source: vbox/trunk/src/libs/liblzma-5.4.1/api/lzma/stream_flags.h@ 101938

/**
 * \file        lzma/stream_flags.h
 * \brief       .xz Stream Header and Stream Footer encoder and decoder
 */

/*
 * Author: Lasse Collin
 *
 * This file has been put into the public domain.
 * You can do whatever you want with this file.
 *
 * See ../lzma.h for information about liblzma as a whole.
 */

#ifndef LZMA_H_INTERNAL
#       error Never include this file directly. Use <lzma.h> instead.
#endif


/**
 * \brief       Size of Stream Header and Stream Footer
 *
 * Stream Header and Stream Footer have the same size and they are not
 * going to change even if a newer version of the .xz file format is
 * developed in future.
 */
#define LZMA_STREAM_HEADER_SIZE 12


/**
 * \brief       Options for encoding/decoding Stream Header and Stream Footer
 */
typedef struct {
        /**
         * \brief       Stream Flags format version
         *
         * To prevent API and ABI breakages if new features are needed in
         * Stream Header or Stream Footer, a version number is used to
         * indicate which fields in this structure are in use. For now,
         * version must always be zero. With non-zero version, the
         * lzma_stream_header_encode() and lzma_stream_footer_encode()
         * will return LZMA_OPTIONS_ERROR.
         *
         * lzma_stream_header_decode() and lzma_stream_footer_decode()
         * will always set this to the lowest value that supports all the
         * features indicated by the Stream Flags field. The application
         * must check that the version number set by the decoding functions
         * is supported by the application. Otherwise it is possible that
         * the application will decode the Stream incorrectly.
         */
        uint32_t version;

        /**
         * \brief       Backward Size
         *
         * Backward Size must be a multiple of four bytes. In this Stream
         * format version, Backward Size is the size of the Index field.
         *
         * Backward Size isn't actually part of the Stream Flags field, but
         * it is convenient to include in this structure anyway. Backward
         * Size is present only in the Stream Footer. There is no need to
         * initialize backward_size when encoding Stream Header.
         *
         * lzma_stream_header_decode() always sets backward_size to
         * LZMA_VLI_UNKNOWN so that it is convenient to use
         * lzma_stream_flags_compare() when both Stream Header and Stream
         * Footer have been decoded.
         */
        lzma_vli backward_size;
#       define LZMA_BACKWARD_SIZE_MIN 4
#       define LZMA_BACKWARD_SIZE_MAX (LZMA_VLI_C(1) << 34)

        /**
         * \brief       Check ID
         *
         * This indicates the type of the integrity check calculated from
         * uncompressed data.
         */
        lzma_check check;

        /*
         * Reserved space to allow possible future extensions without
         * breaking the ABI. You should not touch these, because the
         * names of these variables may change.
         *
         * (We will never be able to use all of these since Stream Flags
         * is just two bytes plus Backward Size of four bytes. But it's
         * nice to have the proper types when they are needed.)
         */
        lzma_reserved_enum reserved_enum1;
        lzma_reserved_enum reserved_enum2;
        lzma_reserved_enum reserved_enum3;
        lzma_reserved_enum reserved_enum4;
        lzma_bool reserved_bool1;
        lzma_bool reserved_bool2;
        lzma_bool reserved_bool3;
        lzma_bool reserved_bool4;
        lzma_bool reserved_bool5;
        lzma_bool reserved_bool6;
        lzma_bool reserved_bool7;
        lzma_bool reserved_bool8;
        uint32_t reserved_int1;
        uint32_t reserved_int2;

} lzma_stream_flags;


/**
 * \brief       Encode Stream Header
 *
 * \param       options     Stream Header options to be encoded.
 *                          options->backward_size is ignored and doesn't
 *                          need to be initialized.
 * \param       out         Beginning of the output buffer of
 *                          LZMA_STREAM_HEADER_SIZE bytes.
 *
 * \return      - LZMA_OK: Encoding was successful.
 *              - LZMA_OPTIONS_ERROR: options->version is not supported by
 *                this liblzma version.
 *              - LZMA_PROG_ERROR: Invalid options.
 */
extern LZMA_API(lzma_ret) lzma_stream_header_encode(
                const lzma_stream_flags *options, uint8_t *out)
                lzma_nothrow lzma_attr_warn_unused_result;


/**
 * \brief       Encode Stream Footer
 *
 * \param       options     Stream Footer options to be encoded.
 * \param       out         Beginning of the output buffer of
 *                          LZMA_STREAM_HEADER_SIZE bytes.
 *
 * \return      - LZMA_OK: Encoding was successful.
 *              - LZMA_OPTIONS_ERROR: options->version is not supported by
 *                this liblzma version.
 *              - LZMA_PROG_ERROR: Invalid options.
 */
extern LZMA_API(lzma_ret) lzma_stream_footer_encode(
                const lzma_stream_flags *options, uint8_t *out)
                lzma_nothrow lzma_attr_warn_unused_result;


/**
 * \brief       Decode Stream Header
 *
 * \param       options     Target for the decoded Stream Header options.
 * \param       in          Beginning of the input buffer of
 *                          LZMA_STREAM_HEADER_SIZE bytes.
 *
 * options->backward_size is always set to LZMA_VLI_UNKNOWN. This is to
 * help comparing Stream Flags from Stream Header and Stream Footer with
 * lzma_stream_flags_compare().
 *
 * \return      - LZMA_OK: Decoding was successful.
 *              - LZMA_FORMAT_ERROR: Magic bytes don't match, thus the given
 *                buffer cannot be Stream Header.
 *              - LZMA_DATA_ERROR: CRC32 doesn't match, thus the header
 *                is corrupt.
 *              - LZMA_OPTIONS_ERROR: Unsupported options are present
 *                in the header.
 *
 * \note        When decoding .xz files that contain multiple Streams, it may
 *              make sense to print "file format not recognized" only if
 *              decoding of the Stream Header of the _first_ Stream gives
 *              LZMA_FORMAT_ERROR. If non-first Stream Header gives
 *              LZMA_FORMAT_ERROR, the message used for LZMA_DATA_ERROR is
 *              probably more appropriate.
 *
 *              For example, Stream decoder in liblzma uses LZMA_DATA_ERROR if
 *              LZMA_FORMAT_ERROR is returned by lzma_stream_header_decode()
 *              when decoding non-first Stream.
 */
extern LZMA_API(lzma_ret) lzma_stream_header_decode(
                lzma_stream_flags *options, const uint8_t *in)
                lzma_nothrow lzma_attr_warn_unused_result;


/**
 * \brief       Decode Stream Footer
 *
 * \param       options     Target for the decoded Stream Header options.
 * \param       in          Beginning of the input buffer of
 *                          LZMA_STREAM_HEADER_SIZE bytes.
 *
 * \return      - LZMA_OK: Decoding was successful.
 *              - LZMA_FORMAT_ERROR: Magic bytes don't match, thus the given
 *                buffer cannot be Stream Footer.
 *              - LZMA_DATA_ERROR: CRC32 doesn't match, thus the Stream Footer
 *                is corrupt.
 *              - LZMA_OPTIONS_ERROR: Unsupported options are present
 *                in Stream Footer.
 *
 * \note        If Stream Header was already decoded successfully, but
 *              decoding Stream Footer returns LZMA_FORMAT_ERROR, the
 *              application should probably report some other error message
 *              than "file format not recognized", since the file more likely
 *              is corrupt (possibly truncated). Stream decoder in liblzma
 *              uses LZMA_DATA_ERROR in this situation.
 */
extern LZMA_API(lzma_ret) lzma_stream_footer_decode(
                lzma_stream_flags *options, const uint8_t *in)
                lzma_nothrow lzma_attr_warn_unused_result;


/**
 * \brief       Compare two lzma_stream_flags structures
 *
 * backward_size values are compared only if both are not
 * LZMA_VLI_UNKNOWN.
 *
 * \return      - LZMA_OK: Both are equal. If either had backward_size set
 *                to LZMA_VLI_UNKNOWN, backward_size values were not
 *                compared or validated.
 *              - LZMA_DATA_ERROR: The structures differ.
 *              - LZMA_OPTIONS_ERROR: version in either structure is greater
 *                than the maximum supported version (currently zero).
 *              - LZMA_PROG_ERROR: Invalid value, e.g. invalid check or
 *                backward_size.
 */
extern LZMA_API(lzma_ret) lzma_stream_flags_compare(
                const lzma_stream_flags *a, const lzma_stream_flags *b)
                lzma_nothrow lzma_attr_pure;