Index: trunk/src/VBox/Additions/WINNT/Graphics/Miniport/Helper.cpp
===================================================================
--- trunk/src/VBox/Additions/WINNT/Graphics/Miniport/Helper.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/WINNT/Graphics/Miniport/Helper.cpp	(revision 13837)
@@ -71,5 +71,5 @@
     if (RT_FAILURE(rc))
     {
-        dprintf(("VBoxVideo::vboxQueryDisplayRequest: ERROR allocating request, rc = %Vrc\n", rc));
+        dprintf(("VBoxVideo::vboxQueryDisplayRequest: ERROR allocating request, rc = %Rrc\n", rc));
     }
     else
@@ -94,5 +94,5 @@
         {
             dprintf(("VBoxVideo::vboxQueryDisplayRequest: ERROR querying display request from VMMDev."
-                     "rc = %Vrc, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                     "rc = %Rrc, VMMDev rc = %Rrc\n", rc, req->header.rc));
         }
 
@@ -114,5 +114,5 @@
     if (RT_FAILURE(rc))
     {
-        dprintf(("VBoxVideo::vboxLikesVideoMode: ERROR allocating request, rc = %Vrc\n", rc));
+        dprintf(("VBoxVideo::vboxLikesVideoMode: ERROR allocating request, rc = %Rrc\n", rc));
         /* Most likely the VBoxGuest driver is not loaded.
          * To get at least the video working, report the mode as supported.
@@ -133,5 +133,5 @@
         {
             dprintf(("VBoxVideo::vboxLikesVideoMode: ERROR querying video mode supported status from VMMDev."
-                     "rc = %Vrc, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                     "rc = %Rrc, VMMDev rc = %Rrc\n", rc, req->header.rc));
         }
         VbglGRFree(&req->header);
@@ -153,5 +153,5 @@
     if (RT_FAILURE(rc))
     {
-        dprintf(("VBoxVideo::vboxGetHeightReduction: ERROR allocating request, rc = %Vrc\n", rc));
+        dprintf(("VBoxVideo::vboxGetHeightReduction: ERROR allocating request, rc = %Rrc\n", rc));
     }
     else
@@ -165,5 +165,5 @@
         {
             dprintf(("VBoxVideo::vboxGetHeightReduction: ERROR querying height reduction value from VMMDev."
-                     "rc = %Vrc, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                     "rc = %Rrc, VMMDev rc = %Rrc\n", rc, req->header.rc));
         }
         VbglGRFree(&req->header);
@@ -187,5 +187,5 @@
     if (RT_FAILURE(rc))
     {
-        dprintf(("VBoxVideo::vboxQueryPointerPosInternal: ERROR allocating request, rc = %Vrc\n", rc));
+        dprintf(("VBoxVideo::vboxQueryPointerPosInternal: ERROR allocating request, rc = %Rrc\n", rc));
     }
     else
@@ -213,5 +213,5 @@
         {
             dprintf(("VBoxVideo::vboxQueryPointerPosInternal: ERROR querying mouse capabilities from VMMDev."
-                     "rc = %Vrc, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                     "rc = %Rrc, VMMDev rc = %Rrc\n", rc, req->header.rc));
         }
 
@@ -316,5 +316,5 @@
     if (RT_FAILURE(rc))
     {
-        dprintf(("VBoxVideo::vboxUpdatePointerShape: ERROR allocating request, rc = %Vrc\n", rc));
+        dprintf(("VBoxVideo::vboxUpdatePointerShape: ERROR allocating request, rc = %Rrc\n", rc));
     }
     else
@@ -349,5 +349,5 @@
         {
             dprintf(("VBoxVideo::vboxUpdatePointerShape: ERROR querying mouse capabilities from VMMDev."
-                     "rc = %Vrc, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                     "rc = %Rrc, VMMDev rc = %Rrc\n", rc, req->header.rc));
         }
 
Index: trunk/src/VBox/Additions/WINNT/Graphics/Miniport/VBoxVideo.cpp
===================================================================
--- trunk/src/VBox/Additions/WINNT/Graphics/Miniport/VBoxVideo.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/WINNT/Graphics/Miniport/VBoxVideo.cpp	(revision 13837)
@@ -1728,5 +1728,5 @@
 
             rc = vboxVbvaEnable (pDevExt, ulEnable, (VBVAENABLERESULT *)RequestPacket->OutputBuffer);
-            dprintf(("VBoxVideo::VBoxVideoStartIO: IOCTL_VIDEO_VBVA_ENABLE completed rc = %Vrc\n", rc));
+            dprintf(("VBoxVideo::VBoxVideoStartIO: IOCTL_VIDEO_VBVA_ENABLE completed rc = %Rrc\n", rc));
 
             if (RT_FAILURE (rc))
@@ -2172,5 +2172,5 @@
             if (RT_FAILURE(rc) || RT_FAILURE(req->header.rc))
             {
-                dprintf(("VBoxVideo::vbvaFlush: rc = %Vrc, VMMDev rc = %Vrc!!!\n", rc, req->header.rc));
+                dprintf(("VBoxVideo::vbvaFlush: rc = %Rrc, VMMDev rc = %Rrc!!!\n", rc, req->header.rc));
             }
         }
@@ -2234,5 +2234,5 @@
             else
             {
-                dprintf(("VBoxVideo::vboxVbvaEnable: VbglGRAlloc (VMMDevReq_VideoAccelFlush) rc = %Vrc!!!\n", rc));
+                dprintf(("VBoxVideo::vboxVbvaEnable: VbglGRAlloc (VMMDevReq_VideoAccelFlush) rc = %Rrc!!!\n", rc));
             }
         }
@@ -2240,5 +2240,5 @@
     else
     {
-        dprintf(("VBoxVideo::vboxVbvaEnable: VbglQueryVMMDevMemory rc = %Vrc!!!\n", rc));
+        dprintf(("VBoxVideo::vboxVbvaEnable: VbglQueryVMMDevMemory rc = %Rrc!!!\n", rc));
     }
 
@@ -2301,5 +2301,5 @@
             else
             {
-                dprintf(("VBoxVideo::vboxVbvaEnable: rc = %Vrc, VMMDev rc = %Vrc!!!\n", rc, req->header.rc));
+                dprintf(("VBoxVideo::vboxVbvaEnable: rc = %Rrc, VMMDev rc = %Rrc!!!\n", rc, req->header.rc));
 
                 if (RT_SUCCESS(rc))
@@ -2313,5 +2313,5 @@
         else
         {
-            dprintf(("VBoxVideo::vboxVbvaEnable: VbglGRAlloc rc = %Vrc!!!\n", rc));
+            dprintf(("VBoxVideo::vboxVbvaEnable: VbglGRAlloc rc = %Rrc!!!\n", rc));
         }
 
Index: trunk/src/VBox/Additions/WINNT/MouseFilter/VBoxMouse.cpp
===================================================================
--- trunk/src/VBox/Additions/WINNT/MouseFilter/VBoxMouse.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/WINNT/MouseFilter/VBoxMouse.cpp	(revision 13837)
@@ -204,5 +204,5 @@
                 {
                     dprintf(("VBoxMouse::vboxDeviceRemoved: ERROR communicating new mouse capabilities to VMMDev.\n"
-                             "rc = %d, VMMDev rc = %Vrc\n", vboxRC, req->header.rc));
+                             "rc = %d, VMMDev rc = %Rrc\n", vboxRC, req->header.rc));
                 }
 
@@ -249,5 +249,5 @@
                 {
                     dprintf(("VBoxMouse::vboxInformHost: ERROR communicating new mouse capabilities to VMMDev."
-                              "rc = %d, VMMDev rc = %Vrc\n", vboxRC, req->header.rc));
+                              "rc = %d, VMMDev rc = %Rrc\n", vboxRC, req->header.rc));
                 }
                 else
@@ -1028,5 +1028,5 @@
         {
             dprintf(("VBoxMouse::VBoxMouse_ServiceCallback: ERROR querying mouse capabilities from VMMDev."
-                     "rc = %Vrc, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                     "rc = %Rrc, VMMDev rc = %Rrc\n", rc, req->header.rc));
         }
     }
Index: trunk/src/VBox/Additions/WINNT/VBoxGINA/Helper.cpp
===================================================================
--- trunk/src/VBox/Additions/WINNT/VBoxGINA/Helper.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/WINNT/VBoxGINA/Helper.cpp	(revision 13837)
@@ -176,5 +176,5 @@
     if (RT_FAILURE(rc))
     {
-        Log(("VBoxGINA::credentialsPollerCreate: failed to create thread, rc = %Vrc\n", rc));
+        Log(("VBoxGINA::credentialsPollerCreate: failed to create thread, rc = %Rrc\n", rc));
         return false;
     }
@@ -198,12 +198,12 @@
         /* wait until the thread has terminated */
         rc = RTThreadWait(gThreadPoller, RT_INDEFINITE_WAIT, NULL);
-        Log(("VBoxGINA::credentialsPollerTermiante: thread has (probably) terminated (rc = %Vrc)\n", rc));
+        Log(("VBoxGINA::credentialsPollerTermiante: thread has (probably) terminated (rc = %Rrc)\n", rc));
     }
     else
     {
         /* failed to signal the thread - very unlikely - so no point in waiting long. */
-        Log(("VBoxGINA::credentialsPollerTermiante: failed to signal semaphore, rc = %Vrc\n", rc));
+        Log(("VBoxGINA::credentialsPollerTermiante: failed to signal semaphore, rc = %Rrc\n", rc));
         rc = RTThreadWait(gThreadPoller, 100, NULL);
-        Log(("VBoxGINA::credentialsPollerTermiante: thread has terminated? wait rc = %Vrc\n", rc));
+        Log(("VBoxGINA::credentialsPollerTermiante: thread has terminated? wait rc = %Rrc\n", rc));
     }
     /* now cleanup */
Index: trunk/src/VBox/Additions/WINNT/VBoxGuest/Helper.cpp
===================================================================
--- trunk/src/VBox/Additions/WINNT/VBoxGuest/Helper.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/WINNT/VBoxGuest/Helper.cpp	(revision 13837)
@@ -235,5 +235,5 @@
         {
             dprintf(("VBoxGuest::hlpVBoxReportGuestInfo: error reporting guest info to VMMDev."
-                      "rc = %d, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                      "rc = %d, VMMDev rc = %Rrc\n", rc, req->header.rc));
         }
 
Index: trunk/src/VBox/Additions/WINNT/VBoxGuest/VBoxGuest.cpp
===================================================================
--- trunk/src/VBox/Additions/WINNT/VBoxGuest/VBoxGuest.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/WINNT/VBoxGuest/VBoxGuest.cpp	(revision 13837)
@@ -422,5 +422,5 @@
         {
             dprintf (("VBoxGuest::VBoxGuestDeviceControl: error issuing request to VMMDev! "
-                      "rc = %d, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                      "rc = %d, VMMDev rc = %Rrc\n", rc, req->header.rc));
         }
         else
@@ -528,5 +528,5 @@
             {
                 dprintf(("VBoxGuest::VBoxGuestSetBalloonSize: error issuing request to VMMDev!"
-                         "rc = %d, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                         "rc = %d, VMMDev rc = %Rrc\n", rc, req->header.rc));
 
 #ifndef TARGET_NT4
@@ -579,5 +579,5 @@
                 if (RT_FAILURE(rc) || RT_FAILURE(req->header.rc))
                 {
-                    AssertMsgFailed(("VBoxGuest::VBoxGuestSetBalloonSize: error issuing request to VMMDev! rc = %d, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                    AssertMsgFailed(("VBoxGuest::VBoxGuestSetBalloonSize: error issuing request to VMMDev! rc = %d, VMMDev rc = %Rrc\n", rc, req->header.rc));
                     break;
                 }
@@ -625,5 +625,5 @@
         {
             dprintf(("VBoxGuest::VBoxGuestDeviceControl VBOXGUEST_IOCTL_CTL_CHECK_BALLOON: error issuing request to VMMDev!"
-                     "rc = %d, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                     "rc = %d, VMMDev rc = %Rrc\n", rc, req->header.rc));
         }
         else
@@ -842,5 +842,5 @@
                 {
                     dprintf(("VBoxGuest::VBoxGuestDeviceControl VBOXGUEST_IOCTL_VMMREQUEST: Error issuing request to VMMDev! "
-                             "rc = %d, VMMDev rc = %Vrc\n", rc, req->rc));
+                             "rc = %d, VMMDev rc = %Rrc\n", rc, req->rc));
                     Status = STATUS_UNSUCCESSFUL;
                 }
@@ -922,5 +922,5 @@
             if (RT_FAILURE(rc))
             {
-                dprintf(("VBOXGUEST_IOCTL_HGCM_CONNECT: vbox rc = %Vrc\n", rc));
+                dprintf(("VBOXGUEST_IOCTL_HGCM_CONNECT: vbox rc = %Rrc\n", rc));
                 Status = STATUS_UNSUCCESSFUL;
             }
@@ -963,5 +963,5 @@
             if (RT_FAILURE(rc))
             {
-                dprintf(("VBOXGUEST_IOCTL_HGCM_DISCONNECT: vbox rc = %Vrc\n", rc));
+                dprintf(("VBOXGUEST_IOCTL_HGCM_DISCONNECT: vbox rc = %Rrc\n", rc));
                 Status = STATUS_UNSUCCESSFUL;
             }
@@ -992,5 +992,5 @@
             if (RT_FAILURE(rc))
             {
-                dprintf(("VBOXGUEST_IOCTL_HGCM_CALL: vbox rc = %Vrc\n", rc));
+                dprintf(("VBOXGUEST_IOCTL_HGCM_CALL: vbox rc = %Rrc\n", rc));
                 Status = STATUS_UNSUCCESSFUL;
             }
@@ -1051,5 +1051,5 @@
             if (RT_FAILURE(rc))
             {
-                dprintf(("VBOXGUEST_IOCTL_CTL_CHECK_BALLOON: vbox rc = %Vrc\n", rc));
+                dprintf(("VBOXGUEST_IOCTL_CTL_CHECK_BALLOON: vbox rc = %Rrc\n", rc));
                 Status = STATUS_UNSUCCESSFUL;
             }
@@ -1132,5 +1132,5 @@
         {
             dprintf(("VBoxGuest::PowerStateRequest: error performing request to VMMDev."
-                      "rc = %d, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                      "rc = %d, VMMDev rc = %Rrc\n", rc, req->header.rc));
         }
     }
@@ -1307,5 +1307,5 @@
             {
                 dprintf(("VBoxGuest::PowerStateRequest: error performing request to VMMDev."
-                          "rc = %d, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                          "rc = %d, VMMDev rc = %Rrc\n", rc, req->header.rc));
             }
         }
@@ -1483,10 +1483,10 @@
             {
                 dprintf(("VBoxGuest::reserveHypervisorMemory: error communicating physical address to VMMDev!"
-                         "rc = %d, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                         "rc = %d, VMMDev rc = %Rrc\n", rc, req->header.rc));
             }
         }
         else
         {
-            dprintf(("VBoxGuest::reserveHypervisorMemory: request failed with rc %d, VMMDev rc = %Vrc\n", rc, req->header.rc));
+            dprintf(("VBoxGuest::reserveHypervisorMemory: request failed with rc %d, VMMDev rc = %Rrc\n", rc, req->header.rc));
         }
         VbglGRFree (&req->header);
@@ -1519,5 +1519,5 @@
         {
             dprintf(("VBoxGuest::unreserveHypervisorMemory: error communicating physical address to VMMDev!"
-                     "rc = %d, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                     "rc = %d, VMMDev rc = %Rrc\n", rc, req->header.rc));
         }
 
@@ -1560,5 +1560,5 @@
     if (RT_FAILURE(rc))
     {
-        dprintf(("VBoxGuest::vboxIdleThread: error %Vrc allocating request structure!\n"));
+        dprintf(("VBoxGuest::vboxIdleThread: error %Rrc allocating request structure!\n"));
         return;
     }
Index: trunk/src/VBox/Additions/WINNT/VBoxGuest/VBoxGuestPnP.cpp
===================================================================
--- trunk/src/VBox/Additions/WINNT/VBoxGuest/VBoxGuestPnP.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/WINNT/VBoxGuest/VBoxGuestPnP.cpp	(revision 13837)
@@ -556,5 +556,5 @@
                                 {
                                     dprintf(("VBoxGuest::PowerStateRequest: error communicating new power status to VMMDev."
-                                             "rc = %d, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                                             "rc = %d, VMMDev rc = %Rrc\n", rc, req->header.rc));
                                 }
 
@@ -584,5 +584,5 @@
                                     {
                                         dprintf(("VBoxGuest::PowerStateRequest: error communicating new power status to VMMDev."
-                                                 "rc = %d, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                                                 "rc = %d, VMMDev rc = %Rrc\n", rc, req->header.rc));
                                     }
                                 }
Index: trunk/src/VBox/Additions/WINNT/VBoxService/VBoxService.cpp
===================================================================
--- trunk/src/VBox/Additions/WINNT/VBoxService/VBoxService.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/WINNT/VBoxService/VBoxService.cpp	(revision 13837)
@@ -174,5 +174,5 @@
         if (RT_FAILURE (rc))
         {
-            writeLog("VBoxService: Failed to initialize! Error = %Vrc.\n", rc);
+            writeLog("VBoxService: Failed to initialize! Error = %Rrc.\n", rc);
         }
         else
Index: trunk/src/VBox/Additions/WINNT/VBoxTray/VBoxTray.cpp
===================================================================
--- trunk/src/VBox/Additions/WINNT/VBoxTray/VBoxTray.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/WINNT/VBoxTray/VBoxTray.cpp	(revision 13837)
@@ -133,5 +133,5 @@
         if (RT_FAILURE (rc))
         {
-            Log(("Failed to initialize rc = %Vrc.\n", rc));
+            Log(("Failed to initialize rc = %Rrc.\n", rc));
         }
         else
Index: trunk/src/VBox/Additions/WINNT/i8042prt/i8042dep.c
===================================================================
--- trunk/src/VBox/Additions/WINNT/i8042prt/i8042dep.c	(revision 13836)
+++ trunk/src/VBox/Additions/WINNT/i8042prt/i8042dep.c	(revision 13837)
@@ -1340,5 +1340,5 @@
     if (RT_FAILURE(vboxRC))
     {
-        dprintf(("i8042prt::DriverEntry: could not initialize guest library, rc = %Vrc\n", vboxRC));
+        dprintf(("i8042prt::DriverEntry: could not initialize guest library, rc = %Rrc\n", vboxRC));
         /* Continue working in non-VBox mode. */
     }
@@ -1361,5 +1361,5 @@
             {
                 dprintf(("i8042prt::DriverEntry: ERROR communicating new mouse capabilities to VMMDev."
-                         "rc = %d, VMMDev rc = %Vrc\n", vboxRC, req->header.rc));
+                         "rc = %d, VMMDev rc = %Rrc\n", vboxRC, req->header.rc));
             }
             else
@@ -1374,5 +1374,5 @@
             VbglTerminate ();
 
-            dprintf(("i8042prt::DriverEntry: could not allocate request buffer, rc = %Vrc\n", vboxRC));
+            dprintf(("i8042prt::DriverEntry: could not allocate request buffer, rc = %Rrc\n", vboxRC));
             /* Continue working in non-VBox mode. */
         }
Index: trunk/src/VBox/Additions/WINNT/i8042prt/moudep.c
===================================================================
--- trunk/src/VBox/Additions/WINNT/i8042prt/moudep.c	(revision 13836)
+++ trunk/src/VBox/Additions/WINNT/i8042prt/moudep.c	(revision 13837)
@@ -554,5 +554,5 @@
                     {
                         dprintf(("i8042prt: ERROR querying mouse capabilities from VMMDev."
-                                 "rc = %Vrc, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                                 "rc = %Rrc, VMMDev rc = %Rrc\n", rc, req->header.rc));
                     }
                 }
@@ -620,5 +620,5 @@
                     {
                         dprintf(("i8042prt: ERROR querying mouse capabilities from VMMDev."
-                                 "rc = %Vrc, VMMDev rc = %Vrc\n", rc, req->header.rc));
+                                 "rc = %Rrc, VMMDev rc = %Rrc\n", rc, req->header.rc));
                     }
                 }
Index: trunk/src/VBox/Additions/common/VBoxGuest/VBoxGuest-os2.cpp
===================================================================
--- trunk/src/VBox/Additions/common/VBoxGuest/VBoxGuest-os2.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/common/VBoxGuest/VBoxGuest-os2.cpp	(revision 13837)
@@ -200,13 +200,13 @@
                     }
 
-                    g_cchInitText = RTStrPrintf(&g_szInitText[0], g_cchInitTextMax, "VBoxGuest.sys: SetIrq failed for IRQ %#d, rc=%Vrc\n",
+                    g_cchInitText = RTStrPrintf(&g_szInitText[0], g_cchInitTextMax, "VBoxGuest.sys: SetIrq failed for IRQ %#d, rc=%Rrc\n",
                                                 g_bInterruptLine, rc);
                 }
                 else
-                    g_cchInitText = RTStrPrintf(&g_szInitText[0], g_cchInitTextMax, "VBoxGuest.sys: RTSpinlockCreate failed, rc=%Vrc\n", rc);
+                    g_cchInitText = RTStrPrintf(&g_szInitText[0], g_cchInitTextMax, "VBoxGuest.sys: RTSpinlockCreate failed, rc=%Rrc\n", rc);
                 VBoxGuestDeleteDevExt(&g_DevExt);
             }
             else
-                g_cchInitText = RTStrPrintf(&g_szInitText[0], g_cchInitTextMax, "VBoxGuest.sys: VBoxGuestOS2InitDevExt failed, rc=%Vrc\n", rc);
+                g_cchInitText = RTStrPrintf(&g_szInitText[0], g_cchInitTextMax, "VBoxGuest.sys: VBoxGuestOS2InitDevExt failed, rc=%Rrc\n", rc);
 
             int rc2 = RTR0MemObjFree(g_MemObjMMIO, true /* fFreeMappings */); AssertRC(rc2);
@@ -214,11 +214,11 @@
         }
         else
-            g_cchInitText = RTStrPrintf(&g_szInitText[0], g_cchInitTextMax, "VBoxGuest.sys: VBoxGuestOS2MapMMIO failed, rc=%Vrc\n", rc);
+            g_cchInitText = RTStrPrintf(&g_szInitText[0], g_cchInitTextMax, "VBoxGuest.sys: VBoxGuestOS2MapMMIO failed, rc=%Rrc\n", rc);
         RTR0Term();
     }
     else
-        g_cchInitText = RTStrPrintf(&g_szInitText[0], g_cchInitTextMax, "VBoxGuest.sys: RTR0Init failed, rc=%Vrc\n", rc);
-
-    RTLogBackdoorPrintf("VBoxGuestOS2Init: failed rc=%Vrc - %s", rc, &g_szInitText[0]);
+        g_cchInitText = RTStrPrintf(&g_szInitText[0], g_cchInitTextMax, "VBoxGuest.sys: RTR0Init failed, rc=%Rrc\n", rc);
+
+    RTLogBackdoorPrintf("VBoxGuestOS2Init: failed rc=%Rrc - %s", rc, &g_szInitText[0]);
     return rc;
 }
Index: trunk/src/VBox/Additions/common/VBoxGuestLib/HGCM.cpp
===================================================================
--- trunk/src/VBox/Additions/common/VBoxGuestLib/HGCM.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/common/VBoxGuestLib/HGCM.cpp	(revision 13837)
@@ -56,5 +56,5 @@
 
     VBGL_HGCM_ASSERTMsg(RT_SUCCESS(rc),
-                        ("Failed to request handle heap mutex, rc = %Vrc\n", rc));
+                        ("Failed to request handle heap mutex, rc = %Rrc\n", rc));
 
     return rc;
Index: trunk/src/VBox/Additions/common/VBoxGuestLib/HGCMInternal.cpp
===================================================================
--- trunk/src/VBox/Additions/common/VBoxGuestLib/HGCMInternal.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/common/VBoxGuestLib/HGCMInternal.cpp	(revision 13837)
@@ -149,5 +149,5 @@
 
     /* Anyone who needs this can re-enable it locally */
-    /* dprintf (("VbglHGCMCall Allocated gr %p, rc = %Vrc, cbParms = %d\n", pHGCMCall, rc, cbParms)); */
+    /* dprintf (("VbglHGCMCall Allocated gr %p, rc = %Rrc, cbParms = %d\n", pHGCMCall, rc, cbParms)); */
 
     if (RT_SUCCESS(rc))
@@ -216,5 +216,5 @@
 
             /* Anyone who needs this can re-enable it locally */
-            /* dprintf (("VbglGRPerform rc = %Vrc (header rc=%d)\n", rc, pHGCMCall->header.result)); */
+            /* dprintf (("VbglGRPerform rc = %Rrc (header rc=%d)\n", rc, pHGCMCall->header.result)); */
 
             /** If the call failed, but as a result of the request itself, then pretend success
Index: trunk/src/VBox/Additions/common/VBoxGuestLib/PhysHeap.cpp
===================================================================
--- trunk/src/VBox/Additions/common/VBoxGuestLib/PhysHeap.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/common/VBoxGuestLib/PhysHeap.cpp	(revision 13837)
@@ -176,5 +176,5 @@
 
     VBGL_PH_ASSERTMsg(RT_SUCCESS(rc),
-                     ("Failed to request heap mutex, rc = %Vrc\n", rc));
+                     ("Failed to request heap mutex, rc = %Rrc\n", rc));
 
     return rc;
Index: trunk/src/VBox/Additions/linux/module/vboxmod.c
===================================================================
--- trunk/src/VBox/Additions/linux/module/vboxmod.c	(revision 13836)
+++ trunk/src/VBox/Additions/linux/module/vboxmod.c	(revision 13837)
@@ -296,5 +296,5 @@
         rcVBox = vboxadd_cmc_call(vboxDev, VBOXGUEST_IOCTL_HGCM_CONNECT, &info);
         if (RT_FAILURE(rcVBox) || (RT_FAILURE(info.result))) {
-                LogRelFunc(("VBOXGUEST_IOCTL_HGCM_CONNECT: hgcm connection failed.  internal ioctl result %Vrc, hgcm result %Vrc\n", rcVBox, info.result));
+                LogRelFunc(("VBOXGUEST_IOCTL_HGCM_CONNECT: hgcm connection failed.  internal ioctl result %Rrc, hgcm result %Rrc\n", rcVBox, info.result));
                 rc = RT_FAILURE(rcVBox) ?   -RTErrConvertToErrno(rcVBox)
                                           : -RTErrConvertToErrno(info.result);
@@ -691,5 +691,5 @@
         {
             /* impossible... */
-            LogRelFunc(("IRQ was not acknowledged! rc = %Vrc, header.rc = %Vrc\n",
+            LogRelFunc(("IRQ was not acknowledged! rc = %Rrc, header.rc = %Rrc\n",
                         rcVBox, vboxDev->irqAckRequest->header.rc));
             BUG ();
@@ -731,5 +731,5 @@
     if (RT_FAILURE(rcVBox))
     {
-        LogRelFunc(("failed to allocate hypervisor info structure! rc = %Vrc\n", rcVBox));
+        LogRelFunc(("failed to allocate hypervisor info structure! rc = %Rrc\n", rcVBox));
         goto bail_out;
     }
@@ -763,5 +763,5 @@
                 else
                 {
-                    LogRelFunc(("failed to set hypervisor region! rc = %Vrc, header.rc = %Vrc\n",
+                    LogRelFunc(("failed to set hypervisor region! rc = %Rrc, header.rc = %Rrc\n",
                                 rcVBox, req->header.rc));
                     goto bail_out;
@@ -777,5 +777,5 @@
     else
     {
-        LogRelFunc(("failed to query hypervisor info! rc = %Vrc, header.rc = %Vrc\n",
+        LogRelFunc(("failed to query hypervisor info! rc = %Rrc, header.rc = %Rrc\n",
                     rcVBox, req->header.rc));
         goto bail_out;
@@ -808,5 +808,5 @@
     if (RT_FAILURE(rcVBox))
     {
-        LogRelFunc(("failed to allocate hypervisor info structure! rc = %Vrc\n", rcVBox));
+        LogRelFunc(("failed to allocate hypervisor info structure! rc = %Rrc\n", rcVBox));
         goto bail_out;
     }
@@ -823,5 +823,5 @@
     else
     {
-        LogRelFunc(("failed to reset hypervisor info! rc = %Vrc, header.rc = %Vrc\n",
+        LogRelFunc(("failed to reset hypervisor info! rc = %Rrc, header.rc = %Rrc\n",
                     rcVBox, req->header.rc));
         goto bail_out;
@@ -996,5 +996,5 @@
     if (RT_FAILURE(rcVBox))
     {
-        LogRelFunc(("could not initialize VBGL subsystem! rc = %Vrc\n", rcVBox));
+        LogRelFunc(("could not initialize VBGL subsystem! rc = %Rrc\n", rcVBox));
         err = -ENXIO;
         goto fail;
@@ -1006,5 +1006,5 @@
     if (RT_FAILURE(rcVBox))
     {
-        LogRelFunc(("could not allocate request structure! rc = %Vrc\n", rcVBox));
+        LogRelFunc(("could not allocate request structure! rc = %Rrc\n", rcVBox));
         err = -ENOMEM;
         goto fail;
@@ -1021,5 +1021,5 @@
     if (RT_FAILURE(rcVBox) || RT_FAILURE(infoReq->header.rc))
     {
-        LogRelFunc(("error reporting guest info to host! rc = %Vrc, header.rc = %Vrc\n",
+        LogRelFunc(("error reporting guest info to host! rc = %Rrc, header.rc = %Rrc\n",
                     rcVBox, infoReq->header.rc));
         VbglGRFree(&infoReq->header);
@@ -1041,5 +1041,5 @@
         if (RT_FAILURE(rcVBox))
         {
-            LogRelFunc(("could not allocate request structure! rc = %Vrc\n", rcVBox));
+            LogRelFunc(("could not allocate request structure! rc = %Rrc\n", rcVBox));
             err = -ENOMEM;
             goto fail;
@@ -1067,5 +1067,5 @@
     if (RT_FAILURE(rcVBox))
     {
-        LogRelFunc(("could not allocate request structure! rc = %Vrc\n", rcVBox));
+        LogRelFunc(("could not allocate request structure! rc = %Rrc\n", rcVBox));
         err = -ENOMEM;
         goto fail;
Index: trunk/src/VBox/Additions/linux/sharedfolders/dirops.c
===================================================================
--- trunk/src/VBox/Additions/linux/sharedfolders/dirops.c	(revision 13836)
+++ trunk/src/VBox/Additions/linux/sharedfolders/dirops.c	(revision 13837)
@@ -62,5 +62,5 @@
         rc = vboxCallCreate (&client_handle, &sf_g->map, sf_i->path, &params);
         if (RT_FAILURE (rc)) {
-                LogFunc(("vboxCallCreate(%s) failed rc=%Vrc\n",
+                LogFunc(("vboxCallCreate(%s) failed rc=%Rrc\n",
                          sf_i->path->String.utf8, rc));
                 sf_dir_info_free (sf_d);
@@ -78,5 +78,5 @@
                 rc = vboxCallClose (&client_handle, &sf_g->map, params.Handle);
                 if (RT_FAILURE (rc)) {
-                        LogFunc(("vboxCallClose(%s) after err=%d failed rc=%Vrc\n",
+                        LogFunc(("vboxCallClose(%s) after err=%d failed rc=%Rrc\n",
                                  sf_i->path->String.utf8, err, rc));
                 }
@@ -88,5 +88,5 @@
         rc = vboxCallClose (&client_handle, &sf_g->map, params.Handle);
         if (RT_FAILURE (rc)) {
-                LogFunc(("vboxCallClose(%s) failed rc=%Vrc\n",
+                LogFunc(("vboxCallClose(%s) failed rc=%Rrc\n",
                           sf_i->path->String.utf8, rc));
         }
@@ -437,5 +437,5 @@
                 }
                 err = -EPROTO;
-                LogFunc(("(%d): vboxCallCreate(%s) failed rc=%Vrc\n", dirop,
+                LogFunc(("(%d): vboxCallCreate(%s) failed rc=%Rrc\n", dirop,
                          sf_i->path->String.utf8, rc));
                 goto fail0;
@@ -458,5 +458,5 @@
         rc = vboxCallClose (&client_handle, &sf_g->map, params.Handle);
         if (RT_FAILURE (rc)) {
-                LogFunc(("(%d): vboxCallClose failed rc=%Vrc\n", dirop, rc));
+                LogFunc(("(%d): vboxCallClose failed rc=%Rrc\n", dirop, rc));
         }
 
@@ -467,5 +467,5 @@
         rc = vboxCallClose (&client_handle, &sf_g->map, params.Handle);
         if (RT_FAILURE (rc)) {
-                LogFunc(("(%d): vboxCallClose failed rc=%Vrc\n", dirop, rc));
+                LogFunc(("(%d): vboxCallClose failed rc=%Rrc\n", dirop, rc));
         }
 
@@ -512,5 +512,5 @@
                              dirop ? SHFL_REMOVE_DIR : SHFL_REMOVE_FILE);
         if (RT_FAILURE (rc)) {
-                LogFunc(("(%d): vboxCallRemove(%s) failed rc=%Vrc\n", dirop,
+                LogFunc(("(%d): vboxCallRemove(%s) failed rc=%Rrc\n", dirop,
                          path->String.utf8, rc));
                          err = -RTErrConvertToErrno (rc);
@@ -583,5 +583,5 @@
                                 sf_file_i->path = new_path;
                         } else {
-                                LogFunc(("vboxCallRename failed rc=%Vrc\n", rc));
+                                LogFunc(("vboxCallRename failed rc=%Rrc\n", rc));
                                 err = -RTErrConvertToErrno (rc);
                         }
Index: trunk/src/VBox/Additions/linux/sharedfolders/regops.c
===================================================================
--- trunk/src/VBox/Additions/linux/sharedfolders/regops.c	(revision 13836)
+++ trunk/src/VBox/Additions/linux/sharedfolders/regops.c	(revision 13837)
@@ -38,5 +38,5 @@
                                pos, nread, buf, false /* already locked? */);
         if (RT_FAILURE (rc)) {
-                LogFunc(("vboxCallRead failed.  caller=%s, rc=%Vrc\n",
+                LogFunc(("vboxCallRead failed.  caller=%s, rc=%Rrc\n",
                          caller, rc));
                 return -EPROTO;
@@ -166,5 +166,5 @@
                 if (RT_FAILURE (rc)) {
                         err = -EPROTO;
-                        LogFunc(("vboxCallWrite(%s) failed rc=%Vrc\n",
+                        LogFunc(("vboxCallWrite(%s) failed rc=%Rrc\n",
                                  sf_i->path->String.utf8, rc));
                         goto fail;
@@ -269,5 +269,5 @@
 
         if (RT_FAILURE (rc)) {
-                LogFunc(("vboxCallCreate failed flags=%d,%#x rc=%Vrc\n",
+                LogFunc(("vboxCallCreate failed flags=%d,%#x rc=%Rrc\n",
                          file->f_flags, params.CreateFlags, rc));
                 kfree (sf_r);
@@ -311,5 +311,5 @@
         rc = vboxCallClose (&client_handle, &sf_g->map, sf_r->handle);
         if (RT_FAILURE (rc)) {
-                LogFunc(("vboxCallClose failed rc=%Vrc\n", rc));
+                LogFunc(("vboxCallClose failed rc=%Rrc\n", rc));
         }
 
Index: trunk/src/VBox/Additions/linux/sharedfolders/utils.c
===================================================================
--- trunk/src/VBox/Additions/linux/sharedfolders/utils.c	(revision 13836)
+++ trunk/src/VBox/Additions/linux/sharedfolders/utils.c	(revision 13837)
@@ -158,5 +158,5 @@
         rc = vboxCallCreate (&client_handle, &sf_g->map, path, &params);
         if (RT_FAILURE (rc)) {
-                LogFunc(("vboxCallCreate(%s) failed.  caller=%s, rc=%Vrc\n",
+                LogFunc(("vboxCallCreate(%s) failed.  caller=%s, rc=%Rrc\n",
                          path->String.utf8, rc, caller));
                 return -EPROTO;
@@ -611,5 +611,5 @@
                         default:
                                 err = -RTErrConvertToErrno (rc);
-                                LogFunc(("vboxCallDirInfo failed rc=%Vrc\n", rc));
+                                LogFunc(("vboxCallDirInfo failed rc=%Rrc\n", rc));
                                 goto fail1;
                 }
Index: trunk/src/VBox/Additions/solaris/SharedFolders/vboxvfs_utils.c
===================================================================
--- trunk/src/VBox/Additions/solaris/SharedFolders/vboxvfs_utils.c	(revision 13836)
+++ trunk/src/VBox/Additions/solaris/SharedFolders/vboxvfs_utils.c	(revision 13837)
@@ -77,5 +77,5 @@
     if (RT_FAILURE(rc))
     {
-        Log((DEVICE_NAME ":vboxCallCreate failed! caller=%s rc=%Vrc\n", pszCaller, rc));
+        Log((DEVICE_NAME ":vboxCallCreate failed! caller=%s rc=%Rrc\n", pszCaller, rc));
         return EPROTO;
     }
Index: trunk/src/VBox/Additions/x11/xclient/clipboard.cpp
===================================================================
--- trunk/src/VBox/Additions/x11/xclient/clipboard.cpp	(revision 13836)
+++ trunk/src/VBox/Additions/x11/xclient/clipboard.cpp	(revision 13837)
@@ -167,5 +167,5 @@
     LogFlowFunc(("u32Format=%d, pv=%p, cb=%d\n", u32Format, pv, cb));
     rc = VbglR3ClipboardWriteData(g_ctx.client, u32Format, pv, cb);
-    LogFlowFunc(("rc=%Vrc\n", rc));
+    LogFlowFunc(("rc=%Rrc\n", rc));
     return rc;
 }
@@ -573,5 +573,5 @@
     LogFlowFunc(("u32Formats=%d\n", u32Formats));
     rc = VbglR3ClipboardReportFormats(g_ctx.client, u32Formats);
-    LogFlowFunc(("rc=%Vrc\n", rc));
+    LogFlowFunc(("rc=%Rrc\n", rc));
     return rc;
 }
@@ -882,5 +882,5 @@
     if ((rc != VINF_SUCCESS) || cbHostText == 0)
     {
-        LogFlow(("vboxClipboardConvertUtf16: vboxClipboardReadHostData returned %Vrc, %d bytes of data\n", rc, cbHostText));
+        LogFlow(("vboxClipboardConvertUtf16: vboxClipboardReadHostData returned %Rrc, %d bytes of data\n", rc, cbHostText));
         g_ctx.hostFormats = 0;
         LogFlowFunc(("rc = false\n"));
@@ -899,5 +899,5 @@
     if (rc != VINF_SUCCESS)
     {
-        LogFlow(("vboxClipboardConvertUtf16: vboxClipboardUtf16WinToLin returned %Vrc\n", rc));
+        LogFlow(("vboxClipboardConvertUtf16: vboxClipboardUtf16WinToLin returned %Rrc\n", rc));
         RTMemFree(reinterpret_cast<void *>(pu16HostText));
         XtFree(reinterpret_cast<char *>(pu16GuestText));
@@ -943,5 +943,5 @@
     if ((rc != VINF_SUCCESS) || cbHostText == 0)
     {
-        LogFlow(("vboxClipboardConvertUtf16: vboxClipboardReadHostData returned %Vrc, %d bytes of data\n", rc, cbHostText));
+        LogFlow(("vboxClipboardConvertUtf16: vboxClipboardReadHostData returned %Rrc, %d bytes of data\n", rc, cbHostText));
         g_ctx.hostFormats = 0;
         LogFlowFunc(("rc = false\n"));
@@ -962,5 +962,5 @@
     if (rc != VINF_SUCCESS)
     {
-        LogFlow(("vboxClipboardConvertUtf16: vboxClipboardUtf16WinToLin returned %Vrc\n", rc));
+        LogFlow(("vboxClipboardConvertUtf16: vboxClipboardUtf16WinToLin returned %Rrc\n", rc));
         RTMemFree(reinterpret_cast<char *>(pu16GuestText));
         LogFlowFunc(("rc = false\n"));
@@ -1022,5 +1022,5 @@
     if ((rc != VINF_SUCCESS) || cbHostText == 0)
     {
-        LogFlow(("vboxClipboardConvertCText: vboxClipboardReadHostData returned %Vrc, %d bytes of data\n", rc, cbHostText));
+        LogFlow(("vboxClipboardConvertCText: vboxClipboardReadHostData returned %Rrc, %d bytes of data\n", rc, cbHostText));
         g_ctx.hostFormats = 0;
         LogFlowFunc(("rc = false\n"));
@@ -1042,5 +1042,5 @@
     if (rc != VINF_SUCCESS)
     {
-        LogFlow(("vboxClipboardConvertUtf16: vboxClipboardUtf16WinToLin returned %Vrc\n", rc));
+        LogFlow(("vboxClipboardConvertUtf16: vboxClipboardUtf16WinToLin returned %Rrc\n", rc));
         RTMemFree(reinterpret_cast<char *>(pu16GuestText));
         LogFlowFunc(("rc = false\n"));
@@ -1062,5 +1062,5 @@
     if (rc != VINF_SUCCESS)
     {
-        Log(("vboxClipboardConvertCText: RTUtf16ToUtf8Ex failed: rc=%Vrc\n", rc));
+        Log(("vboxClipboardConvertCText: RTUtf16ToUtf8Ex failed: rc=%Rrc\n", rc));
         XtFree(pcUtf8Text);
         LogFlowFunc(("rc = false\n"));
@@ -1383,5 +1383,5 @@
     if (RT_FAILURE(rc))
     {
-        LogRel(("Error connecting to host. rc=%Vrc\n", rc));
+        LogRel(("Error connecting to host. rc=%Rrc\n", rc));
         return rc;
     }
@@ -1392,5 +1392,5 @@
     }
     g_ctx.eOwner = HOST;
-    LogFlowFunc(("g_ctx.client=%u rc=%Vrc\n", g_ctx.client, rc));
+    LogFlowFunc(("g_ctx.client=%u rc=%Rrc\n", g_ctx.client, rc));
     return rc;
 }
