nsFileSpec.h@ 84032

Last change on this file since 84032 was 1, checked in by vboxsync, 55 years ago
import
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 34.4 KB

Line
1	/* -- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -- */
2	/* *** BEGIN LICENSE BLOCK ***
3	* Version: MPL 1.1/GPL 2.0/LGPL 2.1
4	*
5	* The contents of this file are subject to the Mozilla Public License Version
6	* 1.1 (the "License"); you may not use this file except in compliance with
7	* the License. You may obtain a copy of the License at
8	* http://www.mozilla.org/MPL/
9	*
10	* Software distributed under the License is distributed on an "AS IS" basis,
11	* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
12	* for the specific language governing rights and limitations under the
13	* License.
14	*
15	* The Original Code is mozilla.org code.
16	*
17	* The Initial Developer of the Original Code is
18	* Netscape Communications Corporation.
19	* Portions created by the Initial Developer are Copyright (C) 1998
20	* the Initial Developer. All Rights Reserved.
21	*
22	* Contributor(s):
23	*
24	* Alternatively, the contents of this file may be used under the terms of
25	* either of the GNU General Public License Version 2 or later (the "GPL"),
26	* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
27	* in which case the provisions of the GPL or the LGPL are applicable instead
28	* of those above. If you wish to allow use of your version of this file only
29	* under the terms of either the GPL or the LGPL, and not to allow others to
30	* use your version of this file under the terms of the MPL, indicate your
31	* decision by deleting the provisions above and replace them with the notice
32	* and other provisions required by the GPL or the LGPL. If you do not delete
33	* the provisions above, a recipient may use your version of this file under
34	* the terms of any one of the MPL, the GPL or the LGPL.
35	*
36	* *** END LICENSE BLOCK *** */
37
38
39
40
41	/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
42	THESE CLASSES ARE DEPRECATED AND UNSUPPORTED! USE \|nsIFile\| and \|nsILocalFile\|.
43	* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
44
45
46
47
48
49
50
51
52
53
54	// First checked in on 98/11/20 by John R. McMullen in the wrong directory.
55	// Checked in again 98/12/04.
56	// Polished version 98/12/08.
57
58	//========================================================================================
59	//
60	// Classes defined:
61	//
62	// nsFilePath, nsFileURL, nsFileSpec, nsPersistentFileDescriptor
63	// nsDirectoryIterator.
64	//
65	// Q. How should I represent files at run time?
66	// A. Use nsFileSpec. Using char* will lose information on some platforms.
67	//
68	// Q. Then what are nsFilePath and nsFileURL for?
69	// A. Only when you need a char* parameter for legacy code.
70	//
71	// Q. How should I represent files in a persistent way (eg, in a disk file)?
72	// A. Use nsPersistentFileDescriptor. Convert to and from nsFileSpec at run time.
73	//
74	// This suite provides the following services:
75	//
76	// 1. Encapsulates all platform-specific file details, so that files can be
77	// described correctly without any platform #ifdefs
78	//
79	// 2. Type safety. This will fix the problems that used to occur because people
80	// confused file paths. They used to use const char*, which could mean three
81	// or four different things. Bugs were introduced as people coded, right up
82	// to the moment Communicator 4.5 shipped.
83	//
84	// 3. Used in conjunction with nsFileStream.h (q.v.), this supports all the power
85	// and readability of the ansi stream syntax.
86	//
87	// Basic example:
88	//
89	// nsFilePath myPath("/Development/iotest.txt");
90	//
91	// nsOutputFileStream testStream(nsFileSpec(myPath));
92	// testStream << "Hello World" << nsEndl;
93	//
94	// 4. Handy methods for manipulating file specifiers safely, e.g. MakeUnique(),
95	// SetLeafName(), Exists().
96	//
97	// 5. Easy cross-conversion.
98	//
99	// Examples:
100	//
101	// Initialize a URL from a string
102	//
103	// nsFileURL fileURL("file:///Development/MPW/MPW%20Shell");
104	//
105	// Initialize a Unix-style path from a URL
106	//
107	// nsFilePath filePath(fileURL);
108	//
109	// Initialize a file spec from a URL
110	//
111	// nsFileSpec fileSpec(fileURL);
112	//
113	// Make the spec unique.
114	//
115	// fileSpec.MakeUnique();
116	//
117	// Assign the spec to a URL (causing conversion)
118	//
119	// fileURL = fileSpec;
120	//
121	// Assign a unix path using a string
122	//
123	// filePath = "/Development/MPW/SysErrs.err";
124	//
125	// Assign to a file spec using a unix path (causing conversion).
126	//
127	// fileSpec = filePath;
128	//
129	// Make this unique.
130	//
131	// fileSpec.MakeUnique();
132	//
133	// 6. Fixes a bug that have been there for a long time, and
134	// is inevitable if you use NSPR alone, where files are described as paths.
135	//
136	// The problem affects platforms (Macintosh) in which a path does not fully
137	// specify a file, because two volumes can have the same name. This
138	// is solved by holding a "private" native file spec inside the
139	// nsFilePath and nsFileURL classes, which is used when appropriate.
140	//
141	//========================================================================================
142
143	#ifndef _FILESPEC_H_
144	#define _FILESPEC_H_
145
146	#include "xpcomobsolete.h"
147	#include "nsError.h"
148	#include "nsString.h"
149	#include "nsReadableUtils.h"
150	#include "nsCRT.h"
151	#include "prtypes.h"
152
153	//========================================================================================
154	// Compiler-specific macros, as needed
155	//========================================================================================
156	#if !defined(NS_USING_NAMESPACE) && (defined(__MWERKS__) \|\| defined(_MSC_VER))
157	#define NS_USING_NAMESPACE
158	#endif
159
160	#ifdef NS_USING_NAMESPACE
161
162	#define NS_NAMESPACE_PROTOTYPE
163	#define NS_NAMESPACE namespace
164	#define NS_NAMESPACE_END
165	#define NS_EXPLICIT explicit
166	#else
167
168	#define NS_NAMESPACE_PROTOTYPE static
169	#define NS_NAMESPACE struct
170	#define NS_NAMESPACE_END ;
171	#define NS_EXPLICIT
172
173	#endif
174	//=========================== End Compiler-specific macros ===============================
175
176	#include "nsILocalFile.h"
177	#include "nsCOMPtr.h"
178
179	#if defined(XP_MAC)
180	#include <Files.h>
181	#include "nsILocalFileMac.h"
182	#elif defined(XP_UNIX) \|\| defined(XP_BEOS)
183	#include <dirent.h>
184	#elif defined(XP_WIN)
185
186	// This clashes with some of the Win32 system headers (specifically,
187	// winbase.h). Hopefully they'll have been included first; else we may
188	// have problems. We could include winbase.h before doing this;
189	// unfortunately, it's bring in too much crap and'd slow stuff down
190	// more than it's worth doing.
191	#ifdef CreateDirectory
192	#undef CreateDirectory
193	#endif
194
195	#include "prio.h"
196	#elif defined(XP_OS2)
197	#define INCL_DOS
198	#define INCL_DOSERRORS
199	#define INCL_WIN
200	#define INCL_GPI
201	#include <os2.h>
202	#include "prio.h"
203	#endif
204
205	//========================================================================================
206	// Here are the allowable ways to describe a file.
207	//========================================================================================
208
209	class nsFileSpec; // Preferred. For i/o use nsInputFileStream, nsOutputFileStream
210	class nsFilePath;
211	class nsFileURL;
212	class nsNSPRPath; // This can be passed to NSPR file I/O routines, if you must.
213	class nsPersistentFileDescriptor; // Used for storage across program launches.
214
215	#define kFileURLPrefix "file://"
216	#define kFileURLPrefixLength (7)
217
218	class nsOutputStream;
219	class nsInputStream;
220	class nsIOutputStream;
221	class nsIInputStream;
222	class nsOutputFileStream;
223	class nsInputFileStream;
224	class nsOutputConsoleStream;
225
226	class nsIUnicodeEncoder;
227	class nsIUnicodeDecoder;
228
229	//========================================================================================
230	// Conversion of native file errors to nsresult values. These are really only for use
231	// in the file module, clients of this interface shouldn't really need them.
232	// Error results returned from this interface have, in the low-order 16 bits,
233	// native errors that are masked to 16 bits. Assumption: a native error of 0 is success
234	// on all platforms. Note the way we define this using an inline function. This
235	// avoids multiple evaluation if people go NS_FILE_RESULT(function_call()).
236	#define NS_FILE_RESULT(x) ns_file_convert_result((PRInt32)x)
237	nsresult ns_file_convert_result(PRInt32 nativeErr);
238	#define NS_FILE_FAILURE NS_FILE_RESULT(-1)
239
240	//========================================================================================
241	class nsSimpleCharString
242	// An envelope for char*: reference counted. Used internally by all the nsFileSpec
243	// classes below.
244	//========================================================================================
245	{
246	public:
247	nsSimpleCharString();
248	nsSimpleCharString(const char*);
249	nsSimpleCharString(const nsString&);
250	nsSimpleCharString(const nsSimpleCharString&);
251	nsSimpleCharString(const char* inData, PRUint32 inLength);
252
253	~nsSimpleCharString();
254
255	void operator = (const char*);
256	void operator = (const nsString&);
257	void operator = (const nsSimpleCharString&);
258
259	operator const char*() const { return mData ? mData->mString : 0; }
260	operator char* ()
261	{
262	ReallocData(Length()); // requires detaching if shared...
263	return mData ? mData->mString : 0;
264	}
265	PRBool operator == (const char*);
266	PRBool operator == (const nsString&);
267	PRBool operator == (const nsSimpleCharString&);
268
269	void operator += (const char* inString);
270	nsSimpleCharString operator + (const char* inString) const;
271
272	char operator [](int i) const { return mData ? mData->mString[i] : '\0'; }
273	char& operator [](int i)
274	{
275	if (i >= (int)Length())
276	ReallocData((PRUint32)i + 1);
277	return mData->mString[i]; // caveat appelator
278	}
279	char& operator [](unsigned int i) { return (*this)[(int)i]; }
280
281	void Catenate(const char* inString1, const char* inString2);
282
283	void SetToEmpty();
284	PRBool IsEmpty() const { return Length() == 0; }
285
286	PRUint32 Length() const { return mData ? mData->mLength : 0; }
287	void SetLength(PRUint32 inLength) { ReallocData(inLength); }
288	void CopyFrom(const char* inData, PRUint32 inLength);
289	void LeafReplace(char inSeparator, const char* inLeafName);
290	char* GetLeaf(char inSeparator) const; // use PR_Free()
291	void Unescape();
292
293	protected:
294
295	void AddRefData();
296	void ReleaseData();
297	void ReallocData(PRUint32 inLength);
298
299	//--------------------------------------------------
300	// Data
301	//--------------------------------------------------
302
303	protected:
304
305	struct Data {
306	int mRefCount;
307	PRUint32 mLength;
308	char mString[1];
309	};
310	Data* mData;
311	}; // class nsSimpleCharString
312
313	//========================================================================================
314	class NS_COM_OBSOLETE nsFileSpec
315	// This is whatever each platform really prefers to describe files as. Declared first
316	// because the other two types have an embedded nsFileSpec object.
317	//========================================================================================
318	{
319	public:
320	nsFileSpec();
321
322	// These two meathods take native file paths.
323	NS_EXPLICIT nsFileSpec(const char* inNativePath, PRBool inCreateDirs = PR_FALSE);
324	NS_EXPLICIT nsFileSpec(const nsString& inNativePath, PRBool inCreateDirs = PR_FALSE);
325
326
327	NS_EXPLICIT nsFileSpec(const nsFilePath& inPath);
328	NS_EXPLICIT nsFileSpec(const nsFileURL& inURL);
329	nsFileSpec(const nsFileSpec& inPath);
330	virtual ~nsFileSpec();
331
332	// These two operands take native file paths.
333	void operator = (const char* inNativePath);
334
335	void operator = (const nsFilePath& inPath);
336	void operator = (const nsFileURL& inURL);
337	void operator = (const nsFileSpec& inOther);
338	void operator = (const nsPersistentFileDescriptor& inOther);
339
340	PRBool operator ==(const nsFileSpec& inOther) const;
341	PRBool operator !=(const nsFileSpec& inOther) const;
342
343
344	// Returns a native path, and allows the
345	// path to be "passed" to legacy code. This practice
346	// is VERY EVIL and should only be used to support legacy
347	// code. Using it guarantees bugs on Macintosh.
348	// The path is cached and freed by the nsFileSpec destructor
349	// so do not delete (or free) it. See also nsNSPRPath below,
350	// if you really must pass a string to PR_OpenFile().
351	// Doing so will introduce two automatic bugs.
352	const char* GetCString() const;
353
354	// Same as GetCString (please read the comments).
355	// Do not try to free this!
356	operator const char* () const { return GetCString(); }
357
358	// Same as GetCString (please read the comments).
359	// Do not try to free this!
360	const char* GetNativePathCString() const { return GetCString(); }
361
362	PRBool IsChildOf(nsFileSpec &possibleParent);
363
364	#if defined(XP_MAC)
365	// For Macintosh people, this is meant to be useful in its own right as a C++ version
366	// of the FSSpec struct.
367	nsFileSpec(
368	short vRefNum,
369	long parID,
370	ConstStr255Param name,
371	PRBool resolveAlias = PR_TRUE);
372
373	nsFileSpec(const FSSpec& inSpec, PRBool resolveAlias = PR_TRUE);
374	void operator = (const FSSpec& inSpec);
375
376	operator FSSpec* () { return &mSpec; }
377	operator const FSSpec* const () { return &mSpec; }
378	operator FSSpec& () { return mSpec; }
379	operator const FSSpec& () const { return mSpec; }
380
381	const FSSpec& GetFSSpec() const { return mSpec; }
382	FSSpec& GetFSSpec() { return mSpec; }
383	ConstFSSpecPtr GetFSSpecPtr() const { return &mSpec; }
384	FSSpecPtr GetFSSpecPtr() { return &mSpec; }
385	void MakeAliasSafe();
386	void MakeUnique(ConstStr255Param inSuggestedLeafName);
387	StringPtr GetLeafPName() { return mSpec.name; }
388	ConstStr255Param GetLeafPName() const { return mSpec.name; }
389
390	OSErr GetCatInfo(CInfoPBRec& outInfo) const;
391
392	OSErr SetFileTypeAndCreator(OSType type, OSType creator);
393	OSErr GetFileTypeAndCreator(OSType* type, OSType* creator);
394
395	#endif // end of Macintosh utility methods.
396
397	PRBool Valid() const { return NS_SUCCEEDED(Error()); }
398	nsresult Error() const
399	{
400	#if !defined(XP_MAC)
401	if (mPath.IsEmpty() && NS_SUCCEEDED(mError))
402	((nsFileSpec*)this)->mError = NS_ERROR_NOT_INITIALIZED;
403	#endif
404	return mError;
405	}
406	PRBool Failed() const { return (PRBool)NS_FAILED(Error()); }
407
408	//--------------------------------------------------
409	// Queries and path algebra. These do not modify the disk.
410	//--------------------------------------------------
411
412	char* GetLeafName() const; // Allocated. Use nsCRT::free().
413	// inLeafName can be a relative path, so this allows
414	// one kind of concatenation of "paths".
415	void SetLeafName(const char* inLeafName);
416
417	// Return the filespec of the parent directory. Used
418	// in conjunction with GetLeafName(), this lets you
419	// parse a path into a list of node names. Beware,
420	// however, that the top node is still not a name,
421	// but a spec. Volumes on Macintosh can have identical
422	// names. Perhaps could be used for an operator --() ?
423	void GetParent(nsFileSpec& outSpec) const;
424
425
426	// ie nsFileSpec::TimeStamp. This is 32 bits now,
427	// but might change, eg, to a 64-bit class. So use the
428	// typedef, and use a streaming operator to convert
429	// to a string, so that your code won't break. It's
430	// none of your business what the number means. Don't
431	// rely on the implementation.
432	typedef PRUint32 TimeStamp;
433
434	// This will return different values on different
435	// platforms, even for the same file (eg, on a server).
436	// But if the platform is constant, it will increase after
437	// every file modification.
438	void GetModDate(TimeStamp& outStamp) const;
439
440	PRBool ModDateChanged(const TimeStamp& oldStamp) const
441	{
442	TimeStamp newStamp;
443	GetModDate(newStamp);
444	return newStamp != oldStamp;
445	}
446
447	PRUint32 GetFileSize() const;
448	PRInt64 GetDiskSpaceAvailable() const;
449
450	nsFileSpec operator + (const char* inRelativeUnixPath) const;
451
452	// Concatenate the relative path to this directory.
453	// Used for constructing the filespec of a descendant.
454	// This must be a directory for this to work. This differs
455	// from SetLeafName(), since the latter will work
456	// starting with a sibling of the directory and throws
457	// away its leaf information, whereas this one assumes
458	// this is a directory, and the relative path starts
459	// "below" this.
460	void operator += (const char* inRelativeUnixPath);
461
462
463	void MakeUnique();
464	void MakeUnique(const char* inSuggestedLeafName);
465
466
467	PRBool IsDirectory() const; // More stringent than Exists()
468	PRBool IsFile() const; // More stringent than Exists()
469	PRBool Exists() const;
470
471	PRBool IsHidden() const;
472
473	PRBool IsSymlink() const;
474
475	//--------------------------------------------------
476	// Creation and deletion of objects. These can modify the disk.
477	//--------------------------------------------------
478
479	// Called for the spec of an alias. Modifies the spec to
480	// point to the original. Sets mError.
481	nsresult ResolveSymlink(PRBool& wasSymlink);
482
483	void CreateDirectory(int mode = 0775 /* for unix */);
484	void CreateDir(int mode = 0775) { CreateDirectory(mode); }
485	// workaround for yet another VC++ bug with long identifiers.
486	void Delete(PRBool inRecursive) const;
487	nsresult Truncate(PRInt32 aNewLength) const;
488	void RecursiveCopy(nsFileSpec newDir) const;
489
490	nsresult Rename(const char* inNewName); // not const: gets updated
491	nsresult CopyToDir(const nsFileSpec& inNewParentDirectory) const;
492	nsresult MoveToDir(const nsFileSpec& inNewParentDirectory);
493	nsresult Execute(const char* args) const;
494
495	protected:
496
497	//--------------------------------------------------
498	// Data
499	//--------------------------------------------------
500
501	protected:
502
503	// Clear the nsFileSpec contents, resetting it
504	// to the uninitialized state;
505	void Clear();
506
507	friend class nsFilePath;
508	friend class nsFileURL;
509	friend class nsDirectoryIterator;
510	#if defined(XP_MAC)
511	FSSpec mSpec;
512	#endif
513	nsSimpleCharString mPath;
514	nsresult mError;
515
516	private:
517	NS_EXPLICIT nsFileSpec(const nsPersistentFileDescriptor& inURL);
518
519	}; // class nsFileSpec
520
521	// FOR HISTORICAL REASONS:
522
523	typedef nsFileSpec nsNativeFileSpec;
524
525	//========================================================================================
526	class NS_COM_OBSOLETE nsFileURL
527	// This is an escaped string that looks like "file:///foo/bar/mumble%20fish". Since URLs
528	// are the standard way of doing things in mozilla, this allows a string constructor,
529	// which just stashes the string with no conversion.
530	//========================================================================================
531	{
532	public:
533	nsFileURL(const nsFileURL& inURL);
534	NS_EXPLICIT nsFileURL(const char* inURLString, PRBool inCreateDirs = PR_FALSE);
535	NS_EXPLICIT nsFileURL(const nsString& inURLString, PRBool inCreateDirs = PR_FALSE);
536	NS_EXPLICIT nsFileURL(const nsFilePath& inPath);
537	NS_EXPLICIT nsFileURL(const nsFileSpec& inPath);
538	virtual ~nsFileURL();
539
540	// nsString GetString() const { return mPath; }
541	// may be needed for implementation reasons,
542	// but should not provide a conversion constructor.
543
544	void operator = (const nsFileURL& inURL);
545	void operator = (const char* inURLString);
546	void operator = (const nsString& inURLString)
547	{
548	*this = NS_LossyConvertUCS2toASCII(inURLString).get();
549	}
550	void operator = (const nsFilePath& inOther);
551	void operator = (const nsFileSpec& inOther);
552
553	void operator +=(const char* inRelativeUnixPath);
554	nsFileURL operator +(const char* inRelativeUnixPath) const;
555	operator const char* () const { return (const char*)mURL; } // deprecated.
556	const char* GetURLString() const { return (const char*)mURL; }
557	// Not allocated, so don't free it.
558	const char* GetAsString() const { return (const char*)mURL; }
559	// Not allocated, so don't free it.
560
561	#if defined(XP_MAC)
562	// Accessor to allow quick assignment to a mFileSpec
563	const nsFileSpec& GetFileSpec() const { return mFileSpec; }
564	#endif
565
566	//--------------------------------------------------
567	// Data
568	//--------------------------------------------------
569
570	protected:
571	friend class nsFilePath; // to allow construction of nsFilePath
572	nsSimpleCharString mURL;
573
574	#if defined(XP_MAC)
575	// Since the path on the macintosh does not uniquely specify a file (volumes
576	// can have the same name), stash the secret nsFileSpec, too.
577	nsFileSpec mFileSpec;
578	#endif
579	}; // class nsFileURL
580
581	//========================================================================================
582	class NS_COM_OBSOLETE nsFilePath
583	// This is a string that looks like "/foo/bar/mumble fish". Same as nsFileURL, but
584	// without the "file:// prefix", and NOT %20 ENCODED! Strings passed in must be
585	// valid unix-style paths in this format.
586	//========================================================================================
587	{
588	public:
589	nsFilePath(const nsFilePath& inPath);
590	NS_EXPLICIT nsFilePath(const char* inUnixPathString, PRBool inCreateDirs = PR_FALSE);
591	NS_EXPLICIT nsFilePath(const nsString& inUnixPathString, PRBool inCreateDirs = PR_FALSE);
592	NS_EXPLICIT nsFilePath(const nsFileURL& inURL);
593	NS_EXPLICIT nsFilePath(const nsFileSpec& inPath);
594	virtual ~nsFilePath();
595
596
597	operator const char* () const { return mPath; }
598	// This will return a UNIX string. If you
599	// need a string that can be passed into
600	// NSPR, take a look at the nsNSPRPath class.
601
602	void operator = (const nsFilePath& inPath);
603	void operator = (const char* inUnixPathString);
604	void operator = (const nsString& inUnixPathString)
605	{
606	*this = NS_LossyConvertUCS2toASCII(inUnixPathString).get();
607	}
608	void operator = (const nsFileURL& inURL);
609	void operator = (const nsFileSpec& inOther);
610
611	void operator +=(const char* inRelativeUnixPath);
612	nsFilePath operator +(const char* inRelativeUnixPath) const;
613
614	#if defined(XP_MAC)
615	public:
616	// Accessor to allow quick assignment to a mFileSpec
617	const nsFileSpec& GetFileSpec() const { return mFileSpec; }
618	#endif
619
620	//--------------------------------------------------
621	// Data
622	//--------------------------------------------------
623
624	private:
625
626	nsSimpleCharString mPath;
627	#if defined(XP_MAC)
628	// Since the path on the macintosh does not uniquely specify a file (volumes
629	// can have the same name), stash the secret nsFileSpec, too.
630	nsFileSpec mFileSpec;
631	#endif
632	}; // class nsFilePath
633
634	//========================================================================================
635	class nsPersistentFileDescriptor
636	// To save information about a file's location in another file, initialize
637	// one of these from your nsFileSpec, and then write this out to your output stream.
638	// To retrieve the info, create one of these, read its value from an input stream.
639	// and then make an nsFileSpec from it.
640	//========================================================================================
641	{
642	public:
643	nsPersistentFileDescriptor() {}
644	// For use prior to reading in from a stream
645	nsPersistentFileDescriptor(const nsPersistentFileDescriptor& inEncodedData);
646	virtual ~nsPersistentFileDescriptor();
647	void operator = (const nsPersistentFileDescriptor& inEncodedData);
648
649	// Conversions
650	NS_EXPLICIT nsPersistentFileDescriptor(const nsFileSpec& inSpec);
651	void operator = (const nsFileSpec& inSpec);
652
653	// The following four functions are declared here (as friends). Their implementations
654	// are in mozilla/base/src/nsFileSpecStreaming.cpp.
655
656	friend nsresult Read(nsIInputStream* aStream, nsPersistentFileDescriptor&);
657	friend nsresult Write(nsIOutputStream* aStream, const nsPersistentFileDescriptor&);
658	// writes the data to a file
659	friend NS_COM_OBSOLETE nsInputStream& operator >> (nsInputStream&, nsPersistentFileDescriptor&);
660	// reads the data from a file
661	friend NS_COM_OBSOLETE nsOutputStream& operator << (nsOutputStream&, const nsPersistentFileDescriptor&);
662	// writes the data to a file
663	friend class nsFileSpec;
664
665	void GetData(nsAFlatCString& outData) const;
666	void SetData(const nsAFlatCString& inData);
667	void SetData(const char* inData, PRInt32 inSize);
668
669	//--------------------------------------------------
670	// Data
671	//--------------------------------------------------
672
673	protected:
674
675	nsSimpleCharString mDescriptorString;
676
677	}; // class nsPersistentFileDescriptor
678
679	//========================================================================================
680	class NS_COM_OBSOLETE nsDirectoryIterator
681	// Example:
682	//
683	// nsFileSpec parentDir(...); // directory over whose children we shall iterate
684	// for (nsDirectoryIterator i(parentDir, PR_FALSE); i.Exists(); i++)
685	// {
686	// // do something with i.Spec()
687	// }
688	//
689	// - or -
690	//
691	// for (nsDirectoryIterator i(parentDir, PR_TRUE); i.Exists(); i--)
692	// {
693	// // do something with i.Spec()
694	// }
695	// This one passed the PR_TRUE flag which will resolve any symlink encountered.
696	//========================================================================================
697	{
698	public:
699	nsDirectoryIterator( const nsFileSpec& parent,
700	PRBool resoveSymLinks);
701	#if !defined(XP_MAC)
702	// Macintosh currently doesn't allocate, so needn't clean up.
703	virtual ~nsDirectoryIterator();
704	#endif
705	PRBool Exists() const { return mExists; }
706	nsDirectoryIterator& operator ++(); // moves to the next item, if any.
707	nsDirectoryIterator& operator ++(int) { return ++(*this); } // post-increment.
708	nsDirectoryIterator& operator --(); // moves to the previous item, if any.
709	nsDirectoryIterator& operator --(int) { return --(*this); } // post-decrement.
710	operator nsFileSpec&() { return mCurrent; }
711
712	nsFileSpec& Spec() { return mCurrent; }
713
714	private:
715
716	#if defined(XP_MAC)
717	OSErr SetToIndex();
718	#endif
719
720	//--------------------------------------------------
721	// Data
722	//--------------------------------------------------
723
724	private:
725
726	nsFileSpec mCurrent;
727	PRBool mExists;
728	PRBool mResoveSymLinks;
729
730	#if (defined(XP_UNIX) \|\| defined(XP_BEOS) \|\| defined (XP_WIN) \|\| defined(XP_OS2))
731	nsFileSpec mStarting;
732	#endif
733
734	#if defined(XP_MAC)
735	short mVRefNum;
736	long mParID;
737	short mIndex;
738	short mMaxIndex;
739	#elif defined(XP_UNIX) \|\| defined(XP_BEOS)
740	DIR* mDir;
741	#elif defined(XP_WIN) \|\| defined(XP_OS2)
742	PRDir* mDir; // XXX why not use PRDir for Unix too?
743	#endif
744	}; // class nsDirectoryIterator
745
746	//========================================================================================
747	class NS_COM_OBSOLETE nsNSPRPath
748	// This class will allow you to pass any one of the nsFile* classes directly into NSPR
749	// without the need to worry about whether you have the right kind of filepath or not.
750	// It will also take care of cleaning up any allocated memory.
751	//========================================================================================
752	{
753	public:
754	NS_EXPLICIT nsNSPRPath(const nsFileSpec& inSpec)
755	: mFilePath(inSpec), modifiedNSPRPath(nsnull) {}
756	NS_EXPLICIT nsNSPRPath(const nsFileURL& inURL)
757	: mFilePath(inURL), modifiedNSPRPath(nsnull) {}
758	NS_EXPLICIT nsNSPRPath(const nsFilePath& inUnixPath)
759	: mFilePath(inUnixPath), modifiedNSPRPath(nsnull) {}
760
761	virtual ~nsNSPRPath();
762
763	operator const char*() const;
764	// Returns the path
765	// that NSPR file routines expect on each platform.
766	// Concerning constness, this can modify
767	// modifiedNSPRPath, but it's really just "mutable".
768
769	//--------------------------------------------------
770	// Data
771	//--------------------------------------------------
772
773	private:
774
775	nsFilePath mFilePath;
776	char* modifiedNSPRPath; // Currently used only on XP_WIN,XP_OS2
777	}; // class nsNSPRPath
778
779
780	NS_COM_OBSOLETE nsresult NS_FileSpecToIFile(nsFileSpec* fileSpec, nsILocalFile* *result);
781
782	#endif // _FILESPEC_H_

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/libs/xpcom18a4/xpcom/obsolete/nsFileSpec.h@ 84032

Download in other formats: