1988 if reporter.getErrorCount() > cErrorsEntry:
1989 fRc = False;
1990 return fRc;
1991
1992
1993 def actionAbort(self):
1994 """
1995 Terminate VBoxSVC if we've got a pid file.
1996 """
1997 #
1998 # Take default action first, then kill VBoxSVC. The other way around
1999 # is problematic since the testscript would continue running and possibly
2000 # trigger a new VBoxSVC to start.
2001 #
2002 fRc1 = base.TestDriver.actionAbort(self);
2003 fRc2 = self._killVBoxSVCByPidFile('%s/VBoxSVC.pid' % (self.sScratchPath,));
2004 return fRc1 is True and fRc2 is True;
2005
2006 def onExit(self, iRc):
2007 """
2008 Stop VBoxSVC if we've started it.
2009 """
2010 if self.oVBoxSvcProcess is not None:
2011 reporter.log('*** Shutting down the VBox API... (iRc=%s)' % (iRc,));
2012 self._powerOffAllVms();
2013 self._teardownVBoxApi();
2014 self._stopVBoxSVC();
2015 reporter.log('*** VBox API shutdown done.');
2016 return base.TestDriver.onExit(self, iRc);
2017
2018
2019 #
2020 # Task wait method override.
2021 #
2022
2023 def notifyAboutReadyTask(self, oTask):
2024 """
2025 Overriding base.TestDriver.notifyAboutReadyTask.
2026 """
2027 try:
2028 self.oVBoxMgr.interruptWaitEvents();
2029 reporter.log2('vbox.notifyAboutReadyTask: called interruptWaitEvents');
2030 except:
2031 reporter.logXcpt('vbox.notifyAboutReadyTask');
2032 return base.TestDriver.notifyAboutReadyTask(self, oTask);
2033
2034 def waitForTasksSleepWorker(self, cMsTimeout):
2035 """
2036 Overriding base.TestDriver.waitForTasksSleepWorker.
2037 """
2038 try:
2039 rc = self.oVBoxMgr.waitForEvents(int(cMsTimeout));
2040 _ = rc; #reporter.log2('vbox.waitForTasksSleepWorker(%u): true (waitForEvents -> %s)' % (cMsTimeout, rc));
2041 reporter.doPollWork('vbox.TestDriver.waitForTasksSleepWorker');
2042 return True;
2043 except KeyboardInterrupt:
2044 raise;
2045 except:
2046 reporter.logXcpt('vbox.waitForTasksSleepWorker');
2047 return False;
2048
2049 #
2050 # Utility methods.
2051 #
2052
2053 def processEvents(self, cMsTimeout = 0):
2054 """
2055 Processes events, returning after the first batch has been processed
2056 or the time limit has been reached.
2057
2058 Only Ctrl-C exception, no return.
2059 """
2060 try:
2061 self.oVBoxMgr.waitForEvents(cMsTimeout);
2062 except KeyboardInterrupt:
2063 raise;
2064 except:
2065 pass;
2066 return None;
2067
2068 def processPendingEvents(self):
2069 """ processEvents(0) - no waiting. """
2070 return self.processEvents(0);
2071
2072 def sleep(self, cSecs):
2073 """
2074 Sleep for a specified amount of time, processing XPCOM events all the while.
2075 """
2076 cMsTimeout = long(cSecs * 1000);
2077 msStart = base.timestampMilli();
2078 self.processEvents(0);
2079 while True:
2080 cMsElapsed = base.timestampMilli() - msStart;
2081 if cMsElapsed > cMsTimeout:
2082 break;
2083 #reporter.log2('cMsTimeout=%s - cMsElapsed=%d => %s' % (cMsTimeout, cMsElapsed, cMsTimeout - cMsElapsed));
2084 self.processEvents(cMsTimeout - cMsElapsed);
2085 return None;
2086
2087 def _logVmInfoUnsafe(self, oVM): # pylint: disable=too-many-statements,too-many-branches
2088 """
2089 Internal worker for logVmInfo that is wrapped in try/except.
2090 """
2091 reporter.log(" Name: %s" % (oVM.name,));
2092 reporter.log(" ID: %s" % (oVM.id,));
2093 oOsType = self.oVBox.getGuestOSType(oVM.OSTypeId);
2094 reporter.log(" OS Type: %s - %s" % (oVM.OSTypeId, oOsType.description,));
2095 reporter.log(" Machine state: %s" % (oVM.state,));
2096 reporter.log(" Session state: %s" % (oVM.sessionState,));
2097 if self.fpApiVer >= 4.2:
2098 reporter.log(" Session PID: %u (%#x)" % (oVM.sessionPID, oVM.sessionPID,));
2099 else:
2100 reporter.log(" Session PID: %u (%#x)" % (oVM.sessionPid, oVM.sessionPid,));
2101 if self.fpApiVer >= 5.0:
2102 reporter.log(" Session Name: %s" % (oVM.sessionName,));
2103 else:
2104 reporter.log(" Session Name: %s" % (oVM.sessionType,));
2105 reporter.log(" CPUs: %s" % (oVM.CPUCount,));
2106 reporter.log(" RAM: %sMB" % (oVM.memorySize,));
2107 if self.fpApiVer >= 6.1 and hasattr(oVM, 'graphicsAdapter'):
2108 reporter.log(" VRAM: %sMB" % (oVM.graphicsAdapter.VRAMSize,));
2109 reporter.log(" Monitors: %s" % (oVM.graphicsAdapter.monitorCount,));
2110 reporter.log(" GraphicsController: %s"
2111 % (self.oVBoxMgr.getEnumValueName('GraphicsControllerType', # pylint: disable=not-callable
2112 oVM.graphicsAdapter.graphicsControllerType),));
2113 else:
2114 reporter.log(" VRAM: %sMB" % (oVM.VRAMSize,));
2115 reporter.log(" Monitors: %s" % (oVM.monitorCount,));
2116 reporter.log(" GraphicsController: %s"
2117 % (self.oVBoxMgr.getEnumValueName('GraphicsControllerType', oVM.graphicsControllerType),)); # pylint: disable=not-callable
2118 reporter.log(" Chipset: %s" % (self.oVBoxMgr.getEnumValueName('ChipsetType', oVM.chipsetType),)); # pylint: disable=not-callable
2119 if self.fpApiVer >= 6.2 and hasattr(vboxcon, 'IommuType_None'):
2120 reporter.log(" IOMMU: %s" % (self.oVBoxMgr.getEnumValueName('IommuType', oVM.iommuType),)); # pylint: disable=not-callable
2121 reporter.log(" Firmware: %s" % (self.oVBoxMgr.getEnumValueName('FirmwareType', oVM.firmwareType),)); # pylint: disable=not-callable
2122 reporter.log(" HwVirtEx: %s" % (oVM.getHWVirtExProperty(vboxcon.HWVirtExPropertyType_Enabled),));
2123 reporter.log(" VPID support: %s" % (oVM.getHWVirtExProperty(vboxcon.HWVirtExPropertyType_VPID),));
2124 reporter.log(" Nested paging: %s" % (oVM.getHWVirtExProperty(vboxcon.HWVirtExPropertyType_NestedPaging),));
2125 atTypes = [
2126 ( 'CPUPropertyType_PAE', 'PAE: '),
2127 ( 'CPUPropertyType_LongMode', 'Long-mode: '),
2128 ( 'CPUPropertyType_HWVirt', 'Nested VT-x/AMD-V: '),
2129 ( 'CPUPropertyType_APIC', 'APIC: '),
2130 ( 'CPUPropertyType_X2APIC', 'X2APIC: '),
2131 ( 'CPUPropertyType_TripleFaultReset', 'TripleFaultReset: '),
2132 ( 'CPUPropertyType_IBPBOnVMExit', 'IBPBOnVMExit: '),
2133 ( 'CPUPropertyType_SpecCtrl', 'SpecCtrl: '),
2134 ( 'CPUPropertyType_SpecCtrlByHost', 'SpecCtrlByHost: '),
2135 ];
2136 for sEnumValue, sDesc in atTypes:
2137 if hasattr(vboxcon, sEnumValue):
2138 reporter.log(" %s%s" % (sDesc, oVM.getCPUProperty(getattr(vboxcon, sEnumValue)),));
2139 reporter.log(" ACPI: %s" % (oVM.BIOSSettings.ACPIEnabled,));
2140 reporter.log(" IO-APIC: %s" % (oVM.BIOSSettings.IOAPICEnabled,));
2141 if self.fpApiVer >= 3.2:
2142 if self.fpApiVer >= 4.2:
2143 reporter.log(" HPET: %s" % (oVM.HPETEnabled,));
2144 else:
2145 reporter.log(" HPET: %s" % (oVM.hpetEnabled,));
2146 if self.fpApiVer >= 6.1 and hasattr(oVM, 'graphicsAdapter'):
2147 reporter.log(" 3D acceleration: %s" % (oVM.graphicsAdapter.accelerate3DEnabled,));
2148 reporter.log(" 2D acceleration: %s" % (oVM.graphicsAdapter.accelerate2DVideoEnabled,));
2149 else:
2150 reporter.log(" 3D acceleration: %s" % (oVM.accelerate3DEnabled,));
2151 reporter.log(" 2D acceleration: %s" % (oVM.accelerate2DVideoEnabled,));
2152 reporter.log(" TeleporterEnabled: %s" % (oVM.teleporterEnabled,));
2153 reporter.log(" TeleporterPort: %s" % (oVM.teleporterPort,));
2154 reporter.log(" TeleporterAddress: %s" % (oVM.teleporterAddress,));
2155 reporter.log(" TeleporterPassword: %s" % (oVM.teleporterPassword,));
2156 reporter.log(" Clipboard mode: %s" % (oVM.clipboardMode,));
2157 if self.fpApiVer >= 5.0:
2158 reporter.log(" Drag and drop mode: %s" % (oVM.dnDMode,));
2159 elif self.fpApiVer >= 4.3:
2160 reporter.log(" Drag and drop mode: %s" % (oVM.dragAndDropMode,));
2161 if self.fpApiVer >= 4.0:
2162 reporter.log(" VRDP server: %s" % (oVM.VRDEServer.enabled,));
2163 try: sPorts = oVM.VRDEServer.getVRDEProperty("TCP/Ports");
2164 except: sPorts = "";
2165 reporter.log(" VRDP server ports: %s" % (sPorts,));
2166 reporter.log(" VRDP auth: %s (%s)" % (oVM.VRDEServer.authType, oVM.VRDEServer.authLibrary,));
2167 else:
2168 reporter.log(" VRDP server: %s" % (oVM.VRDPServer.enabled,));
2169 reporter.log(" VRDP server ports: %s" % (oVM.VRDPServer.ports,));
2170 reporter.log(" Last changed: %s" % (oVM.lastStateChange,));
2171
2172 aoControllers = self.oVBoxMgr.getArray(oVM, 'storageControllers')
2173 if aoControllers:
2174 reporter.log(" Controllers:");
2175 for oCtrl in aoControllers:
2176 reporter.log(" %s %s bus: %s type: %s" % (oCtrl.name, oCtrl.controllerType, oCtrl.bus, oCtrl.controllerType,));
2177 reporter.log(" AudioController: %s"
2178 % (self.oVBoxMgr.getEnumValueName('AudioControllerType', oVM.audioAdapter.audioController),)); # pylint: disable=not-callable
2179 reporter.log(" AudioEnabled: %s" % (oVM.audioAdapter.enabled,));
2180 reporter.log(" Host AudioDriver: %s"
2181 % (self.oVBoxMgr.getEnumValueName('AudioDriverType', oVM.audioAdapter.audioDriver),)); # pylint: disable=not-callable
2182
2183 self.processPendingEvents();
2184 aoAttachments = self.oVBoxMgr.getArray(oVM, 'mediumAttachments')
2185 if aoAttachments:
2186 reporter.log(" Attachments:");
2187 for oAtt in aoAttachments:
2188 sCtrl = "Controller: %s port: %s device: %s type: %s" % (oAtt.controller, oAtt.port, oAtt.device, oAtt.type);
2189 oMedium = oAtt.medium
2190 if oAtt.type == vboxcon.DeviceType_HardDisk:
2191 reporter.log(" %s: HDD" % sCtrl);
2192 reporter.log(" Id: %s" % (oMedium.id,));
2193 reporter.log(" Name: %s" % (oMedium.name,));
2194 reporter.log(" Format: %s" % (oMedium.format,));
2195 reporter.log(" Location: %s" % (oMedium.location,));
2196
2197 if oAtt.type == vboxcon.DeviceType_DVD:
2198 reporter.log(" %s: DVD" % sCtrl);
2199 if oMedium:
2200 reporter.log(" Id: %s" % (oMedium.id,));
2201 reporter.log(" Name: %s" % (oMedium.name,));
2202 if oMedium.hostDrive:
2203 reporter.log(" Host DVD %s" % (oMedium.location,));
2204 if oAtt.passthrough:
2205 reporter.log(" [passthrough mode]");
2206 else:
2207 reporter.log(" Virtual image: %s" % (oMedium.location,));
2208 reporter.log(" Size: %s" % (oMedium.size,));
2209 else:
2210 reporter.log(" empty");
2211
2212 if oAtt.type == vboxcon.DeviceType_Floppy:
2213 reporter.log(" %s: Floppy" % sCtrl);
2214 if oMedium:
2215 reporter.log(" Id: %s" % (oMedium.id,));
2216 reporter.log(" Name: %s" % (oMedium.name,));
2217 if oMedium.hostDrive:
2218 reporter.log(" Host floppy: %s" % (oMedium.location,));
2219 else:
2220 reporter.log(" Virtual image: %s" % (oMedium.location,));
2221 reporter.log(" Size: %s" % (oMedium.size,));
2222 else:
2223 reporter.log(" empty");
2224 self.processPendingEvents();
2225
2226 reporter.log(" Network Adapter:");
2227 for iSlot in range(0, 32):
2228 try: oNic = oVM.getNetworkAdapter(iSlot)
2229 except: break;
2230 if not oNic.enabled:
2231 reporter.log2(" slot #%d found but not enabled, skipping" % (iSlot,));
2232 continue;
2233 reporter.log(" slot #%d: type: %s (%s) MAC Address: %s lineSpeed: %s"
2234 % (iSlot, self.oVBoxMgr.getEnumValueName('NetworkAdapterType', oNic.adapterType), # pylint: disable=not-callable
2235 oNic.adapterType, oNic.MACAddress, oNic.lineSpeed) );
2236
2237 if oNic.attachmentType == vboxcon.NetworkAttachmentType_NAT:
2238 reporter.log(" attachmentType: NAT (%s)" % (oNic.attachmentType,));
2239 if self.fpApiVer >= 4.1:
2240 reporter.log(" nat-network: %s" % (oNic.NATNetwork,));
2241 elif oNic.attachmentType == vboxcon.NetworkAttachmentType_Bridged:
2242 reporter.log(" attachmentType: Bridged (%s)" % (oNic.attachmentType,));
2243 if self.fpApiVer >= 4.1:
2244 reporter.log(" hostInterface: %s" % (oNic.bridgedInterface,));
2245 else:
2246 reporter.log(" hostInterface: %s" % (oNic.hostInterface,));
2247 elif oNic.attachmentType == vboxcon.NetworkAttachmentType_Internal:
2248 reporter.log(" attachmentType: Internal (%s)" % (oNic.attachmentType,));
2249 reporter.log(" intnet-name: %s" % (oNic.internalNetwork,));
2250 elif oNic.attachmentType == vboxcon.NetworkAttachmentType_HostOnly:
2251 reporter.log(" attachmentType: HostOnly (%s)" % (oNic.attachmentType,));
2252 if self.fpApiVer >= 4.1:
2253 reporter.log(" hostInterface: %s" % (oNic.hostOnlyInterface,));
2254 else:
2255 reporter.log(" hostInterface: %s" % (oNic.hostInterface,));
2256 else:
2257 if self.fpApiVer >= 7.0:
2258 if oNic.attachmentType == vboxcon.NetworkAttachmentType_HostOnlyNetwork:
2259 reporter.log(" attachmentType: HostOnlyNetwork (%s)" % (oNic.attachmentType,));
2260 reporter.log(" hostonly-net: %s" % (oNic.hostOnlyNetwork,));
2261 elif self.fpApiVer >= 4.1:
2262 if oNic.attachmentType == vboxcon.NetworkAttachmentType_Generic:
2263 reporter.log(" attachmentType: Generic (%s)" % (oNic.attachmentType,));
2264 reporter.log(" generic-driver: %s" % (oNic.GenericDriver,));
2265 else:
2266 reporter.log(" attachmentType: unknown-%s" % (oNic.attachmentType,));
2267 else:
2268 reporter.log(" attachmentType: unknown-%s" % (oNic.attachmentType,));
2269 if oNic.traceEnabled:
2270 reporter.log(" traceFile: %s" % (oNic.traceFile,));
2271 self.processPendingEvents();
2272
2273 reporter.log(" Serial ports:");
2274 for iSlot in range(0, 8):
2275 try: oPort = oVM.getSerialPort(iSlot)
2276 except: break;
2277 if oPort is not None and oPort.enabled:
2278 enmHostMode = oPort.hostMode;
2279 reporter.log(" slot #%d: hostMode: %s (%s) I/O port: %s IRQ: %s server: %s path: %s" %
2280 (iSlot, self.oVBoxMgr.getEnumValueName('PortMode', enmHostMode), # pylint: disable=not-callable
2281 enmHostMode, oPort.IOBase, oPort.IRQ, oPort.server, oPort.path,) );
2282 self.processPendingEvents();
2283
2284 return True;
2285
2286 def logVmInfo(self, oVM): # pylint: disable=too-many-statements,too-many-branches
2287 """
2288 Logs VM configuration details.
2289
2290 This is copy, past, search, replace and edit of infoCmd from vboxshell.py.
2291 """
2292 try:
2293 fRc = self._logVmInfoUnsafe(oVM);
2294 except:
2295 reporter.logXcpt();
2296 fRc = False;
2297 return fRc;
2298
2299 def logVmInfoByName(self, sName):
2300 """
2301 logVmInfo + getVmByName.
2302 """
2303 return self.logVmInfo(self.getVmByName(sName));
2304
2305 def tryFindGuestOsId(self, sIdOrDesc):
2306 """
2307 Takes a guest OS ID or Description and returns the ID.
2308 If nothing matching it is found, the input is returned unmodified.
2309 """
2310
2311 if self.fpApiVer >= 4.0:
2312 if sIdOrDesc == 'Solaris (64 bit)':
2313 sIdOrDesc = 'Oracle Solaris 10 5/09 and earlier (64 bit)';
2314
2315 try:
2316 aoGuestTypes = self.oVBoxMgr.getArray(self.oVBox, 'GuestOSTypes');
2317 except:
2318 reporter.logXcpt();
2319 else:
2320 for oGuestOS in aoGuestTypes:
2321 try:
2322 sId = oGuestOS.id;
2323 sDesc = oGuestOS.description;
2324 except:
2325 reporter.logXcpt();
2326 else:
2327 if sIdOrDesc in (sId, sDesc,):
2328 sIdOrDesc = sId;
2329 break;
2330 self.processPendingEvents();
2331 return sIdOrDesc
2332
2333 def resourceFindVmHd(self, sVmName, sFlavor):
2334 """
2335 Search the test resources for the most recent VM HD.
2336
2337 Returns path relative to the test resource root.
2338 """
2339 ## @todo implement a proper search algo here.
2340 return '4.2/' + sFlavor + '/' + sVmName + '/t-' + sVmName + '.vdi';
2341
2342
2343 #
2344 # VM Api wrappers that logs errors, hides exceptions and other details.
2345 #
2346
2347 def createTestVMOnly(self, sName, sKind):
2348 """
2349 Creates and register a test VM without doing any kind of configuration.
2350
2351 Returns VM object (IMachine) on success, None on failure.
2352 """
2353 if not self.importVBoxApi():
2354 return None;
2355
2356 # create + register the VM
2357 try:
2358 if self.fpApiVer >= 4.2: # Introduces grouping (third parameter, empty for now).
2359 oVM = self.oVBox.createMachine("", sName, [], self.tryFindGuestOsId(sKind), "");
2360 elif self.fpApiVer >= 4.0:
2361 oVM = self.oVBox.createMachine("", sName, self.tryFindGuestOsId(sKind), "", False);
2362 elif self.fpApiVer >= 3.2:
2363 oVM = self.oVBox.createMachine(sName, self.tryFindGuestOsId(sKind), "", "", False);
2364 else:
2365 oVM = self.oVBox.createMachine(sName, self.tryFindGuestOsId(sKind), "", "");
2366 try:
2367 oVM.saveSettings();
2368 try:
2369 self.oVBox.registerMachine(oVM);
2370 return oVM;
2371 except:
2372 reporter.logXcpt();
2373 raise;
2374 except:
2375 reporter.logXcpt();
2376 if self.fpApiVer >= 4.0:
2377 try:
2378 if self.fpApiVer >= 4.3:
2379 oProgress = oVM.deleteConfig([]);
2380 else:
2381 oProgress = oVM.delete(None);
2382 self.waitOnProgress(oProgress);
2383 except:
2384 reporter.logXcpt();
2385 else:
2386 try: oVM.deleteSettings();
2387 except: reporter.logXcpt();
2388 raise;
2389 except:
2390 reporter.errorXcpt('failed to create vm "%s"' % (sName));
2391 return None;
2392
2393 # pylint: disable=too-many-arguments,too-many-locals,too-many-statements
2394 def createTestVM(self,
2395 sName,
2396 iGroup,
2397 sHd = None,
2398 cMbRam = None,
2399 cCpus = 1,
2400 fVirtEx = None,
2401 fNestedPaging = None,
2402 sDvdImage = None,
2403 sKind = "Other",
2404 fIoApic = None,
2405 fNstHwVirt = None,
2406 fPae = None,
2407 fFastBootLogo = True,
2408 eNic0Type = None,
2409 eNic0AttachType = None,
2410 sNic0NetName = 'default',
2411 sNic0MacAddr = 'grouped',
2412 sFloppy = None,
2413 fNatForwardingForTxs = None,
2414 sHddControllerType = 'IDE Controller',
2415 fVmmDevTestingPart = None,
2416 fVmmDevTestingMmio = False,
2417 sFirmwareType = 'bios',
2418 sChipsetType = 'piix3',
2419 sIommuType = 'none',
2420 sDvdControllerType = 'IDE Controller',
2421 sCom1RawFile = None):
2422 """
2423 Creates a test VM with a immutable HD from the test resources.
2424 """
2425 # create + register the VM
2426 oVM = self.createTestVMOnly(sName, sKind);
2427 if not oVM:
2428 return None;
2429
2430 # Configure the VM.
2431 fRc = True;
2432 oSession = self.openSession(oVM);
2433 if oSession is not None:
2434 fRc = oSession.setupPreferredConfig();
2435
2436 if fRc and cMbRam is not None :
2437 fRc = oSession.setRamSize(cMbRam);
2438 if fRc and cCpus is not None:
2439 fRc = oSession.setCpuCount(cCpus);
2440 if fRc and fVirtEx is not None:
2441 fRc = oSession.enableVirtEx(fVirtEx);
2442 if fRc and fNestedPaging is not None:
2443 fRc = oSession.enableNestedPaging(fNestedPaging);
2444 if fRc and fIoApic is not None:
2445 fRc = oSession.enableIoApic(fIoApic);
2446 if fRc and fNstHwVirt is not None:
2447 fRc = oSession.enableNestedHwVirt(fNstHwVirt);
2448 if fRc and fPae is not None:
2449 fRc = oSession.enablePae(fPae);
2450 if fRc and sDvdImage is not None:
2451 fRc = oSession.attachDvd(sDvdImage, sDvdControllerType);
2452 if fRc and sHd is not None:
2453 fRc = oSession.attachHd(sHd, sHddControllerType);
2454 if fRc and sFloppy is not None:
2455 fRc = oSession.attachFloppy(sFloppy);
2456 if fRc and eNic0Type is not None:
2457 fRc = oSession.setNicType(eNic0Type, 0);
2458 if fRc and (eNic0AttachType is not None or (sNic0NetName is not None and sNic0NetName != 'default')):
2459 fRc = oSession.setNicAttachment(eNic0AttachType, sNic0NetName, 0);
2460 if fRc and sNic0MacAddr is not None:
2461 if sNic0MacAddr == 'grouped':
2462 sNic0MacAddr = '%02X' % (iGroup);
2463 fRc = oSession.setNicMacAddress(sNic0MacAddr, 0);
2464 if fRc and fNatForwardingForTxs is True:
2465 fRc = oSession.setupNatForwardingForTxs();
2466 if fRc and fFastBootLogo is not None:
2467 fRc = oSession.setupBootLogo(fFastBootLogo);
2468 if fRc and self.fEnableVrdp:
2469 fRc = oSession.setupVrdp(True, self.uVrdpBasePort + iGroup);
2470 if fRc and fVmmDevTestingPart is not None:
2471 fRc = oSession.enableVmmDevTestingPart(fVmmDevTestingPart, fVmmDevTestingMmio);
2472 if fRc and sFirmwareType == 'bios':
2473 fRc = oSession.setFirmwareType(vboxcon.FirmwareType_BIOS);
2474 elif sFirmwareType == 'efi':
2475 fRc = oSession.setFirmwareType(vboxcon.FirmwareType_EFI);
2476 if fRc and self.fEnableDebugger:
2477 fRc = oSession.setExtraData('VBoxInternal/DBGC/Enabled', '1');
2478 if fRc and sChipsetType == 'piix3':
2479 fRc = oSession.setChipsetType(vboxcon.ChipsetType_PIIX3);
2480 elif sChipsetType == 'ich9':
2481 fRc = oSession.setChipsetType(vboxcon.ChipsetType_ICH9);
2482 if fRc and sCom1RawFile:
2483 fRc = oSession.setupSerialToRawFile(0, sCom1RawFile);
2484 if fRc and self.fpApiVer >= 6.2 and hasattr(vboxcon, 'IommuType_AMD') and sIommuType == 'amd':
2485 fRc = oSession.setIommuType(vboxcon.IommuType_AMD);
2486 elif fRc and self.fpApiVer >= 6.2 and hasattr(vboxcon, 'IommuType_Intel') and sIommuType == 'intel':
2487 fRc = oSession.setIommuType(vboxcon.IommuType_Intel);
2488
2489 if fRc: fRc = oSession.saveSettings();
2490 if not fRc: oSession.discardSettings(True);
2491 oSession.close();
2492 if not fRc:
2493 try: self.oVBox.unregisterMachine(oVM.id);
2494 except: pass;
2495 if self.fpApiVer >= 4.0:
2496 try:
2497 if self.fpApiVer >= 4.3:
2498 oProgress = oVM.deleteConfig([]);
2499 else:
2500 oProgress = oVM.delete(None);
2501 self.waitOnProgress(oProgress);
2502 except:
2503 reporter.logXcpt();
2504 else:
2505 try: oVM.deleteSettings();
2506 except: reporter.logXcpt();
2507 return None;
2508
2509 # success.
2510 reporter.log('created "%s" with name "%s"' % (oVM.id, sName));
2511 self.aoVMs.append(oVM);
2512 self.logVmInfo(oVM); # testing...
2513 return oVM;
2514 # pylint: enable=too-many-arguments,too-many-locals,too-many-statements
2515
2516 def createTestVmWithDefaults(self, # pylint: disable=too-many-arguments
2517 sName,
2518 iGroup,
2519 sKind,
2520 sDvdImage = None,
2521 fFastBootLogo = True,
2522 eNic0AttachType = None,
2523 sNic0NetName = 'default',
2524 sNic0MacAddr = 'grouped',
2525 fVmmDevTestingPart = None,
2526 fVmmDevTestingMmio = False,
2527 sCom1RawFile = None):
2528 """
2529 Creates a test VM with all defaults and no HDs.
2530 """
2531 # create + register the VM
2532 oVM = self.createTestVMOnly(sName, sKind);
2533 if oVM is not None:
2534 # Configure the VM with defaults according to sKind.
2535 fRc = True;
2536 oSession = self.openSession(oVM);
2537 if oSession is not None:
2538 if self.fpApiVer >= 6.0:
2539 try:
2540 oSession.o.machine.applyDefaults('');
2541 except:
2542 reporter.errorXcpt('failed to apply defaults to vm "%s"' % (sName,));
2543 fRc = False;
2544 else:
2545 reporter.error("Implement applyDefaults for vbox version %s" % (self.fpApiVer,));
2546 #fRc = oSession.setupPreferredConfig();
2547 fRc = False;
2548
2549 # Apply the specified configuration:
2550 if fRc and sDvdImage is not None:
2551 #fRc = oSession.insertDvd(sDvdImage); # attachDvd
2552 reporter.error('Implement: oSession.insertDvd(%s)' % (sDvdImage,));
2553 fRc = False;
2554
2555 if fRc and fFastBootLogo is not None:
2556 fRc = oSession.setupBootLogo(fFastBootLogo);
2557
2558 if fRc and (eNic0AttachType is not None or (sNic0NetName is not None and sNic0NetName != 'default')):
2559 fRc = oSession.setNicAttachment(eNic0AttachType, sNic0NetName, 0);
2560 if fRc and sNic0MacAddr is not None:
2561 if sNic0MacAddr == 'grouped':
2562 sNic0MacAddr = '%02X' % (iGroup,);
2563 fRc = oSession.setNicMacAddress(sNic0MacAddr, 0);
2564
2565 if fRc and fVmmDevTestingPart is not None:
2566 fRc = oSession.enableVmmDevTestingPart(fVmmDevTestingPart, fVmmDevTestingMmio);
2567
2568 if fRc and sCom1RawFile:
2569 fRc = oSession.setupSerialToRawFile(0, sCom1RawFile);
2570
2571 # Save the settings if we were successfull, otherwise discard them.
2572 if fRc:
2573 fRc = oSession.saveSettings();
2574 if not fRc:
2575 oSession.discardSettings(True);
2576 oSession.close();
2577
2578 if fRc is True:
2579 # If we've been successful, add the VM to the list and return it.
2580 # success.
2581 reporter.log('created "%s" with name "%s"' % (oVM.id, sName, ));
2582 self.aoVMs.append(oVM);
2583 self.logVmInfo(oVM); # testing...
2584 return oVM;
2585
2586 # Failed. Unregister the machine and delete it.
2587 try: self.oVBox.unregisterMachine(oVM.id);
2588 except: pass;
2589
2590 if self.fpApiVer >= 4.0:
2591 try:
2592 if self.fpApiVer >= 4.3:
2593 oProgress = oVM.deleteConfig([]);
2594 else:
2595 oProgress = oVM.delete(None);
2596 self.waitOnProgress(oProgress);
2597 except:
2598 reporter.logXcpt();
2599 else:
2600 try: oVM.deleteSettings();
2601 except: reporter.logXcpt();
2602 return None;
2603
2604 def addTestMachine(self, sNameOrId, fQuiet = False):
2605 """
2606 Adds an already existing (that is, configured) test VM to the
2607 test VM list.
2608 """
2609 # find + add the VM to the list.
2610 try:
2611 if self.fpApiVer >= 4.0:
2612 oVM = self.oVBox.findMachine(sNameOrId);
2613 else:
2614 reporter.error('fpApiVer=%s - did you remember to initialize the API' % (self.fpApiVer,));
2615 except:
2616 reporter.errorXcpt('could not find vm "%s"' % (sNameOrId,));
2617 return None;
2618
2619 self.aoVMs.append(oVM);
2620 if not fQuiet:
2621 reporter.log('Added "%s" with name "%s"' % (oVM.id, sNameOrId));
2622 self.logVmInfo(oVM);
2623 return oVM;
2624
2625 def openSession(self, oVM):
2626 """
2627 Opens a session for the VM. Returns the a Session wrapper object that
2628 will automatically close the session when the wrapper goes out of scope.
2629
2630 On failure None is returned and an error is logged.
2631 """
2632 try:
2633 sUuid = oVM.id;
2634 except:
2635 reporter.errorXcpt('failed to get the UUID for VM "%s"' % (oVM,));
2636 return None;
2637
2638 # This loop is a kludge to deal with us racing the closing of the
2639 # direct session of a previous VM run. See waitOnDirectSessionClose.
2640 for i in range(10):
2641 try:
2642 if self.fpApiVer <= 3.2:
2643 oSession = self.oVBoxMgr.openMachineSession(sUuid);
2644 else:
2645 oSession = self.oVBoxMgr.openMachineSession(oVM);
2646 break;
2647 except:
2648 if i == 9:
2649 reporter.errorXcpt('failed to open session for "%s" ("%s")' % (sUuid, oVM));
2650 return None;
2651 if i > 0:
2652 reporter.logXcpt('warning: failed to open session for "%s" ("%s") - retrying in %u secs' % (sUuid, oVM, i));
2653 self.waitOnDirectSessionClose(oVM, 5000 + i * 1000);
2654 from testdriver.vboxwrappers import SessionWrapper;
2655 return SessionWrapper(oSession, oVM, self.oVBox, self.oVBoxMgr, self, False);
2656
2657 #
2658 # Guest locations.
2659 #
2660
2661 @staticmethod
2662 def getGuestTempDir(oTestVm):
2663 """
2664 Helper for finding a temporary directory in the test VM.
2665
2666 Note! It may be necessary to create it!
2667 """
2668 if oTestVm.isWindows():
2669 return "C:\\Temp";
2670 if oTestVm.isOS2():
2671 return "C:\\Temp";
2672 return '/var/tmp';
2673
2674 @staticmethod
2675 def getGuestSystemDir(oTestVm, sPathPrefix = ''):
2676 """
2677 Helper for finding a system directory in the test VM that we can play around with.
2678 sPathPrefix can be used to specify other directories, such as /usr/local/bin/ or /usr/bin, for instance.
2679
2680 On Windows this is always the System32 directory, so this function can be used as
2681 basis for locating other files in or under that directory.
2682 """
2683 if oTestVm.isWindows():
2684 return oTestVm.pathJoin(TestDriver.getGuestWinDir(oTestVm), 'System32');
2685 if oTestVm.isOS2():
2686 return 'C:\\OS2\\DLL';
2687
2688 # OL / RHEL symlinks "/bin"/ to "/usr/bin". To avoid (unexpectedly) following symlinks, use "/usr/bin" then instead.
2689 if not sPathPrefix \
2690 and oTestVm.sKind in ('Oracle_64', 'Oracle'): ## @todo Does this apply for "RedHat" as well?
2691 return "/usr/bin";
2692
2693 return sPathPrefix + "/bin";
2694
2695 @staticmethod
2696 def getGuestSystemAdminDir(oTestVm, sPathPrefix = ''):
2697 """
2698 Helper for finding a system admin directory ("sbin") in the test VM that we can play around with.
2699 sPathPrefix can be used to specify other directories, such as /usr/local/sbin/ or /usr/sbin, for instance.
2700
2701 On Windows this is always the System32 directory, so this function can be used as
2702 basis for locating other files in or under that directory.
2703 On UNIX-y systems this always is the "sh" shell to guarantee a common shell syntax.
2704 """
2705 if oTestVm.isWindows():
2706 return oTestVm.pathJoin(TestDriver.getGuestWinDir(oTestVm), 'System32');
2707 if oTestVm.isOS2():
2708 return 'C:\\OS2\\DLL'; ## @todo r=andy Not sure here.
2709
2710 # OL / RHEL symlinks "/sbin"/ to "/usr/sbin". To avoid (unexpectedly) following symlinks, use "/usr/sbin" then instead.
2711 if not sPathPrefix \
2712 and oTestVm.sKind in ('Oracle_64', 'Oracle'): ## @todo Does this apply for "RedHat" as well?
2713 return "/usr/sbin";
2714
2715 return sPathPrefix + "/sbin";
2716
2717 @staticmethod
2718 def getGuestWinDir(oTestVm):
2719 """
2720 Helper for finding the Windows directory in the test VM that we can play around with.
2721 ASSUMES that we always install Windows on drive C.
2722
2723 Returns the Windows directory, or an empty string when executed on a non-Windows guest (asserts).
2724 """
2725 sWinDir = '';
2726 if oTestVm.isWindows():
2727 if oTestVm.sKind in ['WindowsNT4', 'WindowsNT3x',]:
2728 sWinDir = 'C:\\WinNT\\';
2729 else:
2730 sWinDir = 'C:\\Windows\\';
2731 assert sWinDir != '', 'Retrieving Windows directory for non-Windows OS';
2732 return sWinDir;
2733
2734 @staticmethod
2735 def getGuestSystemShell(oTestVm):
2736 """
2737 Helper for finding the default system shell in the test VM.
2738 """
2739 if oTestVm.isWindows():
2740 return TestDriver.getGuestSystemDir(oTestVm) + '\\cmd.exe';
2741 if oTestVm.isOS2():
2742 return TestDriver.getGuestSystemDir(oTestVm) + '\\..\\CMD.EXE';
2743 return "/bin/sh";
2744
2745 @staticmethod
2746 def getGuestSystemFileForReading(oTestVm):
2747 """
2748 Helper for finding a file in the test VM that we can read.
2749 """
2750 if oTestVm.isWindows():
2751 return TestDriver.getGuestSystemDir(oTestVm) + '\\ntdll.dll';
2752 if oTestVm.isOS2():
2753 return TestDriver.getGuestSystemDir(oTestVm) + '\\DOSCALL1.DLL';
2754 return "/bin/sh";
2755
2756 def getVmByName(self, sName):
2757 """
2758 Get a test VM by name. Returns None if not found, logged.
2759 """
2760 # Look it up in our 'cache'.
2761 for oVM in self.aoVMs:
2762 try:
2763 #reporter.log2('cur: %s / %s (oVM=%s)' % (oVM.name, oVM.id, oVM));
2764 if oVM.name == sName:
2765 return oVM;
2766 except:
2767 reporter.errorXcpt('failed to get the name from the VM "%s"' % (oVM));
2768
2769 # Look it up the standard way.
2770 return self.addTestMachine(sName, fQuiet = True);
2771
2772 def getVmByUuid(self, sUuid):
2773 """
2774 Get a test VM by uuid. Returns None if not found, logged.
2775 """
2776 # Look it up in our 'cache'.
2777 for oVM in self.aoVMs:
2778 try:
2779 if oVM.id == sUuid:
2780 return oVM;
2781 except:
2782 reporter.errorXcpt('failed to get the UUID from the VM "%s"' % (oVM));
2783
2784 # Look it up the standard way.
2785 return self.addTestMachine(sUuid, fQuiet = True);
2786
2787 def waitOnProgress(self, oProgress, cMsTimeout = 1000000, fErrorOnTimeout = True, cMsInterval = 1000):
2788 """
2789 Waits for a progress object to complete. Returns the status code.
2790 """
2791 # Wait for progress no longer than cMsTimeout time period.
2792 tsStart = datetime.datetime.now()
2793 while True:
2794 self.processPendingEvents();
2795 try:
2796 if oProgress.completed:
2797 break;
2798 except:
2799 return -1;
2800 self.processPendingEvents();
2801
2802 tsNow = datetime.datetime.now()
2803 tsDelta = tsNow - tsStart
2804 if ((tsDelta.microseconds + tsDelta.seconds * 1000000) // 1000) > cMsTimeout:
2805 if fErrorOnTimeout:
2806 reporter.errorTimeout('Timeout while waiting for progress.')
2807 return -1
2808
2809 reporter.doPollWork('vbox.TestDriver.waitOnProgress');
2810 try: oProgress.waitForCompletion(cMsInterval);
2811 except: return -2;
2812
2813 try: rc = oProgress.resultCode;
2814 except: rc = -2;
2815 self.processPendingEvents();
2816 return rc;
2817
2818 def waitOnDirectSessionClose(self, oVM, cMsTimeout):
2819 """
2820 Waits for the VM process to close it's current direct session.
2821
2822 Returns None.
2823 """
2824 # Get the original values so we're not subject to
2825 try:
2826 eCurState = oVM.sessionState;
2827 if self.fpApiVer >= 5.0:
2828 sCurName = sOrgName = oVM.sessionName;
2829 else:
2830 sCurName = sOrgName = oVM.sessionType;
2831 if self.fpApiVer >= 4.2:
2832 iCurPid = iOrgPid = oVM.sessionPID;
2833 else:
2834 iCurPid = iOrgPid = oVM.sessionPid;
2835 except Exception as oXcpt:
2836 if ComError.notEqual(oXcpt, ComError.E_ACCESSDENIED):
2837 reporter.logXcpt();
2838 self.processPendingEvents();
2839 return None;
2840 self.processPendingEvents();
2841
2842 msStart = base.timestampMilli();
2843 while iCurPid == iOrgPid \
2844 and sCurName == sOrgName \
2845 and sCurName != '' \
2846 and base.timestampMilli() - msStart < cMsTimeout \
2847 and eCurState in (vboxcon.SessionState_Unlocking, vboxcon.SessionState_Spawning, vboxcon.SessionState_Locked,):
2848 self.processEvents(1000);
2849 try:
2850 eCurState = oVM.sessionState;
2851 sCurName = oVM.sessionName if self.fpApiVer >= 5.0 else oVM.sessionType;
2852 iCurPid = oVM.sessionPID if self.fpApiVer >= 4.2 else oVM.sessionPid;
2853 except Exception as oXcpt:
2854 if ComError.notEqual(oXcpt, ComError.E_ACCESSDENIED):
2855 reporter.logXcpt();
2856 break;
2857 self.processPendingEvents();
2858 self.processPendingEvents();
2859 return None;
2860
2861 def uploadStartupLogFile(self, oVM, sVmName):
2862 """
2863 Uploads the VBoxStartup.log when present.
2864 """
2865 fRc = True;
2866 try:
2867 sLogFile = os.path.join(oVM.logFolder, 'VBoxHardening.log');
2868 except:
2869 reporter.logXcpt();
2870 fRc = False;
2871 else:
2872 if os.path.isfile(sLogFile):
2873 reporter.addLogFile(sLogFile, 'log/release/vm', '%s hardening log' % (sVmName, ),
2874 sAltName = '%s-%s' % (sVmName, os.path.basename(sLogFile),));
2875 return fRc;
2876
2877 def annotateAndUploadProcessReport(self, sProcessReport, sFilename, sKind, sDesc):
2878 """
2879 Annotates the given VM process report and uploads it if successfull.
2880 """
2881 fRc = False;
2882 if self.oBuild is not None and self.oBuild.sInstallPath is not None:
2883 oResolver = btresolver.BacktraceResolver(self.sScratchPath, self.oBuild.sInstallPath,
2884 self.getBuildOs(), self.getBuildArch(),
2885 fnLog = reporter.log);
2886 fRcTmp = oResolver.prepareEnv();
2887 if fRcTmp:
2888 reporter.log('Successfully prepared environment');
2889 sReportDbgSym = oResolver.annotateReport(sProcessReport);
2890 if sReportDbgSym is not None:
2891 reporter.addLogString(sReportDbgSym, sFilename, sKind, sDesc);
2892 fRc = True;
2893 else:
2894 reporter.log('Annotating report failed');
2895 oResolver.cleanupEnv();
2896 return fRc;
2897
2898 def startVmEx(self, oVM, fWait = True, sType = None, sName = None, asEnv = None): # pylint: disable=too-many-locals,too-many-statements
2899 """
2900 Start the VM, returning the VM session and progress object on success.
2901 The session is also added to the task list and to the aoRemoteSessions set.
2902
2903 asEnv is a list of string on the putenv() form.
2904
2905 On failure (None, None) is returned and an error is logged.
2906 """
2907 # Massage and check the input.
2908 if sType is None:
2909 sType = self.sSessionType;
2910 if sName is None:
2911 try: sName = oVM.name;
2912 except: sName = 'bad-vm-handle';
2913 reporter.log('startVmEx: sName=%s fWait=%s sType=%s' % (sName, fWait, sType));
2914 if oVM is None:
2915 return (None, None);
2916
2917 ## @todo Do this elsewhere.
2918 # Hack alert. Disables all annoying GUI popups.
2919 if sType == 'gui' and not self.aoRemoteSessions:
2920 try:
2921 self.oVBox.setExtraData('GUI/Input/AutoCapture', 'false');
2922 if self.fpApiVer >= 3.2:
2923 self.oVBox.setExtraData('GUI/LicenseAgreed', '8');
2924 else:
2925 self.oVBox.setExtraData('GUI/LicenseAgreed', '7');
2926 self.oVBox.setExtraData('GUI/RegistrationData', 'triesLeft=0');
2927 self.oVBox.setExtraData('GUI/SUNOnlineData', 'triesLeft=0');
2928 self.oVBox.setExtraData('GUI/SuppressMessages', 'confirmVMReset,remindAboutMouseIntegrationOn,'
2929 'remindAboutMouseIntegrationOff,remindAboutPausedVMInput,confirmInputCapture,'
2930 'confirmGoingFullscreen,remindAboutInaccessibleMedia,remindAboutWrongColorDepth,'
2931 'confirmRemoveMedium,allPopupPanes,allMessageBoxes,all');
2932 self.oVBox.setExtraData('GUI/UpdateDate', 'never');
2933 self.oVBox.setExtraData('GUI/PreventBetaWarning', self.oVBox.version);
2934 except:
2935 reporter.logXcpt();
2936
2937 if self.fpApiVer >= 7.0:
2938 # Needed to reach the host (localhost) from the guest. See xTracker #9896.
2939 for iSlot in range(0, 32):
2940 try:
2941 oNic = oVM.getNetworkAdapter(iSlot);
2942 if not oNic.enabled:
2943 continue;
2944 sAdpName = self.getNetworkAdapterNameFromType(oNic);
2945 if oNic.attachmentType == vboxcon.NetworkAttachmentType_NAT:
2946 reporter.log2('Enabling "LocalhostReachable" (NAT) for network adapter "%s" in slot %d' % \
2947 (sAdpName, iSlot));
2948 oNatEngine = oNic.NATEngine;
2949 oNatEngine.LocalhostReachable = True;
2950 else:
2951 # Other attachments will fail if 'LocalhostReachable' extra data override is present
2952 ## @todo r=andy Is this still needed, as we now have the API (see above) in place?
2953 sKey = 'VBoxInternal/Devices/%s/%d/LUN#0/Config/LocalhostReachable' % (sAdpName, iSlot);
2954 reporter.log2('Disabling "LocalhostReachable" (NAT) for network adapter "%s" in slot %d (key: %s)' % \
2955 (sAdpName, iSlot, sKey));
2956 self.oVBox.setExtraData(sKey, '');
2957 except:
2958 pass;
2959
2960 # The UUID for the name.
2961 try:
2962 sUuid = oVM.id;
2963 except:
2964 reporter.errorXcpt('failed to get the UUID for VM "%s"' % (oVM));
2965 return (None, None);
2966 self.processPendingEvents();
2967
2968 # Construct the environment.
2969 sLogFile = '%s/VM-%s.log' % (self.sScratchPath, sUuid);
2970 try: os.remove(sLogFile);
2971 except: pass;
2972 if self.sLogSessionDest:
2973 sLogDest = self.sLogSessionDest;
2974 else:
2975 sLogDest = 'file=%s' % (sLogFile,);
2976 asEnvFinal = [
2977 'VBOX_LOG=%s' % (self.sLogSessionGroups,),
2978 'VBOX_LOG_FLAGS=%s' % (self.sLogSessionFlags,),
2979 'VBOX_LOG_DEST=nodeny %s' % (sLogDest,),
2980 'VBOX_RELEASE_LOG_FLAGS=append time',
2981 ];
2982 if sType == 'gui':
2983 asEnvFinal.append('VBOX_GUI_DBG_ENABLED=1');
2984 if asEnv is not None and asEnv:
2985 asEnvFinal += asEnv;
2986
2987 # Shortcuts for local testing.
2988 oProgress = oWrapped = None;
2989 oTestVM = self.oTestVmSet.findTestVmByName(sName) if self.oTestVmSet is not None else None;
2990 try:
2991 if oTestVM is not None \
2992 and oTestVM.fSnapshotRestoreCurrent is True:
2993 if oVM.state is vboxcon.MachineState_Running:
2994 reporter.log2('Machine "%s" already running.' % (sName,));
2995 oProgress = None;
2996 oWrapped = self.openSession(oVM);
2997 else:
2998 reporter.log2('Checking if snapshot for machine "%s" exists.' % (sName,));
2999 oSessionWrapperRestore = self.openSession(oVM);
3000 if oSessionWrapperRestore is not None:
3001 oSnapshotCur = oVM.currentSnapshot;
3002 if oSnapshotCur is not None:
3003 reporter.log2('Restoring snapshot for machine "%s".' % (sName,));
3004 oSessionWrapperRestore.restoreSnapshot(oSnapshotCur);
3005 reporter.log2('Current snapshot for machine "%s" restored.' % (sName,));
3006 else:
3007 reporter.log('warning: no current snapshot for machine "%s" found.' % (sName,));
3008 oSessionWrapperRestore.close();
3009 except:
3010 reporter.errorXcpt();
3011 return (None, None);
3012
3013 # Open a remote session, wait for this operation to complete.
3014 # (The loop is a kludge to deal with us racing the closing of the
3015 # direct session of a previous VM run. See waitOnDirectSessionClose.)
3016 if oWrapped is None:
3017 for i in range(10):
3018 try:
3019 if self.fpApiVer < 4.3 \
3020 or (self.fpApiVer == 4.3 and not hasattr(self.oVBoxMgr, 'getSessionObject')):
3021 oSession = self.oVBoxMgr.mgr.getSessionObject(self.oVBox); # pylint: disable=no-member
3022 elif self.fpApiVer < 5.2 \
3023 or (self.fpApiVer == 5.2 and hasattr(self.oVBoxMgr, 'vbox')):
3024 oSession = self.oVBoxMgr.getSessionObject(self.oVBox); # pylint: disable=no-member
3025 else:
3026 oSession = self.oVBoxMgr.getSessionObject(); # pylint: disable=no-member,no-value-for-parameter
3027 if self.fpApiVer < 3.3:
3028 oProgress = self.oVBox.openRemoteSession(oSession, sUuid, sType, '\n'.join(asEnvFinal));
3029 else:
3030 if self.uApiRevision >= self.makeApiRevision(6, 1, 0, 1):
3031 oProgress = oVM.launchVMProcess(oSession, sType, asEnvFinal);
3032 else:
3033 oProgress = oVM.launchVMProcess(oSession, sType, '\n'.join(asEnvFinal));
3034 break;
3035 except:
3036 if i == 9:
3037 reporter.errorXcpt('failed to start VM "%s" ("%s"), aborting.' % (sUuid, sName));
3038 return (None, None);
3039 oSession = None;
3040 if i >= 0:
3041 reporter.logXcpt('warning: failed to start VM "%s" ("%s") - retrying in %u secs.' % (sUuid, oVM, i)); # pylint: disable=line-too-long
3042 self.waitOnDirectSessionClose(oVM, 5000 + i * 1000);
3043 if fWait and oProgress is not None:
3044 rc = self.waitOnProgress(oProgress);
3045 if rc < 0:
3046 self.waitOnDirectSessionClose(oVM, 5000);
3047
3048 # VM failed to power up, still collect VBox.log, need to wrap the session object
3049 # in order to use the helper for adding the log files to the report.
3050 from testdriver.vboxwrappers import SessionWrapper;
3051 oTmp = SessionWrapper(oSession, oVM, self.oVBox, self.oVBoxMgr, self, True, sName, sLogFile);
3052 oTmp.addLogsToReport();
3053
3054 # Try to collect a stack trace of the process for fruther investigation of any startup hangs.
3055 uPid = oTmp.getPid();
3056 if uPid is not None:
3057 sHostProcessInfoHung = utils.processGetInfo(uPid, fSudo = True);
3058 if sHostProcessInfoHung is not None:
3059 reporter.log('Trying to annotate the hung VM startup process report, please stand by...');
3060 fRcTmp = self.annotateAndUploadProcessReport(sHostProcessInfoHung, 'vmprocess-startup-hung.log',
3061 'process/report/vm', 'Annotated hung VM process state during startup'); # pylint: disable=line-too-long
3062 # Upload the raw log for manual annotation in case resolving failed.
3063 if not fRcTmp:
3064 reporter.log('Failed to annotate hung VM process report, uploading raw report');
3065 reporter.addLogString(sHostProcessInfoHung, 'vmprocess-startup-hung.log', 'process/report/vm',
3066 'Hung VM process state during startup');
3067
3068 try:
3069 if oSession is not None:
3070 oSession.close();
3071 except: pass;
3072 reportError(oProgress, 'failed to open session for "%s"' % (sName));
3073 self.uploadStartupLogFile(oVM, sName);
3074 return (None, None);
3075 reporter.log2('waitOnProgress -> %s' % (rc,));
3076
3077 # Wrap up the session object and push on to the list before returning it.
3078 if oWrapped is None:
3079 from testdriver.vboxwrappers import SessionWrapper;
3080 oWrapped = SessionWrapper(oSession, oVM, self.oVBox, self.oVBoxMgr, self, True, sName, sLogFile);
3081
3082 oWrapped.registerEventHandlerForTask();
3083 self.aoRemoteSessions.append(oWrapped);
3084 if oWrapped is not self.aoRemoteSessions[len(self.aoRemoteSessions) - 1]:
3085 reporter.error('not by reference: oWrapped=%s aoRemoteSessions[%s]=%s'
3086 % (oWrapped, len(self.aoRemoteSessions) - 1,
3087 self.aoRemoteSessions[len(self.aoRemoteSessions) - 1]));
3088 self.addTask(oWrapped);
3089
3090 reporter.log2('startVmEx: oSession=%s, oSessionWrapper=%s, oProgress=%s' % (oSession, oWrapped, oProgress));
3091
3092 from testdriver.vboxwrappers import ProgressWrapper;
3093 return (oWrapped, ProgressWrapper(oProgress, self.oVBoxMgr, self,
3094 'starting %s' % (sName,)) if oProgress else None);
3095
3096 def startVm(self, oVM, sType=None, sName = None, asEnv = None):
3097 """ Simplified version of startVmEx. """
3098 oSession, _ = self.startVmEx(oVM, True, sType, sName, asEnv = asEnv);
3099 return oSession;
3100
3101 def startVmByNameEx(self, sName, fWait=True, sType=None, asEnv = None):
3102 """
3103 Start the VM, returning the VM session and progress object on success.
3104 The session is also added to the task list and to the aoRemoteSessions set.
3105
3106 On failure (None, None) is returned and an error is logged.
3107 """
3108 oVM = self.getVmByName(sName);
3109 if oVM is None:
3110 return (None, None);
3111 return self.startVmEx(oVM, fWait, sType, sName, asEnv = asEnv);
3112
3113 def startVmByName(self, sName, sType=None, asEnv = None):
3114 """
3115 Start the VM, returning the VM session on success. The session is
3116 also added to the task list and to the aoRemoteSessions set.
3117
3118 On failure None is returned and an error is logged.
3119 """
3120 oSession, _ = self.startVmByNameEx(sName, True, sType, asEnv = asEnv);
3121 return oSession;
3122
3123 def terminateVmBySession(self, oSession, oProgress = None, fTakeScreenshot = None): # pylint: disable=too-many-statements
3124 """
3125 Terminates the VM specified by oSession and adds the release logs to
3126 the test report.
3127
3128 This will try achieve this by using powerOff, but will resort to
3129 tougher methods if that fails.
3130
3131 The session will always be removed from the task list.
3132 The session will be closed unless we fail to kill the process.
3133 The session will be removed from the remote session list if closed.
3134
3135 The progress object (a wrapper!) is for teleportation and similar VM
3136 operations, it will be attempted canceled before powering off the VM.
3137 Failures are logged but ignored.
3138 The progress object will always be removed from the task list.
3139
3140 Returns True if powerOff and session close both succeed.
3141 Returns False if on failure (logged), including when we successfully
3142 kill the VM process.
3143 """
3144 reporter.log2('terminateVmBySession: oSession=%s (pid=%s) oProgress=%s' % (oSession.sName, oSession.getPid(), oProgress));
3145
3146 # Call getPid first to make sure the PID is cached in the wrapper.
3147 oSession.getPid();
3148
3149 #
3150 # If the host is out of memory, just skip all the info collection as it
3151 # requires memory too and seems to wedge.
3152 #
3153 sHostProcessInfo = None;
3154 sHostProcessInfoHung = None;
3155 sLastScreenshotPath = None;
3156 sOsKernelLog = None;
3157 sVgaText = None;
3158 asMiscInfos = [];
3159
3160 if not oSession.fHostMemoryLow:
3161 # Try to fetch the VM process info before meddling with its state.
3162 if self.fAlwaysUploadLogs or reporter.testErrorCount() > 0:
3163 sHostProcessInfo = utils.processGetInfo(oSession.getPid(), fSudo = True);
3164
3165 #
3166 # Pause the VM if we're going to take any screenshots or dig into the
3167 # guest. Failures are quitely ignored.
3168 #
3169 if self.fAlwaysUploadLogs or reporter.testErrorCount() > 0:
3170 try:
3171 if oSession.oVM.state in [ vboxcon.MachineState_Running,
3172 vboxcon.MachineState_LiveSnapshotting,
3173 vboxcon.MachineState_Teleporting ]:
3174 oSession.o.console.pause();
3175 except:
3176 reporter.logXcpt();
3177
3178 #
3179 # Take Screenshot and upload it (see below) to Test Manager if appropriate/requested.
3180 #
3181 if fTakeScreenshot is True or self.fAlwaysUploadScreenshots or reporter.testErrorCount() > 0:
3182 sLastScreenshotPath = os.path.join(self.sScratchPath, "LastScreenshot-%s.png" % oSession.sName);
3183 fRc = oSession.takeScreenshot(sLastScreenshotPath);
3184 if fRc is not True:
3185 sLastScreenshotPath = None;
3186
3187 # Query the OS kernel log from the debugger if appropriate/requested.
3188 if self.fAlwaysUploadLogs or reporter.testErrorCount() > 0:
3189 sOsKernelLog = oSession.queryOsKernelLog();
3190
3191 # Do "info vgatext all" separately.
3192 if self.fAlwaysUploadLogs or reporter.testErrorCount() > 0:
3193 sVgaText = oSession.queryDbgInfoVgaText();
3194
3195 # Various infos (do after kernel because of symbols).
3196 if self.fAlwaysUploadLogs or reporter.testErrorCount() > 0:
3197 # Dump the guest stack for all CPUs.
3198 cCpus = oSession.getCpuCount();
3199 if cCpus > 0:
3200 for iCpu in xrange(0, cCpus):
3201 sThis = oSession.queryDbgGuestStack(iCpu);
3202 if sThis:
3203 asMiscInfos += [
3204 '================ start guest stack VCPU %s ================\n' % (iCpu,),
3205 sThis,
3206 '================ end guest stack VCPU %s ==================\n' % (iCpu,),
3207 ];
3208
3209 for sInfo, sArg in [ ('mode', 'all'),
3210 ('fflags', ''),
3211 ('cpumguest', 'verbose all'),
3212 ('cpumguestinstr', 'symbol all'),
3213 ('exits', ''),
3214 ('pic', ''),
3215 ('apic', ''),
3216 ('apiclvt', ''),
3217 ('apictimer', ''),
3218 ('ioapic', ''),
3219 ('pit', ''),
3220 ('phys', ''),
3221 ('clocks', ''),
3222 ('timers', ''),
3223 ('gdt', ''),
3224 ('ldt', ''),
3225 ]:
3226 if sInfo in ['apic',] and self.fpApiVer < 5.1: # asserts and burns
3227 continue;
3228 sThis = oSession.queryDbgInfo(sInfo, sArg);
3229 if sThis:
3230 if sThis[-1] != '\n':
3231 sThis += '\n';
3232 asMiscInfos += [
3233 '================ start %s %s ================\n' % (sInfo, sArg),
3234 sThis,
3235 '================ end %s %s ==================\n' % (sInfo, sArg),
3236 ];
3237
3238 #
3239 # Terminate the VM
3240 #
3241
3242 # Cancel the progress object if specified.
3243 if oProgress is not None:
3244 if not oProgress.isCompleted() and oProgress.isCancelable():
3245 reporter.log2('terminateVmBySession: canceling "%s"...' % (oProgress.sName));
3246 try:
3247 oProgress.o.cancel();
3248 except:
3249 reporter.logXcpt();
3250 else:
3251 oProgress.wait();
3252 self.removeTask(oProgress);
3253
3254 # Check if the VM has terminated by itself before powering it off.
3255 fClose = True;
3256 fRc = True;
3257 if oSession.needsPoweringOff():
3258 reporter.log('terminateVmBySession: powering off "%s"...' % (oSession.sName,));
3259 fRc = oSession.powerOff(fFudgeOnFailure = False);
3260 if fRc is not True:
3261 # power off failed, try terminate it in a nice manner.
3262 fRc = False;
3263 uPid = oSession.getPid();
3264 if uPid is not None:
3265 #
3266 # Collect some information about the VM process first to have
3267 # some state information for further investigation why powering off failed.
3268 #
3269 sHostProcessInfoHung = utils.processGetInfo(uPid, fSudo = True);
3270
3271 # Exterminate...
3272 reporter.error('terminateVmBySession: Terminating PID %u (VM %s)' % (uPid, oSession.sName));
3273 fClose = base.processTerminate(uPid);
3274 if fClose is True:
3275 self.waitOnDirectSessionClose(oSession.oVM, 5000);
3276 fClose = oSession.waitForTask(1000);
3277
3278 if fClose is not True:
3279 # Being nice failed...
3280 reporter.error('terminateVmBySession: Termination failed, trying to kill PID %u (VM %s) instead' \
3281 % (uPid, oSession.sName));
3282 fClose = base.processKill(uPid);
3283 if fClose is True:
3284 self.waitOnDirectSessionClose(oSession.oVM, 5000);
3285 fClose = oSession.waitForTask(1000);
3286 if fClose is not True:
3287 reporter.error('terminateVmBySession: Failed to kill PID %u (VM %s)' % (uPid, oSession.sName));
3288
3289 # The final steps.
3290 if fClose is True:
3291 reporter.log('terminateVmBySession: closing session "%s"...' % (oSession.sName,));
3292 oSession.close();
3293 self.waitOnDirectSessionClose(oSession.oVM, 10000);
3294 try:
3295 eState = oSession.oVM.state;
3296 except:
3297 reporter.logXcpt();
3298 else:
3299 if eState == vboxcon.MachineState_Aborted:
3300 reporter.error('terminateVmBySession: The VM "%s" aborted!' % (oSession.sName,));
3301 self.removeTask(oSession);
3302
3303 #
3304 # Add the release log, debug log and a screenshot of the VM to the test report.
3305 #
3306 if self.fAlwaysUploadLogs or reporter.testErrorCount() > 0:
3307 oSession.addLogsToReport();
3308
3309 # Add a screenshot if it has been requested and taken successfully.
3310 if sLastScreenshotPath is not None:
3311 if reporter.testErrorCount() > 0:
3312 reporter.addLogFile(sLastScreenshotPath, 'screenshot/failure', 'Last VM screenshot');
3313 else:
3314 reporter.addLogFile(sLastScreenshotPath, 'screenshot/success', 'Last VM screenshot');
3315
3316 # Add the guest OS log if it has been requested and taken successfully.
3317 if sOsKernelLog is not None:
3318 reporter.addLogString(sOsKernelLog, 'kernel.log', 'log/guest/kernel', 'Guest OS kernel log');
3319
3320 # Add "info vgatext all" if we've got it.
3321 if sVgaText is not None:
3322 reporter.addLogString(sVgaText, 'vgatext.txt', 'info/vgatext', 'info vgatext all');
3323
3324 # Add the "info xxxx" items if we've got any.
3325 if asMiscInfos:
3326 reporter.addLogString(u''.join(asMiscInfos), 'info.txt', 'info/collection', 'A bunch of info items.');
3327
3328 # Add the host process info if we were able to retrieve it.
3329 if sHostProcessInfo is not None:
3330 reporter.log('Trying to annotate the VM process report, please stand by...');
3331 fRcTmp = self.annotateAndUploadProcessReport(sHostProcessInfo, 'vmprocess.log',
3332 'process/report/vm', 'Annotated VM process state');
3333 # Upload the raw log for manual annotation in case resolving failed.
3334 if not fRcTmp:
3335 reporter.log('Failed to annotate VM process report, uploading raw report');
3336 reporter.addLogString(sHostProcessInfo, 'vmprocess.log', 'process/report/vm', 'VM process state');
3337
3338 # Add the host process info for failed power off attempts if we were able to retrieve it.
3339 if sHostProcessInfoHung is not None:
3340 reporter.log('Trying to annotate the hung VM process report, please stand by...');
3341 fRcTmp = self.annotateAndUploadProcessReport(sHostProcessInfoHung, 'vmprocess-hung.log',
3342 'process/report/vm', 'Annotated hung VM process state');
3343 # Upload the raw log for manual annotation in case resolving failed.
3344 if not fRcTmp:
3345 reporter.log('Failed to annotate hung VM process report, uploading raw report');
3346 fRcTmp = reporter.addLogString(sHostProcessInfoHung, 'vmprocess-hung.log', 'process/report/vm',
3347 'Hung VM process state');
3348 if not fRcTmp:
3349 try: reporter.log('******* START vmprocess-hung.log *******\n%s\n******* END vmprocess-hung.log *******\n'
3350 % (sHostProcessInfoHung,));
3351 except: pass; # paranoia
3352
3353
3354 return fRc;
3355
3356
3357 #
3358 # Some information query functions (mix).
3359 #
3360 # Methods require the VBox API. If the information is provided by both
3361 # the testboxscript as well as VBox API, we'll check if it matches.
3362 #
3363
3364 def _hasHostCpuFeature(self, sEnvVar, sEnum, fpApiMinVer, fQuiet):
3365 """
3366 Common Worker for hasHostNestedPaging() and hasHostHwVirt().
3367
3368 Returns True / False.
3369 Raises exception on environment / host mismatch.
3370 """
3371 fEnv = os.environ.get(sEnvVar, None);
3372 if fEnv is not None:
3373 fEnv = fEnv.lower() not in [ 'false', 'f', 'not', 'no', 'n', '0', ];
3374
3375 fVBox = None;
3376 self.importVBoxApi();
3377 if self.fpApiVer >= fpApiMinVer and hasattr(vboxcon, sEnum):
3378 try:
3379 fVBox = self.oVBox.host.getProcessorFeature(getattr(vboxcon, sEnum));
3380 except:
3381 if not fQuiet:
3382 reporter.logXcpt();
3383
3384 if fVBox is not None:
3385 if fEnv is not None:
3386 if fEnv != fVBox and not fQuiet:
3387 reporter.log('TestBox configuration overwritten: fVBox=%s (%s) vs. fEnv=%s (%s)'
3388 % (fVBox, sEnum, fEnv, sEnvVar));
3389 return fEnv;
3390 return fVBox;
3391 if fEnv is not None:
3392 return fEnv;
3393 return False;
3394
3395 def hasHostHwVirt(self, fQuiet = False):
3396 """
3397 Checks if hardware assisted virtualization is supported by the host.
3398
3399 Returns True / False.
3400 Raises exception on environment / host mismatch.
3401 """
3402 return self._hasHostCpuFeature('TESTBOX_HAS_HW_VIRT', 'ProcessorFeature_HWVirtEx', 3.1, fQuiet);
3403
3404 def hasHostNestedPaging(self, fQuiet = False):
3405 """
3406 Checks if nested paging is supported by the host.
3407
3408 Returns True / False.
3409 Raises exception on environment / host mismatch.
3410 """
3411 return self._hasHostCpuFeature('TESTBOX_HAS_NESTED_PAGING', 'ProcessorFeature_NestedPaging', 4.2, fQuiet) \
3412 and self.hasHostHwVirt(fQuiet);
3413
3414 def hasHostNestedHwVirt(self, fQuiet = False):
3415 """
3416 Checks if nested hardware-assisted virtualization is supported by the host.
3417
3418 Returns True / False.
3419 Raises exception on environment / host mismatch.
3420 """
3421 return self._hasHostCpuFeature('TESTBOX_HAS_NESTED_HWVIRT', 'ProcessorFeature_NestedHWVirt', 6.0, fQuiet) \
3422 and self.hasHostHwVirt(fQuiet);
3423
3424 def hasHostLongMode(self, fQuiet = False):
3425 """
3426 Checks if the host supports 64-bit guests.
3427
3428 Returns True / False.
3429 Raises exception on environment / host mismatch.
3430 """
3431 # Note that the testboxscript doesn't export this variable atm.
3432 return self._hasHostCpuFeature('TESTBOX_HAS_LONG_MODE', 'ProcessorFeature_LongMode', 3.1, fQuiet);
3433
3434 def getHostCpuCount(self, fQuiet = False):
3435 """
3436 Returns the number of CPUs on the host.
3437
3438 Returns True / False.
3439 Raises exception on environment / host mismatch.
3440 """
3441 cEnv = os.environ.get('TESTBOX_CPU_COUNT', None);
3442 if cEnv is not None:
3443 cEnv = int(cEnv);
3444
3445 try:
3446 cVBox = self.oVBox.host.processorOnlineCount;
3447 except:
3448 if not fQuiet:
3449 reporter.logXcpt();
3450 cVBox = None;
3451
3452 if cVBox is not None:
3453 if cEnv is not None:
3454 assert cVBox == cEnv, 'Misconfigured TestBox: VBox: %u CPUs, testboxscript: %u CPUs' % (cVBox, cEnv);
3455 return cVBox;
3456 if cEnv is not None:
3457 return cEnv;
3458 return 1;
3459
3460 def _getHostCpuDesc(self, fQuiet = False):
3461 """
3462 Internal method used for getting the host CPU description from VBoxSVC.
3463 Returns description string, on failure an empty string is returned.
3464 """
3465 try:
3466 return self.oVBox.host.getProcessorDescription(0);
3467 except:
3468 if not fQuiet:
3469 reporter.logXcpt();
3470 return '';
3471
3472 def isHostCpuAmd(self, fQuiet = False):
3473 """
3474 Checks if the host CPU vendor is AMD.
3475
3476 Returns True / False.
3477 """
3478 sCpuDesc = self._getHostCpuDesc(fQuiet);
3479 return 'AMD' in sCpuDesc or sCpuDesc == 'AuthenticAMD';
3480
3481 def isHostCpuIntel(self, fQuiet = False):
3482 """
3483 Checks if the host CPU vendor is Intel.
3484
3485 Returns True / False.
3486 """
3487 sCpuDesc = self._getHostCpuDesc(fQuiet);
3488 return sCpuDesc.startswith("Intel") or sCpuDesc == 'GenuineIntel';
3489
3490 def isHostCpuVia(self, fQuiet = False):
3491 """
3492 Checks if the host CPU vendor is VIA (or Centaur).
3493
3494 Returns True / False.
3495 """
3496 sCpuDesc = self._getHostCpuDesc(fQuiet);
3497 return sCpuDesc.startswith("VIA") or sCpuDesc == 'CentaurHauls';
3498
3499 def isHostCpuShanghai(self, fQuiet = False):
3500 """
3501 Checks if the host CPU vendor is Shanghai (or Zhaoxin).
3502
3503 Returns True / False.
3504 """
3505 sCpuDesc = self._getHostCpuDesc(fQuiet);
3506 return sCpuDesc.startswith("ZHAOXIN") or sCpuDesc.strip(' ') == 'Shanghai';
3507
3508 def isHostCpuP4(self, fQuiet = False):
3509 """
3510 Checks if the host CPU is a Pentium 4 / Pentium D.
3511
3512 Returns True / False.
3513 """
3514 if not self.isHostCpuIntel(fQuiet):
3515 return False;
3516
3517 (uFamilyModel, _, _, _) = self.oVBox.host.getProcessorCPUIDLeaf(0, 0x1, 0);
3518 return ((uFamilyModel >> 8) & 0xf) == 0xf;
3519
3520 def hasRawModeSupport(self, fQuiet = False):
3521 """
3522 Checks if raw-mode is supported by VirtualBox that the testbox is
3523 configured for it.
3524
3525 Returns True / False.
3526 Raises no exceptions.
3527
3528 Note! Differs from the rest in that we don't require the
3529 TESTBOX_WITH_RAW_MODE value to match the API. It is
3530 sometimes helpful to disable raw-mode on individual
3531 test boxes. (This probably goes for
3532 """
3533 # The environment variable can be used to disable raw-mode.
3534 fEnv = os.environ.get('TESTBOX_WITH_RAW_MODE', None);
3535 if fEnv is not None:
3536 fEnv = fEnv.lower() not in [ 'false', 'f', 'not', 'no', 'n', '0', ];
3537 if fEnv is False:
3538 return False;
3539
3540 # Starting with 5.0 GA / RC2 the API can tell us whether VBox was built
3541 # with raw-mode support or not.
3542 self.importVBoxApi();
3543 if self.fpApiVer >= 5.0:
3544 try:
3545 fVBox = self.oVBox.systemProperties.rawModeSupported;
3546 except:
3547 if not fQuiet:
3548 reporter.logXcpt();
3549 fVBox = True;
3550 if fVBox is False:
3551 return False;
3552
3553 return True;
3554
3555 #
3556 # Testdriver execution methods.
3557 #
3558
3559 def handleTask(self, oTask, sMethod):
3560 """
3561 Callback method for handling unknown tasks in the various run loops.
3562
3563 The testdriver should override this if it already tasks running when
3564 calling startVmAndConnectToTxsViaTcp, txsRunTest or similar methods.
3565 Call super to handle unknown tasks.
3566
3567 Returns True if handled, False if not.
3568 """
3569 reporter.error('%s: unknown task %s' % (sMethod, oTask));
3570 return False;
3571
3572 def txsDoTask(self, oSession, oTxsSession, fnAsync, aArgs):
3573 """
3574 Generic TXS task wrapper which waits both on the TXS and the session tasks.
3575
3576 Returns False on error, logged.
3577 Returns task result on success.
3578 """
3579 # All async methods ends with the following two args.
3580 cMsTimeout = aArgs[-2];
3581 fIgnoreErrors = aArgs[-1];
3582
3583 fRemoveVm = self.addTask(oSession);
3584 fRemoveTxs = self.addTask(oTxsSession);
3585
3586 rc = fnAsync(*aArgs); # pylint: disable=star-args
3587 if rc is True:
3588 rc = False;
3589 oTask = self.waitForTasks(cMsTimeout + 1);
3590 if oTask is oTxsSession:
3591 if oTxsSession.isSuccess():
3592 rc = oTxsSession.getResult();
3593 elif fIgnoreErrors is True:
3594 reporter.log( 'txsDoTask: task failed (%s)' % (oTxsSession.getLastReply()[1],));
3595 else:
3596 reporter.error('txsDoTask: task failed (%s)' % (oTxsSession.getLastReply()[1],));
3597 else:
3598 oTxsSession.cancelTask();
3599 if oTask is None:
3600 if fIgnoreErrors is True:
3601 reporter.log( 'txsDoTask: The task timed out.');
3602 else:
3603 reporter.errorTimeout('txsDoTask: The task timed out.');
3604 elif oTask is oSession:
3605 reporter.error('txsDoTask: The VM terminated unexpectedly');
3606 else:
3607 if fIgnoreErrors is True:
3608 reporter.log( 'txsDoTask: An unknown task %s was returned' % (oTask,));
3609 else:
3610 reporter.error('txsDoTask: An unknown task %s was returned' % (oTask,));
3611 else:
3612 reporter.error('txsDoTask: fnAsync returned %s' % (rc,));
3613
3614 if fRemoveTxs:
3615 self.removeTask(oTxsSession);
3616 if fRemoveVm:
3617 self.removeTask(oSession);
3618 return rc;
3619
3620 # pylint: disable=missing-docstring
3621
3622 def txsDisconnect(self, oSession, oTxsSession, cMsTimeout = 30000, fIgnoreErrors = False):
3623 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncDisconnect,
3624 (self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3625
3626 def txsVer(self, oSession, oTxsSession, cMsTimeout = 30000, fIgnoreErrors = False):
3627 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncVer,
3628 (self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3629
3630 def txsUuid(self, oSession, oTxsSession, cMsTimeout = 30000, fIgnoreErrors = False):
3631 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncUuid,
3632 (self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3633
3634 def txsMkDir(self, oSession, oTxsSession, sRemoteDir, fMode = 0o700, cMsTimeout = 30000, fIgnoreErrors = False):
3635 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncMkDir,
3636 (sRemoteDir, fMode, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3637
3638 def txsMkDirPath(self, oSession, oTxsSession, sRemoteDir, fMode = 0o700, cMsTimeout = 30000, fIgnoreErrors = False):
3639 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncMkDirPath,
3640 (sRemoteDir, fMode, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3641
3642 def txsMkSymlink(self, oSession, oTxsSession, sLinkTarget, sLink, cMsTimeout = 30000, fIgnoreErrors = False):
3643 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncMkSymlink,
3644 (sLinkTarget, sLink, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3645
3646 def txsRmDir(self, oSession, oTxsSession, sRemoteDir, cMsTimeout = 30000, fIgnoreErrors = False):
3647 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncRmDir,
3648 (sRemoteDir, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3649
3650 def txsRmFile(self, oSession, oTxsSession, sRemoteFile, cMsTimeout = 30000, fIgnoreErrors = False):
3651 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncRmFile,
3652 (sRemoteFile, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3653
3654 def txsRmSymlink(self, oSession, oTxsSession, sRemoteSymlink, cMsTimeout = 30000, fIgnoreErrors = False):
3655 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncRmSymlink,
3656 (sRemoteSymlink, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3657
3658 def txsRmTree(self, oSession, oTxsSession, sRemoteTree, cMsTimeout = 30000, fIgnoreErrors = False):
3659 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncRmTree,
3660 (sRemoteTree, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3661
3662 def txsIsDir(self, oSession, oTxsSession, sRemoteDir, cMsTimeout = 30000, fIgnoreErrors = False):
3663 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncIsDir,
3664 (sRemoteDir, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3665
3666 def txsIsFile(self, oSession, oTxsSession, sRemoteFile, cMsTimeout = 30000, fIgnoreErrors = False):
3667 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncIsFile,
3668 (sRemoteFile, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3669
3670 def txsIsSymlink(self, oSession, oTxsSession, sRemoteSymlink, cMsTimeout = 30000, fIgnoreErrors = False):
3671 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncIsSymlink,
3672 (sRemoteSymlink, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3673
3674 def txsUploadFile(self, oSession, oTxsSession, sLocalFile, sRemoteFile, cMsTimeout = 30000, fIgnoreErrors = False):
3675 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncUploadFile, \
3676 (sLocalFile, sRemoteFile, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3677
3678 def txsUploadString(self, oSession, oTxsSession, sContent, sRemoteFile, cMsTimeout = 30000, fIgnoreErrors = False):
3679 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncUploadString, \
3680 (sContent, sRemoteFile, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3681
3682 def txsDownloadFile(self, oSession, oTxsSession, sRemoteFile, sLocalFile, cMsTimeout = 30000, fIgnoreErrors = False):
3683 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncDownloadFile, \
3684 (sRemoteFile, sLocalFile, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3685
3686 def txsDownloadFiles(self, oSession, oTxsSession, aasFiles, fAddToLog = True, fIgnoreErrors = False):
3687 """
3688 Convenience function to get files from the guest, storing them in the
3689 scratch and adding them to the test result set (optional, but default).
3690
3691 The aasFiles parameter contains an array of with guest-path + host-path
3692 pairs, optionally a file 'kind', description and an alternative upload
3693 filename can also be specified.
3694
3695 Host paths are relative to the scratch directory or they must be given
3696 in absolute form. The guest path should be using guest path style.
3697
3698 Returns True on success.
3699 Returns False on failure (unless fIgnoreErrors is set), logged.
3700 """
3701 for asEntry in aasFiles:
3702 # Unpack:
3703 sGstFile = asEntry[0];
3704 sHstFile = asEntry[1];
3705 sKind = asEntry[2] if len(asEntry) > 2 and asEntry[2] else 'misc/other';
3706 sDescription = asEntry[3] if len(asEntry) > 3 and asEntry[3] else '';
3707 sAltName = asEntry[4] if len(asEntry) > 4 and asEntry[4] else None;
3708 assert len(asEntry) <= 5 and sGstFile and sHstFile;
3709 if not os.path.isabs(sHstFile):
3710 sHstFile = os.path.join(self.sScratchPath, sHstFile);
3711
3712 reporter.log2('Downloading file "%s" to "%s" ...' % (sGstFile, sHstFile,));
3713
3714 try: os.unlink(sHstFile); ## @todo txsDownloadFile doesn't truncate the output file.
3715 except: pass;
3716
3717 fRc = self.txsDownloadFile(oSession, oTxsSession, sGstFile, sHstFile, 30 * 1000, fIgnoreErrors);
3718 if fRc:
3719 if fAddToLog:
3720 reporter.addLogFile(sHstFile, sKind, sDescription, sAltName);
3721 else:
3722 if fIgnoreErrors is not True:
3723 return reporter.error('error downloading file "%s" to "%s"' % (sGstFile, sHstFile));
3724 reporter.log('warning: file "%s" was not downloaded, ignoring.' % (sGstFile,));
3725 return True;
3726
3727 def txsDownloadString(self, oSession, oTxsSession, sRemoteFile, sEncoding = 'utf-8', fIgnoreEncodingErrors = True,
3728 cMsTimeout = 30000, fIgnoreErrors = False):
3729 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncDownloadString,
3730 (sRemoteFile, sEncoding, fIgnoreEncodingErrors, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3731
3732 def txsPackFile(self, oSession, oTxsSession, sRemoteFile, sRemoteSource, cMsTimeout = 30000, fIgnoreErrors = False):
3733 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncPackFile, \
3734 (sRemoteFile, sRemoteSource, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3735
3736 def txsUnpackFile(self, oSession, oTxsSession, sRemoteFile, sRemoteDir, cMsTimeout = 30000, fIgnoreErrors = False):
3737 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncUnpackFile, \
3738 (sRemoteFile, sRemoteDir, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3739
3740 # pylint: enable=missing-docstring
3741
3742 def txsCdWait(self,
3743 oSession, # type: vboxwrappers.SessionWrapper
3744 oTxsSession, # type: txsclient.Session
3745 cMsTimeout = 30000, # type: int
3746 sFile = None # type: String
3747 ): # -> bool
3748 """
3749 Mostly an internal helper for txsRebootAndReconnectViaTcp and
3750 startVmAndConnectToTxsViaTcp that waits for the CDROM drive to become
3751 ready. It does this by polling for a file it knows to exist on the CD.
3752
3753 Returns True on success.
3754
3755 Returns False on failure, logged.
3756 """
3757
3758 if sFile is None:
3759 sFile = 'valkit.txt';
3760
3761 reporter.log('txsCdWait: Waiting for file "%s" to become available ...' % (sFile,));
3762
3763 fRemoveVm = self.addTask(oSession);
3764 fRemoveTxs = self.addTask(oTxsSession);
3765 cMsTimeout = self.adjustTimeoutMs(cMsTimeout);
3766 msStart = base.timestampMilli();
3767 cMsTimeout2 = cMsTimeout;
3768 fRc = oTxsSession.asyncIsFile('${CDROM}/%s' % (sFile,), cMsTimeout2);
3769 if fRc is True:
3770 while True:
3771 # wait for it to complete.
3772 oTask = self.waitForTasks(cMsTimeout2 + 1);
3773 if oTask is not oTxsSession:
3774 oTxsSession.cancelTask();
3775 if oTask is None:
3776 reporter.errorTimeout('txsCdWait: The task timed out (after %s ms).'
3777 % (base.timestampMilli() - msStart,));
3778 elif oTask is oSession:
3779 reporter.error('txsCdWait: The VM terminated unexpectedly');
3780 else:
3781 reporter.error('txsCdWait: An unknown task %s was returned' % (oTask,));
3782 fRc = False;
3783 break;
3784 if oTxsSession.isSuccess():
3785 break;
3786
3787 # Check for timeout.
3788 cMsElapsed = base.timestampMilli() - msStart;
3789 if cMsElapsed >= cMsTimeout:
3790 reporter.error('txsCdWait: timed out');
3791 fRc = False;
3792 break;
3793 # delay.
3794 self.sleep(1);
3795
3796 # resubmit the task.
3797 cMsTimeout2 = msStart + cMsTimeout - base.timestampMilli();
3798 if cMsTimeout2 < 500:
3799 cMsTimeout2 = 500;
3800 fRc = oTxsSession.asyncIsFile('${CDROM}/%s' % (sFile,), cMsTimeout2);
3801 if fRc is not True:
3802 reporter.error('txsCdWait: asyncIsFile failed');
3803 break;
3804 else:
3805 reporter.error('txsCdWait: asyncIsFile failed');
3806
3807 if not fRc:
3808 # Do some diagnosis to find out why this failed.
3809 ## @todo Identify guest OS type and only run one of the following commands.
3810 fIsNotWindows = True;
3811 reporter.log('txsCdWait: Listing root contents of ${CDROM}:');
3812 if fIsNotWindows:
3813 reporter.log('txsCdWait: Tiggering udevadm ...');
3814 oTxsSession.syncExec("/sbin/udevadm", ("/sbin/udevadm", "trigger", "--verbose"), fIgnoreErrors = True);
3815 time.sleep(15);
3816 oTxsSession.syncExec("/bin/ls", ("/bin/ls", "-al", "${CDROM}"), fIgnoreErrors = True);
3817 reporter.log('txsCdWait: Listing media directory:');
3818 oTxsSession.syncExec('/bin/ls', ('/bin/ls', '-l', '-a', '-R', '/media'), fIgnoreErrors = True);
3819 reporter.log('txsCdWait: Listing mount points / drives:');
3820 oTxsSession.syncExec('/bin/mount', ('/bin/mount',), fIgnoreErrors = True);
3821 oTxsSession.syncExec('/bin/cat', ('/bin/cat', '/etc/fstab'), fIgnoreErrors = True);
3822 oTxsSession.syncExec('/bin/dmesg', ('/bin/dmesg',), fIgnoreErrors = True);
3823 oTxsSession.syncExec('/usr/bin/lshw', ('/usr/bin/lshw', '-c', 'disk'), fIgnoreErrors = True);
3824 oTxsSession.syncExec('/bin/journalctl',
3825 ('/bin/journalctl', '-x', '-b'), fIgnoreErrors = True);
3826 oTxsSession.syncExec('/bin/journalctl',
3827 ('/bin/journalctl', '-x', '-b', '/usr/lib/udisks2/udisksd'), fIgnoreErrors = True);
3828 oTxsSession.syncExec('/usr/bin/udisksctl',
3829 ('/usr/bin/udisksctl', 'info', '-b', '/dev/sr0'), fIgnoreErrors = True);
3830 oTxsSession.syncExec('/bin/systemctl',
3831 ('/bin/systemctl', 'status', 'udisks2'), fIgnoreErrors = True);
3832 oTxsSession.syncExec('/bin/ps',
3833 ('/bin/ps', '-a', '-u', '-x'), fIgnoreErrors = True);
3834 reporter.log('txsCdWait: Mounting manually ...');
3835 for _ in range(3):
3836 oTxsSession.syncExec('/bin/mount', ('/bin/mount', '/dev/sr0', '${CDROM}'), fIgnoreErrors = True);
3837 time.sleep(5);
3838 reporter.log('txsCdWait: Re-Listing media directory:');
3839 oTxsSession.syncExec('/bin/ls', ('/bin/ls', '-l', '-a', '-R', '/media'), fIgnoreErrors = True);
3840 else:
3841 # ASSUMES that we always install Windows on drive C right now.
3842 sWinDir = "C:\\Windows\\System32\\";
3843 # Should work since WinXP Pro.
3844 oTxsSession.syncExec(sWinDir + "wbem\\WMIC.exe",
3845 ("WMIC.exe", "logicaldisk", "get",
3846 "deviceid, volumename, description"),
3847 fIgnoreErrors = True);
3848 oTxsSession.syncExec(sWinDir + " cmd.exe",
3849 ('cmd.exe', '/C', 'dir', '${CDROM}'),
3850 fIgnoreErrors = True);
3851
3852 if fRemoveTxs:
3853 self.removeTask(oTxsSession);
3854 if fRemoveVm:
3855 self.removeTask(oSession);
3856 return fRc;
3857
3858 def txsDoConnectViaTcp(self, oSession, cMsTimeout, fNatForwardingForTxs = False):
3859 """
3860 Mostly an internal worker for connecting to TXS via TCP used by the
3861 *ViaTcp methods.
3862
3863 Returns a tuplet with True/False and TxsSession/None depending on the
3864 result. Errors are logged.
3865 """
3866
3867 reporter.log2('txsDoConnectViaTcp: oSession=%s, cMsTimeout=%s, fNatForwardingForTxs=%s'
3868 % (oSession, cMsTimeout, fNatForwardingForTxs));
3869
3870 cMsTimeout = self.adjustTimeoutMs(cMsTimeout);
3871 oTxsConnect = oSession.txsConnectViaTcp(cMsTimeout, fNatForwardingForTxs = fNatForwardingForTxs);
3872 if oTxsConnect is not None:
3873 self.addTask(oTxsConnect);
3874 fRemoveVm = self.addTask(oSession);
3875 oTask = self.waitForTasks(cMsTimeout + 1);
3876 reporter.log2('txsDoConnectViaTcp: waitForTasks returned %s' % (oTask,));
3877 self.removeTask(oTxsConnect);
3878 if oTask is oTxsConnect:
3879 oTxsSession = oTxsConnect.getResult();
3880 if oTxsSession is not None:
3881 reporter.log('txsDoConnectViaTcp: Connected to TXS on %s.' % (oTxsSession.oTransport.sHostname,));
3882 return (True, oTxsSession);
3883
3884 reporter.error('txsDoConnectViaTcp: failed to connect to TXS.');
3885 else:
3886 oTxsConnect.cancelTask();
3887 if oTask is None:
3888 reporter.errorTimeout('txsDoConnectViaTcp: connect stage 1 timed out');
3889 elif oTask is oSession:
3890 oSession.reportPrematureTermination('txsDoConnectViaTcp: ');
3891 else:
3892 reporter.error('txsDoConnectViaTcp: unknown/wrong task %s' % (oTask,));
3893 if fRemoveVm:
3894 self.removeTask(oSession);
3895 else:
3896 reporter.error('txsDoConnectViaTcp: txsConnectViaTcp failed');
3897 return (False, None);
3898
3899 def startVmAndConnectToTxsViaTcp(self, sVmName, fCdWait = False, cMsTimeout = 15*60000, \
3900 cMsCdWait = 30000, sFileCdWait = None, \
3901 fNatForwardingForTxs = False):
3902 """
3903 Starts the specified VM and tries to connect to its TXS via TCP.
3904 The VM will be powered off if TXS doesn't respond before the specified
3905 time has elapsed.
3906
3907 Returns a the VM and TXS sessions (a two tuple) on success. The VM
3908 session is in the task list, the TXS session is not.
3909 Returns (None, None) on failure, fully logged.
3910 """
3911
3912 # Zap the guest IP to make sure we're not getting a stale entry
3913 # (unless we're restoring the VM of course).
3914 oTestVM = self.oTestVmSet.findTestVmByName(sVmName) if self.oTestVmSet is not None else None;
3915 if oTestVM is None \
3916 or oTestVM.fSnapshotRestoreCurrent is False:
3917 try:
3918 oSession1 = self.openSession(self.getVmByName(sVmName));
3919 oSession1.delGuestPropertyValue('/VirtualBox/GuestInfo/Net/0/V4/IP');
3920 oSession1.saveSettings(True);
3921 del oSession1;
3922 except:
3923 reporter.logXcpt();
3924
3925 # Start the VM.
3926 reporter.log('startVmAndConnectToTxsViaTcp: Starting(/preparing) "%s" (timeout %s s)...' % (sVmName, cMsTimeout / 1000));
3927 reporter.flushall();
3928 oSession = self.startVmByName(sVmName);
3929 if oSession is not None:
3930 # Connect to TXS.
3931 reporter.log2('startVmAndConnectToTxsViaTcp: Started(/prepared) "%s", connecting to TXS ...' % (sVmName,));
3932 (fRc, oTxsSession) = self.txsDoConnectViaTcp(oSession, cMsTimeout, fNatForwardingForTxs);
3933 if fRc is True:
3934 if fCdWait:
3935 # Wait for CD?
3936 reporter.log2('startVmAndConnectToTxsViaTcp: Waiting for file "%s" to become available ...' % (sFileCdWait,));
3937 fRc = self.txsCdWait(oSession, oTxsSession, cMsCdWait, sFileCdWait);
3938 if fRc is not True:
3939 reporter.error('startVmAndConnectToTxsViaTcp: txsCdWait failed');
3940
3941 sVer = self.txsVer(oSession, oTxsSession, cMsTimeout, fIgnoreErrors = True);
3942 if sVer is not False:
3943 reporter.log('startVmAndConnectToTxsViaTcp: TestExecService version %s' % (sVer,));
3944 else:
3945 reporter.log('startVmAndConnectToTxsViaTcp: Unable to retrieve TestExecService version');
3946
3947 if fRc is True:
3948 # Success!
3949 return (oSession, oTxsSession);
3950 else:
3951 reporter.error('startVmAndConnectToTxsViaTcp: txsDoConnectViaTcp failed');
3952 # If something went wrong while waiting for TXS to be started - take VM screenshot before terminate it
3953 self.terminateVmBySession(oSession);
3954 return (None, None);
3955
3956 def txsRebootAndReconnectViaTcp(self, oSession, oTxsSession, fCdWait = False, cMsTimeout = 15*60000, \
3957 cMsCdWait = 30000, sFileCdWait = None, fNatForwardingForTxs = False):
3958 """
3959 Executes the TXS reboot command
3960
3961 Returns A tuple of True and the new TXS session on success.
3962
3963 Returns A tuple of False and either the old TXS session or None on failure.
3964 """
3965 reporter.log2('txsRebootAndReconnect: cMsTimeout=%u' % (cMsTimeout,));
3966
3967 #
3968 # This stuff is a bit complicated because of rebooting being kind of
3969 # disruptive to the TXS and such... The protocol is that TXS will:
3970 # - ACK the reboot command.
3971 # - Shutdown the transport layer, implicitly disconnecting us.
3972 # - Execute the reboot operation.
3973 # - On failure, it will be re-init the transport layer and be
3974 # available pretty much immediately. UUID unchanged.
3975 # - On success, it will be respawed after the reboot (hopefully),
3976 # with a different UUID.
3977 #
3978 fRc = False;
3979 iStart = base.timestampMilli();
3980
3981 # Get UUID.
3982 cMsTimeout2 = min(60000, cMsTimeout);
3983 sUuidBefore = self.txsUuid(oSession, oTxsSession, self.adjustTimeoutMs(cMsTimeout2, 60000));
3984 if sUuidBefore is not False:
3985 # Reboot.
3986 cMsElapsed = base.timestampMilli() - iStart;
3987 cMsTimeout2 = cMsTimeout - cMsElapsed;
3988 fRc = self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncReboot,
3989 (self.adjustTimeoutMs(cMsTimeout2, 60000), False));
3990 if fRc is True:
3991 # Reconnect.
3992 if fNatForwardingForTxs is True:
3993 self.sleep(22); # NAT fudge - Two fixes are wanted: 1. TXS connect retries. 2. Main API reboot/reset hint.
3994 cMsElapsed = base.timestampMilli() - iStart;
3995 (fRc, oTxsSession) = self.txsDoConnectViaTcp(oSession, cMsTimeout - cMsElapsed, fNatForwardingForTxs);
3996 if fRc is True:
3997 # Check the UUID.
3998 cMsElapsed = base.timestampMilli() - iStart;
3999 cMsTimeout2 = min(60000, cMsTimeout - cMsElapsed);
4000 sUuidAfter = self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncUuid,
4001 (self.adjustTimeoutMs(cMsTimeout2, 60000), False));
4002 if sUuidBefore is not False:
4003 if sUuidAfter != sUuidBefore:
4004 reporter.log('The guest rebooted (UUID %s -> %s)' % (sUuidBefore, sUuidAfter))
4005
4006 # Do CD wait if specified.
4007 if fCdWait:
4008 fRc = self.txsCdWait(oSession, oTxsSession, cMsCdWait, sFileCdWait);
4009 if fRc is not True:
4010 reporter.error('txsRebootAndReconnectViaTcp: txsCdWait failed');
4011
4012 sVer = self.txsVer(oSession, oTxsSession, cMsTimeout, fIgnoreErrors = True);
4013 if sVer is not False:
4014 reporter.log('txsRebootAndReconnectViaTcp: TestExecService version %s' % (sVer,));
4015 else:
4016 reporter.log('txsRebootAndReconnectViaTcp: Unable to retrieve TestExecService version');
4017 else:
4018 reporter.error('txsRebootAndReconnectViaTcp: failed to get UUID (after)');
4019 else:
4020 reporter.error('txsRebootAndReconnectViaTcp: did not reboot (UUID %s)' % (sUuidBefore,));
4021 else:
4022 reporter.error('txsRebootAndReconnectViaTcp: txsDoConnectViaTcp failed');
4023 else:
4024 reporter.error('txsRebootAndReconnectViaTcp: reboot failed');
4025 else:
4026 reporter.error('txsRebootAndReconnectViaTcp: failed to get UUID (before)');
4027 return (fRc, oTxsSession);
4028
4029 # pylint: disable=too-many-locals,too-many-arguments
4030
4031 def txsRunTest(self, oTxsSession, sTestName, cMsTimeout, sExecName, asArgs = (), asAddEnv = (), sAsUser = "",
4032 fCheckSessionStatus = False):
4033 """
4034 Executes the specified test task, waiting till it completes or times out.
4035
4036 The VM session (if any) must be in the task list.
4037
4038 Returns True if we executed the task and nothing abnormal happend.
4039 Query the process status from the TXS session.
4040
4041 Returns False if some unexpected task was signalled or we failed to
4042 submit the job.
4043
4044 If fCheckSessionStatus is set to True, the overall session status will be
4045 taken into account and logged as an error on failure.
4046 """
4047 reporter.testStart(sTestName);
4048 reporter.log2('txsRunTest: cMsTimeout=%u sExecName=%s asArgs=%s' % (cMsTimeout, sExecName, asArgs));
4049
4050 # Submit the job.
4051 fRc = False;
4052 if oTxsSession.asyncExec(sExecName, asArgs, asAddEnv, sAsUser, cMsTimeout = self.adjustTimeoutMs(cMsTimeout)):
4053 self.addTask(oTxsSession);
4054
4055 # Wait for the job to complete.
4056 while True:
4057 oTask = self.waitForTasks(cMsTimeout + 1);
4058 if oTask is None:
4059 if fCheckSessionStatus:
4060 reporter.error('txsRunTest: waitForTasks for test "%s" timed out' % (sTestName,));
4061 else:
4062 reporter.log('txsRunTest: waitForTasks for test "%s" timed out' % (sTestName,));
4063 break;
4064 if oTask is oTxsSession:
4065 if fCheckSessionStatus \
4066 and not oTxsSession.isSuccess():
4067 reporter.error('txsRunTest: Test "%s" failed' % (sTestName,));
4068 else:
4069 fRc = True;
4070 reporter.log('txsRunTest: isSuccess=%s getResult=%s' \
4071 % (oTxsSession.isSuccess(), oTxsSession.getResult()));
4072 break;
4073 if not self.handleTask(oTask, 'txsRunTest'):
4074 break;
4075
4076 self.removeTask(oTxsSession);
4077 if not oTxsSession.pollTask():
4078 oTxsSession.cancelTask();
4079 else:
4080 reporter.error('txsRunTest: asyncExec failed');
4081
4082 reporter.testDone();
4083 return fRc;
4084
4085 def txsRunTestRedirectStd(self, oTxsSession, sTestName, cMsTimeout, sExecName, asArgs = (), asAddEnv = (), sAsUser = "",
4086 oStdIn = '/dev/null', oStdOut = '/dev/null', oStdErr = '/dev/null', oTestPipe = '/dev/null'):
4087 """
4088 Executes the specified test task, waiting till it completes or times out,
4089 redirecting stdin, stdout and stderr to the given objects.
4090
4091 The VM session (if any) must be in the task list.
4092
4093 Returns True if we executed the task and nothing abnormal happend.
4094 Query the process status from the TXS session.
4095
4096 Returns False if some unexpected task was signalled or we failed to
4097 submit the job.
4098 """
4099 reporter.testStart(sTestName);
4100 reporter.log2('txsRunTestRedirectStd: cMsTimeout=%u sExecName=%s asArgs=%s' % (cMsTimeout, sExecName, asArgs));
4101
4102 # Submit the job.
4103 fRc = False;
4104 if oTxsSession.asyncExecEx(sExecName, asArgs, asAddEnv, oStdIn, oStdOut, oStdErr,
4105 oTestPipe, sAsUser, cMsTimeout = self.adjustTimeoutMs(cMsTimeout)):
4106 self.addTask(oTxsSession);
4107
4108 # Wait for the job to complete.
4109 while True:
4110 oTask = self.waitForTasks(cMsTimeout + 1);
4111 if oTask is None:
4112 reporter.log('txsRunTestRedirectStd: waitForTasks timed out');
4113 break;
4114 if oTask is oTxsSession:
4115 fRc = True;
4116 reporter.log('txsRunTestRedirectStd: isSuccess=%s getResult=%s'
4117 % (oTxsSession.isSuccess(), oTxsSession.getResult()));
4118 break;
4119 if not self.handleTask(oTask, 'txsRunTestRedirectStd'):
4120 break;
4121
4122 self.removeTask(oTxsSession);
4123 if not oTxsSession.pollTask():
4124 oTxsSession.cancelTask();
4125 else:
4126 reporter.error('txsRunTestRedirectStd: asyncExec failed');
4127
4128 reporter.testDone();
4129 return fRc;
4130
4131 def txsRunTest2(self, oTxsSession1, oTxsSession2, sTestName, cMsTimeout,
4132 sExecName1, asArgs1,
4133 sExecName2, asArgs2,
4134 asAddEnv1 = (), sAsUser1 = '', fWithTestPipe1 = True,
4135 asAddEnv2 = (), sAsUser2 = '', fWithTestPipe2 = True):
4136 """
4137 Executes the specified test tasks, waiting till they complete or
4138 times out. The 1st task is started after the 2nd one.
4139
4140 The VM session (if any) must be in the task list.
4141
4142 Returns True if we executed the task and nothing abnormal happend.
4143 Query the process status from the TXS sessions.
4144
4145 Returns False if some unexpected task was signalled or we failed to
4146 submit the job.
4147 """
4148 reporter.testStart(sTestName);
4149
4150 # Submit the jobs.
4151 fRc = False;
4152 if oTxsSession1.asyncExec(sExecName1, asArgs1, asAddEnv1, sAsUser1, fWithTestPipe1, '1-',
4153 self.adjustTimeoutMs(cMsTimeout)):
4154 self.addTask(oTxsSession1);
4155
4156 self.sleep(2); # fudge! grr
4157
4158 if oTxsSession2.asyncExec(sExecName2, asArgs2, asAddEnv2, sAsUser2, fWithTestPipe2, '2-',
4159 self.adjustTimeoutMs(cMsTimeout)):
4160 self.addTask(oTxsSession2);
4161
4162 # Wait for the jobs to complete.
4163 cPendingJobs = 2;
4164 while True:
4165 oTask = self.waitForTasks(cMsTimeout + 1);
4166 if oTask is None:
4167 reporter.log('txsRunTest2: waitForTasks timed out');
4168 break;
4169
4170 if oTask is oTxsSession1 or oTask is oTxsSession2:
4171 if oTask is oTxsSession1: iTask = 1;
4172 else: iTask = 2;
4173 reporter.log('txsRunTest2: #%u - isSuccess=%s getResult=%s' \
4174 % (iTask, oTask.isSuccess(), oTask.getResult()));
4175 self.removeTask(oTask);
4176 cPendingJobs -= 1;
4177 if cPendingJobs <= 0:
4178 fRc = True;
4179 break;
4180
4181 elif not self.handleTask(oTask, 'txsRunTest'):
4182 break;
4183
4184 self.removeTask(oTxsSession2);
4185 if not oTxsSession2.pollTask():
4186 oTxsSession2.cancelTask();
4187 else:
4188 reporter.error('txsRunTest2: asyncExec #2 failed');
4189
4190 self.removeTask(oTxsSession1);
4191 if not oTxsSession1.pollTask():
4192 oTxsSession1.cancelTask();
4193 else:
4194 reporter.error('txsRunTest2: asyncExec #1 failed');
4195
4196 reporter.testDone();
4197 return fRc;
4198
4199 # pylint: enable=too-many-locals,too-many-arguments
4200
4201
4202 #
4203 # Working with test results via serial port.
4204 #
4205
4206 class TxsMonitorComFile(base.TdTaskBase):
4207 """
4208 Class that monitors a COM output file.
4209 """
4210
4211 def __init__(self, sComRawFile, asStopWords = None):
4212 base.TdTaskBase.__init__(self, utils.getCallerName());
4213 self.sComRawFile = sComRawFile;
4214 self.oStopRegExp = re.compile('\\b(' + '|'.join(asStopWords if asStopWords else ('PASSED', 'FAILED',)) + ')\\b');
4215 self.sResult = None; ##< The result.
4216 self.cchDisplayed = 0; ##< Offset into the file string of what we've already fed to the logger.
4217
4218 def toString(self):
4219 return '<%s sComRawFile=%s oStopRegExp=%s sResult=%s cchDisplayed=%s>' \
4220 % (base.TdTaskBase.toString(self), self.sComRawFile, self.oStopRegExp, self.sResult, self.cchDisplayed,);
4221
4222 def pollTask(self, fLocked = False):
4223 """
4224 Overrides TdTaskBase.pollTask() for the purpose of polling the file.
4225 """
4226 if not fLocked:
4227 self.lockTask();
4228
4229 sFile = utils.noxcptReadFile(self.sComRawFile, '', 'rU');
4230 if len(sFile) > self.cchDisplayed:
4231 sNew = sFile[self.cchDisplayed:];
4232 oMatch = self.oStopRegExp.search(sNew);
4233 if oMatch:
4234 # Done! Get result, flush all the output and signal the task.
4235 self.sResult = oMatch.group(1);
4236 for sLine in sNew.split('\n'):
4237 reporter.log('COM OUTPUT: %s' % (sLine,));
4238 self.cchDisplayed = len(sFile);
4239 self.signalTaskLocked();
4240 else:
4241 # Output whole lines only.
4242 offNewline = sFile.find('\n', self.cchDisplayed);
4243 while offNewline >= 0:
4244 reporter.log('COM OUTPUT: %s' % (sFile[self.cchDisplayed:offNewline]))
4245 self.cchDisplayed = offNewline + 1;
4246 offNewline = sFile.find('\n', self.cchDisplayed);
4247
4248 fRet = self.fSignalled;
4249 if not fLocked:
4250 self.unlockTask();
4251 return fRet;
4252
4253 # Our stuff.
4254 def getResult(self):
4255 """
4256 Returns the connected TXS session object on success.
4257 Returns None on failure or if the task has not yet completed.
4258 """
4259 self.oCv.acquire();
4260 sResult = self.sResult;
4261 self.oCv.release();
4262 return sResult;
4263
4264 def cancelTask(self):
4265 """ Cancels the task. """
4266 self.signalTask();
4267 return True;
4268
4269
4270 def monitorComRawFile(self, oSession, sComRawFile, cMsTimeout = 15*60000, asStopWords = None):
4271 """
4272 Monitors the COM output file for stop words (PASSED and FAILED by default).
4273
4274 Returns the stop word.
4275 Returns None on VM error and timeout.
4276 """
4277
4278 reporter.log2('monitorComRawFile: oSession=%s, cMsTimeout=%s, sComRawFile=%s' % (oSession, cMsTimeout, sComRawFile));
4279
4280 oMonitorTask = self.TxsMonitorComFile(sComRawFile, asStopWords);
4281 self.addTask(oMonitorTask);
4282
4283 cMsTimeout = self.adjustTimeoutMs(cMsTimeout);
4284 oTask = self.waitForTasks(cMsTimeout + 1);
4285 reporter.log2('monitorComRawFile: waitForTasks returned %s' % (oTask,));
4286
4287 if oTask is not oMonitorTask:
4288 oMonitorTask.cancelTask();
4289 self.removeTask(oMonitorTask);
4290
4291 oMonitorTask.pollTask();
4292 return oMonitorTask.getResult();
4293
4294
4295 def runVmAndMonitorComRawFile(self, sVmName, sComRawFile, cMsTimeout = 15*60000, asStopWords = None):
4296 """
4297 Runs the specified VM and monitors the given COM output file for stop
4298 words (PASSED and FAILED by default).
4299
4300 The caller is assumed to have configured the VM to use the given
4301 file. The method will take no action to verify this.
4302
4303 Returns the stop word.
4304 Returns None on VM error and timeout.
4305 """
4306
4307 # Start the VM.
4308 reporter.log('runVmAndMonitorComRawFile: Starting(/preparing) "%s" (timeout %s s)...' % (sVmName, cMsTimeout / 1000));
4309 reporter.flushall();
4310 oSession = self.startVmByName(sVmName);
4311 if oSession is not None:
4312 # Let it run and then terminate it.
4313 sRet = self.monitorComRawFile(oSession, sComRawFile, cMsTimeout, asStopWords);
4314 self.terminateVmBySession(oSession);
4315 else:
4316 sRet = None;
4317 return sRet;
4318
4319 #
4320 # Other stuff
4321 #
4322
4323 def waitForGAs(self,
4324 oSession, # type: vboxwrappers.SessionWrapper
4325 cMsTimeout = 120000, aenmWaitForRunLevels = None, aenmWaitForActive = None, aenmWaitForInactive = None):
4326 """
4327 Waits for the guest additions to enter a certain state.
4328
4329 aenmWaitForRunLevels - List of run level values to wait for (success if one matches).
4330 aenmWaitForActive - List facilities (type values) that must be active.
4331 aenmWaitForInactive - List facilities (type values) that must be inactive.
4332
4333 Defaults to wait for AdditionsRunLevelType_Userland if nothing else is given.
4334
4335 Returns True on success, False w/ error logging on timeout or failure.
4336 """
4337 reporter.log2('waitForGAs: oSession=%s, cMsTimeout=%s' % (oSession, cMsTimeout,));
4338
4339 #
4340 # Get IGuest:
4341 #
4342 try:
4343 oIGuest = oSession.o.console.guest;
4344 except:
4345 return reporter.errorXcpt();
4346
4347 #
4348 # Create a wait task:
4349 #
4350 from testdriver.vboxwrappers import AdditionsStatusTask;
4351 try:
4352 oGaStatusTask = AdditionsStatusTask(oSession = oSession,
4353 oIGuest = oIGuest,
4354 cMsTimeout = cMsTimeout,
4355 aenmWaitForRunLevels = aenmWaitForRunLevels,
4356 aenmWaitForActive = aenmWaitForActive,
4357 aenmWaitForInactive = aenmWaitForInactive);
4358 except:
4359 return reporter.errorXcpt();
4360
4361 #
4362 # Add the task and make sure the VM session is also present.
4363 #
4364 self.addTask(oGaStatusTask);
4365 fRemoveSession = self.addTask(oSession);
4366 oTask = self.waitForTasks(cMsTimeout + 1);
4367 reporter.log2('waitForGAs: returned %s (oGaStatusTask=%s, oSession=%s)' % (oTask, oGaStatusTask, oSession,));
4368 self.removeTask(oGaStatusTask);
4369 if fRemoveSession:
4370 self.removeTask(oSession);
4371
4372 #
4373 # Digest the result.
4374 #
4375 if oTask is oGaStatusTask:
4376 fSucceeded = oGaStatusTask.getResult();
4377 if fSucceeded is True:
4378 reporter.log('waitForGAs: Succeeded.');
4379 else:
4380 reporter.error('waitForGAs: Failed.');
4381 else:
4382 oGaStatusTask.cancelTask();
4383 if oTask is None:
4384 reporter.error('waitForGAs: Timed out.');
4385 elif oTask is oSession:
4386 oSession.reportPrematureTermination('waitForGAs: ');
4387 else:
4388 reporter.error('waitForGAs: unknown/wrong task %s' % (oTask,));
4389 fSucceeded = False;
4390 return fSucceeded;
4391
4392 @staticmethod
4393 def controllerTypeToName(eControllerType):
4394 """
4395 Translate a controller type to a standard controller name.
4396 """
4397 if eControllerType in (vboxcon.StorageControllerType_PIIX3, vboxcon.StorageControllerType_PIIX4,):
4398 sName = "IDE Controller";
4399 elif eControllerType == vboxcon.StorageControllerType_IntelAhci:
4400 sName = "SATA Controller";
4401 elif eControllerType == vboxcon.StorageControllerType_LsiLogicSas:
4402 sName = "SAS Controller";
4403 elif eControllerType in (vboxcon.StorageControllerType_LsiLogic, vboxcon.StorageControllerType_BusLogic,):
4404 sName = "SCSI Controller";
4405 elif eControllerType == vboxcon.StorageControllerType_NVMe:
4406 sName = "NVMe Controller";
4407 elif eControllerType == vboxcon.StorageControllerType_VirtioSCSI:
4408 sName = "VirtIO SCSI Controller";
4409 else:
4410 sName = "Storage Controller";
4411 return sName;
Note: See TracBrowser for help on using the repository browser.

© 2025 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette