VirtualBox

source: vbox/trunk/src/VBox/ValidationKit/testdriver/vbox.py@ 95093

Last change on this file since 95093 was 94669, checked in by vboxsync, 3 years ago

doc/manual,Main,Frontends: API changes in preparation for full VM encryption, guarded by VBOX_WITH_FULL_VM_ENCRYPTION (disabled by default) and returning a not supported error for now, bugref:9955 [validationkit fix]

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 197.4 KB
Line 
1# -*- coding: utf-8 -*-
2# $Id: vbox.py 94669 2022-04-21 14:38:18Z vboxsync $
3# pylint: disable=too-many-lines
4
5"""
6VirtualBox Specific base testdriver.
7"""
8
9__copyright__ = \
10"""
11Copyright (C) 2010-2022 Oracle Corporation
12
13This file is part of VirtualBox Open Source Edition (OSE), as
14available from http://www.virtualbox.org. This file is free software;
15you can redistribute it and/or modify it under the terms of the GNU
16General Public License (GPL) as published by the Free Software
17Foundation, in version 2 as it comes in the "COPYING" file of the
18VirtualBox OSE distribution. VirtualBox OSE is distributed in the
19hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
20
21The contents of this file may alternatively be used under the terms
22of the Common Development and Distribution License Version 1.0
23(CDDL) only, as it comes in the "COPYING.CDDL" file of the
24VirtualBox OSE distribution, in which case the provisions of the
25CDDL are applicable instead of those of the GPL.
26
27You may elect to license modified versions of this file under the
28terms and conditions of either the GPL or the CDDL or both.
29"""
30__version__ = "$Revision: 94669 $"
31
32# pylint: disable=unnecessary-semicolon
33
34# Standard Python imports.
35import datetime
36import os
37import platform
38import re;
39import sys
40import threading
41import time
42import traceback
43
44# Figure out where the validation kit lives and make sure it's in the path.
45try: __file__
46except: __file__ = sys.argv[0];
47g_ksValidationKitDir = os.path.dirname(os.path.dirname(os.path.abspath(__file__)));
48if g_ksValidationKitDir not in sys.path:
49 sys.path.append(g_ksValidationKitDir);
50
51# Validation Kit imports.
52from common import utils;
53from testdriver import base;
54from testdriver import btresolver;
55from testdriver import reporter;
56from testdriver import vboxcon;
57from testdriver import vboxtestvms;
58
59# Python 3 hacks:
60if sys.version_info[0] >= 3:
61 xrange = range; # pylint: disable=redefined-builtin,invalid-name
62 long = int; # pylint: disable=redefined-builtin,invalid-name
63
64#
65# Exception and Error Unification Hacks.
66# Note! This is pretty gross stuff. Be warned!
67# TODO: Find better ways of doing these things, preferrably in vboxapi.
68#
69
70ComException = None; # pylint: disable=invalid-name
71__fnComExceptionGetAttr__ = None; # pylint: disable=invalid-name
72
73def __MyDefaultGetAttr(oSelf, sName):
74 """ __getattribute__/__getattr__ default fake."""
75 try:
76 oAttr = oSelf.__dict__[sName];
77 except:
78 oAttr = dir(oSelf)[sName];
79 return oAttr;
80
81def __MyComExceptionGetAttr(oSelf, sName):
82 """ ComException.__getattr__ wrapper - both XPCOM and COM. """
83 try:
84 oAttr = __fnComExceptionGetAttr__(oSelf, sName);
85 except AttributeError:
86 if platform.system() == 'Windows':
87 if sName == 'errno':
88 oAttr = __fnComExceptionGetAttr__(oSelf, 'hresult');
89 elif sName == 'msg':
90 oAttr = __fnComExceptionGetAttr__(oSelf, 'strerror');
91 else:
92 raise;
93 else:
94 if sName == 'hresult':
95 oAttr = __fnComExceptionGetAttr__(oSelf, 'errno');
96 elif sName == 'strerror':
97 oAttr = __fnComExceptionGetAttr__(oSelf, 'msg');
98 elif sName == 'excepinfo':
99 oAttr = None;
100 elif sName == 'argerror':
101 oAttr = None;
102 else:
103 raise;
104 #print '__MyComExceptionGetAttr(,%s) -> "%s"' % (sName, oAttr);
105 return oAttr;
106
107def __deployExceptionHacks__(oNativeComExceptionClass):
108 """
109 Deploys the exception and error hacks that helps unifying COM and XPCOM
110 exceptions and errors.
111 """
112 global ComException # pylint: disable=invalid-name
113 global __fnComExceptionGetAttr__ # pylint: disable=invalid-name
114
115 # Hook up our attribute getter for the exception class (ASSUMES new-style).
116 if __fnComExceptionGetAttr__ is None:
117 try:
118 __fnComExceptionGetAttr__ = getattr(oNativeComExceptionClass, '__getattr__');
119 except:
120 try:
121 __fnComExceptionGetAttr__ = getattr(oNativeComExceptionClass, '__getattribute__');
122 except:
123 __fnComExceptionGetAttr__ = __MyDefaultGetAttr;
124 setattr(oNativeComExceptionClass, '__getattr__', __MyComExceptionGetAttr)
125
126 # Make the modified classes accessible (are there better ways to do this?)
127 ComException = oNativeComExceptionClass
128 return None;
129
130
131
132#
133# Utility functions.
134#
135
136def isIpAddrValid(sIpAddr):
137 """
138 Checks if a IPv4 address looks valid. This will return false for
139 localhost and similar.
140 Returns True / False.
141 """
142 if sIpAddr is None: return False;
143 if len(sIpAddr.split('.')) != 4: return False;
144 if sIpAddr.endswith('.0'): return False;
145 if sIpAddr.endswith('.255'): return False;
146 if sIpAddr.startswith('127.'): return False;
147 if sIpAddr.startswith('169.254.'): return False;
148 if sIpAddr.startswith('192.0.2.'): return False;
149 if sIpAddr.startswith('224.0.0.'): return False;
150 return True;
151
152def stringifyErrorInfo(oErrInfo):
153 """
154 Stringifies the error information in a IVirtualBoxErrorInfo object.
155
156 Returns string with error info.
157 """
158 try:
159 rc = oErrInfo.resultCode;
160 sText = oErrInfo.text;
161 sIid = oErrInfo.interfaceID;
162 sComponent = oErrInfo.component;
163 except:
164 sRet = 'bad error object (%s)?' % (oErrInfo,);
165 traceback.print_exc();
166 else:
167 sRet = 'rc=%s text="%s" IID=%s component=%s' % (ComError.toString(rc), sText, sIid, sComponent);
168 return sRet;
169
170def reportError(oErr, sText):
171 """
172 Report a VirtualBox error on oErr. oErr can be IVirtualBoxErrorInfo
173 or IProgress. Anything else is ignored.
174
175 Returns the same a reporter.error().
176 """
177 try:
178 oErrObj = oErr.errorInfo; # IProgress.
179 except:
180 oErrObj = oErr;
181 reporter.error(sText);
182 return reporter.error(stringifyErrorInfo(oErrObj));
183
184def formatComOrXpComException(oType, oXcpt):
185 """
186 Callback installed with the reporter to better format COM exceptions.
187 Similar to format_exception_only, only it returns None if not interested.
188 """
189 _ = oType;
190 oVBoxMgr = vboxcon.goHackModuleClass.oVBoxMgr;
191 if oVBoxMgr is None:
192 return None;
193 if not oVBoxMgr.xcptIsOurXcptKind(oXcpt): # pylint: disable=not-callable
194 return None;
195
196 if platform.system() == 'Windows':
197 hrc = oXcpt.hresult;
198 if hrc == ComError.DISP_E_EXCEPTION and oXcpt.excepinfo is not None and len(oXcpt.excepinfo) > 5:
199 hrc = oXcpt.excepinfo[5];
200 sWhere = oXcpt.excepinfo[1];
201 sMsg = oXcpt.excepinfo[2];
202 else:
203 sWhere = None;
204 sMsg = oXcpt.strerror;
205 else:
206 hrc = oXcpt.errno;
207 sWhere = None;
208 sMsg = oXcpt.msg;
209
210 sHrc = oVBoxMgr.xcptToString(hrc); # pylint: disable=not-callable
211 if sHrc.find('(') < 0:
212 sHrc = '%s (%#x)' % (sHrc, hrc & 0xffffffff,);
213
214 asRet = ['COM-Xcpt: %s' % (sHrc,)];
215 if sMsg and sWhere:
216 asRet.append('--------- %s: %s' % (sWhere, sMsg,));
217 elif sMsg:
218 asRet.append('--------- %s' % (sMsg,));
219 return asRet;
220 #if sMsg and sWhere:
221 # return ['COM-Xcpt: %s - %s: %s' % (sHrc, sWhere, sMsg,)];
222 #if sMsg:
223 # return ['COM-Xcpt: %s - %s' % (sHrc, sMsg,)];
224 #return ['COM-Xcpt: %s' % (sHrc,)];
225
226#
227# Classes
228#
229
230class ComError(object):
231 """
232 Unified COM and XPCOM status code repository.
233 This works more like a module than a class since it's replacing a module.
234 """
235
236 # The VBOX_E_XXX bits:
237 __VBOX_E_BASE = -2135228416;
238 VBOX_E_OBJECT_NOT_FOUND = __VBOX_E_BASE + 1;
239 VBOX_E_INVALID_VM_STATE = __VBOX_E_BASE + 2;
240 VBOX_E_VM_ERROR = __VBOX_E_BASE + 3;
241 VBOX_E_FILE_ERROR = __VBOX_E_BASE + 4;
242 VBOX_E_IPRT_ERROR = __VBOX_E_BASE + 5;
243 VBOX_E_PDM_ERROR = __VBOX_E_BASE + 6;
244 VBOX_E_INVALID_OBJECT_STATE = __VBOX_E_BASE + 7;
245 VBOX_E_HOST_ERROR = __VBOX_E_BASE + 8;
246 VBOX_E_NOT_SUPPORTED = __VBOX_E_BASE + 9;
247 VBOX_E_XML_ERROR = __VBOX_E_BASE + 10;
248 VBOX_E_INVALID_SESSION_STATE = __VBOX_E_BASE + 11;
249 VBOX_E_OBJECT_IN_USE = __VBOX_E_BASE + 12;
250 VBOX_E_DONT_CALL_AGAIN = __VBOX_E_BASE + 13;
251
252 # Reverse lookup table.
253 dDecimalToConst = {}; # pylint: disable=invalid-name
254
255 def __init__(self):
256 raise base.GenError('No instances, please');
257
258 @staticmethod
259 def copyErrors(oNativeComErrorClass):
260 """
261 Copy all error codes from oNativeComErrorClass to this class and
262 install compatability mappings.
263 """
264
265 # First, add the VBOX_E_XXX constants to dDecimalToConst.
266 for sAttr in dir(ComError):
267 if sAttr.startswith('VBOX_E'):
268 oAttr = getattr(ComError, sAttr);
269 ComError.dDecimalToConst[oAttr] = sAttr;
270
271 # Copy all error codes from oNativeComErrorClass to this class.
272 for sAttr in dir(oNativeComErrorClass):
273 if sAttr[0].isupper():
274 oAttr = getattr(oNativeComErrorClass, sAttr);
275 setattr(ComError, sAttr, oAttr);
276 if isinstance(oAttr, int):
277 ComError.dDecimalToConst[oAttr] = sAttr;
278
279 # Install mappings to the other platform.
280 if platform.system() == 'Windows':
281 ComError.NS_OK = ComError.S_OK;
282 ComError.NS_ERROR_FAILURE = ComError.E_FAIL;
283 ComError.NS_ERROR_ABORT = ComError.E_ABORT;
284 ComError.NS_ERROR_NULL_POINTER = ComError.E_POINTER;
285 ComError.NS_ERROR_NO_INTERFACE = ComError.E_NOINTERFACE;
286 ComError.NS_ERROR_INVALID_ARG = ComError.E_INVALIDARG;
287 ComError.NS_ERROR_OUT_OF_MEMORY = ComError.E_OUTOFMEMORY;
288 ComError.NS_ERROR_NOT_IMPLEMENTED = ComError.E_NOTIMPL;
289 ComError.NS_ERROR_UNEXPECTED = ComError.E_UNEXPECTED;
290 else:
291 ComError.E_ACCESSDENIED = -2147024891; # see VBox/com/defs.h
292 ComError.S_OK = ComError.NS_OK;
293 ComError.E_FAIL = ComError.NS_ERROR_FAILURE;
294 ComError.E_ABORT = ComError.NS_ERROR_ABORT;
295 ComError.E_POINTER = ComError.NS_ERROR_NULL_POINTER;
296 ComError.E_NOINTERFACE = ComError.NS_ERROR_NO_INTERFACE;
297 ComError.E_INVALIDARG = ComError.NS_ERROR_INVALID_ARG;
298 ComError.E_OUTOFMEMORY = ComError.NS_ERROR_OUT_OF_MEMORY;
299 ComError.E_NOTIMPL = ComError.NS_ERROR_NOT_IMPLEMENTED;
300 ComError.E_UNEXPECTED = ComError.NS_ERROR_UNEXPECTED;
301 ComError.DISP_E_EXCEPTION = -2147352567; # For COM compatability only.
302 return True;
303
304 @staticmethod
305 def getXcptResult(oXcpt):
306 """
307 Gets the result code for an exception.
308 Returns COM status code (or E_UNEXPECTED).
309 """
310 if platform.system() == 'Windows':
311 # The DISP_E_EXCEPTION + excptinfo fun needs checking up, only
312 # empirical info on it so far.
313 try:
314 hrXcpt = oXcpt.hresult;
315 except AttributeError:
316 hrXcpt = ComError.E_UNEXPECTED;
317 if hrXcpt == ComError.DISP_E_EXCEPTION and oXcpt.excepinfo is not None:
318 hrXcpt = oXcpt.excepinfo[5];
319 else:
320 try:
321 hrXcpt = oXcpt.errno;
322 except AttributeError:
323 hrXcpt = ComError.E_UNEXPECTED;
324 return hrXcpt;
325
326 @staticmethod
327 def equal(oXcpt, hr):
328 """
329 Checks if the ComException e is not equal to the COM status code hr.
330 This takes DISP_E_EXCEPTION & excepinfo into account.
331
332 This method can be used with any Exception derivate, however it will
333 only return True for classes similar to the two ComException variants.
334 """
335 if platform.system() == 'Windows':
336 # The DISP_E_EXCEPTION + excptinfo fun needs checking up, only
337 # empirical info on it so far.
338 try:
339 hrXcpt = oXcpt.hresult;
340 except AttributeError:
341 return False;
342 if hrXcpt == ComError.DISP_E_EXCEPTION and oXcpt.excepinfo is not None:
343 hrXcpt = oXcpt.excepinfo[5];
344 else:
345 try:
346 hrXcpt = oXcpt.errno;
347 except AttributeError:
348 return False;
349 return hrXcpt == hr;
350
351 @staticmethod
352 def notEqual(oXcpt, hr):
353 """
354 Checks if the ComException e is not equal to the COM status code hr.
355 See equal() for more details.
356 """
357 return not ComError.equal(oXcpt, hr)
358
359 @staticmethod
360 def toString(hr):
361 """
362 Converts the specified COM status code to a string.
363 """
364 try:
365 sStr = ComError.dDecimalToConst[int(hr)];
366 except KeyError:
367 hrLong = long(hr);
368 sStr = '%#x (%d)' % (hrLong, hrLong);
369 return sStr;
370
371
372class Build(object): # pylint: disable=too-few-public-methods
373 """
374 A VirtualBox build.
375
376 Note! After dropping the installation of VBox from this code and instead
377 realizing that with the vboxinstall.py wrapper driver, this class is
378 of much less importance and contains unnecessary bits and pieces.
379 """
380
381 def __init__(self, oDriver, strInstallPath):
382 """
383 Construct a build object from a build file name and/or install path.
384 """
385 # Initialize all members first.
386 self.oDriver = oDriver;
387 self.sInstallPath = strInstallPath;
388 self.sSdkPath = None;
389 self.sSrcRoot = None;
390 self.sKind = None;
391 self.sDesignation = None;
392 self.sType = None;
393 self.sOs = None;
394 self.sArch = None;
395 self.sGuestAdditionsIso = None;
396
397 # Figure out the values as best we can.
398 if strInstallPath is None:
399 #
400 # Both parameters are None, which means we're falling back on a
401 # build in the development tree.
402 #
403 self.sKind = "development";
404
405 if self.sType is None:
406 self.sType = os.environ.get("KBUILD_TYPE", "release");
407 if self.sOs is None:
408 self.sOs = os.environ.get("KBUILD_TARGET", oDriver.sHost);
409 if self.sArch is None:
410 self.sArch = os.environ.get("KBUILD_TARGET_ARCH", oDriver.sHostArch);
411
412 sOut = os.path.join('out', self.sOs + '.' + self.sArch, self.sType);
413 sSearch = os.environ.get('VBOX_TD_DEV_TREE', os.path.dirname(__file__)); # Env.var. for older trees or testboxscript.
414 sCandidat = None;
415 for i in range(0, 10): # pylint: disable=unused-variable
416 sBldDir = os.path.join(sSearch, sOut);
417 if os.path.isdir(sBldDir):
418 sCandidat = os.path.join(sBldDir, 'bin', 'VBoxSVC' + base.exeSuff());
419 if os.path.isfile(sCandidat):
420 self.sSdkPath = os.path.join(sBldDir, 'bin/sdk');
421 break;
422 sCandidat = os.path.join(sBldDir, 'dist/VirtualBox.app/Contents/MacOS/VBoxSVC');
423 if os.path.isfile(sCandidat):
424 self.sSdkPath = os.path.join(sBldDir, 'dist/sdk');
425 break;
426 sSearch = os.path.abspath(os.path.join(sSearch, '..'));
427 if sCandidat is None or not os.path.isfile(sCandidat):
428 raise base.GenError();
429 self.sInstallPath = os.path.abspath(os.path.dirname(sCandidat));
430 self.sSrcRoot = os.path.abspath(sSearch);
431
432 self.sDesignation = os.environ.get('TEST_BUILD_DESIGNATION', None);
433 if self.sDesignation is None:
434 try:
435 oFile = utils.openNoInherit(os.path.join(self.sSrcRoot, sOut, 'revision.kmk'), 'r');
436 except:
437 pass;
438 else:
439 s = oFile.readline();
440 oFile.close();
441 oMatch = re.search("VBOX_SVN_REV=(\\d+)", s);
442 if oMatch is not None:
443 self.sDesignation = oMatch.group(1);
444
445 if self.sDesignation is None:
446 self.sDesignation = 'XXXXX'
447 else:
448 #
449 # We've been pointed to an existing installation, this could be
450 # in the out dir of a svn checkout, untarred VBoxAll or a real
451 # installation directory.
452 #
453 self.sKind = "preinstalled";
454 self.sType = "release";
455 self.sOs = oDriver.sHost;
456 self.sArch = oDriver.sHostArch;
457 self.sInstallPath = os.path.abspath(strInstallPath);
458 self.sSdkPath = os.path.join(self.sInstallPath, 'sdk');
459 self.sSrcRoot = None;
460 self.sDesignation = os.environ.get('TEST_BUILD_DESIGNATION', 'XXXXX');
461 ## @todo Much more work is required here.
462
463 # Try Determine the build type.
464 sVBoxManage = os.path.join(self.sInstallPath, 'VBoxManage' + base.exeSuff());
465 if os.path.isfile(sVBoxManage):
466 try:
467 (iExit, sStdOut, _) = utils.processOutputUnchecked([sVBoxManage, '--dump-build-type']);
468 sStdOut = sStdOut.strip();
469 if iExit == 0 and sStdOut in ('release', 'debug', 'strict', 'dbgopt', 'asan'):
470 self.sType = sStdOut;
471 reporter.log('Build: Detected build type: %s' % (self.sType));
472 else:
473 reporter.log('Build: --dump-build-type -> iExit=%u sStdOut=%s' % (iExit, sStdOut,));
474 except:
475 reporter.logXcpt('Build: Running "%s --dump-build-type" failed!' % (sVBoxManage,));
476 else:
477 reporter.log3('Build: sVBoxManage=%s not found' % (sVBoxManage,));
478
479 # Do some checks.
480 sVMMR0 = os.path.join(self.sInstallPath, 'VMMR0.r0');
481 if not os.path.isfile(sVMMR0) and utils.getHostOs() == 'solaris': # solaris is special.
482 sVMMR0 = os.path.join(self.sInstallPath, 'amd64' if utils.getHostArch() == 'amd64' else 'i386', 'VMMR0.r0');
483 if not os.path.isfile(sVMMR0):
484 raise base.GenError('%s is missing' % (sVMMR0,));
485
486 # Guest additions location is different on windows for some _stupid_ reason.
487 if self.sOs == 'win' and self.sKind != 'development':
488 self.sGuestAdditionsIso = '%s/VBoxGuestAdditions.iso' % (self.sInstallPath,);
489 elif self.sOs == 'darwin':
490 self.sGuestAdditionsIso = '%s/VBoxGuestAdditions.iso' % (self.sInstallPath,);
491 elif self.sOs == 'solaris':
492 self.sGuestAdditionsIso = '%s/VBoxGuestAdditions.iso' % (self.sInstallPath,);
493 else:
494 self.sGuestAdditionsIso = '%s/additions/VBoxGuestAdditions.iso' % (self.sInstallPath,);
495
496 # __init__ end;
497
498 def isDevBuild(self):
499 """ Returns True if it's development build (kind), otherwise False. """
500 return self.sKind == 'development';
501
502
503class EventHandlerBase(object):
504 """
505 Base class for both Console and VirtualBox event handlers.
506 """
507
508 def __init__(self, dArgs, fpApiVer, sName = None):
509 self.oVBoxMgr = dArgs['oVBoxMgr'];
510 self.oEventSrc = dArgs['oEventSrc']; # Console/VirtualBox for < 3.3
511 self.oListener = dArgs['oListener'];
512 self.fPassive = self.oListener is not None;
513 self.sName = sName
514 self.fShutdown = False;
515 self.oThread = None;
516 self.fpApiVer = fpApiVer;
517 self.dEventNo2Name = {};
518 for sKey, iValue in self.oVBoxMgr.constants.all_values('VBoxEventType').items():
519 self.dEventNo2Name[iValue] = sKey;
520
521 def threadForPassiveMode(self):
522 """
523 The thread procedure for the event processing thread.
524 """
525 assert self.fPassive is not None;
526 while not self.fShutdown:
527 try:
528 oEvt = self.oEventSrc.getEvent(self.oListener, 500);
529 except:
530 if not self.oVBoxMgr.xcptIsDeadInterface(): reporter.logXcpt();
531 else: reporter.log('threadForPassiveMode/%s: interface croaked (ignored)' % (self.sName,));
532 break;
533 if oEvt:
534 self.handleEvent(oEvt);
535 if not self.fShutdown:
536 try:
537 self.oEventSrc.eventProcessed(self.oListener, oEvt);
538 except:
539 reporter.logXcpt();
540 break;
541 self.unregister(fWaitForThread = False);
542 return None;
543
544 def startThreadForPassiveMode(self):
545 """
546 Called when working in passive mode.
547 """
548 self.oThread = threading.Thread(target = self.threadForPassiveMode, \
549 args=(), name=('PAS-%s' % (self.sName,)));
550 self.oThread.setDaemon(True)
551 self.oThread.start();
552 return None;
553
554 def unregister(self, fWaitForThread = True):
555 """
556 Unregister the event handler.
557 """
558 fRc = False;
559 if not self.fShutdown:
560 self.fShutdown = True;
561
562 if self.oEventSrc is not None:
563 if self.fpApiVer < 3.3:
564 try:
565 self.oEventSrc.unregisterCallback(self.oListener);
566 fRc = True;
567 except:
568 reporter.errorXcpt('unregisterCallback failed on %s' % (self.oListener,));
569 else:
570 try:
571 self.oEventSrc.unregisterListener(self.oListener);
572 fRc = True;
573 except:
574 if self.oVBoxMgr.xcptIsDeadInterface():
575 reporter.log('unregisterListener failed on %s because of dead interface (%s)'
576 % (self.oListener, self.oVBoxMgr.xcptToString(),));
577 else:
578 reporter.errorXcpt('unregisterListener failed on %s' % (self.oListener,));
579
580 if self.oThread is not None \
581 and self.oThread != threading.current_thread():
582 self.oThread.join();
583 self.oThread = None;
584
585 _ = fWaitForThread;
586 return fRc;
587
588 def handleEvent(self, oEvt):
589 """
590 Compatibility wrapper that child classes implement.
591 """
592 _ = oEvt;
593 return None;
594
595 @staticmethod
596 def registerDerivedEventHandler(oVBoxMgr, fpApiVer, oSubClass, dArgsCopy, # pylint: disable=too-many-arguments
597 oSrcParent, sSrcParentNm, sICallbackNm,
598 fMustSucceed = True, sLogSuffix = '', aenmEvents = None):
599 """
600 Registers the callback / event listener.
601 """
602 dArgsCopy['oVBoxMgr'] = oVBoxMgr;
603 dArgsCopy['oListener'] = None;
604 if fpApiVer < 3.3:
605 dArgsCopy['oEventSrc'] = oSrcParent;
606 try:
607 oRet = oVBoxMgr.createCallback(sICallbackNm, oSubClass, dArgsCopy);
608 except:
609 reporter.errorXcpt('%s::registerCallback(%s) failed%s' % (sSrcParentNm, oRet, sLogSuffix));
610 else:
611 try:
612 oSrcParent.registerCallback(oRet);
613 return oRet;
614 except Exception as oXcpt:
615 if fMustSucceed or ComError.notEqual(oXcpt, ComError.E_UNEXPECTED):
616 reporter.errorXcpt('%s::registerCallback(%s)%s' % (sSrcParentNm, oRet, sLogSuffix));
617 else:
618 #
619 # Scalable event handling introduced in VBox 4.0.
620 #
621 fPassive = sys.platform == 'win32'; # or webservices.
622
623 if not aenmEvents:
624 aenmEvents = (vboxcon.VBoxEventType_Any,);
625
626 try:
627 oEventSrc = oSrcParent.eventSource;
628 dArgsCopy['oEventSrc'] = oEventSrc;
629 if not fPassive:
630 oListener = oRet = oVBoxMgr.createListener(oSubClass, dArgsCopy);
631 else:
632 oListener = oEventSrc.createListener();
633 dArgsCopy['oListener'] = oListener;
634 oRet = oSubClass(dArgsCopy);
635 except:
636 reporter.errorXcpt('%s::eventSource.createListener(%s) failed%s' % (sSrcParentNm, oListener, sLogSuffix));
637 else:
638 try:
639 oEventSrc.registerListener(oListener, aenmEvents, not fPassive);
640 except Exception as oXcpt:
641 if fMustSucceed or ComError.notEqual(oXcpt, ComError.E_UNEXPECTED):
642 reporter.errorXcpt('%s::eventSource.registerListener(%s) failed%s'
643 % (sSrcParentNm, oListener, sLogSuffix));
644 else:
645 if not fPassive:
646 if sys.platform == 'win32':
647 from win32com.server.util import unwrap # pylint: disable=import-error
648 oRet = unwrap(oRet);
649 oRet.oListener = oListener;
650 else:
651 oRet.startThreadForPassiveMode();
652 return oRet;
653 return None;
654
655
656
657
658class ConsoleEventHandlerBase(EventHandlerBase):
659 """
660 Base class for handling IConsole events.
661
662 The class has IConsoleCallback (<=3.2) compatible callback methods which
663 the user can override as needed.
664
665 Note! This class must not inherit from object or we'll get type errors in VBoxPython.
666 """
667 def __init__(self, dArgs, sName = None):
668 self.oSession = dArgs['oSession'];
669 self.oConsole = dArgs['oConsole'];
670 if sName is None:
671 sName = self.oSession.sName;
672 EventHandlerBase.__init__(self, dArgs, self.oSession.fpApiVer, sName);
673
674
675 # pylint: disable=missing-docstring,too-many-arguments,unused-argument
676 def onMousePointerShapeChange(self, fVisible, fAlpha, xHot, yHot, cx, cy, abShape):
677 reporter.log2('onMousePointerShapeChange/%s' % (self.sName));
678 def onMouseCapabilityChange(self, fSupportsAbsolute, *aArgs): # Extra argument was added in 3.2.
679 reporter.log2('onMouseCapabilityChange/%s' % (self.sName));
680 def onKeyboardLedsChange(self, fNumLock, fCapsLock, fScrollLock):
681 reporter.log2('onKeyboardLedsChange/%s' % (self.sName));
682 def onStateChange(self, eState):
683 reporter.log2('onStateChange/%s' % (self.sName));
684 def onAdditionsStateChange(self):
685 reporter.log2('onAdditionsStateChange/%s' % (self.sName));
686 def onNetworkAdapterChange(self, oNic):
687 reporter.log2('onNetworkAdapterChange/%s' % (self.sName));
688 def onSerialPortChange(self, oPort):
689 reporter.log2('onSerialPortChange/%s' % (self.sName));
690 def onParallelPortChange(self, oPort):
691 reporter.log2('onParallelPortChange/%s' % (self.sName));
692 def onStorageControllerChange(self):
693 reporter.log2('onStorageControllerChange/%s' % (self.sName));
694 def onMediumChange(self, attachment):
695 reporter.log2('onMediumChange/%s' % (self.sName));
696 def onCPUChange(self, iCpu, fAdd):
697 reporter.log2('onCPUChange/%s' % (self.sName));
698 def onVRDPServerChange(self):
699 reporter.log2('onVRDPServerChange/%s' % (self.sName));
700 def onRemoteDisplayInfoChange(self):
701 reporter.log2('onRemoteDisplayInfoChange/%s' % (self.sName));
702 def onUSBControllerChange(self):
703 reporter.log2('onUSBControllerChange/%s' % (self.sName));
704 def onUSBDeviceStateChange(self, oDevice, fAttached, oError):
705 reporter.log2('onUSBDeviceStateChange/%s' % (self.sName));
706 def onSharedFolderChange(self, fGlobal):
707 reporter.log2('onSharedFolderChange/%s' % (self.sName));
708 def onRuntimeError(self, fFatal, sErrId, sMessage):
709 reporter.log2('onRuntimeError/%s' % (self.sName));
710 def onCanShowWindow(self):
711 reporter.log2('onCanShowWindow/%s' % (self.sName));
712 return True
713 def onShowWindow(self):
714 reporter.log2('onShowWindow/%s' % (self.sName));
715 return None;
716 # pylint: enable=missing-docstring,too-many-arguments,unused-argument
717
718 def handleEvent(self, oEvt):
719 """
720 Compatibility wrapper.
721 """
722 try:
723 oEvtBase = self.oVBoxMgr.queryInterface(oEvt, 'IEvent');
724 eType = oEvtBase.type;
725 except:
726 reporter.logXcpt();
727 return None;
728 if eType == vboxcon.VBoxEventType_OnRuntimeError:
729 try:
730 oEvtIt = self.oVBoxMgr.queryInterface(oEvtBase, 'IRuntimeErrorEvent');
731 return self.onRuntimeError(oEvtIt.fatal, oEvtIt.id, oEvtIt.message)
732 except:
733 reporter.logXcpt();
734 ## @todo implement the other events.
735 try:
736 if eType not in (vboxcon.VBoxEventType_OnMousePointerShapeChanged,
737 vboxcon.VBoxEventType_OnCursorPositionChanged):
738 if eType in self.dEventNo2Name:
739 reporter.log2('%s(%s)/%s' % (self.dEventNo2Name[eType], str(eType), self.sName));
740 else:
741 reporter.log2('%s/%s' % (str(eType), self.sName));
742 except AttributeError: # Handle older VBox versions which don't have a specific event.
743 pass;
744 return None;
745
746
747class VirtualBoxEventHandlerBase(EventHandlerBase):
748 """
749 Base class for handling IVirtualBox events.
750
751 The class has IConsoleCallback (<=3.2) compatible callback methods which
752 the user can override as needed.
753
754 Note! This class must not inherit from object or we'll get type errors in VBoxPython.
755 """
756 def __init__(self, dArgs, sName = "emanon"):
757 self.oVBoxMgr = dArgs['oVBoxMgr'];
758 self.oVBox = dArgs['oVBox'];
759 EventHandlerBase.__init__(self, dArgs, self.oVBox.fpApiVer, sName);
760
761 # pylint: disable=missing-docstring,unused-argument
762 def onMachineStateChange(self, sMachineId, eState):
763 pass;
764 def onMachineDataChange(self, sMachineId):
765 pass;
766 def onExtraDataCanChange(self, sMachineId, sKey, sValue):
767 # The COM bridge does tuples differently. Not very funny if you ask me... ;-)
768 if self.oVBoxMgr.type == 'MSCOM':
769 return '', 0, True;
770 return True, ''
771 def onExtraDataChange(self, sMachineId, sKey, sValue):
772 pass;
773 def onMediumRegistered(self, sMediumId, eMediumType, fRegistered):
774 pass;
775 def onMachineRegistered(self, sMachineId, fRegistered):
776 pass;
777 def onSessionStateChange(self, sMachineId, eState):
778 pass;
779 def onSnapshotTaken(self, sMachineId, sSnapshotId):
780 pass;
781 def onSnapshotDiscarded(self, sMachineId, sSnapshotId):
782 pass;
783 def onSnapshotChange(self, sMachineId, sSnapshotId):
784 pass;
785 def onGuestPropertyChange(self, sMachineId, sName, sValue, sFlags, fWasDeleted):
786 pass;
787 # pylint: enable=missing-docstring,unused-argument
788
789 def handleEvent(self, oEvt):
790 """
791 Compatibility wrapper.
792 """
793 try:
794 oEvtBase = self.oVBoxMgr.queryInterface(oEvt, 'IEvent');
795 eType = oEvtBase.type;
796 except:
797 reporter.logXcpt();
798 return None;
799 if eType == vboxcon.VBoxEventType_OnMachineStateChanged:
800 try:
801 oEvtIt = self.oVBoxMgr.queryInterface(oEvtBase, 'IMachineStateChangedEvent');
802 return self.onMachineStateChange(oEvtIt.machineId, oEvtIt.state)
803 except:
804 reporter.logXcpt();
805 elif eType == vboxcon.VBoxEventType_OnGuestPropertyChanged:
806 try:
807 oEvtIt = self.oVBoxMgr.queryInterface(oEvtBase, 'IGuestPropertyChangedEvent');
808 return self.onGuestPropertyChange(oEvtIt.machineId, oEvtIt.name, oEvtIt.value, oEvtIt.flags, oEvtIt.fWasDeleted);
809 except:
810 reporter.logXcpt();
811 ## @todo implement the other events.
812 if eType in self.dEventNo2Name:
813 reporter.log2('%s(%s)/%s' % (self.dEventNo2Name[eType], str(eType), self.sName));
814 else:
815 reporter.log2('%s/%s' % (str(eType), self.sName));
816 return None;
817
818
819class SessionConsoleEventHandler(ConsoleEventHandlerBase):
820 """
821 For catching machine state changes and waking up the task machinery at that point.
822 """
823 def __init__(self, dArgs):
824 ConsoleEventHandlerBase.__init__(self, dArgs);
825
826 def onMachineStateChange(self, sMachineId, eState): # pylint: disable=unused-argument
827 """ Just interrupt the wait loop here so it can check again. """
828 _ = sMachineId; _ = eState;
829 self.oVBoxMgr.interruptWaitEvents();
830
831 def onRuntimeError(self, fFatal, sErrId, sMessage):
832 reporter.log('onRuntimeError/%s: fFatal=%d sErrId=%s sMessage=%s' % (self.sName, fFatal, sErrId, sMessage));
833 oSession = self.oSession;
834 if oSession is not None: # paranoia
835 if sErrId == 'HostMemoryLow':
836 oSession.signalHostMemoryLow();
837 if sys.platform == 'win32':
838 from testdriver import winbase;
839 winbase.logMemoryStats();
840 oSession.signalTask();
841 self.oVBoxMgr.interruptWaitEvents();
842
843
844
845class TestDriver(base.TestDriver): # pylint: disable=too-many-instance-attributes
846 """
847 This is the VirtualBox test driver.
848 """
849
850 def __init__(self):
851 base.TestDriver.__init__(self);
852 self.fImportedVBoxApi = False;
853 self.fpApiVer = 3.2;
854 self.uRevision = 0;
855 self.uApiRevision = 0;
856 self.oBuild = None;
857 self.oVBoxMgr = None;
858 self.oVBox = None;
859 self.aoRemoteSessions = [];
860 self.aoVMs = []; ## @todo not sure if this list will be of any use.
861 self.oTestVmManager = vboxtestvms.TestVmManager(self.sResourcePath);
862 self.oTestVmSet = vboxtestvms.TestVmSet();
863 self.sSessionTypeDef = 'headless';
864 self.sSessionType = self.sSessionTypeDef;
865 self.fEnableVrdp = True;
866 self.uVrdpBasePortDef = 6000;
867 self.uVrdpBasePort = self.uVrdpBasePortDef;
868 self.sDefBridgedNic = None;
869 self.fUseDefaultSvc = False;
870 self.sLogSelfGroups = '';
871 self.sLogSelfFlags = 'time';
872 self.sLogSelfDest = '';
873 self.sLogSessionGroups = '';
874 self.sLogSessionFlags = 'time';
875 self.sLogSessionDest = '';
876 self.sLogSvcGroups = '';
877 self.sLogSvcFlags = 'time';
878 self.sLogSvcDest = '';
879 self.sSelfLogFile = None;
880 self.sVBoxSvcLogFile = None;
881 self.oVBoxSvcProcess = None;
882 self.sVBoxSvcPidFile = None;
883 self.fVBoxSvcInDebugger = False;
884 self.fVBoxSvcWaitForDebugger = False;
885 self.sVBoxValidationKit = None;
886 self.sVBoxValidationKitIso = None;
887 self.sVBoxBootSectors = None;
888 self.fAlwaysUploadLogs = False;
889 self.fAlwaysUploadScreenshots = False;
890 self.fEnableDebugger = True;
891
892 # Drop LD_PRELOAD and enable memory leak detection in LSAN_OPTIONS from vboxinstall.py
893 # before doing build detection. This is a little crude and inflexible...
894 if 'LD_PRELOAD' in os.environ:
895 del os.environ['LD_PRELOAD'];
896 if 'LSAN_OPTIONS' in os.environ:
897 asLSanOptions = os.environ['LSAN_OPTIONS'].split(':');
898 try: asLSanOptions.remove('detect_leaks=0');
899 except: pass;
900 if asLSanOptions: os.environ['LSAN_OPTIONS'] = ':'.join(asLSanOptions);
901 else: del os.environ['LSAN_OPTIONS'];
902
903 # Quietly detect build and validation kit.
904 self._detectBuild(False);
905 self._detectValidationKit(False);
906
907 # Make sure all debug logs goes to the scratch area unless
908 # specified otherwise (more of this later on).
909 if 'VBOX_LOG_DEST' not in os.environ:
910 os.environ['VBOX_LOG_DEST'] = 'nodeny dir=%s' % (self.sScratchPath);
911
912
913 def _detectBuild(self, fQuiet = False):
914 """
915 This is used internally to try figure a locally installed build when
916 running tests manually.
917 """
918 if self.oBuild is not None:
919 return True;
920
921 # Try dev build first since that's where I'll be using it first...
922 if True is True: # pylint: disable=comparison-with-itself
923 try:
924 self.oBuild = Build(self, None);
925 reporter.log('VBox %s build at %s (%s).'
926 % (self.oBuild.sType, self.oBuild.sInstallPath, self.oBuild.sDesignation,));
927 return True;
928 except base.GenError:
929 pass;
930
931 # Try default installation locations.
932 if self.sHost == 'win':
933 sProgFiles = os.environ.get('ProgramFiles', 'C:\\Program Files');
934 asLocs = [
935 os.path.join(sProgFiles, 'Oracle', 'VirtualBox'),
936 os.path.join(sProgFiles, 'OracleVM', 'VirtualBox'),
937 os.path.join(sProgFiles, 'Sun', 'VirtualBox'),
938 ];
939 elif self.sHost == 'solaris':
940 asLocs = [ '/opt/VirtualBox-3.2', '/opt/VirtualBox-3.1', '/opt/VirtualBox-3.0', '/opt/VirtualBox' ];
941 elif self.sHost == 'darwin':
942 asLocs = [ '/Applications/VirtualBox.app/Contents/MacOS' ];
943 elif self.sHost == 'linux':
944 asLocs = [ '/opt/VirtualBox-3.2', '/opt/VirtualBox-3.1', '/opt/VirtualBox-3.0', '/opt/VirtualBox' ];
945 else:
946 asLocs = [ '/opt/VirtualBox' ];
947 if 'VBOX_INSTALL_PATH' in os.environ:
948 asLocs.insert(0, os.environ['VBOX_INSTALL_PATH']);
949
950 for sLoc in asLocs:
951 try:
952 self.oBuild = Build(self, sLoc);
953 reporter.log('VBox %s build at %s (%s).'
954 % (self.oBuild.sType, self.oBuild.sInstallPath, self.oBuild.sDesignation,));
955 return True;
956 except base.GenError:
957 pass;
958
959 if not fQuiet:
960 reporter.error('failed to find VirtualBox installation');
961 return False;
962
963 def _detectValidationKit(self, fQuiet = False):
964 """
965 This is used internally by the constructor to try locate an unzipped
966 VBox Validation Kit somewhere in the immediate proximity.
967 """
968 if self.sVBoxValidationKit is not None:
969 return True;
970
971 #
972 # Normally it's found where we're running from, which is the same as
973 # the script directly on the testboxes.
974 #
975 asCandidates = [self.sScriptPath, ];
976 if g_ksValidationKitDir not in asCandidates:
977 asCandidates.append(g_ksValidationKitDir);
978 if os.getcwd() not in asCandidates:
979 asCandidates.append(os.getcwd());
980 if self.oBuild is not None and self.oBuild.sInstallPath not in asCandidates:
981 asCandidates.append(self.oBuild.sInstallPath);
982
983 #
984 # When working out of the tree, we'll search the current directory
985 # as well as parent dirs.
986 #
987 for sDir in list(asCandidates):
988 for i in range(10):
989 sDir = os.path.dirname(sDir);
990 if sDir not in asCandidates:
991 asCandidates.append(sDir);
992
993 #
994 # Do the searching.
995 #
996 sCandidate = None;
997 for i, _ in enumerate(asCandidates):
998 sCandidate = asCandidates[i];
999 if os.path.isfile(os.path.join(sCandidate, 'VBoxValidationKit.iso')):
1000 break;
1001 sCandidate = os.path.join(sCandidate, 'validationkit');
1002 if os.path.isfile(os.path.join(sCandidate, 'VBoxValidationKit.iso')):
1003 break;
1004 sCandidate = None;
1005
1006 fRc = sCandidate is not None;
1007 if fRc is False:
1008 if not fQuiet:
1009 reporter.error('failed to find VBox Validation Kit installation (candidates: %s)' % (asCandidates,));
1010 sCandidate = os.path.join(self.sScriptPath, 'validationkit'); # Don't leave the values as None.
1011
1012 #
1013 # Set the member values.
1014 #
1015 self.sVBoxValidationKit = sCandidate;
1016 self.sVBoxValidationKitIso = os.path.join(sCandidate, 'VBoxValidationKit.iso');
1017 self.sVBoxBootSectors = os.path.join(sCandidate, 'bootsectors');
1018 return fRc;
1019
1020 def _makeEnvironmentChanges(self):
1021 """
1022 Make the necessary VBox related environment changes.
1023 Children not importing the VBox API should call this.
1024 """
1025 # Make sure we've got our own VirtualBox config and VBoxSVC (on XPCOM at least).
1026 if not self.fUseDefaultSvc:
1027 os.environ['VBOX_USER_HOME'] = os.path.join(self.sScratchPath, 'VBoxUserHome');
1028 sUser = os.environ.get('USERNAME', os.environ.get('USER', os.environ.get('LOGNAME', 'unknown')));
1029 os.environ['VBOX_IPC_SOCKETID'] = sUser + '-VBoxTest';
1030 return True;
1031
1032 @staticmethod
1033 def makeApiRevision(uMajor, uMinor, uBuild, uApiRevision):
1034 """ Calculates an API revision number. """
1035 return (long(uMajor) << 56) | (long(uMinor) << 48) | (long(uBuild) << 40) | uApiRevision;
1036
1037 def importVBoxApi(self):
1038 """
1039 Import the 'vboxapi' module from the VirtualBox build we're using and
1040 instantiate the two basic objects.
1041
1042 This will try detect an development or installed build if no build has
1043 been associated with the driver yet.
1044 """
1045 if self.fImportedVBoxApi:
1046 return True;
1047
1048 self._makeEnvironmentChanges();
1049
1050 # Do the detecting.
1051 self._detectBuild();
1052 if self.oBuild is None:
1053 return False;
1054
1055 # Avoid crashing when loading the 32-bit module (or whatever it is that goes bang).
1056 if self.oBuild.sArch == 'x86' \
1057 and self.sHost == 'darwin' \
1058 and platform.architecture()[0] == '64bit' \
1059 and self.oBuild.sKind == 'development' \
1060 and os.getenv('VERSIONER_PYTHON_PREFER_32_BIT') != 'yes':
1061 reporter.log("WARNING: 64-bit python on darwin, 32-bit VBox development build => crash");
1062 reporter.log("WARNING: bash-3.2$ /usr/bin/python2.5 ./testdriver");
1063 reporter.log("WARNING: or");
1064 reporter.log("WARNING: bash-3.2$ VERSIONER_PYTHON_PREFER_32_BIT=yes ./testdriver");
1065 return False;
1066
1067 # Start VBoxSVC and load the vboxapi bits.
1068 if self._startVBoxSVC() is True:
1069 assert(self.oVBoxSvcProcess is not None);
1070
1071 sSavedSysPath = sys.path;
1072 self._setupVBoxApi();
1073 sys.path = sSavedSysPath;
1074
1075 # Adjust the default machine folder.
1076 if self.fImportedVBoxApi and not self.fUseDefaultSvc and self.fpApiVer >= 4.0:
1077 sNewFolder = os.path.join(self.sScratchPath, 'VBoxUserHome', 'Machines');
1078 try:
1079 self.oVBox.systemProperties.defaultMachineFolder = sNewFolder;
1080 except:
1081 self.fImportedVBoxApi = False;
1082 self.oVBoxMgr = None;
1083 self.oVBox = None;
1084 reporter.logXcpt("defaultMachineFolder exception (sNewFolder=%s)" % (sNewFolder,));
1085
1086 # Kill VBoxSVC on failure.
1087 if self.oVBoxMgr is None:
1088 self._stopVBoxSVC();
1089 else:
1090 assert(self.oVBoxSvcProcess is None);
1091 return self.fImportedVBoxApi;
1092
1093 def _startVBoxSVC(self): # pylint: disable=too-many-statements
1094 """ Starts VBoxSVC. """
1095 assert(self.oVBoxSvcProcess is None);
1096
1097 # Setup vbox logging for VBoxSVC now and start it manually. This way
1098 # we can control both logging and shutdown.
1099 self.sVBoxSvcLogFile = '%s/VBoxSVC-debug.log' % (self.sScratchPath,);
1100 try: os.remove(self.sVBoxSvcLogFile);
1101 except: pass;
1102 os.environ['VBOX_LOG'] = self.sLogSvcGroups;
1103 os.environ['VBOX_LOG_FLAGS'] = '%s append' % (self.sLogSvcFlags,); # Append becuse of VBoxXPCOMIPCD.
1104 if self.sLogSvcDest:
1105 os.environ['VBOX_LOG_DEST'] = 'nodeny ' + self.sLogSvcDest;
1106 else:
1107 os.environ['VBOX_LOG_DEST'] = 'nodeny file=%s' % (self.sVBoxSvcLogFile,);
1108 os.environ['VBOXSVC_RELEASE_LOG_FLAGS'] = 'time append';
1109
1110 # Always leave a pid file behind so we can kill it during cleanup-before.
1111 self.sVBoxSvcPidFile = '%s/VBoxSVC.pid' % (self.sScratchPath,);
1112 fWritePidFile = True;
1113
1114 cMsFudge = 1;
1115 sVBoxSVC = '%s/VBoxSVC' % (self.oBuild.sInstallPath,); ## @todo .exe and stuff.
1116 if self.fVBoxSvcInDebugger:
1117 if self.sHost in ('darwin', 'freebsd', 'linux', 'solaris', ):
1118 # Start VBoxSVC in gdb in a new terminal.
1119 #sTerm = '/usr/bin/gnome-terminal'; - doesn't work, some fork+exec stuff confusing us.
1120 sTerm = '/usr/bin/xterm';
1121 if not os.path.isfile(sTerm): sTerm = '/usr/X11/bin/xterm';
1122 if not os.path.isfile(sTerm): sTerm = '/usr/X11R6/bin/xterm';
1123 if not os.path.isfile(sTerm): sTerm = '/usr/bin/xterm';
1124 if not os.path.isfile(sTerm): sTerm = 'xterm';
1125 sGdb = '/usr/bin/gdb';
1126 if not os.path.isfile(sGdb): sGdb = '/usr/local/bin/gdb';
1127 if not os.path.isfile(sGdb): sGdb = '/usr/sfw/bin/gdb';
1128 if not os.path.isfile(sGdb): sGdb = 'gdb';
1129 sGdbCmdLine = '%s --args %s --pidfile %s' % (sGdb, sVBoxSVC, self.sVBoxSvcPidFile);
1130 # Cool tweak to run performance analysis instead of gdb:
1131 #sGdb = '/usr/bin/valgrind';
1132 #sGdbCmdLine = '%s --tool=callgrind --collect-atstart=no -- %s --pidfile %s' \
1133 # % (sGdb, sVBoxSVC, self.sVBoxSvcPidFile);
1134 reporter.log('term="%s" gdb="%s"' % (sTerm, sGdbCmdLine));
1135 os.environ['SHELL'] = self.sOrgShell; # Non-working shell may cause gdb and/or the term problems.
1136 ## @todo -e is deprecated; use "-- <args>".
1137 self.oVBoxSvcProcess = base.Process.spawnp(sTerm, sTerm, '-e', sGdbCmdLine);
1138 os.environ['SHELL'] = self.sOurShell;
1139 if self.oVBoxSvcProcess is not None:
1140 reporter.log('Press enter or return after starting VBoxSVC in the debugger...');
1141 sys.stdin.read(1);
1142 fWritePidFile = False;
1143
1144 elif self.sHost == 'win':
1145 sWinDbg = 'c:\\Program Files\\Debugging Tools for Windows\\windbg.exe';
1146 if not os.path.isfile(sWinDbg): sWinDbg = 'c:\\Program Files\\Debugging Tools for Windows (x64)\\windbg.exe';
1147 if not os.path.isfile(sWinDbg): sWinDbg = 'c:\\Programme\\Debugging Tools for Windows\\windbg.exe'; # Localization rulez! pylint: disable=line-too-long
1148 if not os.path.isfile(sWinDbg): sWinDbg = 'c:\\Programme\\Debugging Tools for Windows (x64)\\windbg.exe';
1149 if not os.path.isfile(sWinDbg): sWinDbg = 'windbg'; # WinDbg must be in the path; better than nothing.
1150 # Assume that everything WinDbg needs is defined using the environment variables.
1151 # See WinDbg help for more information.
1152 reporter.log('windbg="%s"' % (sWinDbg));
1153 self.oVBoxSvcProcess = base.Process.spawn(sWinDbg, sWinDbg, sVBoxSVC + base.exeSuff());
1154 if self.oVBoxSvcProcess is not None:
1155 reporter.log('Press enter or return after starting VBoxSVC in the debugger...');
1156 sys.stdin.read(1);
1157 fWritePidFile = False;
1158 ## @todo add a pipe interface similar to xpcom if feasible, i.e. if
1159 # we can get actual handle values for pipes in python.
1160
1161 else:
1162 reporter.error('Port me!');
1163 else: # Run without a debugger attached.
1164 if self.sHost in ('darwin', 'freebsd', 'linux', 'solaris', ):
1165 #
1166 # XPCOM - We can use a pipe to let VBoxSVC notify us when it's ready.
1167 #
1168 iPipeR, iPipeW = os.pipe();
1169 if hasattr(os, 'set_inheritable'):
1170 os.set_inheritable(iPipeW, True); # pylint: disable=no-member
1171 os.environ['NSPR_INHERIT_FDS'] = 'vboxsvc:startup-pipe:5:0x%x' % (iPipeW,);
1172 reporter.log2("NSPR_INHERIT_FDS=%s" % (os.environ['NSPR_INHERIT_FDS']));
1173
1174 self.oVBoxSvcProcess = base.Process.spawn(sVBoxSVC, sVBoxSVC, '--auto-shutdown'); # SIGUSR1 requirement.
1175 try: # Try make sure we get the SIGINT and not VBoxSVC.
1176 os.setpgid(self.oVBoxSvcProcess.getPid(), 0); # pylint: disable=no-member
1177 os.setpgid(0, 0); # pylint: disable=no-member
1178 except:
1179 reporter.logXcpt();
1180
1181 os.close(iPipeW);
1182 try:
1183 sResponse = os.read(iPipeR, 32);
1184 except:
1185 reporter.logXcpt();
1186 sResponse = None;
1187 os.close(iPipeR);
1188
1189 if hasattr(sResponse, 'decode'):
1190 sResponse = sResponse.decode('utf-8', 'ignore');
1191
1192 if sResponse is None or sResponse.strip() != 'READY':
1193 reporter.error('VBoxSVC failed starting up... (sResponse=%s)' % (sResponse,));
1194 if not self.oVBoxSvcProcess.wait(5000):
1195 self.oVBoxSvcProcess.terminate();
1196 self.oVBoxSvcProcess.wait(5000);
1197 self.oVBoxSvcProcess = None;
1198
1199 elif self.sHost == 'win':
1200 #
1201 # Windows - Just fudge it for now.
1202 #
1203 cMsFudge = 2000;
1204 self.oVBoxSvcProcess = base.Process.spawn(sVBoxSVC, sVBoxSVC);
1205
1206 else:
1207 reporter.error('Port me!');
1208
1209 #
1210 # Enable automatic crash reporting if we succeeded.
1211 #
1212 if self.oVBoxSvcProcess is not None:
1213 self.oVBoxSvcProcess.enableCrashReporting('crash/report/svc', 'crash/dump/svc');
1214
1215 #
1216 # Wait for debugger to attach.
1217 #
1218 if self.oVBoxSvcProcess is not None and self.fVBoxSvcWaitForDebugger:
1219 reporter.log('Press any key after attaching to VBoxSVC (pid %s) with a debugger...'
1220 % (self.oVBoxSvcProcess.getPid(),));
1221 sys.stdin.read(1);
1222
1223 #
1224 # Fudge and pid file.
1225 #
1226 if self.oVBoxSvcProcess is not None and not self.oVBoxSvcProcess.wait(cMsFudge):
1227 if fWritePidFile:
1228 iPid = self.oVBoxSvcProcess.getPid();
1229 try:
1230 oFile = utils.openNoInherit(self.sVBoxSvcPidFile, "w+");
1231 oFile.write('%s' % (iPid,));
1232 oFile.close();
1233 except:
1234 reporter.logXcpt('sPidFile=%s' % (self.sVBoxSvcPidFile,));
1235 reporter.log('VBoxSVC PID=%u' % (iPid,));
1236
1237 #
1238 # Finally add the task so we'll notice when it dies in a relatively timely manner.
1239 #
1240 self.addTask(self.oVBoxSvcProcess);
1241 else:
1242 self.oVBoxSvcProcess = None;
1243 try: os.remove(self.sVBoxSvcPidFile);
1244 except: pass;
1245
1246 return self.oVBoxSvcProcess is not None;
1247
1248
1249 def _killVBoxSVCByPidFile(self, sPidFile):
1250 """ Kill a VBoxSVC given the pid from it's pid file. """
1251
1252 # Read the pid file.
1253 if not os.path.isfile(sPidFile):
1254 return False;
1255 try:
1256 oFile = utils.openNoInherit(sPidFile, "r");
1257 sPid = oFile.readline().strip();
1258 oFile.close();
1259 except:
1260 reporter.logXcpt('sPidfile=%s' % (sPidFile,));
1261 return False;
1262
1263 # Convert the pid to an integer and validate the range a little bit.
1264 try:
1265 iPid = long(sPid);
1266 except:
1267 reporter.logXcpt('sPidfile=%s sPid="%s"' % (sPidFile, sPid));
1268 return False;
1269 if iPid <= 0:
1270 reporter.log('negative pid - sPidfile=%s sPid="%s" iPid=%d' % (sPidFile, sPid, iPid));
1271 return False;
1272
1273 # Take care checking that it's VBoxSVC we're about to inhume.
1274 if base.processCheckPidAndName(iPid, "VBoxSVC") is not True:
1275 reporter.log('Ignoring stale VBoxSVC pid file (pid=%s)' % (iPid,));
1276 return False;
1277
1278 # Loop thru our different ways of getting VBoxSVC to terminate.
1279 for aHow in [ [ base.sendUserSignal1, 5000, 'Dropping VBoxSVC a SIGUSR1 hint...'], \
1280 [ base.processInterrupt, 5000, 'Dropping VBoxSVC a SIGINT hint...'], \
1281 [ base.processTerminate, 7500, 'VBoxSVC is still around, killing it...'] ]:
1282 reporter.log(aHow[2]);
1283 if aHow[0](iPid) is True:
1284 msStart = base.timestampMilli();
1285 while base.timestampMilli() - msStart < 5000 \
1286 and base.processExists(iPid):
1287 time.sleep(0.2);
1288
1289 fRc = not base.processExists(iPid);
1290 if fRc is True:
1291 break;
1292 if fRc:
1293 reporter.log('Successfully killed VBoxSVC (pid=%s)' % (iPid,));
1294 else:
1295 reporter.log('Failed to kill VBoxSVC (pid=%s)' % (iPid,));
1296 return fRc;
1297
1298 def _stopVBoxSVC(self):
1299 """
1300 Stops VBoxSVC. Try the polite way first.
1301 """
1302
1303 if self.oVBoxSvcProcess:
1304 self.removeTask(self.oVBoxSvcProcess);
1305 self.oVBoxSvcProcess.enableCrashReporting(None, None); # Disables it.
1306
1307 fRc = False;
1308 if self.oVBoxSvcProcess is not None \
1309 and not self.fVBoxSvcInDebugger:
1310 # by process object.
1311 if self.oVBoxSvcProcess.isRunning():
1312 reporter.log('Dropping VBoxSVC a SIGUSR1 hint...');
1313 if not self.oVBoxSvcProcess.sendUserSignal1() \
1314 or not self.oVBoxSvcProcess.wait(5000):
1315 reporter.log('Dropping VBoxSVC a SIGINT hint...');
1316 if not self.oVBoxSvcProcess.interrupt() \
1317 or not self.oVBoxSvcProcess.wait(5000):
1318 reporter.log('VBoxSVC is still around, killing it...');
1319 self.oVBoxSvcProcess.terminate();
1320 self.oVBoxSvcProcess.wait(7500);
1321 else:
1322 reporter.log('VBoxSVC is no longer running...');
1323
1324 if not self.oVBoxSvcProcess.isRunning():
1325 iExit = self.oVBoxSvcProcess.getExitCode();
1326 if iExit != 0 or not self.oVBoxSvcProcess.isNormalExit():
1327 reporter.error("VBoxSVC exited with status %d (%#x)" % (iExit, self.oVBoxSvcProcess.uExitCode));
1328 self.oVBoxSvcProcess = None;
1329 else:
1330 # by pid file.
1331 self._killVBoxSVCByPidFile('%s/VBoxSVC.pid' % (self.sScratchPath,));
1332 return fRc;
1333
1334 def _setupVBoxApi(self):
1335 """
1336 Import and set up the vboxapi.
1337 The caller saves and restores sys.path.
1338 """
1339
1340 # Setup vbox logging for self (the test driver).
1341 self.sSelfLogFile = '%s/VBoxTestDriver.log' % (self.sScratchPath,);
1342 try: os.remove(self.sSelfLogFile);
1343 except: pass;
1344 os.environ['VBOX_LOG'] = self.sLogSelfGroups;
1345 os.environ['VBOX_LOG_FLAGS'] = '%s append' % (self.sLogSelfFlags, );
1346 if self.sLogSelfDest:
1347 os.environ['VBOX_LOG_DEST'] = 'nodeny ' + self.sLogSelfDest;
1348 else:
1349 os.environ['VBOX_LOG_DEST'] = 'nodeny file=%s' % (self.sSelfLogFile,);
1350 os.environ['VBOX_RELEASE_LOG_FLAGS'] = 'time append';
1351
1352 # Hack the sys.path + environment so the vboxapi can be found.
1353 sys.path.insert(0, self.oBuild.sInstallPath);
1354 if self.oBuild.sSdkPath is not None:
1355 sys.path.insert(0, os.path.join(self.oBuild.sSdkPath, 'installer'))
1356 sys.path.insert(1, os.path.join(self.oBuild.sSdkPath, 'install')); # stupid stupid windows installer!
1357 sys.path.insert(2, os.path.join(self.oBuild.sSdkPath, 'bindings', 'xpcom', 'python'))
1358 os.environ['VBOX_PROGRAM_PATH'] = self.oBuild.sInstallPath;
1359 reporter.log("sys.path: %s" % (sys.path));
1360
1361 try:
1362 from vboxapi import VirtualBoxManager; # pylint: disable=import-error
1363 except:
1364 reporter.logXcpt('Error importing vboxapi');
1365 return False;
1366
1367 # Exception and error hacks.
1368 try:
1369 # pylint: disable=import-error
1370 if self.sHost == 'win':
1371 from pythoncom import com_error as NativeComExceptionClass # pylint: disable=no-name-in-module
1372 import winerror as NativeComErrorClass
1373 else:
1374 from xpcom import Exception as NativeComExceptionClass
1375 from xpcom import nsError as NativeComErrorClass
1376 # pylint: enable=import-error
1377 except:
1378 reporter.logXcpt('Error importing (XP)COM related stuff for exception hacks and errors');
1379 return False;
1380 __deployExceptionHacks__(NativeComExceptionClass)
1381 ComError.copyErrors(NativeComErrorClass);
1382
1383 # Create the manager.
1384 try:
1385 self.oVBoxMgr = VirtualBoxManager(None, None)
1386 except:
1387 self.oVBoxMgr = None;
1388 reporter.logXcpt('VirtualBoxManager exception');
1389 return False;
1390
1391 # Figure the API version.
1392 try:
1393 oVBox = self.oVBoxMgr.getVirtualBox();
1394
1395 try:
1396 sVer = oVBox.version;
1397 except:
1398 reporter.logXcpt('Failed to get VirtualBox version, assuming 4.0.0');
1399 sVer = "4.0.0";
1400 reporter.log("IVirtualBox.version=%s" % (sVer,));
1401
1402 # Convert the string to three integer values and check ranges.
1403 asVerComponents = sVer.split('.');
1404 try:
1405 sLast = asVerComponents[2].split('_')[0].split('r')[0];
1406 aiVerComponents = (int(asVerComponents[0]), int(asVerComponents[1]), int(sLast));
1407 except:
1408 raise base.GenError('Malformed version "%s"' % (sVer,));
1409 if aiVerComponents[0] < 3 or aiVerComponents[0] > 19:
1410 raise base.GenError('Malformed version "%s" - 1st component is out of bounds 3..19: %u'
1411 % (sVer, aiVerComponents[0]));
1412 if aiVerComponents[1] < 0 or aiVerComponents[1] > 9:
1413 raise base.GenError('Malformed version "%s" - 2nd component is out of bounds 0..9: %u'
1414 % (sVer, aiVerComponents[1]));
1415 if aiVerComponents[2] < 0 or aiVerComponents[2] > 99:
1416 raise base.GenError('Malformed version "%s" - 3rd component is out of bounds 0..99: %u'
1417 % (sVer, aiVerComponents[2]));
1418
1419 # Convert the three integers into a floating point value. The API is stable within a
1420 # x.y release, so the third component only indicates whether it's a stable or
1421 # development build of the next release.
1422 self.fpApiVer = aiVerComponents[0] + 0.1 * aiVerComponents[1];
1423 if aiVerComponents[2] >= 51:
1424 if self.fpApiVer not in [6.1, 5.2, 4.3, 3.2,]:
1425 self.fpApiVer += 0.1;
1426 else:
1427 self.fpApiVer = int(self.fpApiVer) + 1.0;
1428 # fudge value to be always bigger than the nominal value (0.1 gets rounded down)
1429 if round(self.fpApiVer, 1) > self.fpApiVer:
1430 self.fpApiVer += sys.float_info.epsilon * self.fpApiVer / 2.0;
1431
1432 try:
1433 self.uRevision = oVBox.revision;
1434 except:
1435 reporter.logXcpt('Failed to get VirtualBox revision, assuming 0');
1436 self.uRevision = 0;
1437 reporter.log("IVirtualBox.revision=%u" % (self.uRevision,));
1438
1439 try:
1440 self.uApiRevision = oVBox.APIRevision;
1441 except:
1442 reporter.logXcpt('Failed to get VirtualBox APIRevision, faking it.');
1443 self.uApiRevision = self.makeApiRevision(aiVerComponents[0], aiVerComponents[1], aiVerComponents[2], 0);
1444 reporter.log("IVirtualBox.APIRevision=%#x" % (self.uApiRevision,));
1445
1446 # Patch VBox manage to gloss over portability issues (error constants, etc).
1447 self._patchVBoxMgr();
1448
1449 # Wrap oVBox.
1450 from testdriver.vboxwrappers import VirtualBoxWrapper;
1451 self.oVBox = VirtualBoxWrapper(oVBox, self.oVBoxMgr, self.fpApiVer, self);
1452
1453 # Install the constant wrapping hack.
1454 vboxcon.goHackModuleClass.oVBoxMgr = self.oVBoxMgr; # VBoxConstantWrappingHack.
1455 vboxcon.fpApiVer = self.fpApiVer;
1456 reporter.setComXcptFormatter(formatComOrXpComException);
1457
1458 except:
1459 self.oVBoxMgr = None;
1460 self.oVBox = None;
1461 reporter.logXcpt("getVirtualBox / API version exception");
1462 return False;
1463
1464 # Done
1465 self.fImportedVBoxApi = True;
1466 reporter.log('Found version %s (%s)' % (self.fpApiVer, sVer));
1467 return True;
1468
1469 def _patchVBoxMgr(self):
1470 """
1471 Glosses over missing self.oVBoxMgr methods on older VBox versions.
1472 """
1473
1474 def _xcptGetResult(oSelf, oXcpt = None):
1475 """ See vboxapi. """
1476 _ = oSelf;
1477 if oXcpt is None: oXcpt = sys.exc_info()[1];
1478 if sys.platform == 'win32':
1479 import winerror; # pylint: disable=import-error
1480 hrXcpt = oXcpt.hresult;
1481 if hrXcpt == winerror.DISP_E_EXCEPTION:
1482 hrXcpt = oXcpt.excepinfo[5];
1483 else:
1484 hrXcpt = oXcpt.error;
1485 return hrXcpt;
1486
1487 def _xcptIsDeadInterface(oSelf, oXcpt = None):
1488 """ See vboxapi. """
1489 return oSelf.xcptGetStatus(oXcpt) in [
1490 0x80004004, -2147467260, # NS_ERROR_ABORT
1491 0x800706be, -2147023170, # NS_ERROR_CALL_FAILED (RPC_S_CALL_FAILED)
1492 0x800706ba, -2147023174, # RPC_S_SERVER_UNAVAILABLE.
1493 0x800706be, -2147023170, # RPC_S_CALL_FAILED.
1494 0x800706bf, -2147023169, # RPC_S_CALL_FAILED_DNE.
1495 0x80010108, -2147417848, # RPC_E_DISCONNECTED.
1496 0x800706b5, -2147023179, # RPC_S_UNKNOWN_IF
1497 ];
1498
1499 def _xcptIsOurXcptKind(oSelf, oXcpt = None):
1500 """ See vboxapi. """
1501 _ = oSelf;
1502 if oXcpt is None: oXcpt = sys.exc_info()[1];
1503 if sys.platform == 'win32':
1504 from pythoncom import com_error as NativeComExceptionClass # pylint: disable=import-error,no-name-in-module
1505 else:
1506 from xpcom import Exception as NativeComExceptionClass # pylint: disable=import-error
1507 return isinstance(oXcpt, NativeComExceptionClass);
1508
1509 def _xcptIsEqual(oSelf, oXcpt, hrStatus):
1510 """ See vboxapi. """
1511 hrXcpt = oSelf.xcptGetResult(oXcpt);
1512 return hrXcpt == hrStatus or hrXcpt == hrStatus - 0x100000000; # pylint: disable=consider-using-in
1513
1514 def _xcptToString(oSelf, oXcpt):
1515 """ See vboxapi. """
1516 _ = oSelf;
1517 if oXcpt is None: oXcpt = sys.exc_info()[1];
1518 return str(oXcpt);
1519
1520 def _getEnumValueName(oSelf, sEnumTypeNm, oEnumValue, fTypePrefix = False):
1521 """ See vboxapi. """
1522 _ = oSelf; _ = fTypePrefix;
1523 return '%s::%s' % (sEnumTypeNm, oEnumValue);
1524
1525 # Add utilities found in newer vboxapi revision.
1526 if not hasattr(self.oVBoxMgr, 'xcptIsDeadInterface'):
1527 import types;
1528 self.oVBoxMgr.xcptGetResult = types.MethodType(_xcptGetResult, self.oVBoxMgr);
1529 self.oVBoxMgr.xcptIsDeadInterface = types.MethodType(_xcptIsDeadInterface, self.oVBoxMgr);
1530 self.oVBoxMgr.xcptIsOurXcptKind = types.MethodType(_xcptIsOurXcptKind, self.oVBoxMgr);
1531 self.oVBoxMgr.xcptIsEqual = types.MethodType(_xcptIsEqual, self.oVBoxMgr);
1532 self.oVBoxMgr.xcptToString = types.MethodType(_xcptToString, self.oVBoxMgr);
1533 if not hasattr(self.oVBoxMgr, 'getEnumValueName'):
1534 import types;
1535 self.oVBoxMgr.getEnumValueName = types.MethodType(_getEnumValueName, self.oVBoxMgr);
1536
1537
1538 def _teardownVBoxApi(self): # pylint: disable=too-many-statements
1539 """
1540 Drop all VBox object references and shutdown com/xpcom.
1541 """
1542 if not self.fImportedVBoxApi:
1543 return True;
1544 import gc;
1545
1546 # Drop all references we've have to COM objects.
1547 self.aoRemoteSessions = [];
1548 self.aoVMs = [];
1549 self.oVBoxMgr = None;
1550 self.oVBox = None;
1551 vboxcon.goHackModuleClass.oVBoxMgr = None; # VBoxConstantWrappingHack.
1552 reporter.setComXcptFormatter(None);
1553
1554 # Do garbage collection to try get rid of those objects.
1555 try:
1556 gc.collect();
1557 except:
1558 reporter.logXcpt();
1559 self.fImportedVBoxApi = False;
1560
1561 # Check whether the python is still having any COM objects/interfaces around.
1562 cVBoxMgrs = 0;
1563 aoObjsLeftBehind = [];
1564 if self.sHost == 'win':
1565 import pythoncom; # pylint: disable=import-error
1566 try:
1567 cIfs = pythoncom._GetInterfaceCount(); # pylint: disable=no-member,protected-access
1568 cObjs = pythoncom._GetGatewayCount(); # pylint: disable=no-member,protected-access
1569 if cObjs == 0 and cIfs == 0:
1570 reporter.log('_teardownVBoxApi: no interfaces or objects left behind.');
1571 else:
1572 reporter.log('_teardownVBoxApi: Python COM still has %s objects and %s interfaces...' % ( cObjs, cIfs));
1573
1574 from win32com.client import DispatchBaseClass; # pylint: disable=import-error
1575 for oObj in gc.get_objects():
1576 if isinstance(oObj, DispatchBaseClass):
1577 reporter.log('_teardownVBoxApi: %s' % (oObj,));
1578 aoObjsLeftBehind.append(oObj);
1579 elif utils.getObjectTypeName(oObj) == 'VirtualBoxManager':
1580 reporter.log('_teardownVBoxApi: %s' % (oObj,));
1581 cVBoxMgrs += 1;
1582 aoObjsLeftBehind.append(oObj);
1583 oObj = None;
1584 except:
1585 reporter.logXcpt();
1586
1587 # If not being used, we can safely uninitialize COM.
1588 if cIfs == 0 and cObjs == 0 and cVBoxMgrs == 0 and not aoObjsLeftBehind:
1589 reporter.log('_teardownVBoxApi: Calling CoUninitialize...');
1590 try: pythoncom.CoUninitialize(); # pylint: disable=no-member
1591 except: reporter.logXcpt();
1592 else:
1593 reporter.log('_teardownVBoxApi: Returned from CoUninitialize.');
1594 else:
1595 try:
1596 # XPCOM doesn't crash and burn like COM if you shut it down with interfaces and objects around.
1597 # Also, it keeps a number of internal objects and interfaces around to do its job, so shutting
1598 # it down before we go looking for dangling interfaces is more or less required.
1599 from xpcom import _xpcom as _xpcom; # pylint: disable=import-error,useless-import-alias
1600 hrc = _xpcom.DeinitCOM();
1601 cIfs = _xpcom._GetInterfaceCount(); # pylint: disable=protected-access
1602 cObjs = _xpcom._GetGatewayCount(); # pylint: disable=protected-access
1603
1604 if cObjs == 0 and cIfs == 0:
1605 reporter.log('_teardownVBoxApi: No XPCOM interfaces or objects active. (hrc=%#x)' % (hrc,));
1606 else:
1607 reporter.log('_teardownVBoxApi: %s XPCOM objects and %s interfaces still around! (hrc=%#x)'
1608 % (cObjs, cIfs, hrc));
1609 if hasattr(_xpcom, '_DumpInterfaces'):
1610 try: _xpcom._DumpInterfaces(); # pylint: disable=protected-access
1611 except: reporter.logXcpt('_teardownVBoxApi: _DumpInterfaces failed');
1612
1613 from xpcom.client import Component; # pylint: disable=import-error
1614 for oObj in gc.get_objects():
1615 if isinstance(oObj, Component):
1616 reporter.log('_teardownVBoxApi: %s' % (oObj,));
1617 aoObjsLeftBehind.append(oObj);
1618 if utils.getObjectTypeName(oObj) == 'VirtualBoxManager':
1619 reporter.log('_teardownVBoxApi: %s' % (oObj,));
1620 cVBoxMgrs += 1;
1621 aoObjsLeftBehind.append(oObj);
1622 oObj = None;
1623 except:
1624 reporter.logXcpt();
1625
1626 # Try get the referrers to (XP)COM interfaces and objects that was left behind.
1627 for iObj in range(len(aoObjsLeftBehind)): # pylint: disable=consider-using-enumerate
1628 try:
1629 aoReferrers = gc.get_referrers(aoObjsLeftBehind[iObj]);
1630 reporter.log('_teardownVBoxApi: Found %u referrers to %s:' % (len(aoReferrers), aoObjsLeftBehind[iObj],));
1631 for oReferrer in aoReferrers:
1632 oMyFrame = sys._getframe(0); # pylint: disable=protected-access
1633 if oReferrer is oMyFrame:
1634 reporter.log('_teardownVBoxApi: - frame of this function');
1635 elif oReferrer is aoObjsLeftBehind:
1636 reporter.log('_teardownVBoxApi: - aoObjsLeftBehind');
1637 else:
1638 fPrinted = False;
1639 if isinstance(oReferrer, (dict, list, tuple)):
1640 try:
1641 aoSubReferreres = gc.get_referrers(oReferrer);
1642 for oSubRef in aoSubReferreres:
1643 if not isinstance(oSubRef, list) \
1644 and not isinstance(oSubRef, dict) \
1645 and oSubRef is not oMyFrame \
1646 and oSubRef is not aoSubReferreres:
1647 reporter.log('_teardownVBoxApi: - %s :: %s:'
1648 % (utils.getObjectTypeName(oSubRef), utils.getObjectTypeName(oReferrer)));
1649 fPrinted = True;
1650 break;
1651 del aoSubReferreres;
1652 except:
1653 reporter.logXcpt('subref');
1654 if not fPrinted:
1655 reporter.log('_teardownVBoxApi: - %s:' % (utils.getObjectTypeName(oReferrer),));
1656 try:
1657 import pprint;
1658 for sLine in pprint.pformat(oReferrer, width = 130).split('\n'):
1659 reporter.log('_teardownVBoxApi: %s' % (sLine,));
1660 except:
1661 reporter.log('_teardownVBoxApi: %s' % (oReferrer,));
1662 except:
1663 reporter.logXcpt();
1664 del aoObjsLeftBehind;
1665
1666 # Force garbage collection again, just for good measure.
1667 try:
1668 gc.collect();
1669 time.sleep(0.5); # fudge factor
1670 except:
1671 reporter.logXcpt();
1672 return True;
1673
1674 def _powerOffAllVms(self):
1675 """
1676 Tries to power off all running VMs.
1677 """
1678 for oSession in self.aoRemoteSessions:
1679 uPid = oSession.getPid();
1680 if uPid is not None:
1681 reporter.log('_powerOffAllVms: PID is %s for %s, trying to kill it.' % (uPid, oSession.sName,));
1682 base.processKill(uPid);
1683 else:
1684 reporter.log('_powerOffAllVms: No PID for %s' % (oSession.sName,));
1685 oSession.close();
1686 return None;
1687
1688
1689
1690 #
1691 # Build type, OS and arch getters.
1692 #
1693
1694 def getBuildType(self):
1695 """
1696 Get the build type.
1697 """
1698 if not self._detectBuild():
1699 return 'release';
1700 return self.oBuild.sType;
1701
1702 def getBuildOs(self):
1703 """
1704 Get the build OS.
1705 """
1706 if not self._detectBuild():
1707 return self.sHost;
1708 return self.oBuild.sOs;
1709
1710 def getBuildArch(self):
1711 """
1712 Get the build arch.
1713 """
1714 if not self._detectBuild():
1715 return self.sHostArch;
1716 return self.oBuild.sArch;
1717
1718 def getGuestAdditionsIso(self):
1719 """
1720 Get the path to the guest addition iso.
1721 """
1722 if not self._detectBuild():
1723 return None;
1724 return self.oBuild.sGuestAdditionsIso;
1725
1726 #
1727 # Override everything from the base class so the testdrivers don't have to
1728 # check whether we have overridden a method or not.
1729 #
1730
1731 def showUsage(self):
1732 rc = base.TestDriver.showUsage(self);
1733 reporter.log('');
1734 reporter.log('Generic VirtualBox Options:');
1735 reporter.log(' --vbox-session-type <type>');
1736 reporter.log(' Sets the session type. Typical values are: gui, headless, sdl');
1737 reporter.log(' Default: %s' % (self.sSessionTypeDef));
1738 reporter.log(' --vrdp, --no-vrdp');
1739 reporter.log(' Enables VRDP, ports starting at 6000');
1740 reporter.log(' Default: --vrdp');
1741 reporter.log(' --vrdp-base-port <port>');
1742 reporter.log(' Sets the base for VRDP port assignments.');
1743 reporter.log(' Default: %s' % (self.uVrdpBasePortDef));
1744 reporter.log(' --vbox-default-bridged-nic <interface>');
1745 reporter.log(' Sets the default interface for bridged networking.');
1746 reporter.log(' Default: autodetect');
1747 reporter.log(' --vbox-use-svc-defaults');
1748 reporter.log(' Use default locations and files for VBoxSVC. This is useful');
1749 reporter.log(' for automatically configuring the test VMs for debugging.');
1750 reporter.log(' --vbox-log');
1751 reporter.log(' The VBox logger group settings for everyone.');
1752 reporter.log(' --vbox-log-flags');
1753 reporter.log(' The VBox logger flags settings for everyone.');
1754 reporter.log(' --vbox-log-dest');
1755 reporter.log(' The VBox logger destination settings for everyone.');
1756 reporter.log(' --vbox-self-log');
1757 reporter.log(' The VBox logger group settings for the testdriver.');
1758 reporter.log(' --vbox-self-log-flags');
1759 reporter.log(' The VBox logger flags settings for the testdriver.');
1760 reporter.log(' --vbox-self-log-dest');
1761 reporter.log(' The VBox logger destination settings for the testdriver.');
1762 reporter.log(' --vbox-session-log');
1763 reporter.log(' The VM session logger group settings.');
1764 reporter.log(' --vbox-session-log-flags');
1765 reporter.log(' The VM session logger flags.');
1766 reporter.log(' --vbox-session-log-dest');
1767 reporter.log(' The VM session logger destination settings.');
1768 reporter.log(' --vbox-svc-log');
1769 reporter.log(' The VBoxSVC logger group settings.');
1770 reporter.log(' --vbox-svc-log-flags');
1771 reporter.log(' The VBoxSVC logger flag settings.');
1772 reporter.log(' --vbox-svc-log-dest');
1773 reporter.log(' The VBoxSVC logger destination settings.');
1774 reporter.log(' --vbox-svc-debug');
1775 reporter.log(' Start VBoxSVC in a debugger.');
1776 reporter.log(' --vbox-svc-wait-debug');
1777 reporter.log(' Start VBoxSVC and wait for debugger to attach to it.');
1778 reporter.log(' --vbox-always-upload-logs');
1779 reporter.log(' Whether to always upload log files, or only do so on failure.');
1780 reporter.log(' --vbox-always-upload-screenshots');
1781 reporter.log(' Whether to always upload final screen shots, or only do so on failure.');
1782 reporter.log(' --vbox-debugger, --no-vbox-debugger');
1783 reporter.log(' Enables the VBox debugger, port at 5000');
1784 reporter.log(' Default: --vbox-debugger');
1785 if self.oTestVmSet is not None:
1786 self.oTestVmSet.showUsage();
1787 return rc;
1788
1789 def parseOption(self, asArgs, iArg): # pylint: disable=too-many-statements
1790 if asArgs[iArg] == '--vbox-session-type':
1791 iArg += 1;
1792 if iArg >= len(asArgs):
1793 raise base.InvalidOption('The "--vbox-session-type" takes an argument');
1794 self.sSessionType = asArgs[iArg];
1795 elif asArgs[iArg] == '--vrdp':
1796 self.fEnableVrdp = True;
1797 elif asArgs[iArg] == '--no-vrdp':
1798 self.fEnableVrdp = False;
1799 elif asArgs[iArg] == '--vrdp-base-port':
1800 iArg += 1;
1801 if iArg >= len(asArgs):
1802 raise base.InvalidOption('The "--vrdp-base-port" takes an argument');
1803 try: self.uVrdpBasePort = int(asArgs[iArg]);
1804 except: raise base.InvalidOption('The "--vrdp-base-port" value "%s" is not a valid integer' % (asArgs[iArg],));
1805 if self.uVrdpBasePort <= 0 or self.uVrdpBasePort >= 65530:
1806 raise base.InvalidOption('The "--vrdp-base-port" value "%s" is not in the valid range (1..65530)'
1807 % (asArgs[iArg],));
1808 elif asArgs[iArg] == '--vbox-default-bridged-nic':
1809 iArg += 1;
1810 if iArg >= len(asArgs):
1811 raise base.InvalidOption('The "--vbox-default-bridged-nic" takes an argument');
1812 self.sDefBridgedNic = asArgs[iArg];
1813 elif asArgs[iArg] == '--vbox-use-svc-defaults':
1814 self.fUseDefaultSvc = True;
1815 elif asArgs[iArg] == '--vbox-self-log':
1816 iArg += 1;
1817 if iArg >= len(asArgs):
1818 raise base.InvalidOption('The "--vbox-self-log" takes an argument');
1819 self.sLogSelfGroups = asArgs[iArg];
1820 elif asArgs[iArg] == '--vbox-self-log-flags':
1821 iArg += 1;
1822 if iArg >= len(asArgs):
1823 raise base.InvalidOption('The "--vbox-self-log-flags" takes an argument');
1824 self.sLogSelfFlags = asArgs[iArg];
1825 elif asArgs[iArg] == '--vbox-self-log-dest':
1826 iArg += 1;
1827 if iArg >= len(asArgs):
1828 raise base.InvalidOption('The "--vbox-self-log-dest" takes an argument');
1829 self.sLogSelfDest = asArgs[iArg];
1830 elif asArgs[iArg] == '--vbox-session-log':
1831 iArg += 1;
1832 if iArg >= len(asArgs):
1833 raise base.InvalidOption('The "--vbox-session-log" takes an argument');
1834 self.sLogSessionGroups = asArgs[iArg];
1835 elif asArgs[iArg] == '--vbox-session-log-flags':
1836 iArg += 1;
1837 if iArg >= len(asArgs):
1838 raise base.InvalidOption('The "--vbox-session-log-flags" takes an argument');
1839 self.sLogSessionFlags = asArgs[iArg];
1840 elif asArgs[iArg] == '--vbox-session-log-dest':
1841 iArg += 1;
1842 if iArg >= len(asArgs):
1843 raise base.InvalidOption('The "--vbox-session-log-dest" takes an argument');
1844 self.sLogSessionDest = asArgs[iArg];
1845 elif asArgs[iArg] == '--vbox-svc-log':
1846 iArg += 1;
1847 if iArg >= len(asArgs):
1848 raise base.InvalidOption('The "--vbox-svc-log" takes an argument');
1849 self.sLogSvcGroups = asArgs[iArg];
1850 elif asArgs[iArg] == '--vbox-svc-log-flags':
1851 iArg += 1;
1852 if iArg >= len(asArgs):
1853 raise base.InvalidOption('The "--vbox-svc-log-flags" takes an argument');
1854 self.sLogSvcFlags = asArgs[iArg];
1855 elif asArgs[iArg] == '--vbox-svc-log-dest':
1856 iArg += 1;
1857 if iArg >= len(asArgs):
1858 raise base.InvalidOption('The "--vbox-svc-log-dest" takes an argument');
1859 self.sLogSvcDest = asArgs[iArg];
1860 elif asArgs[iArg] == '--vbox-log':
1861 iArg += 1;
1862 if iArg >= len(asArgs):
1863 raise base.InvalidOption('The "--vbox-log" takes an argument');
1864 self.sLogSelfGroups = asArgs[iArg];
1865 self.sLogSessionGroups = asArgs[iArg];
1866 self.sLogSvcGroups = asArgs[iArg];
1867 elif asArgs[iArg] == '--vbox-log-flags':
1868 iArg += 1;
1869 if iArg >= len(asArgs):
1870 raise base.InvalidOption('The "--vbox-svc-flags" takes an argument');
1871 self.sLogSelfFlags = asArgs[iArg];
1872 self.sLogSessionFlags = asArgs[iArg];
1873 self.sLogSvcFlags = asArgs[iArg];
1874 elif asArgs[iArg] == '--vbox-log-dest':
1875 iArg += 1;
1876 if iArg >= len(asArgs):
1877 raise base.InvalidOption('The "--vbox-log-dest" takes an argument');
1878 self.sLogSelfDest = asArgs[iArg];
1879 self.sLogSessionDest = asArgs[iArg];
1880 self.sLogSvcDest = asArgs[iArg];
1881 elif asArgs[iArg] == '--vbox-svc-debug':
1882 self.fVBoxSvcInDebugger = True;
1883 elif asArgs[iArg] == '--vbox-svc-wait-debug':
1884 self.fVBoxSvcWaitForDebugger = True;
1885 elif asArgs[iArg] == '--vbox-always-upload-logs':
1886 self.fAlwaysUploadLogs = True;
1887 elif asArgs[iArg] == '--vbox-always-upload-screenshots':
1888 self.fAlwaysUploadScreenshots = True;
1889 elif asArgs[iArg] == '--vbox-debugger':
1890 self.fEnableDebugger = True;
1891 elif asArgs[iArg] == '--no-vbox-debugger':
1892 self.fEnableDebugger = False;
1893 else:
1894 # Relevant for selecting VMs to test?
1895 if self.oTestVmSet is not None:
1896 iRc = self.oTestVmSet.parseOption(asArgs, iArg);
1897 if iRc != iArg:
1898 return iRc;
1899
1900 # Hand it to the base class.
1901 return base.TestDriver.parseOption(self, asArgs, iArg);
1902 return iArg + 1;
1903
1904 def completeOptions(self):
1905 return base.TestDriver.completeOptions(self);
1906
1907 def getNetworkAdapterNameFromType(self, oNic):
1908 """
1909 Returns the network adapter name from a given adapter type.
1910
1911 Returns an empty string if not found / invalid.
1912 """
1913 sAdpName = '';
1914 if oNic.adapterType == vboxcon.NetworkAdapterType_Am79C970A \
1915 or oNic.adapterType == vboxcon.NetworkAdapterType_Am79C973 \
1916 or oNic.adapterType == vboxcon.NetworkAdapterType_Am79C960:
1917 sAdpName = 'pcnet';
1918 elif oNic.adapterType == vboxcon.NetworkAdapterType_I82540EM \
1919 or oNic.adapterType == vboxcon.NetworkAdapterType_I82543GC \
1920 or oNic.adapterType == vboxcon.NetworkAdapterType_I82545EM:
1921 sAdpName = 'e1000';
1922 elif oNic.adapterType == vboxcon.NetworkAdapterType_Virtio:
1923 sAdpName = 'virtio-net';
1924 return sAdpName;
1925
1926 def getResourceSet(self):
1927 asRsrcs = [];
1928 if self.oTestVmSet is not None:
1929 asRsrcs.extend(self.oTestVmSet.getResourceSet());
1930 asRsrcs.extend(base.TestDriver.getResourceSet(self));
1931 return asRsrcs;
1932
1933 def actionExtract(self):
1934 return base.TestDriver.actionExtract(self);
1935
1936 def actionVerify(self):
1937 return base.TestDriver.actionVerify(self);
1938
1939 def actionConfig(self):
1940 return base.TestDriver.actionConfig(self);
1941
1942 def actionExecute(self):
1943 return base.TestDriver.actionExecute(self);
1944
1945 def actionCleanupBefore(self):
1946 """
1947 Kill any VBoxSVC left behind by a previous test run.
1948 """
1949 self._killVBoxSVCByPidFile('%s/VBoxSVC.pid' % (self.sScratchPath,));
1950 return base.TestDriver.actionCleanupBefore(self);
1951
1952 def actionCleanupAfter(self):
1953 """
1954 Clean up the VBox bits and then call the base driver.
1955
1956 If your test driver overrides this, it should normally call us at the
1957 end of the job.
1958 """
1959 cErrorsEntry = reporter.getErrorCount();
1960
1961 # Kill any left over VM processes.
1962 self._powerOffAllVms();
1963
1964 # Drop all VBox object references and shutdown xpcom then
1965 # terminating VBoxSVC, with extreme prejudice if need be.
1966 self._teardownVBoxApi();
1967 self._stopVBoxSVC();
1968
1969 # Add the VBoxSVC and testdriver debug+release log files.
1970 if self.fAlwaysUploadLogs or reporter.getErrorCount() > 0:
1971 if self.sVBoxSvcLogFile is not None and os.path.isfile(self.sVBoxSvcLogFile):
1972 reporter.addLogFile(self.sVBoxSvcLogFile, 'log/debug/svc', 'Debug log file for VBoxSVC');
1973 self.sVBoxSvcLogFile = None;
1974
1975 if self.sSelfLogFile is not None and os.path.isfile(self.sSelfLogFile):
1976 reporter.addLogFile(self.sSelfLogFile, 'log/debug/client', 'Debug log file for the test driver');
1977 self.sSelfLogFile = None;
1978
1979 sVBoxSvcRelLog = os.path.join(self.sScratchPath, 'VBoxUserHome', 'VBoxSVC.log');
1980 if os.path.isfile(sVBoxSvcRelLog):
1981 reporter.addLogFile(sVBoxSvcRelLog, 'log/release/svc', 'Release log file for VBoxSVC');
1982 for sSuff in [ '.1', '.2', '.3', '.4', '.5', '.6', '.7', '.8' ]:
1983 if os.path.isfile(sVBoxSvcRelLog + sSuff):
1984 reporter.addLogFile(sVBoxSvcRelLog + sSuff, 'log/release/svc', 'Release log file for VBoxSVC');
1985
1986 # Finally, call the base driver to wipe the scratch space.
1987 fRc = base.TestDriver.actionCleanupAfter(self);
1988
1989 # Flag failure if the error count increased.
1990 if reporter.getErrorCount() > cErrorsEntry:
1991 fRc = False;
1992 return fRc;
1993
1994
1995 def actionAbort(self):
1996 """
1997 Terminate VBoxSVC if we've got a pid file.
1998 """
1999 #
2000 # Take default action first, then kill VBoxSVC. The other way around
2001 # is problematic since the testscript would continue running and possibly
2002 # trigger a new VBoxSVC to start.
2003 #
2004 fRc1 = base.TestDriver.actionAbort(self);
2005 fRc2 = self._killVBoxSVCByPidFile('%s/VBoxSVC.pid' % (self.sScratchPath,));
2006 return fRc1 is True and fRc2 is True;
2007
2008 def onExit(self, iRc):
2009 """
2010 Stop VBoxSVC if we've started it.
2011 """
2012 if self.oVBoxSvcProcess is not None:
2013 reporter.log('*** Shutting down the VBox API... (iRc=%s)' % (iRc,));
2014 self._powerOffAllVms();
2015 self._teardownVBoxApi();
2016 self._stopVBoxSVC();
2017 reporter.log('*** VBox API shutdown done.');
2018 return base.TestDriver.onExit(self, iRc);
2019
2020
2021 #
2022 # Task wait method override.
2023 #
2024
2025 def notifyAboutReadyTask(self, oTask):
2026 """
2027 Overriding base.TestDriver.notifyAboutReadyTask.
2028 """
2029 try:
2030 self.oVBoxMgr.interruptWaitEvents();
2031 reporter.log2('vbox.notifyAboutReadyTask: called interruptWaitEvents');
2032 except:
2033 reporter.logXcpt('vbox.notifyAboutReadyTask');
2034 return base.TestDriver.notifyAboutReadyTask(self, oTask);
2035
2036 def waitForTasksSleepWorker(self, cMsTimeout):
2037 """
2038 Overriding base.TestDriver.waitForTasksSleepWorker.
2039 """
2040 try:
2041 rc = self.oVBoxMgr.waitForEvents(int(cMsTimeout));
2042 _ = rc; #reporter.log2('vbox.waitForTasksSleepWorker(%u): true (waitForEvents -> %s)' % (cMsTimeout, rc));
2043 reporter.doPollWork('vbox.TestDriver.waitForTasksSleepWorker');
2044 return True;
2045 except KeyboardInterrupt:
2046 raise;
2047 except:
2048 reporter.logXcpt('vbox.waitForTasksSleepWorker');
2049 return False;
2050
2051 #
2052 # Utility methods.
2053 #
2054
2055 def processEvents(self, cMsTimeout = 0):
2056 """
2057 Processes events, returning after the first batch has been processed
2058 or the time limit has been reached.
2059
2060 Only Ctrl-C exception, no return.
2061 """
2062 try:
2063 self.oVBoxMgr.waitForEvents(cMsTimeout);
2064 except KeyboardInterrupt:
2065 raise;
2066 except:
2067 pass;
2068 return None;
2069
2070 def processPendingEvents(self):
2071 """ processEvents(0) - no waiting. """
2072 return self.processEvents(0);
2073
2074 def sleep(self, cSecs):
2075 """
2076 Sleep for a specified amount of time, processing XPCOM events all the while.
2077 """
2078 cMsTimeout = long(cSecs * 1000);
2079 msStart = base.timestampMilli();
2080 self.processEvents(0);
2081 while True:
2082 cMsElapsed = base.timestampMilli() - msStart;
2083 if cMsElapsed > cMsTimeout:
2084 break;
2085 #reporter.log2('cMsTimeout=%s - cMsElapsed=%d => %s' % (cMsTimeout, cMsElapsed, cMsTimeout - cMsElapsed));
2086 self.processEvents(cMsTimeout - cMsElapsed);
2087 return None;
2088
2089 def _logVmInfoUnsafe(self, oVM): # pylint: disable=too-many-statements,too-many-branches
2090 """
2091 Internal worker for logVmInfo that is wrapped in try/except.
2092 """
2093 reporter.log(" Name: %s" % (oVM.name,));
2094 reporter.log(" ID: %s" % (oVM.id,));
2095 oOsType = self.oVBox.getGuestOSType(oVM.OSTypeId);
2096 reporter.log(" OS Type: %s - %s" % (oVM.OSTypeId, oOsType.description,));
2097 reporter.log(" Machine state: %s" % (oVM.state,));
2098 reporter.log(" Session state: %s" % (oVM.sessionState,));
2099 if self.fpApiVer >= 4.2:
2100 reporter.log(" Session PID: %u (%#x)" % (oVM.sessionPID, oVM.sessionPID,));
2101 else:
2102 reporter.log(" Session PID: %u (%#x)" % (oVM.sessionPid, oVM.sessionPid,));
2103 if self.fpApiVer >= 5.0:
2104 reporter.log(" Session Name: %s" % (oVM.sessionName,));
2105 else:
2106 reporter.log(" Session Name: %s" % (oVM.sessionType,));
2107 reporter.log(" CPUs: %s" % (oVM.CPUCount,));
2108 reporter.log(" RAM: %sMB" % (oVM.memorySize,));
2109 if self.fpApiVer >= 6.1 and hasattr(oVM, 'graphicsAdapter'):
2110 reporter.log(" VRAM: %sMB" % (oVM.graphicsAdapter.VRAMSize,));
2111 reporter.log(" Monitors: %s" % (oVM.graphicsAdapter.monitorCount,));
2112 reporter.log(" GraphicsController: %s"
2113 % (self.oVBoxMgr.getEnumValueName('GraphicsControllerType', # pylint: disable=not-callable
2114 oVM.graphicsAdapter.graphicsControllerType),));
2115 else:
2116 reporter.log(" VRAM: %sMB" % (oVM.VRAMSize,));
2117 reporter.log(" Monitors: %s" % (oVM.monitorCount,));
2118 reporter.log(" GraphicsController: %s"
2119 % (self.oVBoxMgr.getEnumValueName('GraphicsControllerType', oVM.graphicsControllerType),)); # pylint: disable=not-callable
2120 reporter.log(" Chipset: %s" % (self.oVBoxMgr.getEnumValueName('ChipsetType', oVM.chipsetType),)); # pylint: disable=not-callable
2121 if self.fpApiVer >= 6.2 and hasattr(vboxcon, 'IommuType_None'):
2122 reporter.log(" IOMMU: %s" % (self.oVBoxMgr.getEnumValueName('IommuType', oVM.iommuType),)); # pylint: disable=not-callable
2123 reporter.log(" Firmware: %s" % (self.oVBoxMgr.getEnumValueName('FirmwareType', oVM.firmwareType),)); # pylint: disable=not-callable
2124 reporter.log(" HwVirtEx: %s" % (oVM.getHWVirtExProperty(vboxcon.HWVirtExPropertyType_Enabled),));
2125 reporter.log(" VPID support: %s" % (oVM.getHWVirtExProperty(vboxcon.HWVirtExPropertyType_VPID),));
2126 reporter.log(" Nested paging: %s" % (oVM.getHWVirtExProperty(vboxcon.HWVirtExPropertyType_NestedPaging),));
2127 atTypes = [
2128 ( 'CPUPropertyType_PAE', 'PAE: '),
2129 ( 'CPUPropertyType_LongMode', 'Long-mode: '),
2130 ( 'CPUPropertyType_HWVirt', 'Nested VT-x/AMD-V: '),
2131 ( 'CPUPropertyType_APIC', 'APIC: '),
2132 ( 'CPUPropertyType_X2APIC', 'X2APIC: '),
2133 ( 'CPUPropertyType_TripleFaultReset', 'TripleFaultReset: '),
2134 ( 'CPUPropertyType_IBPBOnVMExit', 'IBPBOnVMExit: '),
2135 ( 'CPUPropertyType_SpecCtrl', 'SpecCtrl: '),
2136 ( 'CPUPropertyType_SpecCtrlByHost', 'SpecCtrlByHost: '),
2137 ];
2138 for sEnumValue, sDesc in atTypes:
2139 if hasattr(vboxcon, sEnumValue):
2140 reporter.log(" %s%s" % (sDesc, oVM.getCPUProperty(getattr(vboxcon, sEnumValue)),));
2141 reporter.log(" ACPI: %s" % (oVM.BIOSSettings.ACPIEnabled,));
2142 reporter.log(" IO-APIC: %s" % (oVM.BIOSSettings.IOAPICEnabled,));
2143 if self.fpApiVer >= 3.2:
2144 if self.fpApiVer >= 4.2:
2145 reporter.log(" HPET: %s" % (oVM.HPETEnabled,));
2146 else:
2147 reporter.log(" HPET: %s" % (oVM.hpetEnabled,));
2148 if self.fpApiVer >= 6.1 and hasattr(oVM, 'graphicsAdapter'):
2149 reporter.log(" 3D acceleration: %s" % (oVM.graphicsAdapter.accelerate3DEnabled,));
2150 reporter.log(" 2D acceleration: %s" % (oVM.graphicsAdapter.accelerate2DVideoEnabled,));
2151 else:
2152 reporter.log(" 3D acceleration: %s" % (oVM.accelerate3DEnabled,));
2153 reporter.log(" 2D acceleration: %s" % (oVM.accelerate2DVideoEnabled,));
2154 reporter.log(" TeleporterEnabled: %s" % (oVM.teleporterEnabled,));
2155 reporter.log(" TeleporterPort: %s" % (oVM.teleporterPort,));
2156 reporter.log(" TeleporterAddress: %s" % (oVM.teleporterAddress,));
2157 reporter.log(" TeleporterPassword: %s" % (oVM.teleporterPassword,));
2158 reporter.log(" Clipboard mode: %s" % (oVM.clipboardMode,));
2159 if self.fpApiVer >= 5.0:
2160 reporter.log(" Drag and drop mode: %s" % (oVM.dnDMode,));
2161 elif self.fpApiVer >= 4.3:
2162 reporter.log(" Drag and drop mode: %s" % (oVM.dragAndDropMode,));
2163 if self.fpApiVer >= 4.0:
2164 reporter.log(" VRDP server: %s" % (oVM.VRDEServer.enabled,));
2165 try: sPorts = oVM.VRDEServer.getVRDEProperty("TCP/Ports");
2166 except: sPorts = "";
2167 reporter.log(" VRDP server ports: %s" % (sPorts,));
2168 reporter.log(" VRDP auth: %s (%s)" % (oVM.VRDEServer.authType, oVM.VRDEServer.authLibrary,));
2169 else:
2170 reporter.log(" VRDP server: %s" % (oVM.VRDPServer.enabled,));
2171 reporter.log(" VRDP server ports: %s" % (oVM.VRDPServer.ports,));
2172 reporter.log(" Last changed: %s" % (oVM.lastStateChange,));
2173
2174 aoControllers = self.oVBoxMgr.getArray(oVM, 'storageControllers')
2175 if aoControllers:
2176 reporter.log(" Controllers:");
2177 for oCtrl in aoControllers:
2178 reporter.log(" %s %s bus: %s type: %s" % (oCtrl.name, oCtrl.controllerType, oCtrl.bus, oCtrl.controllerType,));
2179 reporter.log(" AudioController: %s"
2180 % (self.oVBoxMgr.getEnumValueName('AudioControllerType', oVM.audioAdapter.audioController),)); # pylint: disable=not-callable
2181 reporter.log(" AudioEnabled: %s" % (oVM.audioAdapter.enabled,));
2182 reporter.log(" Host AudioDriver: %s"
2183 % (self.oVBoxMgr.getEnumValueName('AudioDriverType', oVM.audioAdapter.audioDriver),)); # pylint: disable=not-callable
2184
2185 self.processPendingEvents();
2186 aoAttachments = self.oVBoxMgr.getArray(oVM, 'mediumAttachments')
2187 if aoAttachments:
2188 reporter.log(" Attachments:");
2189 for oAtt in aoAttachments:
2190 sCtrl = "Controller: %s port: %s device: %s type: %s" % (oAtt.controller, oAtt.port, oAtt.device, oAtt.type);
2191 oMedium = oAtt.medium
2192 if oAtt.type == vboxcon.DeviceType_HardDisk:
2193 reporter.log(" %s: HDD" % sCtrl);
2194 reporter.log(" Id: %s" % (oMedium.id,));
2195 reporter.log(" Name: %s" % (oMedium.name,));
2196 reporter.log(" Format: %s" % (oMedium.format,));
2197 reporter.log(" Location: %s" % (oMedium.location,));
2198
2199 if oAtt.type == vboxcon.DeviceType_DVD:
2200 reporter.log(" %s: DVD" % sCtrl);
2201 if oMedium:
2202 reporter.log(" Id: %s" % (oMedium.id,));
2203 reporter.log(" Name: %s" % (oMedium.name,));
2204 if oMedium.hostDrive:
2205 reporter.log(" Host DVD %s" % (oMedium.location,));
2206 if oAtt.passthrough:
2207 reporter.log(" [passthrough mode]");
2208 else:
2209 reporter.log(" Virtual image: %s" % (oMedium.location,));
2210 reporter.log(" Size: %s" % (oMedium.size,));
2211 else:
2212 reporter.log(" empty");
2213
2214 if oAtt.type == vboxcon.DeviceType_Floppy:
2215 reporter.log(" %s: Floppy" % sCtrl);
2216 if oMedium:
2217 reporter.log(" Id: %s" % (oMedium.id,));
2218 reporter.log(" Name: %s" % (oMedium.name,));
2219 if oMedium.hostDrive:
2220 reporter.log(" Host floppy: %s" % (oMedium.location,));
2221 else:
2222 reporter.log(" Virtual image: %s" % (oMedium.location,));
2223 reporter.log(" Size: %s" % (oMedium.size,));
2224 else:
2225 reporter.log(" empty");
2226 self.processPendingEvents();
2227
2228 reporter.log(" Network Adapter:");
2229 for iSlot in range(0, 32):
2230 try: oNic = oVM.getNetworkAdapter(iSlot)
2231 except: break;
2232 if not oNic.enabled:
2233 reporter.log2(" slot #%d found but not enabled, skipping" % (iSlot,));
2234 continue;
2235 reporter.log(" slot #%d: type: %s (%s) MAC Address: %s lineSpeed: %s"
2236 % (iSlot, self.oVBoxMgr.getEnumValueName('NetworkAdapterType', oNic.adapterType), # pylint: disable=not-callable
2237 oNic.adapterType, oNic.MACAddress, oNic.lineSpeed) );
2238
2239 if oNic.attachmentType == vboxcon.NetworkAttachmentType_NAT:
2240 reporter.log(" attachmentType: NAT (%s)" % (oNic.attachmentType,));
2241 if self.fpApiVer >= 4.1:
2242 reporter.log(" nat-network: %s" % (oNic.NATNetwork,));
2243 if self.fpApiVer >= 7.0 and hasattr(oNic.NATEngine, 'localhostReachable'):
2244 reporter.log(" localhostReachable: %s" % (oNic.NATEngine.localhostReachable,));
2245
2246 elif oNic.attachmentType == vboxcon.NetworkAttachmentType_Bridged:
2247 reporter.log(" attachmentType: Bridged (%s)" % (oNic.attachmentType,));
2248 if self.fpApiVer >= 4.1:
2249 reporter.log(" hostInterface: %s" % (oNic.bridgedInterface,));
2250 else:
2251 reporter.log(" hostInterface: %s" % (oNic.hostInterface,));
2252 elif oNic.attachmentType == vboxcon.NetworkAttachmentType_Internal:
2253 reporter.log(" attachmentType: Internal (%s)" % (oNic.attachmentType,));
2254 reporter.log(" intnet-name: %s" % (oNic.internalNetwork,));
2255 elif oNic.attachmentType == vboxcon.NetworkAttachmentType_HostOnly:
2256 reporter.log(" attachmentType: HostOnly (%s)" % (oNic.attachmentType,));
2257 if self.fpApiVer >= 4.1:
2258 reporter.log(" hostInterface: %s" % (oNic.hostOnlyInterface,));
2259 else:
2260 reporter.log(" hostInterface: %s" % (oNic.hostInterface,));
2261 else:
2262 if self.fpApiVer >= 7.0:
2263 if oNic.attachmentType == vboxcon.NetworkAttachmentType_HostOnlyNetwork:
2264 reporter.log(" attachmentType: HostOnlyNetwork (%s)" % (oNic.attachmentType,));
2265 reporter.log(" hostonly-net: %s" % (oNic.hostOnlyNetwork,));
2266 elif self.fpApiVer >= 4.1:
2267 if oNic.attachmentType == vboxcon.NetworkAttachmentType_Generic:
2268 reporter.log(" attachmentType: Generic (%s)" % (oNic.attachmentType,));
2269 reporter.log(" generic-driver: %s" % (oNic.GenericDriver,));
2270 else:
2271 reporter.log(" attachmentType: unknown-%s" % (oNic.attachmentType,));
2272 else:
2273 reporter.log(" attachmentType: unknown-%s" % (oNic.attachmentType,));
2274 if oNic.traceEnabled:
2275 reporter.log(" traceFile: %s" % (oNic.traceFile,));
2276 self.processPendingEvents();
2277
2278 reporter.log(" Serial ports:");
2279 for iSlot in range(0, 8):
2280 try: oPort = oVM.getSerialPort(iSlot)
2281 except: break;
2282 if oPort is not None and oPort.enabled:
2283 enmHostMode = oPort.hostMode;
2284 reporter.log(" slot #%d: hostMode: %s (%s) I/O port: %s IRQ: %s server: %s path: %s" %
2285 (iSlot, self.oVBoxMgr.getEnumValueName('PortMode', enmHostMode), # pylint: disable=not-callable
2286 enmHostMode, oPort.IOBase, oPort.IRQ, oPort.server, oPort.path,) );
2287 self.processPendingEvents();
2288
2289 return True;
2290
2291 def logVmInfo(self, oVM): # pylint: disable=too-many-statements,too-many-branches
2292 """
2293 Logs VM configuration details.
2294
2295 This is copy, past, search, replace and edit of infoCmd from vboxshell.py.
2296 """
2297 try:
2298 fRc = self._logVmInfoUnsafe(oVM);
2299 except:
2300 reporter.logXcpt();
2301 fRc = False;
2302 return fRc;
2303
2304 def logVmInfoByName(self, sName):
2305 """
2306 logVmInfo + getVmByName.
2307 """
2308 return self.logVmInfo(self.getVmByName(sName));
2309
2310 def tryFindGuestOsId(self, sIdOrDesc):
2311 """
2312 Takes a guest OS ID or Description and returns the ID.
2313 If nothing matching it is found, the input is returned unmodified.
2314 """
2315
2316 if self.fpApiVer >= 4.0:
2317 if sIdOrDesc == 'Solaris (64 bit)':
2318 sIdOrDesc = 'Oracle Solaris 10 5/09 and earlier (64 bit)';
2319
2320 try:
2321 aoGuestTypes = self.oVBoxMgr.getArray(self.oVBox, 'GuestOSTypes');
2322 except:
2323 reporter.logXcpt();
2324 else:
2325 for oGuestOS in aoGuestTypes:
2326 try:
2327 sId = oGuestOS.id;
2328 sDesc = oGuestOS.description;
2329 except:
2330 reporter.logXcpt();
2331 else:
2332 if sIdOrDesc in (sId, sDesc,):
2333 sIdOrDesc = sId;
2334 break;
2335 self.processPendingEvents();
2336 return sIdOrDesc
2337
2338 def resourceFindVmHd(self, sVmName, sFlavor):
2339 """
2340 Search the test resources for the most recent VM HD.
2341
2342 Returns path relative to the test resource root.
2343 """
2344 ## @todo implement a proper search algo here.
2345 return '4.2/' + sFlavor + '/' + sVmName + '/t-' + sVmName + '.vdi';
2346
2347
2348 #
2349 # VM Api wrappers that logs errors, hides exceptions and other details.
2350 #
2351
2352 def createTestVMOnly(self, sName, sKind):
2353 """
2354 Creates and register a test VM without doing any kind of configuration.
2355
2356 Returns VM object (IMachine) on success, None on failure.
2357 """
2358 if not self.importVBoxApi():
2359 return None;
2360
2361 # create + register the VM
2362 try:
2363 if self.fpApiVer >= 7.0: # Introduces VM encryption (three new parameters, empty for now).
2364 oVM = self.oVBox.createMachine("", sName, [], self.tryFindGuestOsId(sKind), "", "", "", "");
2365 elif self.fpApiVer >= 4.2: # Introduces grouping (third parameter, empty for now).
2366 oVM = self.oVBox.createMachine("", sName, [], self.tryFindGuestOsId(sKind), "");
2367 elif self.fpApiVer >= 4.0:
2368 oVM = self.oVBox.createMachine("", sName, self.tryFindGuestOsId(sKind), "", False);
2369 elif self.fpApiVer >= 3.2:
2370 oVM = self.oVBox.createMachine(sName, self.tryFindGuestOsId(sKind), "", "", False);
2371 else:
2372 oVM = self.oVBox.createMachine(sName, self.tryFindGuestOsId(sKind), "", "");
2373 try:
2374 oVM.saveSettings();
2375 try:
2376 self.oVBox.registerMachine(oVM);
2377 return oVM;
2378 except:
2379 reporter.logXcpt();
2380 raise;
2381 except:
2382 reporter.logXcpt();
2383 if self.fpApiVer >= 4.0:
2384 try:
2385 if self.fpApiVer >= 4.3:
2386 oProgress = oVM.deleteConfig([]);
2387 else:
2388 oProgress = oVM.delete(None);
2389 self.waitOnProgress(oProgress);
2390 except:
2391 reporter.logXcpt();
2392 else:
2393 try: oVM.deleteSettings();
2394 except: reporter.logXcpt();
2395 raise;
2396 except:
2397 reporter.errorXcpt('failed to create vm "%s"' % (sName));
2398 return None;
2399
2400 # pylint: disable=too-many-arguments,too-many-locals,too-many-statements
2401 def createTestVM(self,
2402 sName,
2403 iGroup,
2404 sHd = None,
2405 cMbRam = None,
2406 cCpus = 1,
2407 fVirtEx = None,
2408 fNestedPaging = None,
2409 sDvdImage = None,
2410 sKind = "Other",
2411 fIoApic = None,
2412 fNstHwVirt = None,
2413 fPae = None,
2414 fFastBootLogo = True,
2415 eNic0Type = None,
2416 eNic0AttachType = None,
2417 sNic0NetName = 'default',
2418 sNic0MacAddr = 'grouped',
2419 sFloppy = None,
2420 fNatForwardingForTxs = None,
2421 sHddControllerType = 'IDE Controller',
2422 fVmmDevTestingPart = None,
2423 fVmmDevTestingMmio = False,
2424 sFirmwareType = 'bios',
2425 sChipsetType = 'piix3',
2426 sIommuType = 'none',
2427 sDvdControllerType = 'IDE Controller',
2428 sCom1RawFile = None):
2429 """
2430 Creates a test VM with a immutable HD from the test resources.
2431 """
2432 # create + register the VM
2433 oVM = self.createTestVMOnly(sName, sKind);
2434 if not oVM:
2435 return None;
2436
2437 # Configure the VM.
2438 fRc = True;
2439 oSession = self.openSession(oVM);
2440 if oSession is not None:
2441 fRc = oSession.setupPreferredConfig();
2442
2443 if fRc and cMbRam is not None :
2444 fRc = oSession.setRamSize(cMbRam);
2445 if fRc and cCpus is not None:
2446 fRc = oSession.setCpuCount(cCpus);
2447 if fRc and fVirtEx is not None:
2448 fRc = oSession.enableVirtEx(fVirtEx);
2449 if fRc and fNestedPaging is not None:
2450 fRc = oSession.enableNestedPaging(fNestedPaging);
2451 if fRc and fIoApic is not None:
2452 fRc = oSession.enableIoApic(fIoApic);
2453 if fRc and fNstHwVirt is not None:
2454 fRc = oSession.enableNestedHwVirt(fNstHwVirt);
2455 if fRc and fPae is not None:
2456 fRc = oSession.enablePae(fPae);
2457 if fRc and sDvdImage is not None:
2458 fRc = oSession.attachDvd(sDvdImage, sDvdControllerType);
2459 if fRc and sHd is not None:
2460 fRc = oSession.attachHd(sHd, sHddControllerType);
2461 if fRc and sFloppy is not None:
2462 fRc = oSession.attachFloppy(sFloppy);
2463 if fRc and eNic0Type is not None:
2464 fRc = oSession.setNicType(eNic0Type, 0);
2465 if fRc and (eNic0AttachType is not None or (sNic0NetName is not None and sNic0NetName != 'default')):
2466 fRc = oSession.setNicAttachment(eNic0AttachType, sNic0NetName, 0);
2467 if fRc and sNic0MacAddr is not None:
2468 if sNic0MacAddr == 'grouped':
2469 sNic0MacAddr = '%02X' % (iGroup);
2470 fRc = oSession.setNicMacAddress(sNic0MacAddr, 0);
2471 # Needed to reach the host (localhost) from the guest. See xTracker #9896.
2472 if fRc and self.fpApiVer >= 7.0:
2473 fRc = oSession.setNicLocalhostReachable(True, 0);
2474 if fRc and fNatForwardingForTxs is True:
2475 fRc = oSession.setupNatForwardingForTxs();
2476 if fRc and fFastBootLogo is not None:
2477 fRc = oSession.setupBootLogo(fFastBootLogo);
2478 if fRc and self.fEnableVrdp:
2479 fRc = oSession.setupVrdp(True, self.uVrdpBasePort + iGroup);
2480 if fRc and fVmmDevTestingPart is not None:
2481 fRc = oSession.enableVmmDevTestingPart(fVmmDevTestingPart, fVmmDevTestingMmio);
2482 if fRc and sFirmwareType == 'bios':
2483 fRc = oSession.setFirmwareType(vboxcon.FirmwareType_BIOS);
2484 elif fRc and sFirmwareType == 'efi':
2485 fRc = oSession.setFirmwareType(vboxcon.FirmwareType_EFI);
2486 if fRc and self.fEnableDebugger:
2487 fRc = oSession.setExtraData('VBoxInternal/DBGC/Enabled', '1');
2488 if fRc and sChipsetType == 'piix3':
2489 fRc = oSession.setChipsetType(vboxcon.ChipsetType_PIIX3);
2490 elif fRc and sChipsetType == 'ich9':
2491 fRc = oSession.setChipsetType(vboxcon.ChipsetType_ICH9);
2492 if fRc and sCom1RawFile:
2493 fRc = oSession.setupSerialToRawFile(0, sCom1RawFile);
2494 if fRc and self.fpApiVer >= 6.2 and hasattr(vboxcon, 'IommuType_AMD') and sIommuType == 'amd':
2495 fRc = oSession.setIommuType(vboxcon.IommuType_AMD);
2496 elif fRc and self.fpApiVer >= 6.2 and hasattr(vboxcon, 'IommuType_Intel') and sIommuType == 'intel':
2497 fRc = oSession.setIommuType(vboxcon.IommuType_Intel);
2498
2499 if fRc: fRc = oSession.saveSettings();
2500 if not fRc: oSession.discardSettings(True);
2501 oSession.close();
2502 if not fRc:
2503 if self.fpApiVer >= 4.0:
2504 try: oVM.unregister(vboxcon.CleanupMode_Full);
2505 except: reporter.logXcpt();
2506 try:
2507 if self.fpApiVer >= 4.3:
2508 oProgress = oVM.deleteConfig([]);
2509 else:
2510 oProgress = oVM.delete([]);
2511 self.waitOnProgress(oProgress);
2512 except:
2513 reporter.logXcpt();
2514 else:
2515 try: self.oVBox.unregisterMachine(oVM.id);
2516 except: reporter.logXcpt();
2517 try: oVM.deleteSettings();
2518 except: reporter.logXcpt();
2519 return None;
2520
2521 # success.
2522 reporter.log('created "%s" with name "%s"' % (oVM.id, sName));
2523 self.aoVMs.append(oVM);
2524 self.logVmInfo(oVM); # testing...
2525 return oVM;
2526 # pylint: enable=too-many-arguments,too-many-locals,too-many-statements
2527
2528 def createTestVmWithDefaults(self, # pylint: disable=too-many-arguments
2529 sName,
2530 iGroup,
2531 sKind,
2532 sDvdImage = None,
2533 fFastBootLogo = True,
2534 eNic0AttachType = None,
2535 sNic0NetName = 'default',
2536 sNic0MacAddr = 'grouped',
2537 fVmmDevTestingPart = None,
2538 fVmmDevTestingMmio = False,
2539 sCom1RawFile = None):
2540 """
2541 Creates a test VM with all defaults and no HDs.
2542 """
2543 # create + register the VM
2544 oVM = self.createTestVMOnly(sName, sKind);
2545 if oVM is not None:
2546 # Configure the VM with defaults according to sKind.
2547 fRc = True;
2548 oSession = self.openSession(oVM);
2549 if oSession is not None:
2550 if self.fpApiVer >= 6.0:
2551 try:
2552 oSession.o.machine.applyDefaults('');
2553 except:
2554 reporter.errorXcpt('failed to apply defaults to vm "%s"' % (sName,));
2555 fRc = False;
2556 else:
2557 reporter.error("Implement applyDefaults for vbox version %s" % (self.fpApiVer,));
2558 #fRc = oSession.setupPreferredConfig();
2559 fRc = False;
2560
2561 # Apply the specified configuration:
2562 if fRc and sDvdImage is not None:
2563 #fRc = oSession.insertDvd(sDvdImage); # attachDvd
2564 reporter.error('Implement: oSession.insertDvd(%s)' % (sDvdImage,));
2565 fRc = False;
2566
2567 if fRc and fFastBootLogo is not None:
2568 fRc = oSession.setupBootLogo(fFastBootLogo);
2569
2570 if fRc and (eNic0AttachType is not None or (sNic0NetName is not None and sNic0NetName != 'default')):
2571 fRc = oSession.setNicAttachment(eNic0AttachType, sNic0NetName, 0);
2572 if fRc and sNic0MacAddr is not None:
2573 if sNic0MacAddr == 'grouped':
2574 sNic0MacAddr = '%02X' % (iGroup,);
2575 fRc = oSession.setNicMacAddress(sNic0MacAddr, 0);
2576 # Needed to reach the host (localhost) from the guest. See xTracker #9896.
2577 if fRc and self.fpApiVer >= 7.0:
2578 fRc = oSession.setNicLocalhostReachable(True, 0);
2579
2580 if fRc and self.fEnableVrdp:
2581 fRc = oSession.setupVrdp(True, self.uVrdpBasePort + iGroup);
2582
2583 if fRc and fVmmDevTestingPart is not None:
2584 fRc = oSession.enableVmmDevTestingPart(fVmmDevTestingPart, fVmmDevTestingMmio);
2585
2586 if fRc and sCom1RawFile:
2587 fRc = oSession.setupSerialToRawFile(0, sCom1RawFile);
2588
2589 # Save the settings if we were successfull, otherwise discard them.
2590 if fRc:
2591 fRc = oSession.saveSettings();
2592 if not fRc:
2593 oSession.discardSettings(True);
2594 oSession.close();
2595
2596 if fRc is True:
2597 # If we've been successful, add the VM to the list and return it.
2598 # success.
2599 reporter.log('created "%s" with name "%s"' % (oVM.id, sName, ));
2600 self.aoVMs.append(oVM);
2601 self.logVmInfo(oVM); # testing...
2602 return oVM;
2603
2604 # Failed. Unregister the machine and delete it.
2605 if self.fpApiVer >= 4.0:
2606 try: oVM.unregister(vboxcon.CleanupMode_Full);
2607 except: reporter.logXcpt();
2608 try:
2609 if self.fpApiVer >= 4.3:
2610 oProgress = oVM.deleteConfig([]);
2611 else:
2612 oProgress = oVM.delete([]);
2613 self.waitOnProgress(oProgress);
2614 except:
2615 reporter.logXcpt();
2616 else:
2617 try: self.oVBox.unregisterMachine(oVM.id);
2618 except: reporter.logXcpt();
2619 try: oVM.deleteSettings();
2620 except: reporter.logXcpt();
2621 return None;
2622
2623 def addTestMachine(self, sNameOrId, fQuiet = False):
2624 """
2625 Adds an already existing (that is, configured) test VM to the
2626 test VM list.
2627
2628 Returns the VM object on success, None if failed.
2629 """
2630 # find + add the VM to the list.
2631 oVM = None;
2632 try:
2633 if self.fpApiVer >= 4.0:
2634 oVM = self.oVBox.findMachine(sNameOrId);
2635 else:
2636 reporter.error('fpApiVer=%s - did you remember to initialize the API' % (self.fpApiVer,));
2637 except:
2638 reporter.errorXcpt('could not find vm "%s"' % (sNameOrId,));
2639
2640 if oVM:
2641 self.aoVMs.append(oVM);
2642 if not fQuiet:
2643 reporter.log('Added "%s" with name "%s"' % (oVM.id, sNameOrId));
2644 self.logVmInfo(oVM);
2645 return oVM;
2646
2647 def forgetTestMachine(self, oVM, fQuiet = False):
2648 """
2649 Forget about an already known test VM in the test VM list.
2650
2651 Returns True on success, False if failed.
2652 """
2653 try:
2654 sUuid = oVM.id;
2655 sName = oVM.name;
2656 except:
2657 reporter.errorXcpt('failed to get the UUID for VM "%s"' % (oVM,));
2658 return False;
2659 try:
2660 self.aoVMs.remove(oVM);
2661 if not fQuiet:
2662 reporter.log('Removed "%s" with name "%s"' % (sUuid, sName));
2663 except:
2664 reporter.errorXcpt('could not find vm "%s"' % (sName,));
2665 return False;
2666 return True;
2667
2668 def openSession(self, oVM):
2669 """
2670 Opens a session for the VM. Returns the a Session wrapper object that
2671 will automatically close the session when the wrapper goes out of scope.
2672
2673 On failure None is returned and an error is logged.
2674 """
2675 try:
2676 sUuid = oVM.id;
2677 except:
2678 reporter.errorXcpt('failed to get the UUID for VM "%s"' % (oVM,));
2679 return None;
2680
2681 # This loop is a kludge to deal with us racing the closing of the
2682 # direct session of a previous VM run. See waitOnDirectSessionClose.
2683 for i in range(10):
2684 try:
2685 if self.fpApiVer <= 3.2:
2686 oSession = self.oVBoxMgr.openMachineSession(sUuid);
2687 else:
2688 oSession = self.oVBoxMgr.openMachineSession(oVM);
2689 break;
2690 except:
2691 if i == 9:
2692 reporter.errorXcpt('failed to open session for "%s" ("%s")' % (sUuid, oVM));
2693 return None;
2694 if i > 0:
2695 reporter.logXcpt('warning: failed to open session for "%s" ("%s") - retrying in %u secs' % (sUuid, oVM, i));
2696 self.waitOnDirectSessionClose(oVM, 5000 + i * 1000);
2697 from testdriver.vboxwrappers import SessionWrapper;
2698 return SessionWrapper(oSession, oVM, self.oVBox, self.oVBoxMgr, self, False);
2699
2700 #
2701 # Guest locations.
2702 #
2703
2704 @staticmethod
2705 def getGuestTempDir(oTestVm):
2706 """
2707 Helper for finding a temporary directory in the test VM.
2708
2709 Note! It may be necessary to create it!
2710 """
2711 if oTestVm.isWindows():
2712 return "C:\\Temp";
2713 if oTestVm.isOS2():
2714 return "C:\\Temp";
2715 return '/var/tmp';
2716
2717 @staticmethod
2718 def getGuestSystemDir(oTestVm, sPathPrefix = ''):
2719 """
2720 Helper for finding a system directory in the test VM that we can play around with.
2721 sPathPrefix can be used to specify other directories, such as /usr/local/bin/ or /usr/bin, for instance.
2722
2723 On Windows this is always the System32 directory, so this function can be used as
2724 basis for locating other files in or under that directory.
2725 """
2726 if oTestVm.isWindows():
2727 return oTestVm.pathJoin(TestDriver.getGuestWinDir(oTestVm), 'System32');
2728 if oTestVm.isOS2():
2729 return 'C:\\OS2\\DLL';
2730
2731 # OL / RHEL symlinks "/bin"/ to "/usr/bin". To avoid (unexpectedly) following symlinks, use "/usr/bin" then instead.
2732 if not sPathPrefix \
2733 and oTestVm.sKind in ('Oracle_64', 'Oracle'): ## @todo Does this apply for "RedHat" as well?
2734 return "/usr/bin";
2735
2736 return sPathPrefix + "/bin";
2737
2738 @staticmethod
2739 def getGuestSystemAdminDir(oTestVm, sPathPrefix = ''):
2740 """
2741 Helper for finding a system admin directory ("sbin") in the test VM that we can play around with.
2742 sPathPrefix can be used to specify other directories, such as /usr/local/sbin/ or /usr/sbin, for instance.
2743
2744 On Windows this is always the System32 directory, so this function can be used as
2745 basis for locating other files in or under that directory.
2746 On UNIX-y systems this always is the "sh" shell to guarantee a common shell syntax.
2747 """
2748 if oTestVm.isWindows():
2749 return oTestVm.pathJoin(TestDriver.getGuestWinDir(oTestVm), 'System32');
2750 if oTestVm.isOS2():
2751 return 'C:\\OS2\\DLL'; ## @todo r=andy Not sure here.
2752
2753 # OL / RHEL symlinks "/sbin"/ to "/usr/sbin". To avoid (unexpectedly) following symlinks, use "/usr/sbin" then instead.
2754 if not sPathPrefix \
2755 and oTestVm.sKind in ('Oracle_64', 'Oracle'): ## @todo Does this apply for "RedHat" as well?
2756 return "/usr/sbin";
2757
2758 return sPathPrefix + "/sbin";
2759
2760 @staticmethod
2761 def getGuestWinDir(oTestVm):
2762 """
2763 Helper for finding the Windows directory in the test VM that we can play around with.
2764 ASSUMES that we always install Windows on drive C.
2765
2766 Returns the Windows directory, or an empty string when executed on a non-Windows guest (asserts).
2767 """
2768 sWinDir = '';
2769 if oTestVm.isWindows():
2770 if oTestVm.sKind in ['WindowsNT4', 'WindowsNT3x',]:
2771 sWinDir = 'C:\\WinNT\\';
2772 else:
2773 sWinDir = 'C:\\Windows\\';
2774 assert sWinDir != '', 'Retrieving Windows directory for non-Windows OS';
2775 return sWinDir;
2776
2777 @staticmethod
2778 def getGuestSystemShell(oTestVm):
2779 """
2780 Helper for finding the default system shell in the test VM.
2781 """
2782 if oTestVm.isWindows():
2783 return TestDriver.getGuestSystemDir(oTestVm) + '\\cmd.exe';
2784 if oTestVm.isOS2():
2785 return TestDriver.getGuestSystemDir(oTestVm) + '\\..\\CMD.EXE';
2786 return "/bin/sh";
2787
2788 @staticmethod
2789 def getGuestSystemFileForReading(oTestVm):
2790 """
2791 Helper for finding a file in the test VM that we can read.
2792 """
2793 if oTestVm.isWindows():
2794 return TestDriver.getGuestSystemDir(oTestVm) + '\\ntdll.dll';
2795 if oTestVm.isOS2():
2796 return TestDriver.getGuestSystemDir(oTestVm) + '\\DOSCALL1.DLL';
2797 return "/bin/sh";
2798
2799 def getVmByName(self, sName):
2800 """
2801 Get a test VM by name. Returns None if not found, logged.
2802 """
2803 # Look it up in our 'cache'.
2804 for oVM in self.aoVMs:
2805 try:
2806 #reporter.log2('cur: %s / %s (oVM=%s)' % (oVM.name, oVM.id, oVM));
2807 if oVM.name == sName:
2808 return oVM;
2809 except:
2810 reporter.errorXcpt('failed to get the name from the VM "%s"' % (oVM));
2811
2812 # Look it up the standard way.
2813 return self.addTestMachine(sName, fQuiet = True);
2814
2815 def getVmByUuid(self, sUuid):
2816 """
2817 Get a test VM by uuid. Returns None if not found, logged.
2818 """
2819 # Look it up in our 'cache'.
2820 for oVM in self.aoVMs:
2821 try:
2822 if oVM.id == sUuid:
2823 return oVM;
2824 except:
2825 reporter.errorXcpt('failed to get the UUID from the VM "%s"' % (oVM));
2826
2827 # Look it up the standard way.
2828 return self.addTestMachine(sUuid, fQuiet = True);
2829
2830 def waitOnProgress(self, oProgress, cMsTimeout = 1000000, fErrorOnTimeout = True, cMsInterval = 1000):
2831 """
2832 Waits for a progress object to complete. Returns the status code.
2833 """
2834 # Wait for progress no longer than cMsTimeout time period.
2835 tsStart = datetime.datetime.now()
2836 while True:
2837 self.processPendingEvents();
2838 try:
2839 if oProgress.completed:
2840 break;
2841 except:
2842 return -1;
2843 self.processPendingEvents();
2844
2845 tsNow = datetime.datetime.now()
2846 tsDelta = tsNow - tsStart
2847 if ((tsDelta.microseconds + tsDelta.seconds * 1000000) // 1000) > cMsTimeout:
2848 if fErrorOnTimeout:
2849 reporter.errorTimeout('Timeout while waiting for progress.')
2850 return -1
2851
2852 reporter.doPollWork('vbox.TestDriver.waitOnProgress');
2853 try: oProgress.waitForCompletion(cMsInterval);
2854 except: return -2;
2855
2856 try: rc = oProgress.resultCode;
2857 except: rc = -2;
2858 self.processPendingEvents();
2859 return rc;
2860
2861 def waitOnDirectSessionClose(self, oVM, cMsTimeout):
2862 """
2863 Waits for the VM process to close it's current direct session.
2864
2865 Returns None.
2866 """
2867 # Get the original values so we're not subject to
2868 try:
2869 eCurState = oVM.sessionState;
2870 if self.fpApiVer >= 5.0:
2871 sCurName = sOrgName = oVM.sessionName;
2872 else:
2873 sCurName = sOrgName = oVM.sessionType;
2874 if self.fpApiVer >= 4.2:
2875 iCurPid = iOrgPid = oVM.sessionPID;
2876 else:
2877 iCurPid = iOrgPid = oVM.sessionPid;
2878 except Exception as oXcpt:
2879 if ComError.notEqual(oXcpt, ComError.E_ACCESSDENIED):
2880 reporter.logXcpt();
2881 self.processPendingEvents();
2882 return None;
2883 self.processPendingEvents();
2884
2885 msStart = base.timestampMilli();
2886 while iCurPid == iOrgPid \
2887 and sCurName == sOrgName \
2888 and sCurName != '' \
2889 and base.timestampMilli() - msStart < cMsTimeout \
2890 and eCurState in (vboxcon.SessionState_Unlocking, vboxcon.SessionState_Spawning, vboxcon.SessionState_Locked,):
2891 self.processEvents(1000);
2892 try:
2893 eCurState = oVM.sessionState;
2894 sCurName = oVM.sessionName if self.fpApiVer >= 5.0 else oVM.sessionType;
2895 iCurPid = oVM.sessionPID if self.fpApiVer >= 4.2 else oVM.sessionPid;
2896 except Exception as oXcpt:
2897 if ComError.notEqual(oXcpt, ComError.E_ACCESSDENIED):
2898 reporter.logXcpt();
2899 break;
2900 self.processPendingEvents();
2901 self.processPendingEvents();
2902 return None;
2903
2904 def uploadStartupLogFile(self, oVM, sVmName):
2905 """
2906 Uploads the VBoxStartup.log when present.
2907 """
2908 fRc = True;
2909 try:
2910 sLogFile = os.path.join(oVM.logFolder, 'VBoxHardening.log');
2911 except:
2912 reporter.logXcpt();
2913 fRc = False;
2914 else:
2915 if os.path.isfile(sLogFile):
2916 reporter.addLogFile(sLogFile, 'log/release/vm', '%s hardening log' % (sVmName, ),
2917 sAltName = '%s-%s' % (sVmName, os.path.basename(sLogFile),));
2918 return fRc;
2919
2920 def annotateAndUploadProcessReport(self, sProcessReport, sFilename, sKind, sDesc):
2921 """
2922 Annotates the given VM process report and uploads it if successfull.
2923 """
2924 fRc = False;
2925 if self.oBuild is not None and self.oBuild.sInstallPath is not None:
2926 oResolver = btresolver.BacktraceResolver(self.sScratchPath, self.oBuild.sInstallPath,
2927 self.getBuildOs(), self.getBuildArch(),
2928 fnLog = reporter.log);
2929 fRcTmp = oResolver.prepareEnv();
2930 if fRcTmp:
2931 reporter.log('Successfully prepared environment');
2932 sReportDbgSym = oResolver.annotateReport(sProcessReport);
2933 if sReportDbgSym and len(sReportDbgSym) > 8:
2934 reporter.addLogString(sReportDbgSym, sFilename, sKind, sDesc);
2935 fRc = True;
2936 else:
2937 reporter.log('Annotating report failed');
2938 oResolver.cleanupEnv();
2939 return fRc;
2940
2941 def startVmEx(self, oVM, fWait = True, sType = None, sName = None, asEnv = None): # pylint: disable=too-many-locals,too-many-statements
2942 """
2943 Start the VM, returning the VM session and progress object on success.
2944 The session is also added to the task list and to the aoRemoteSessions set.
2945
2946 asEnv is a list of string on the putenv() form.
2947
2948 On failure (None, None) is returned and an error is logged.
2949 """
2950 # Massage and check the input.
2951 if sType is None:
2952 sType = self.sSessionType;
2953 if sName is None:
2954 try: sName = oVM.name;
2955 except: sName = 'bad-vm-handle';
2956 reporter.log('startVmEx: sName=%s fWait=%s sType=%s' % (sName, fWait, sType));
2957 if oVM is None:
2958 return (None, None);
2959
2960 ## @todo Do this elsewhere.
2961 # Hack alert. Disables all annoying GUI popups.
2962 if sType == 'gui' and not self.aoRemoteSessions:
2963 try:
2964 self.oVBox.setExtraData('GUI/Input/AutoCapture', 'false');
2965 if self.fpApiVer >= 3.2:
2966 self.oVBox.setExtraData('GUI/LicenseAgreed', '8');
2967 else:
2968 self.oVBox.setExtraData('GUI/LicenseAgreed', '7');
2969 self.oVBox.setExtraData('GUI/RegistrationData', 'triesLeft=0');
2970 self.oVBox.setExtraData('GUI/SUNOnlineData', 'triesLeft=0');
2971 self.oVBox.setExtraData('GUI/SuppressMessages', 'confirmVMReset,remindAboutMouseIntegrationOn,'
2972 'remindAboutMouseIntegrationOff,remindAboutPausedVMInput,confirmInputCapture,'
2973 'confirmGoingFullscreen,remindAboutInaccessibleMedia,remindAboutWrongColorDepth,'
2974 'confirmRemoveMedium,allPopupPanes,allMessageBoxes,all');
2975 self.oVBox.setExtraData('GUI/UpdateDate', 'never');
2976 self.oVBox.setExtraData('GUI/PreventBetaWarning', self.oVBox.version);
2977 except:
2978 reporter.logXcpt();
2979
2980 # The UUID for the name.
2981 try:
2982 sUuid = oVM.id;
2983 except:
2984 reporter.errorXcpt('failed to get the UUID for VM "%s"' % (oVM));
2985 return (None, None);
2986 self.processPendingEvents();
2987
2988 # Construct the environment.
2989 sLogFile = '%s/VM-%s.log' % (self.sScratchPath, sUuid);
2990 try: os.remove(sLogFile);
2991 except: pass;
2992 if self.sLogSessionDest:
2993 sLogDest = self.sLogSessionDest;
2994 else:
2995 sLogDest = 'file=%s' % (sLogFile,);
2996 asEnvFinal = [
2997 'VBOX_LOG=%s' % (self.sLogSessionGroups,),
2998 'VBOX_LOG_FLAGS=%s' % (self.sLogSessionFlags,),
2999 'VBOX_LOG_DEST=nodeny %s' % (sLogDest,),
3000 'VBOX_RELEASE_LOG_FLAGS=append time',
3001 ];
3002 if sType == 'gui':
3003 asEnvFinal.append('VBOX_GUI_DBG_ENABLED=1');
3004 if asEnv is not None and asEnv:
3005 asEnvFinal += asEnv;
3006
3007 # Shortcuts for local testing.
3008 oProgress = oWrapped = None;
3009 oTestVM = self.oTestVmSet.findTestVmByName(sName) if self.oTestVmSet is not None else None;
3010 try:
3011 if oTestVM is not None \
3012 and oTestVM.fSnapshotRestoreCurrent is True:
3013 if oVM.state is vboxcon.MachineState_Running:
3014 reporter.log2('Machine "%s" already running.' % (sName,));
3015 oProgress = None;
3016 oWrapped = self.openSession(oVM);
3017 else:
3018 reporter.log2('Checking if snapshot for machine "%s" exists.' % (sName,));
3019 oSessionWrapperRestore = self.openSession(oVM);
3020 if oSessionWrapperRestore is not None:
3021 oSnapshotCur = oVM.currentSnapshot;
3022 if oSnapshotCur is not None:
3023 reporter.log2('Restoring snapshot for machine "%s".' % (sName,));
3024 oSessionWrapperRestore.restoreSnapshot(oSnapshotCur);
3025 reporter.log2('Current snapshot for machine "%s" restored.' % (sName,));
3026 else:
3027 reporter.log('warning: no current snapshot for machine "%s" found.' % (sName,));
3028 oSessionWrapperRestore.close();
3029 except:
3030 reporter.errorXcpt();
3031 return (None, None);
3032
3033 oSession = None; # Must be initialized, otherwise the log statement at the end of the function can fail.
3034
3035 # Open a remote session, wait for this operation to complete.
3036 # (The loop is a kludge to deal with us racing the closing of the
3037 # direct session of a previous VM run. See waitOnDirectSessionClose.)
3038 if oWrapped is None:
3039 for i in range(10):
3040 try:
3041 if self.fpApiVer < 4.3 \
3042 or (self.fpApiVer == 4.3 and not hasattr(self.oVBoxMgr, 'getSessionObject')):
3043 oSession = self.oVBoxMgr.mgr.getSessionObject(self.oVBox); # pylint: disable=no-member
3044 elif self.fpApiVer < 5.2 \
3045 or (self.fpApiVer == 5.2 and hasattr(self.oVBoxMgr, 'vbox')):
3046 oSession = self.oVBoxMgr.getSessionObject(self.oVBox); # pylint: disable=no-member
3047 else:
3048 oSession = self.oVBoxMgr.getSessionObject(); # pylint: disable=no-member,no-value-for-parameter
3049 if self.fpApiVer < 3.3:
3050 oProgress = self.oVBox.openRemoteSession(oSession, sUuid, sType, '\n'.join(asEnvFinal));
3051 else:
3052 if self.uApiRevision >= self.makeApiRevision(6, 1, 0, 1):
3053 oProgress = oVM.launchVMProcess(oSession, sType, asEnvFinal);
3054 else:
3055 oProgress = oVM.launchVMProcess(oSession, sType, '\n'.join(asEnvFinal));
3056 break;
3057 except:
3058 if i == 9:
3059 reporter.errorXcpt('failed to start VM "%s" ("%s"), aborting.' % (sUuid, sName));
3060 return (None, None);
3061 oSession = None;
3062 if i >= 0:
3063 reporter.logXcpt('warning: failed to start VM "%s" ("%s") - retrying in %u secs.' % (sUuid, oVM, i)); # pylint: disable=line-too-long
3064 self.waitOnDirectSessionClose(oVM, 5000 + i * 1000);
3065 if fWait and oProgress is not None:
3066 rc = self.waitOnProgress(oProgress);
3067 if rc < 0:
3068 self.waitOnDirectSessionClose(oVM, 5000);
3069
3070 # VM failed to power up, still collect VBox.log, need to wrap the session object
3071 # in order to use the helper for adding the log files to the report.
3072 from testdriver.vboxwrappers import SessionWrapper;
3073 oTmp = SessionWrapper(oSession, oVM, self.oVBox, self.oVBoxMgr, self, True, sName, sLogFile);
3074 oTmp.addLogsToReport();
3075
3076 # Try to collect a stack trace of the process for further investigation of any startup hangs.
3077 uPid = oTmp.getPid();
3078 if uPid is not None:
3079 sHostProcessInfoHung = utils.processGetInfo(uPid, fSudo = True);
3080 if sHostProcessInfoHung is not None:
3081 reporter.log('Trying to annotate the hung VM startup process report, please stand by...');
3082 fRcTmp = self.annotateAndUploadProcessReport(sHostProcessInfoHung, 'vmprocess-startup-hung.log',
3083 'process/report/vm', 'Annotated hung VM process state during startup'); # pylint: disable=line-too-long
3084 # Upload the raw log for manual annotation in case resolving failed.
3085 if not fRcTmp:
3086 reporter.log('Failed to annotate hung VM process report, uploading raw report');
3087 reporter.addLogString(sHostProcessInfoHung, 'vmprocess-startup-hung.log', 'process/report/vm',
3088 'Hung VM process state during startup');
3089
3090 try:
3091 if oSession is not None:
3092 oSession.close();
3093 except: pass;
3094 reportError(oProgress, 'failed to open session for "%s"' % (sName));
3095 self.uploadStartupLogFile(oVM, sName);
3096 return (None, None);
3097 reporter.log2('waitOnProgress -> %s' % (rc,));
3098
3099 # Wrap up the session object and push on to the list before returning it.
3100 if oWrapped is None:
3101 from testdriver.vboxwrappers import SessionWrapper;
3102 oWrapped = SessionWrapper(oSession, oVM, self.oVBox, self.oVBoxMgr, self, True, sName, sLogFile);
3103
3104 oWrapped.registerEventHandlerForTask();
3105 self.aoRemoteSessions.append(oWrapped);
3106 if oWrapped is not self.aoRemoteSessions[len(self.aoRemoteSessions) - 1]:
3107 reporter.error('not by reference: oWrapped=%s aoRemoteSessions[%s]=%s'
3108 % (oWrapped, len(self.aoRemoteSessions) - 1,
3109 self.aoRemoteSessions[len(self.aoRemoteSessions) - 1]));
3110 self.addTask(oWrapped);
3111
3112 reporter.log2('startVmEx: oSession=%s, oSessionWrapper=%s, oProgress=%s' % (oSession, oWrapped, oProgress));
3113
3114 from testdriver.vboxwrappers import ProgressWrapper;
3115 return (oWrapped, ProgressWrapper(oProgress, self.oVBoxMgr, self,
3116 'starting %s' % (sName,)) if oProgress else None);
3117
3118 def startVm(self, oVM, sType=None, sName = None, asEnv = None):
3119 """ Simplified version of startVmEx. """
3120 oSession, _ = self.startVmEx(oVM, True, sType, sName, asEnv = asEnv);
3121 return oSession;
3122
3123 def startVmByNameEx(self, sName, fWait=True, sType=None, asEnv = None):
3124 """
3125 Start the VM, returning the VM session and progress object on success.
3126 The session is also added to the task list and to the aoRemoteSessions set.
3127
3128 On failure (None, None) is returned and an error is logged.
3129 """
3130 oVM = self.getVmByName(sName);
3131 if oVM is None:
3132 return (None, None);
3133 return self.startVmEx(oVM, fWait, sType, sName, asEnv = asEnv);
3134
3135 def startVmByName(self, sName, sType=None, asEnv = None):
3136 """
3137 Start the VM, returning the VM session on success. The session is
3138 also added to the task list and to the aoRemoteSessions set.
3139
3140 On failure None is returned and an error is logged.
3141 """
3142 oSession, _ = self.startVmByNameEx(sName, True, sType, asEnv = asEnv);
3143 return oSession;
3144
3145 def terminateVmBySession(self, oSession, oProgress = None, fTakeScreenshot = None): # pylint: disable=too-many-statements
3146 """
3147 Terminates the VM specified by oSession and adds the release logs to
3148 the test report.
3149
3150 This will try achieve this by using powerOff, but will resort to
3151 tougher methods if that fails.
3152
3153 The session will always be removed from the task list.
3154 The session will be closed unless we fail to kill the process.
3155 The session will be removed from the remote session list if closed.
3156
3157 The progress object (a wrapper!) is for teleportation and similar VM
3158 operations, it will be attempted canceled before powering off the VM.
3159 Failures are logged but ignored.
3160 The progress object will always be removed from the task list.
3161
3162 Returns True if powerOff and session close both succeed.
3163 Returns False if on failure (logged), including when we successfully
3164 kill the VM process.
3165 """
3166 reporter.log2('terminateVmBySession: oSession=%s (pid=%s) oProgress=%s' % (oSession.sName, oSession.getPid(), oProgress));
3167
3168 # Call getPid first to make sure the PID is cached in the wrapper.
3169 oSession.getPid();
3170
3171 #
3172 # If the host is out of memory, just skip all the info collection as it
3173 # requires memory too and seems to wedge.
3174 #
3175 sHostProcessInfo = None;
3176 sHostProcessInfoHung = None;
3177 sLastScreenshotPath = None;
3178 sOsKernelLog = None;
3179 sVgaText = None;
3180 asMiscInfos = [];
3181
3182 if not oSession.fHostMemoryLow:
3183 # Try to fetch the VM process info before meddling with its state.
3184 if self.fAlwaysUploadLogs or reporter.testErrorCount() > 0:
3185 sHostProcessInfo = utils.processGetInfo(oSession.getPid(), fSudo = True);
3186
3187 #
3188 # Pause the VM if we're going to take any screenshots or dig into the
3189 # guest. Failures are quitely ignored.
3190 #
3191 if self.fAlwaysUploadLogs or reporter.testErrorCount() > 0:
3192 try:
3193 if oSession.oVM.state in [ vboxcon.MachineState_Running,
3194 vboxcon.MachineState_LiveSnapshotting,
3195 vboxcon.MachineState_Teleporting ]:
3196 oSession.o.console.pause();
3197 except:
3198 reporter.logXcpt();
3199
3200 #
3201 # Take Screenshot and upload it (see below) to Test Manager if appropriate/requested.
3202 #
3203 if fTakeScreenshot is True or self.fAlwaysUploadScreenshots or reporter.testErrorCount() > 0:
3204 sLastScreenshotPath = os.path.join(self.sScratchPath, "LastScreenshot-%s.png" % oSession.sName);
3205 fRc = oSession.takeScreenshot(sLastScreenshotPath);
3206 if fRc is not True:
3207 sLastScreenshotPath = None;
3208
3209 # Query the OS kernel log from the debugger if appropriate/requested.
3210 if self.fAlwaysUploadLogs or reporter.testErrorCount() > 0:
3211 sOsKernelLog = oSession.queryOsKernelLog();
3212
3213 # Do "info vgatext all" separately.
3214 if self.fAlwaysUploadLogs or reporter.testErrorCount() > 0:
3215 sVgaText = oSession.queryDbgInfoVgaText();
3216
3217 # Various infos (do after kernel because of symbols).
3218 if self.fAlwaysUploadLogs or reporter.testErrorCount() > 0:
3219 # Dump the guest stack for all CPUs.
3220 cCpus = oSession.getCpuCount();
3221 if cCpus > 0:
3222 for iCpu in xrange(0, cCpus):
3223 sThis = oSession.queryDbgGuestStack(iCpu);
3224 if sThis:
3225 asMiscInfos += [
3226 '================ start guest stack VCPU %s ================\n' % (iCpu,),
3227 sThis,
3228 '================ end guest stack VCPU %s ==================\n' % (iCpu,),
3229 ];
3230
3231 for sInfo, sArg in [ ('mode', 'all'),
3232 ('fflags', ''),
3233 ('cpumguest', 'verbose all'),
3234 ('cpumguestinstr', 'symbol all'),
3235 ('exits', ''),
3236 ('pic', ''),
3237 ('apic', ''),
3238 ('apiclvt', ''),
3239 ('apictimer', ''),
3240 ('ioapic', ''),
3241 ('pit', ''),
3242 ('phys', ''),
3243 ('clocks', ''),
3244 ('timers', ''),
3245 ('gdt', ''),
3246 ('ldt', ''),
3247 ]:
3248 if sInfo in ['apic',] and self.fpApiVer < 5.1: # asserts and burns
3249 continue;
3250 sThis = oSession.queryDbgInfo(sInfo, sArg);
3251 if sThis:
3252 if sThis[-1] != '\n':
3253 sThis += '\n';
3254 asMiscInfos += [
3255 '================ start %s %s ================\n' % (sInfo, sArg),
3256 sThis,
3257 '================ end %s %s ==================\n' % (sInfo, sArg),
3258 ];
3259
3260 #
3261 # Terminate the VM
3262 #
3263
3264 # Cancel the progress object if specified.
3265 if oProgress is not None:
3266 if not oProgress.isCompleted() and oProgress.isCancelable():
3267 reporter.log2('terminateVmBySession: canceling "%s"...' % (oProgress.sName));
3268 try:
3269 oProgress.o.cancel();
3270 except:
3271 reporter.logXcpt();
3272 else:
3273 oProgress.wait();
3274 self.removeTask(oProgress);
3275
3276 # Check if the VM has terminated by itself before powering it off.
3277 fClose = True;
3278 fRc = True;
3279 if oSession.needsPoweringOff():
3280 reporter.log('terminateVmBySession: powering off "%s"...' % (oSession.sName,));
3281 fRc = oSession.powerOff(fFudgeOnFailure = False);
3282 if fRc is not True:
3283 # power off failed, try terminate it in a nice manner.
3284 fRc = False;
3285 uPid = oSession.getPid();
3286 if uPid is not None:
3287 #
3288 # Collect some information about the VM process first to have
3289 # some state information for further investigation why powering off failed.
3290 #
3291 sHostProcessInfoHung = utils.processGetInfo(uPid, fSudo = True);
3292
3293 # Exterminate...
3294 reporter.error('terminateVmBySession: Terminating PID %u (VM %s)' % (uPid, oSession.sName));
3295 fClose = base.processTerminate(uPid);
3296 if fClose is True:
3297 self.waitOnDirectSessionClose(oSession.oVM, 5000);
3298 fClose = oSession.waitForTask(1000);
3299
3300 if fClose is not True:
3301 # Being nice failed...
3302 reporter.error('terminateVmBySession: Termination failed, trying to kill PID %u (VM %s) instead' \
3303 % (uPid, oSession.sName));
3304 fClose = base.processKill(uPid);
3305 if fClose is True:
3306 self.waitOnDirectSessionClose(oSession.oVM, 5000);
3307 fClose = oSession.waitForTask(1000);
3308 if fClose is not True:
3309 reporter.error('terminateVmBySession: Failed to kill PID %u (VM %s)' % (uPid, oSession.sName));
3310
3311 # The final steps.
3312 if fClose is True:
3313 reporter.log('terminateVmBySession: closing session "%s"...' % (oSession.sName,));
3314 oSession.close();
3315 self.waitOnDirectSessionClose(oSession.oVM, 10000);
3316 try:
3317 eState = oSession.oVM.state;
3318 except:
3319 reporter.logXcpt();
3320 else:
3321 if eState == vboxcon.MachineState_Aborted:
3322 reporter.error('terminateVmBySession: The VM "%s" aborted!' % (oSession.sName,));
3323 self.removeTask(oSession);
3324
3325 #
3326 # Add the release log, debug log and a screenshot of the VM to the test report.
3327 #
3328 if self.fAlwaysUploadLogs or reporter.testErrorCount() > 0:
3329 oSession.addLogsToReport();
3330
3331 # Add a screenshot if it has been requested and taken successfully.
3332 if sLastScreenshotPath is not None:
3333 if reporter.testErrorCount() > 0:
3334 reporter.addLogFile(sLastScreenshotPath, 'screenshot/failure', 'Last VM screenshot');
3335 else:
3336 reporter.addLogFile(sLastScreenshotPath, 'screenshot/success', 'Last VM screenshot');
3337
3338 # Add the guest OS log if it has been requested and taken successfully.
3339 if sOsKernelLog is not None:
3340 reporter.addLogString(sOsKernelLog, 'kernel.log', 'log/guest/kernel', 'Guest OS kernel log');
3341
3342 # Add "info vgatext all" if we've got it.
3343 if sVgaText is not None:
3344 reporter.addLogString(sVgaText, 'vgatext.txt', 'info/vgatext', 'info vgatext all');
3345
3346 # Add the "info xxxx" items if we've got any.
3347 if asMiscInfos:
3348 reporter.addLogString(u''.join(asMiscInfos), 'info.txt', 'info/collection', 'A bunch of info items.');
3349
3350 # Add the host process info if we were able to retrieve it.
3351 if sHostProcessInfo is not None:
3352 reporter.log('Trying to annotate the VM process report, please stand by...');
3353 fRcTmp = self.annotateAndUploadProcessReport(sHostProcessInfo, 'vmprocess.log',
3354 'process/report/vm', 'Annotated VM process state');
3355 # Upload the raw log for manual annotation in case resolving failed.
3356 if not fRcTmp:
3357 reporter.log('Failed to annotate VM process report, uploading raw report');
3358 reporter.addLogString(sHostProcessInfo, 'vmprocess.log', 'process/report/vm', 'VM process state');
3359
3360 # Add the host process info for failed power off attempts if we were able to retrieve it.
3361 if sHostProcessInfoHung is not None:
3362 reporter.log('Trying to annotate the hung VM process report, please stand by...');
3363 fRcTmp = self.annotateAndUploadProcessReport(sHostProcessInfoHung, 'vmprocess-hung.log',
3364 'process/report/vm', 'Annotated hung VM process state');
3365 # Upload the raw log for manual annotation in case resolving failed.
3366 if not fRcTmp:
3367 reporter.log('Failed to annotate hung VM process report, uploading raw report');
3368 fRcTmp = reporter.addLogString(sHostProcessInfoHung, 'vmprocess-hung.log', 'process/report/vm',
3369 'Hung VM process state');
3370 if not fRcTmp:
3371 try: reporter.log('******* START vmprocess-hung.log *******\n%s\n******* END vmprocess-hung.log *******\n'
3372 % (sHostProcessInfoHung,));
3373 except: pass; # paranoia
3374
3375
3376 return fRc;
3377
3378
3379 #
3380 # Some information query functions (mix).
3381 #
3382 # Methods require the VBox API. If the information is provided by both
3383 # the testboxscript as well as VBox API, we'll check if it matches.
3384 #
3385
3386 def _hasHostCpuFeature(self, sEnvVar, sEnum, fpApiMinVer, fQuiet):
3387 """
3388 Common Worker for hasHostNestedPaging() and hasHostHwVirt().
3389
3390 Returns True / False.
3391 Raises exception on environment / host mismatch.
3392 """
3393 fEnv = os.environ.get(sEnvVar, None);
3394 if fEnv is not None:
3395 fEnv = fEnv.lower() not in [ 'false', 'f', 'not', 'no', 'n', '0', ];
3396
3397 fVBox = None;
3398 self.importVBoxApi();
3399 if self.fpApiVer >= fpApiMinVer and hasattr(vboxcon, sEnum):
3400 try:
3401 fVBox = self.oVBox.host.getProcessorFeature(getattr(vboxcon, sEnum));
3402 except:
3403 if not fQuiet:
3404 reporter.logXcpt();
3405
3406 if fVBox is not None:
3407 if fEnv is not None:
3408 if fEnv != fVBox and not fQuiet:
3409 reporter.log('TestBox configuration overwritten: fVBox=%s (%s) vs. fEnv=%s (%s)'
3410 % (fVBox, sEnum, fEnv, sEnvVar));
3411 return fEnv;
3412 return fVBox;
3413 if fEnv is not None:
3414 return fEnv;
3415 return False;
3416
3417 def hasHostHwVirt(self, fQuiet = False):
3418 """
3419 Checks if hardware assisted virtualization is supported by the host.
3420
3421 Returns True / False.
3422 Raises exception on environment / host mismatch.
3423 """
3424 return self._hasHostCpuFeature('TESTBOX_HAS_HW_VIRT', 'ProcessorFeature_HWVirtEx', 3.1, fQuiet);
3425
3426 def hasHostNestedPaging(self, fQuiet = False):
3427 """
3428 Checks if nested paging is supported by the host.
3429
3430 Returns True / False.
3431 Raises exception on environment / host mismatch.
3432 """
3433 return self._hasHostCpuFeature('TESTBOX_HAS_NESTED_PAGING', 'ProcessorFeature_NestedPaging', 4.2, fQuiet) \
3434 and self.hasHostHwVirt(fQuiet);
3435
3436 def hasHostNestedHwVirt(self, fQuiet = False):
3437 """
3438 Checks if nested hardware-assisted virtualization is supported by the host.
3439
3440 Returns True / False.
3441 Raises exception on environment / host mismatch.
3442 """
3443 return self._hasHostCpuFeature('TESTBOX_HAS_NESTED_HWVIRT', 'ProcessorFeature_NestedHWVirt', 6.0, fQuiet) \
3444 and self.hasHostHwVirt(fQuiet);
3445
3446 def hasHostLongMode(self, fQuiet = False):
3447 """
3448 Checks if the host supports 64-bit guests.
3449
3450 Returns True / False.
3451 Raises exception on environment / host mismatch.
3452 """
3453 # Note that the testboxscript doesn't export this variable atm.
3454 return self._hasHostCpuFeature('TESTBOX_HAS_LONG_MODE', 'ProcessorFeature_LongMode', 3.1, fQuiet);
3455
3456 def getHostCpuCount(self, fQuiet = False):
3457 """
3458 Returns the number of CPUs on the host.
3459
3460 Returns True / False.
3461 Raises exception on environment / host mismatch.
3462 """
3463 cEnv = os.environ.get('TESTBOX_CPU_COUNT', None);
3464 if cEnv is not None:
3465 cEnv = int(cEnv);
3466
3467 try:
3468 cVBox = self.oVBox.host.processorOnlineCount;
3469 except:
3470 if not fQuiet:
3471 reporter.logXcpt();
3472 cVBox = None;
3473
3474 if cVBox is not None:
3475 if cEnv is not None:
3476 assert cVBox == cEnv, 'Misconfigured TestBox: VBox: %u CPUs, testboxscript: %u CPUs' % (cVBox, cEnv);
3477 return cVBox;
3478 if cEnv is not None:
3479 return cEnv;
3480 return 1;
3481
3482 def _getHostCpuDesc(self, fQuiet = False):
3483 """
3484 Internal method used for getting the host CPU description from VBoxSVC.
3485 Returns description string, on failure an empty string is returned.
3486 """
3487 try:
3488 return self.oVBox.host.getProcessorDescription(0);
3489 except:
3490 if not fQuiet:
3491 reporter.logXcpt();
3492 return '';
3493
3494 def isHostCpuAmd(self, fQuiet = False):
3495 """
3496 Checks if the host CPU vendor is AMD.
3497
3498 Returns True / False.
3499 """
3500 sCpuDesc = self._getHostCpuDesc(fQuiet);
3501 return 'AMD' in sCpuDesc or sCpuDesc == 'AuthenticAMD';
3502
3503 def isHostCpuIntel(self, fQuiet = False):
3504 """
3505 Checks if the host CPU vendor is Intel.
3506
3507 Returns True / False.
3508 """
3509 sCpuDesc = self._getHostCpuDesc(fQuiet);
3510 return sCpuDesc.startswith("Intel") or sCpuDesc == 'GenuineIntel';
3511
3512 def isHostCpuVia(self, fQuiet = False):
3513 """
3514 Checks if the host CPU vendor is VIA (or Centaur).
3515
3516 Returns True / False.
3517 """
3518 sCpuDesc = self._getHostCpuDesc(fQuiet);
3519 return sCpuDesc.startswith("VIA") or sCpuDesc == 'CentaurHauls';
3520
3521 def isHostCpuShanghai(self, fQuiet = False):
3522 """
3523 Checks if the host CPU vendor is Shanghai (or Zhaoxin).
3524
3525 Returns True / False.
3526 """
3527 sCpuDesc = self._getHostCpuDesc(fQuiet);
3528 return sCpuDesc.startswith("ZHAOXIN") or sCpuDesc.strip(' ') == 'Shanghai';
3529
3530 def isHostCpuP4(self, fQuiet = False):
3531 """
3532 Checks if the host CPU is a Pentium 4 / Pentium D.
3533
3534 Returns True / False.
3535 """
3536 if not self.isHostCpuIntel(fQuiet):
3537 return False;
3538
3539 (uFamilyModel, _, _, _) = self.oVBox.host.getProcessorCPUIDLeaf(0, 0x1, 0);
3540 return ((uFamilyModel >> 8) & 0xf) == 0xf;
3541
3542 def hasRawModeSupport(self, fQuiet = False):
3543 """
3544 Checks if raw-mode is supported by VirtualBox that the testbox is
3545 configured for it.
3546
3547 Returns True / False.
3548 Raises no exceptions.
3549
3550 Note! Differs from the rest in that we don't require the
3551 TESTBOX_WITH_RAW_MODE value to match the API. It is
3552 sometimes helpful to disable raw-mode on individual
3553 test boxes. (This probably goes for
3554 """
3555 # The environment variable can be used to disable raw-mode.
3556 fEnv = os.environ.get('TESTBOX_WITH_RAW_MODE', None);
3557 if fEnv is not None:
3558 fEnv = fEnv.lower() not in [ 'false', 'f', 'not', 'no', 'n', '0', ];
3559 if fEnv is False:
3560 return False;
3561
3562 # Starting with 5.0 GA / RC2 the API can tell us whether VBox was built
3563 # with raw-mode support or not.
3564 self.importVBoxApi();
3565 if self.fpApiVer >= 5.0:
3566 try:
3567 fVBox = self.oVBox.systemProperties.rawModeSupported;
3568 except:
3569 if not fQuiet:
3570 reporter.logXcpt();
3571 fVBox = True;
3572 if fVBox is False:
3573 return False;
3574
3575 return True;
3576
3577 #
3578 # Testdriver execution methods.
3579 #
3580
3581 def handleTask(self, oTask, sMethod):
3582 """
3583 Callback method for handling unknown tasks in the various run loops.
3584
3585 The testdriver should override this if it already tasks running when
3586 calling startVmAndConnectToTxsViaTcp, txsRunTest or similar methods.
3587 Call super to handle unknown tasks.
3588
3589 Returns True if handled, False if not.
3590 """
3591 reporter.error('%s: unknown task %s' % (sMethod, oTask));
3592 return False;
3593
3594 def txsDoTask(self, oSession, oTxsSession, fnAsync, aArgs):
3595 """
3596 Generic TXS task wrapper which waits both on the TXS and the session tasks.
3597
3598 Returns False on error, logged.
3599 Returns task result on success.
3600 """
3601 # All async methods ends with the following two args.
3602 cMsTimeout = aArgs[-2];
3603 fIgnoreErrors = aArgs[-1];
3604
3605 fRemoveVm = self.addTask(oSession);
3606 fRemoveTxs = self.addTask(oTxsSession);
3607
3608 rc = fnAsync(*aArgs); # pylint: disable=star-args
3609 if rc is True:
3610 rc = False;
3611 oTask = self.waitForTasks(cMsTimeout + 1);
3612 if oTask is oTxsSession:
3613 if oTxsSession.isSuccess():
3614 rc = oTxsSession.getResult();
3615 elif fIgnoreErrors is True:
3616 reporter.log( 'txsDoTask: task failed (%s)' % (oTxsSession.getLastReply()[1],));
3617 else:
3618 reporter.error('txsDoTask: task failed (%s)' % (oTxsSession.getLastReply()[1],));
3619 else:
3620 oTxsSession.cancelTask();
3621 if oTask is None:
3622 if fIgnoreErrors is True:
3623 reporter.log( 'txsDoTask: The task timed out.');
3624 else:
3625 reporter.errorTimeout('txsDoTask: The task timed out.');
3626 elif oTask is oSession:
3627 reporter.error('txsDoTask: The VM terminated unexpectedly');
3628 else:
3629 if fIgnoreErrors is True:
3630 reporter.log( 'txsDoTask: An unknown task %s was returned' % (oTask,));
3631 else:
3632 reporter.error('txsDoTask: An unknown task %s was returned' % (oTask,));
3633 else:
3634 reporter.error('txsDoTask: fnAsync returned %s' % (rc,));
3635
3636 if fRemoveTxs:
3637 self.removeTask(oTxsSession);
3638 if fRemoveVm:
3639 self.removeTask(oSession);
3640 return rc;
3641
3642 # pylint: disable=missing-docstring
3643
3644 def txsDisconnect(self, oSession, oTxsSession, cMsTimeout = 30000, fIgnoreErrors = False):
3645 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncDisconnect,
3646 (self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3647
3648 def txsVer(self, oSession, oTxsSession, cMsTimeout = 30000, fIgnoreErrors = False):
3649 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncVer,
3650 (self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3651
3652 def txsUuid(self, oSession, oTxsSession, cMsTimeout = 30000, fIgnoreErrors = False):
3653 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncUuid,
3654 (self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3655
3656 def txsMkDir(self, oSession, oTxsSession, sRemoteDir, fMode = 0o700, cMsTimeout = 30000, fIgnoreErrors = False):
3657 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncMkDir,
3658 (sRemoteDir, fMode, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3659
3660 def txsMkDirPath(self, oSession, oTxsSession, sRemoteDir, fMode = 0o700, cMsTimeout = 30000, fIgnoreErrors = False):
3661 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncMkDirPath,
3662 (sRemoteDir, fMode, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3663
3664 def txsMkSymlink(self, oSession, oTxsSession, sLinkTarget, sLink, cMsTimeout = 30000, fIgnoreErrors = False):
3665 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncMkSymlink,
3666 (sLinkTarget, sLink, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3667
3668 def txsRmDir(self, oSession, oTxsSession, sRemoteDir, cMsTimeout = 30000, fIgnoreErrors = False):
3669 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncRmDir,
3670 (sRemoteDir, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3671
3672 def txsRmFile(self, oSession, oTxsSession, sRemoteFile, cMsTimeout = 30000, fIgnoreErrors = False):
3673 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncRmFile,
3674 (sRemoteFile, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3675
3676 def txsRmSymlink(self, oSession, oTxsSession, sRemoteSymlink, cMsTimeout = 30000, fIgnoreErrors = False):
3677 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncRmSymlink,
3678 (sRemoteSymlink, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3679
3680 def txsRmTree(self, oSession, oTxsSession, sRemoteTree, cMsTimeout = 30000, fIgnoreErrors = False):
3681 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncRmTree,
3682 (sRemoteTree, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3683
3684 def txsIsDir(self, oSession, oTxsSession, sRemoteDir, cMsTimeout = 30000, fIgnoreErrors = False):
3685 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncIsDir,
3686 (sRemoteDir, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3687
3688 def txsIsFile(self, oSession, oTxsSession, sRemoteFile, cMsTimeout = 30000, fIgnoreErrors = False):
3689 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncIsFile,
3690 (sRemoteFile, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3691
3692 def txsIsSymlink(self, oSession, oTxsSession, sRemoteSymlink, cMsTimeout = 30000, fIgnoreErrors = False):
3693 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncIsSymlink,
3694 (sRemoteSymlink, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3695
3696 def txsCopyFile(self, oSession, oTxsSession, sSrcFile, sDstFile, fMode = 0, cMsTimeout = 30000, fIgnoreErrors = False):
3697 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncCopyFile, \
3698 (sSrcFile, sDstFile, fMode, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3699
3700 def txsUploadFile(self, oSession, oTxsSession, sLocalFile, sRemoteFile, cMsTimeout = 30000, fIgnoreErrors = False):
3701 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncUploadFile, \
3702 (sLocalFile, sRemoteFile, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3703
3704 def txsUploadString(self, oSession, oTxsSession, sContent, sRemoteFile, cMsTimeout = 30000, fIgnoreErrors = False):
3705 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncUploadString, \
3706 (sContent, sRemoteFile, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3707
3708 def txsDownloadFile(self, oSession, oTxsSession, sRemoteFile, sLocalFile, cMsTimeout = 30000, fIgnoreErrors = False):
3709 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncDownloadFile, \
3710 (sRemoteFile, sLocalFile, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3711
3712 def txsDownloadFiles(self, oSession, oTxsSession, aasFiles, fAddToLog = True, fIgnoreErrors = False):
3713 """
3714 Convenience function to get files from the guest, storing them in the
3715 scratch and adding them to the test result set (optional, but default).
3716
3717 The aasFiles parameter contains an array of with guest-path + host-path
3718 pairs, optionally a file 'kind', description and an alternative upload
3719 filename can also be specified.
3720
3721 Host paths are relative to the scratch directory or they must be given
3722 in absolute form. The guest path should be using guest path style.
3723
3724 Returns True on success.
3725 Returns False on failure (unless fIgnoreErrors is set), logged.
3726 """
3727 for asEntry in aasFiles:
3728 # Unpack:
3729 sGstFile = asEntry[0];
3730 sHstFile = asEntry[1];
3731 sKind = asEntry[2] if len(asEntry) > 2 and asEntry[2] else 'misc/other';
3732 sDescription = asEntry[3] if len(asEntry) > 3 and asEntry[3] else '';
3733 sAltName = asEntry[4] if len(asEntry) > 4 and asEntry[4] else None;
3734 assert len(asEntry) <= 5 and sGstFile and sHstFile;
3735 if not os.path.isabs(sHstFile):
3736 sHstFile = os.path.join(self.sScratchPath, sHstFile);
3737
3738 reporter.log2('Downloading file "%s" to "%s" ...' % (sGstFile, sHstFile,));
3739
3740 try: os.unlink(sHstFile); ## @todo txsDownloadFile doesn't truncate the output file.
3741 except: pass;
3742
3743 fRc = self.txsDownloadFile(oSession, oTxsSession, sGstFile, sHstFile, 30 * 1000, fIgnoreErrors);
3744 if fRc:
3745 if fAddToLog:
3746 reporter.addLogFile(sHstFile, sKind, sDescription, sAltName);
3747 else:
3748 if fIgnoreErrors is not True:
3749 return reporter.error('error downloading file "%s" to "%s"' % (sGstFile, sHstFile));
3750 reporter.log('warning: file "%s" was not downloaded, ignoring.' % (sGstFile,));
3751 return True;
3752
3753 def txsDownloadString(self, oSession, oTxsSession, sRemoteFile, sEncoding = 'utf-8', fIgnoreEncodingErrors = True,
3754 cMsTimeout = 30000, fIgnoreErrors = False):
3755 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncDownloadString,
3756 (sRemoteFile, sEncoding, fIgnoreEncodingErrors, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3757
3758 def txsPackFile(self, oSession, oTxsSession, sRemoteFile, sRemoteSource, cMsTimeout = 30000, fIgnoreErrors = False):
3759 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncPackFile, \
3760 (sRemoteFile, sRemoteSource, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3761
3762 def txsUnpackFile(self, oSession, oTxsSession, sRemoteFile, sRemoteDir, cMsTimeout = 30000, fIgnoreErrors = False):
3763 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncUnpackFile, \
3764 (sRemoteFile, sRemoteDir, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3765
3766 def txsExpandString(self, oSession, oTxsSession, sString, cMsTimeout = 30000, fIgnoreErrors = False):
3767 return self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncExpandString, \
3768 (sString, self.adjustTimeoutMs(cMsTimeout), fIgnoreErrors));
3769
3770 # pylint: enable=missing-docstring
3771
3772 def txsCdWait(self,
3773 oSession, # type: vboxwrappers.SessionWrapper
3774 oTxsSession, # type: txsclient.Session
3775 cMsTimeout = 30000, # type: int
3776 sFile = None # type: String
3777 ): # -> bool
3778 """
3779 Mostly an internal helper for txsRebootAndReconnectViaTcp and
3780 startVmAndConnectToTxsViaTcp that waits for the CDROM drive to become
3781 ready. It does this by polling for a file it knows to exist on the CD.
3782
3783 Returns True on success.
3784
3785 Returns False on failure, logged.
3786 """
3787
3788 if sFile is None:
3789 sFile = 'valkit.txt';
3790
3791 reporter.log('txsCdWait: Waiting for file "%s" to become available ...' % (sFile,));
3792
3793 fRemoveVm = self.addTask(oSession);
3794 fRemoveTxs = self.addTask(oTxsSession);
3795 cMsTimeout = self.adjustTimeoutMs(cMsTimeout);
3796 msStart = base.timestampMilli();
3797 cMsTimeout2 = cMsTimeout;
3798 fRc = oTxsSession.asyncIsFile('${CDROM}/%s' % (sFile,), cMsTimeout2);
3799 if fRc is True:
3800 while True:
3801 # wait for it to complete.
3802 oTask = self.waitForTasks(cMsTimeout2 + 1);
3803 if oTask is not oTxsSession:
3804 oTxsSession.cancelTask();
3805 if oTask is None:
3806 reporter.errorTimeout('txsCdWait: The task timed out (after %s ms).'
3807 % (base.timestampMilli() - msStart,));
3808 elif oTask is oSession:
3809 reporter.error('txsCdWait: The VM terminated unexpectedly');
3810 else:
3811 reporter.error('txsCdWait: An unknown task %s was returned' % (oTask,));
3812 fRc = False;
3813 break;
3814 if oTxsSession.isSuccess():
3815 break;
3816
3817 # Check for timeout.
3818 cMsElapsed = base.timestampMilli() - msStart;
3819 if cMsElapsed >= cMsTimeout:
3820 reporter.error('txsCdWait: timed out');
3821 fRc = False;
3822 break;
3823 # delay.
3824 self.sleep(1);
3825
3826 # resubmit the task.
3827 cMsTimeout2 = msStart + cMsTimeout - base.timestampMilli();
3828 cMsTimeout2 = max(cMsTimeout2, 500);
3829 fRc = oTxsSession.asyncIsFile('${CDROM}/%s' % (sFile,), cMsTimeout2);
3830 if fRc is not True:
3831 reporter.error('txsCdWait: asyncIsFile failed');
3832 break;
3833 else:
3834 reporter.error('txsCdWait: asyncIsFile failed');
3835
3836 if not fRc:
3837 # Do some diagnosis to find out why this failed.
3838 ## @todo Identify guest OS type and only run one of the following commands.
3839 fIsNotWindows = True;
3840 reporter.log('txsCdWait: Listing root contents of ${CDROM}:');
3841 if fIsNotWindows:
3842 reporter.log('txsCdWait: Tiggering udevadm ...');
3843 oTxsSession.syncExec("/sbin/udevadm", ("/sbin/udevadm", "trigger", "--verbose"), fIgnoreErrors = True);
3844 time.sleep(15);
3845 oTxsSession.syncExec("/bin/ls", ("/bin/ls", "-al", "${CDROM}"), fIgnoreErrors = True);
3846 reporter.log('txsCdWait: Listing media directory:');
3847 oTxsSession.syncExec('/bin/ls', ('/bin/ls', '-l', '-a', '-R', '/media'), fIgnoreErrors = True);
3848 reporter.log('txsCdWait: Listing mount points / drives:');
3849 oTxsSession.syncExec('/bin/mount', ('/bin/mount',), fIgnoreErrors = True);
3850 oTxsSession.syncExec('/bin/cat', ('/bin/cat', '/etc/fstab'), fIgnoreErrors = True);
3851 oTxsSession.syncExec('/bin/dmesg', ('/bin/dmesg',), fIgnoreErrors = True);
3852 oTxsSession.syncExec('/usr/bin/lshw', ('/usr/bin/lshw', '-c', 'disk'), fIgnoreErrors = True);
3853 oTxsSession.syncExec('/bin/journalctl',
3854 ('/bin/journalctl', '-x', '-b'), fIgnoreErrors = True);
3855 oTxsSession.syncExec('/bin/journalctl',
3856 ('/bin/journalctl', '-x', '-b', '/usr/lib/udisks2/udisksd'), fIgnoreErrors = True);
3857 oTxsSession.syncExec('/usr/bin/udisksctl',
3858 ('/usr/bin/udisksctl', 'info', '-b', '/dev/sr0'), fIgnoreErrors = True);
3859 oTxsSession.syncExec('/bin/systemctl',
3860 ('/bin/systemctl', 'status', 'udisks2'), fIgnoreErrors = True);
3861 oTxsSession.syncExec('/bin/ps',
3862 ('/bin/ps', '-a', '-u', '-x'), fIgnoreErrors = True);
3863 reporter.log('txsCdWait: Mounting manually ...');
3864 for _ in range(3):
3865 oTxsSession.syncExec('/bin/mount', ('/bin/mount', '/dev/sr0', '${CDROM}'), fIgnoreErrors = True);
3866 time.sleep(5);
3867 reporter.log('txsCdWait: Re-Listing media directory:');
3868 oTxsSession.syncExec('/bin/ls', ('/bin/ls', '-l', '-a', '-R', '/media'), fIgnoreErrors = True);
3869 else:
3870 # ASSUMES that we always install Windows on drive C right now.
3871 sWinDir = "C:\\Windows\\System32\\";
3872 # Should work since WinXP Pro.
3873 oTxsSession.syncExec(sWinDir + "wbem\\WMIC.exe",
3874 ("WMIC.exe", "logicaldisk", "get",
3875 "deviceid, volumename, description"),
3876 fIgnoreErrors = True);
3877 oTxsSession.syncExec(sWinDir + " cmd.exe",
3878 ('cmd.exe', '/C', 'dir', '${CDROM}'),
3879 fIgnoreErrors = True);
3880
3881 if fRemoveTxs:
3882 self.removeTask(oTxsSession);
3883 if fRemoveVm:
3884 self.removeTask(oSession);
3885 return fRc;
3886
3887 def txsDoConnectViaTcp(self, oSession, cMsTimeout, fNatForwardingForTxs = False):
3888 """
3889 Mostly an internal worker for connecting to TXS via TCP used by the
3890 *ViaTcp methods.
3891
3892 Returns a tuplet with True/False and TxsSession/None depending on the
3893 result. Errors are logged.
3894 """
3895
3896 reporter.log2('txsDoConnectViaTcp: oSession=%s, cMsTimeout=%s, fNatForwardingForTxs=%s'
3897 % (oSession, cMsTimeout, fNatForwardingForTxs));
3898
3899 cMsTimeout = self.adjustTimeoutMs(cMsTimeout);
3900 oTxsConnect = oSession.txsConnectViaTcp(cMsTimeout, fNatForwardingForTxs = fNatForwardingForTxs);
3901 if oTxsConnect is not None:
3902 self.addTask(oTxsConnect);
3903 fRemoveVm = self.addTask(oSession);
3904 oTask = self.waitForTasks(cMsTimeout + 1);
3905 reporter.log2('txsDoConnectViaTcp: waitForTasks returned %s' % (oTask,));
3906 self.removeTask(oTxsConnect);
3907 if oTask is oTxsConnect:
3908 oTxsSession = oTxsConnect.getResult();
3909 if oTxsSession is not None:
3910 reporter.log('txsDoConnectViaTcp: Connected to TXS on %s.' % (oTxsSession.oTransport.sHostname,));
3911 return (True, oTxsSession);
3912
3913 reporter.error('txsDoConnectViaTcp: failed to connect to TXS.');
3914 else:
3915 oTxsConnect.cancelTask();
3916 if oTask is None:
3917 reporter.errorTimeout('txsDoConnectViaTcp: connect stage 1 timed out');
3918 elif oTask is oSession:
3919 oSession.reportPrematureTermination('txsDoConnectViaTcp: ');
3920 else:
3921 reporter.error('txsDoConnectViaTcp: unknown/wrong task %s' % (oTask,));
3922 if fRemoveVm:
3923 self.removeTask(oSession);
3924 else:
3925 reporter.error('txsDoConnectViaTcp: txsConnectViaTcp failed');
3926 return (False, None);
3927
3928 def startVmAndConnectToTxsViaTcp(self, sVmName, fCdWait = False, cMsTimeout = 15*60000, \
3929 cMsCdWait = 30000, sFileCdWait = None, \
3930 fNatForwardingForTxs = False):
3931 """
3932 Starts the specified VM and tries to connect to its TXS via TCP.
3933 The VM will be powered off if TXS doesn't respond before the specified
3934 time has elapsed.
3935
3936 Returns a the VM and TXS sessions (a two tuple) on success. The VM
3937 session is in the task list, the TXS session is not.
3938 Returns (None, None) on failure, fully logged.
3939 """
3940
3941 # Zap the guest IP to make sure we're not getting a stale entry
3942 # (unless we're restoring the VM of course).
3943 oTestVM = self.oTestVmSet.findTestVmByName(sVmName) if self.oTestVmSet is not None else None;
3944 if oTestVM is None \
3945 or oTestVM.fSnapshotRestoreCurrent is False:
3946 try:
3947 oSession1 = self.openSession(self.getVmByName(sVmName));
3948 oSession1.delGuestPropertyValue('/VirtualBox/GuestInfo/Net/0/V4/IP');
3949 oSession1.saveSettings(True);
3950 del oSession1;
3951 except:
3952 reporter.logXcpt();
3953
3954 # Start the VM.
3955 reporter.log('startVmAndConnectToTxsViaTcp: Starting(/preparing) "%s" (timeout %s s)...' % (sVmName, cMsTimeout / 1000));
3956 reporter.flushall();
3957 oSession = self.startVmByName(sVmName);
3958 if oSession is not None:
3959 # Connect to TXS.
3960 reporter.log2('startVmAndConnectToTxsViaTcp: Started(/prepared) "%s", connecting to TXS ...' % (sVmName,));
3961 (fRc, oTxsSession) = self.txsDoConnectViaTcp(oSession, cMsTimeout, fNatForwardingForTxs);
3962 if fRc is True:
3963 if fCdWait:
3964 # Wait for CD?
3965 reporter.log2('startVmAndConnectToTxsViaTcp: Waiting for file "%s" to become available ...' % (sFileCdWait,));
3966 fRc = self.txsCdWait(oSession, oTxsSession, cMsCdWait, sFileCdWait);
3967 if fRc is not True:
3968 reporter.error('startVmAndConnectToTxsViaTcp: txsCdWait failed');
3969
3970 sVer = self.txsVer(oSession, oTxsSession, cMsTimeout, fIgnoreErrors = True);
3971 if sVer is not False:
3972 reporter.log('startVmAndConnectToTxsViaTcp: TestExecService version %s' % (sVer,));
3973 else:
3974 reporter.log('startVmAndConnectToTxsViaTcp: Unable to retrieve TestExecService version');
3975
3976 if fRc is True:
3977 # Success!
3978 return (oSession, oTxsSession);
3979 else:
3980 reporter.error('startVmAndConnectToTxsViaTcp: txsDoConnectViaTcp failed');
3981 # If something went wrong while waiting for TXS to be started - take VM screenshot before terminate it
3982 self.terminateVmBySession(oSession);
3983 return (None, None);
3984
3985 def txsRebootAndReconnectViaTcp(self, oSession, oTxsSession, fCdWait = False, cMsTimeout = 15*60000, \
3986 cMsCdWait = 30000, sFileCdWait = None, fNatForwardingForTxs = False):
3987 """
3988 Executes the TXS reboot command
3989
3990 Returns A tuple of True and the new TXS session on success.
3991
3992 Returns A tuple of False and either the old TXS session or None on failure.
3993 """
3994 reporter.log2('txsRebootAndReconnect: cMsTimeout=%u' % (cMsTimeout,));
3995
3996 #
3997 # This stuff is a bit complicated because of rebooting being kind of
3998 # disruptive to the TXS and such... The protocol is that TXS will:
3999 # - ACK the reboot command.
4000 # - Shutdown the transport layer, implicitly disconnecting us.
4001 # - Execute the reboot operation.
4002 # - On failure, it will be re-init the transport layer and be
4003 # available pretty much immediately. UUID unchanged.
4004 # - On success, it will be respawed after the reboot (hopefully),
4005 # with a different UUID.
4006 #
4007 fRc = False;
4008 iStart = base.timestampMilli();
4009
4010 # Get UUID.
4011 cMsTimeout2 = min(60000, cMsTimeout);
4012 sUuidBefore = self.txsUuid(oSession, oTxsSession, self.adjustTimeoutMs(cMsTimeout2, 60000));
4013 if sUuidBefore is not False:
4014 # Reboot.
4015 cMsElapsed = base.timestampMilli() - iStart;
4016 cMsTimeout2 = cMsTimeout - cMsElapsed;
4017 fRc = self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncReboot,
4018 (self.adjustTimeoutMs(cMsTimeout2, 60000), False));
4019 if fRc is True:
4020 # Reconnect.
4021 if fNatForwardingForTxs is True:
4022 self.sleep(22); # NAT fudge - Two fixes are wanted: 1. TXS connect retries. 2. Main API reboot/reset hint.
4023 cMsElapsed = base.timestampMilli() - iStart;
4024 (fRc, oTxsSession) = self.txsDoConnectViaTcp(oSession, cMsTimeout - cMsElapsed, fNatForwardingForTxs);
4025 if fRc is True:
4026 # Check the UUID.
4027 cMsElapsed = base.timestampMilli() - iStart;
4028 cMsTimeout2 = min(60000, cMsTimeout - cMsElapsed);
4029 sUuidAfter = self.txsDoTask(oSession, oTxsSession, oTxsSession.asyncUuid,
4030 (self.adjustTimeoutMs(cMsTimeout2, 60000), False));
4031 if sUuidBefore is not False:
4032 if sUuidAfter != sUuidBefore:
4033 reporter.log('The guest rebooted (UUID %s -> %s)' % (sUuidBefore, sUuidAfter))
4034
4035 # Do CD wait if specified.
4036 if fCdWait:
4037 fRc = self.txsCdWait(oSession, oTxsSession, cMsCdWait, sFileCdWait);
4038 if fRc is not True:
4039 reporter.error('txsRebootAndReconnectViaTcp: txsCdWait failed');
4040
4041 sVer = self.txsVer(oSession, oTxsSession, cMsTimeout, fIgnoreErrors = True);
4042 if sVer is not False:
4043 reporter.log('txsRebootAndReconnectViaTcp: TestExecService version %s' % (sVer,));
4044 else:
4045 reporter.log('txsRebootAndReconnectViaTcp: Unable to retrieve TestExecService version');
4046 else:
4047 reporter.error('txsRebootAndReconnectViaTcp: failed to get UUID (after)');
4048 else:
4049 reporter.error('txsRebootAndReconnectViaTcp: did not reboot (UUID %s)' % (sUuidBefore,));
4050 else:
4051 reporter.error('txsRebootAndReconnectViaTcp: txsDoConnectViaTcp failed');
4052 else:
4053 reporter.error('txsRebootAndReconnectViaTcp: reboot failed');
4054 else:
4055 reporter.error('txsRebootAndReconnectViaTcp: failed to get UUID (before)');
4056 return (fRc, oTxsSession);
4057
4058 # pylint: disable=too-many-locals,too-many-arguments
4059
4060 def txsRunTest(self, oTxsSession, sTestName, cMsTimeout, sExecName, asArgs = (), asAddEnv = (), sAsUser = "",
4061 fCheckSessionStatus = False):
4062 """
4063 Executes the specified test task, waiting till it completes or times out.
4064
4065 The VM session (if any) must be in the task list.
4066
4067 Returns True if we executed the task and nothing abnormal happend.
4068 Query the process status from the TXS session.
4069
4070 Returns False if some unexpected task was signalled or we failed to
4071 submit the job.
4072
4073 If fCheckSessionStatus is set to True, the overall session status will be
4074 taken into account and logged as an error on failure.
4075 """
4076 reporter.testStart(sTestName);
4077 reporter.log2('txsRunTest: cMsTimeout=%u sExecName=%s asArgs=%s' % (cMsTimeout, sExecName, asArgs));
4078
4079 # Submit the job.
4080 fRc = False;
4081 if oTxsSession.asyncExec(sExecName, asArgs, asAddEnv, sAsUser, cMsTimeout = self.adjustTimeoutMs(cMsTimeout)):
4082 self.addTask(oTxsSession);
4083
4084 # Wait for the job to complete.
4085 while True:
4086 oTask = self.waitForTasks(cMsTimeout + 1);
4087 if oTask is None:
4088 if fCheckSessionStatus:
4089 reporter.error('txsRunTest: waitForTasks for test "%s" timed out' % (sTestName,));
4090 else:
4091 reporter.log('txsRunTest: waitForTasks for test "%s" timed out' % (sTestName,));
4092 break;
4093 if oTask is oTxsSession:
4094 if fCheckSessionStatus \
4095 and not oTxsSession.isSuccess():
4096 reporter.error('txsRunTest: Test "%s" failed' % (sTestName,));
4097 else:
4098 fRc = True;
4099 reporter.log('txsRunTest: isSuccess=%s getResult=%s' \
4100 % (oTxsSession.isSuccess(), oTxsSession.getResult()));
4101 break;
4102 if not self.handleTask(oTask, 'txsRunTest'):
4103 break;
4104
4105 self.removeTask(oTxsSession);
4106 if not oTxsSession.pollTask():
4107 oTxsSession.cancelTask();
4108 else:
4109 reporter.error('txsRunTest: asyncExec failed');
4110
4111 reporter.testDone();
4112 return fRc;
4113
4114 def txsRunTestRedirectStd(self, oTxsSession, sTestName, cMsTimeout, sExecName, asArgs = (), asAddEnv = (), sAsUser = "",
4115 oStdIn = '/dev/null', oStdOut = '/dev/null', oStdErr = '/dev/null', oTestPipe = '/dev/null'):
4116 """
4117 Executes the specified test task, waiting till it completes or times out,
4118 redirecting stdin, stdout and stderr to the given objects.
4119
4120 The VM session (if any) must be in the task list.
4121
4122 Returns True if we executed the task and nothing abnormal happend.
4123 Query the process status from the TXS session.
4124
4125 Returns False if some unexpected task was signalled or we failed to
4126 submit the job.
4127 """
4128 reporter.testStart(sTestName);
4129 reporter.log2('txsRunTestRedirectStd: cMsTimeout=%u sExecName=%s asArgs=%s' % (cMsTimeout, sExecName, asArgs));
4130
4131 # Submit the job.
4132 fRc = False;
4133 if oTxsSession.asyncExecEx(sExecName, asArgs, asAddEnv, oStdIn, oStdOut, oStdErr,
4134 oTestPipe, sAsUser, cMsTimeout = self.adjustTimeoutMs(cMsTimeout)):
4135 self.addTask(oTxsSession);
4136
4137 # Wait for the job to complete.
4138 while True:
4139 oTask = self.waitForTasks(cMsTimeout + 1);
4140 if oTask is None:
4141 reporter.log('txsRunTestRedirectStd: waitForTasks timed out');
4142 break;
4143 if oTask is oTxsSession:
4144 fRc = True;
4145 reporter.log('txsRunTestRedirectStd: isSuccess=%s getResult=%s'
4146 % (oTxsSession.isSuccess(), oTxsSession.getResult()));
4147 break;
4148 if not self.handleTask(oTask, 'txsRunTestRedirectStd'):
4149 break;
4150
4151 self.removeTask(oTxsSession);
4152 if not oTxsSession.pollTask():
4153 oTxsSession.cancelTask();
4154 else:
4155 reporter.error('txsRunTestRedirectStd: asyncExec failed');
4156
4157 reporter.testDone();
4158 return fRc;
4159
4160 def txsRunTest2(self, oTxsSession1, oTxsSession2, sTestName, cMsTimeout,
4161 sExecName1, asArgs1,
4162 sExecName2, asArgs2,
4163 asAddEnv1 = (), sAsUser1 = '', fWithTestPipe1 = True,
4164 asAddEnv2 = (), sAsUser2 = '', fWithTestPipe2 = True):
4165 """
4166 Executes the specified test tasks, waiting till they complete or
4167 times out. The 1st task is started after the 2nd one.
4168
4169 The VM session (if any) must be in the task list.
4170
4171 Returns True if we executed the task and nothing abnormal happend.
4172 Query the process status from the TXS sessions.
4173
4174 Returns False if some unexpected task was signalled or we failed to
4175 submit the job.
4176 """
4177 reporter.testStart(sTestName);
4178
4179 # Submit the jobs.
4180 fRc = False;
4181 if oTxsSession1.asyncExec(sExecName1, asArgs1, asAddEnv1, sAsUser1, fWithTestPipe1, '1-',
4182 self.adjustTimeoutMs(cMsTimeout)):
4183 self.addTask(oTxsSession1);
4184
4185 self.sleep(2); # fudge! grr
4186
4187 if oTxsSession2.asyncExec(sExecName2, asArgs2, asAddEnv2, sAsUser2, fWithTestPipe2, '2-',
4188 self.adjustTimeoutMs(cMsTimeout)):
4189 self.addTask(oTxsSession2);
4190
4191 # Wait for the jobs to complete.
4192 cPendingJobs = 2;
4193 while True:
4194 oTask = self.waitForTasks(cMsTimeout + 1);
4195 if oTask is None:
4196 reporter.log('txsRunTest2: waitForTasks timed out');
4197 break;
4198
4199 if oTask is oTxsSession1 or oTask is oTxsSession2:
4200 if oTask is oTxsSession1: iTask = 1;
4201 else: iTask = 2;
4202 reporter.log('txsRunTest2: #%u - isSuccess=%s getResult=%s' \
4203 % (iTask, oTask.isSuccess(), oTask.getResult()));
4204 self.removeTask(oTask);
4205 cPendingJobs -= 1;
4206 if cPendingJobs <= 0:
4207 fRc = True;
4208 break;
4209
4210 elif not self.handleTask(oTask, 'txsRunTest'):
4211 break;
4212
4213 self.removeTask(oTxsSession2);
4214 if not oTxsSession2.pollTask():
4215 oTxsSession2.cancelTask();
4216 else:
4217 reporter.error('txsRunTest2: asyncExec #2 failed');
4218
4219 self.removeTask(oTxsSession1);
4220 if not oTxsSession1.pollTask():
4221 oTxsSession1.cancelTask();
4222 else:
4223 reporter.error('txsRunTest2: asyncExec #1 failed');
4224
4225 reporter.testDone();
4226 return fRc;
4227
4228 # pylint: enable=too-many-locals,too-many-arguments
4229
4230
4231 #
4232 # Working with test results via serial port.
4233 #
4234
4235 class TxsMonitorComFile(base.TdTaskBase):
4236 """
4237 Class that monitors a COM output file.
4238 """
4239
4240 def __init__(self, sComRawFile, asStopWords = None):
4241 base.TdTaskBase.__init__(self, utils.getCallerName());
4242 self.sComRawFile = sComRawFile;
4243 self.oStopRegExp = re.compile('\\b(' + '|'.join(asStopWords if asStopWords else ('PASSED', 'FAILED',)) + ')\\b');
4244 self.sResult = None; ##< The result.
4245 self.cchDisplayed = 0; ##< Offset into the file string of what we've already fed to the logger.
4246
4247 def toString(self):
4248 return '<%s sComRawFile=%s oStopRegExp=%s sResult=%s cchDisplayed=%s>' \
4249 % (base.TdTaskBase.toString(self), self.sComRawFile, self.oStopRegExp, self.sResult, self.cchDisplayed,);
4250
4251 def pollTask(self, fLocked = False):
4252 """
4253 Overrides TdTaskBase.pollTask() for the purpose of polling the file.
4254 """
4255 if not fLocked:
4256 self.lockTask();
4257
4258 sFile = utils.noxcptReadFile(self.sComRawFile, '', 'rU');
4259 if len(sFile) > self.cchDisplayed:
4260 sNew = sFile[self.cchDisplayed:];
4261 oMatch = self.oStopRegExp.search(sNew);
4262 if oMatch:
4263 # Done! Get result, flush all the output and signal the task.
4264 self.sResult = oMatch.group(1);
4265 for sLine in sNew.split('\n'):
4266 reporter.log('COM OUTPUT: %s' % (sLine,));
4267 self.cchDisplayed = len(sFile);
4268 self.signalTaskLocked();
4269 else:
4270 # Output whole lines only.
4271 offNewline = sFile.find('\n', self.cchDisplayed);
4272 while offNewline >= 0:
4273 reporter.log('COM OUTPUT: %s' % (sFile[self.cchDisplayed:offNewline]))
4274 self.cchDisplayed = offNewline + 1;
4275 offNewline = sFile.find('\n', self.cchDisplayed);
4276
4277 fRet = self.fSignalled;
4278 if not fLocked:
4279 self.unlockTask();
4280 return fRet;
4281
4282 # Our stuff.
4283 def getResult(self):
4284 """
4285 Returns the connected TXS session object on success.
4286 Returns None on failure or if the task has not yet completed.
4287 """
4288 self.oCv.acquire();
4289 sResult = self.sResult;
4290 self.oCv.release();
4291 return sResult;
4292
4293 def cancelTask(self):
4294 """ Cancels the task. """
4295 self.signalTask();
4296 return True;
4297
4298
4299 def monitorComRawFile(self, oSession, sComRawFile, cMsTimeout = 15*60000, asStopWords = None):
4300 """
4301 Monitors the COM output file for stop words (PASSED and FAILED by default).
4302
4303 Returns the stop word.
4304 Returns None on VM error and timeout.
4305 """
4306
4307 reporter.log2('monitorComRawFile: oSession=%s, cMsTimeout=%s, sComRawFile=%s' % (oSession, cMsTimeout, sComRawFile));
4308
4309 oMonitorTask = self.TxsMonitorComFile(sComRawFile, asStopWords);
4310 self.addTask(oMonitorTask);
4311
4312 cMsTimeout = self.adjustTimeoutMs(cMsTimeout);
4313 oTask = self.waitForTasks(cMsTimeout + 1);
4314 reporter.log2('monitorComRawFile: waitForTasks returned %s' % (oTask,));
4315
4316 if oTask is not oMonitorTask:
4317 oMonitorTask.cancelTask();
4318 self.removeTask(oMonitorTask);
4319
4320 oMonitorTask.pollTask();
4321 return oMonitorTask.getResult();
4322
4323
4324 def runVmAndMonitorComRawFile(self, sVmName, sComRawFile, cMsTimeout = 15*60000, asStopWords = None):
4325 """
4326 Runs the specified VM and monitors the given COM output file for stop
4327 words (PASSED and FAILED by default).
4328
4329 The caller is assumed to have configured the VM to use the given
4330 file. The method will take no action to verify this.
4331
4332 Returns the stop word.
4333 Returns None on VM error and timeout.
4334 """
4335
4336 # Start the VM.
4337 reporter.log('runVmAndMonitorComRawFile: Starting(/preparing) "%s" (timeout %s s)...' % (sVmName, cMsTimeout / 1000));
4338 reporter.flushall();
4339 oSession = self.startVmByName(sVmName);
4340 if oSession is not None:
4341 # Let it run and then terminate it.
4342 sRet = self.monitorComRawFile(oSession, sComRawFile, cMsTimeout, asStopWords);
4343 self.terminateVmBySession(oSession);
4344 else:
4345 sRet = None;
4346 return sRet;
4347
4348 #
4349 # Other stuff
4350 #
4351
4352 def waitForGAs(self,
4353 oSession, # type: vboxwrappers.SessionWrapper
4354 cMsTimeout = 120000, aenmWaitForRunLevels = None, aenmWaitForActive = None, aenmWaitForInactive = None):
4355 """
4356 Waits for the guest additions to enter a certain state.
4357
4358 aenmWaitForRunLevels - List of run level values to wait for (success if one matches).
4359 aenmWaitForActive - List facilities (type values) that must be active.
4360 aenmWaitForInactive - List facilities (type values) that must be inactive.
4361
4362 Defaults to wait for AdditionsRunLevelType_Userland if nothing else is given.
4363
4364 Returns True on success, False w/ error logging on timeout or failure.
4365 """
4366 reporter.log2('waitForGAs: oSession=%s, cMsTimeout=%s' % (oSession, cMsTimeout,));
4367
4368 #
4369 # Get IGuest:
4370 #
4371 try:
4372 oIGuest = oSession.o.console.guest;
4373 except:
4374 return reporter.errorXcpt();
4375
4376 #
4377 # Create a wait task:
4378 #
4379 from testdriver.vboxwrappers import AdditionsStatusTask;
4380 try:
4381 oGaStatusTask = AdditionsStatusTask(oSession = oSession,
4382 oIGuest = oIGuest,
4383 cMsTimeout = cMsTimeout,
4384 aenmWaitForRunLevels = aenmWaitForRunLevels,
4385 aenmWaitForActive = aenmWaitForActive,
4386 aenmWaitForInactive = aenmWaitForInactive);
4387 except:
4388 return reporter.errorXcpt();
4389
4390 #
4391 # Add the task and make sure the VM session is also present.
4392 #
4393 self.addTask(oGaStatusTask);
4394 fRemoveSession = self.addTask(oSession);
4395 oTask = self.waitForTasks(cMsTimeout + 1);
4396 reporter.log2('waitForGAs: returned %s (oGaStatusTask=%s, oSession=%s)' % (oTask, oGaStatusTask, oSession,));
4397 self.removeTask(oGaStatusTask);
4398 if fRemoveSession:
4399 self.removeTask(oSession);
4400
4401 #
4402 # Digest the result.
4403 #
4404 if oTask is oGaStatusTask:
4405 fSucceeded = oGaStatusTask.getResult();
4406 if fSucceeded is True:
4407 reporter.log('waitForGAs: Succeeded.');
4408 else:
4409 reporter.error('waitForGAs: Failed.');
4410 else:
4411 oGaStatusTask.cancelTask();
4412 if oTask is None:
4413 reporter.error('waitForGAs: Timed out.');
4414 elif oTask is oSession:
4415 oSession.reportPrematureTermination('waitForGAs: ');
4416 else:
4417 reporter.error('waitForGAs: unknown/wrong task %s' % (oTask,));
4418 fSucceeded = False;
4419 return fSucceeded;
4420
4421 @staticmethod
4422 def controllerTypeToName(eControllerType):
4423 """
4424 Translate a controller type to a standard controller name.
4425 """
4426 if eControllerType in (vboxcon.StorageControllerType_PIIX3, vboxcon.StorageControllerType_PIIX4,):
4427 sName = "IDE Controller";
4428 elif eControllerType == vboxcon.StorageControllerType_IntelAhci:
4429 sName = "SATA Controller";
4430 elif eControllerType == vboxcon.StorageControllerType_LsiLogicSas:
4431 sName = "SAS Controller";
4432 elif eControllerType in (vboxcon.StorageControllerType_LsiLogic, vboxcon.StorageControllerType_BusLogic,):
4433 sName = "SCSI Controller";
4434 elif eControllerType == vboxcon.StorageControllerType_NVMe:
4435 sName = "NVMe Controller";
4436 elif eControllerType == vboxcon.StorageControllerType_VirtioSCSI:
4437 sName = "VirtIO SCSI Controller";
4438 else:
4439 sName = "Storage Controller";
4440 return sName;
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette