# $Id: Makefile.kmk 77669 2019-03-12 16:34:13Z vboxsync $
## @file
# Toplevel sub-makefile for the EFI firmwares.
#
# Note! kBuild is only used for the build tools, the rest is handled by the
#       very custom EFI build system.
#

#
# Copyright (C) 2013-2019 Oracle Corporation
#
# This file is part of VirtualBox Open Source Edition (OSE), as
# available from http://www.virtualbox.org. This file is free software;
# you can redistribute it and/or modify it under the terms of the GNU
# General Public License (GPL) as published by the Free Software
# Foundation, in version 2 as it comes in the "COPYING" file of the
# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
#
# The contents of this file may alternatively be used under the terms
# of the Common Development and Distribution License Version 1.0
# (CDDL) only, as it comes in the "COPYING.CDDL" file of the
# VirtualBox OSE distribution, in which case the provisions of the
# CDDL are applicable instead of those of the GPL.
#
# You may elect to license modified versions of this file under the
# terms and conditions of either the GPL or the CDDL or both.
#

SUB_DEPTH = ../../../../..
include $(KBUILD_PATH)/subheader.kmk

#
# Make sure our Config.kmk is included.
#
ifndef VBOX_EFI_FIRMWARE_CONFIG_KMK_INCLUDED
 include $(PATH_SUB_CURRENT)/Config.kmk
endif


#
# Include sub-makefiles.
#
VBOX_EFI_BLDPROGS := $(BLDPROGS)
include $(PATH_SUB_CURRENT)/BaseTools/Makefile.kmk
VBOX_EFI_BLDPROGS := $(filter-out $(VBOX_EFI_BLDPROGS),$(BLDPROGS)) VBoxEfiBldPythonWrappers

#
# Binary wrappers for python scripts.
#
VBOX_EFI_PYTHON_WRAPPERS = \
	BPDG \
	build \
	Ecc \
	GenFds \
	GenPatchPcdTable \
	PatchPcdValue \
	Trim \
	TargetTool \
	UPT

INSTALLS += VBoxEfiBldPythonWrappers
VBoxEfiBldPythonWrappers_TEMPLATE = VBoxEfiBldProg
if1of ($(KBUILD_HOST), win os2)
 VBoxEfiBldPythonWrappers_EXEC_SOURCES = \
	$(foreach PyWrap,$(VBOX_EFI_PYTHON_WRAPPERS),$(VBoxEfiBldPythonWrappers_0_OUTDIR)/$(PyWrap).cmd)
else
 VBoxEfiBldPythonWrappers_EXEC_SOURCES = \
	$(addprefix $(VBoxEfiBldPythonWrappers_0_OUTDIR)/,$(VBOX_EFI_PYTHON_WRAPPERS))
endif
VBoxEfiBldPythonWrappers_CLEAN = $(VBoxEfiBldPythonWrappers_EXEC_SOURCES)

if1of ($(KBUILD_HOST), win os2)
 define VBoxEfiBldPythonWrappersRuleTemplate
  $$$$(VBoxEfiBldPythonWrappers_0_OUTDIR)/$(PyWrap).cmd: | $$$$(dir $$$$@)
	$$(APPEND) -tn "$$@" \
		'@SET PYTHONPATH=$$(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Source/Python' \
		'@"$$(VBOX_BLD_PYTHON_2X)" "$$(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Source/Python/$(PyWrap)/$(PyWrap).py" %*'
 endef
else
 define VBoxEfiBldPythonWrappersRuleTemplate
  $$$$(VBoxEfiBldPythonWrappers_0_OUTDIR)/$(PyWrap): | $$$$(dir $$$$@)
	$$(APPEND) -tn "$$@" \
		'#!$(ASH)' \
		'export PYTHONPATH="$$(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Source/Python"' \
		'exec "$$(VBOX_BLD_PYTHON_2X)" "$$(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Source/Python/$(PyWrap)/$(PyWrap).py" "$$(DOLLAR)@"'
	$$(CHMOD) a+x "$$@"
 endef
endif
$(foreach PyWrap,$(VBOX_EFI_PYTHON_WRAPPERS),$(eval $(VBoxEfiBldPythonWrappersRuleTemplate)))

#
# Rules for building and installing the VBox EFI firmware images.
#
INSTALLS += VBoxEfiFirmware
VBoxEfiFirmware_INST = $(INST_BIN)
VBoxEfiFirmware_MODE = 0644
VBoxEfiFirmware_SOURCES = \
	$(VBoxEfiFirmware_0_OUTDIR)/x86/$(VBOX_EFI_OUTPUT_SUBDIR)/FV/OVMF.fd=>VBoxEFI32.fd \
	$(VBoxEfiFirmware_0_OUTDIR)/amd64/$(VBOX_EFI_OUTPUT_SUBDIR)/FV/OVMF.fd=>VBoxEFI64.fd
VBoxEfiFirmware_BLDDIRS = \
	$(VBoxEfiFirmware_0_OUTDIR)/x86/ \
	$(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/ \
	$(VBoxEfiFirmware_0_OUTDIR)/amd64/ \
	$(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/
VBoxEfiFirmware_CLEAN = \
	$(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/target.txt \
	$(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/build_rule.txt \
	$(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/tools_def.txt \
	$(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/target.txt \
	$(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/build_rule.txt \
	$(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/tools_def.txt

# Install the debug info.
INSTALLS += VBoxEfiFirmwareDbg32
VBoxEfiFirmwareDbg32_INST = $(INST_VBOXDBG_SYMS)x86/
VBoxEfiFirmwareDbg32_MODE = 0644
if1of ($(KBUILD_HOST), win)
 VBoxEfiFirmwareDbg32_SOURCES = \
 	$(foreach mod,$(VBOX_EFI_MODULES),$(VBoxEfiFirmware_0_OUTDIR)/x86/$(VBOX_EFI_OUTPUT_SUBDIR)/IA32/$(mod).pdb)
else
 VBoxEfiFirmwareDbg32_SOURCES = \
 	$(foreach mod,$(VBOX_EFI_MODULES_FLAT),$(VBoxEfiFirmware_0_OUTDIR)/x86/$(VBOX_EFI_OUTPUT_SUBDIR)/IA32/$(mod).debug)
endif

INSTALLS += VBoxEfiFirmwareDbg64
VBoxEfiFirmwareDbg64_INST = $(INST_VBOXDBG_SYMS)amd64/
VBoxEfiFirmwareDbg64_MODE = 0644
if1of ($(KBUILD_HOST), win)
 VBoxEfiFirmwareDbg64_SOURCES = \
 	$(foreach mod,$(VBOX_EFI_MODULES),$(VBoxEfiFirmware_0_OUTDIR)/amd64/$(VBOX_EFI_OUTPUT_SUBDIR)/X64/$(mod).pdb)
else
 VBoxEfiFirmwareDbg64_SOURCES = \
 	$(foreach mod,$(VBOX_EFI_MODULES_FLAT),$(VBoxEfiFirmware_0_OUTDIR)/amd64/$(VBOX_EFI_OUTPUT_SUBDIR)/X64/$(mod).debug)
endif


#
# Install a custom clean up rule for dealing with the EFI build system output.
#
PASS_CLEAN_trgs += VBoxEfiFirmwareCleanup
VBoxEfiFirmwareCleanup:
	$(if $(VBoxEfiFirmware_0_OUTDIR),,exit 1)
	$(RM) -Rf -- "$(VBoxEfiFirmware_0_OUTDIR)/amd64/" "$(VBoxEfiFirmware_0_OUTDIR)/x86/"
.PHONY: VBoxEfiFirmwareCleanup


#
# The zipfile.
#
include $(KBUILD_PATH)/tools/ZIP.kmk
ifndef TOOL_ZIP_PACK
 TOOL_ZIP_PACK = zip
endif
VBoxEfiFirmware.zip: $(PATH_STAGE)/VBoxEfiFirmware.zip
$(PATH_STAGE)/VBoxEfiFirmware.zip:
	$(REDIRECT) -C "$(PATH_STAGE_BIN)" -- $(TOOL_ZIP_PACK) $(TOOL_ZIP_PACKFLAGS) -9X $@ \
		VBoxEFI32.fd \
		VBoxEFI64.fd
	$(REDIRECT) -C "$(PATH_STAGE)/$(INST_VBOXDBG_SYMS)" -- $(TOOL_ZIP_PACK) $(TOOL_ZIP_PACKFLAGS) -9X $@ \
		$(foreach mod,$(VBOX_EFI_MODULES_FLAT),amd64/$(mod)$(VBOX_EFI_DBG_SUFF)) \
		$(foreach mod,$(VBOX_EFI_MODULES_FLAT),x86/$(mod)$(VBOX_EFI_DBG_SUFF))

#
# Include the footer early so that we can use VBoxEfiFirmware_0_OUTDIR below.
#
include $(FILE_KBUILD_SUB_FOOTER)

#
# Incomplete list of dependencies relative.
#
VBOX_EFI_DEPENDENCIES = \
	$(VBOX_PATH_EFI_FIRMWARE)/../DevEFI.h \
       $(VBOX_PATH_EFI_FIRMWARE)/VBoxPkg/Library/VBoxDebugAgentLib/VBoxDebugAgentLib.c \
       $(VBOX_PATH_EFI_FIRMWARE)/VBoxPkg/Library/VBoxDebugAgentLib/VBoxDebugAgentLib.inf \
       $(VBOX_PATH_EFI_FIRMWARE)/VBoxPkg/Library/VBoxPeCoffExtraActionLib/VBoxPeCoffExtraActionLib.c \
       $(VBOX_PATH_EFI_FIRMWARE)/VBoxPkg/Library/VBoxPeCoffExtraActionLib/VBoxPeCoffExtraActionLib.inf \
       $(VBOX_PATH_EFI_FIRMWARE)/VBoxPkg/VBoxPkg.dec \
       \
       $(VBOX_PATH_EFI_FIRMWARE)/OvmfPkg/OvmfPkg.dec \
	$(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c \
	$(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/BdsConnect.c \
	$(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/BdsConsole.c \
	$(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/BdsMisc.c \
	$(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/DevicePath.c \
	$(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/GenericBdsLib.inf \
	$(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/GenericBdsStrings.uni \
	$(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/InternalBdsLib.h \
	$(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/String.c \
	$(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/String.h \

#
# The common build.py invocation part.
# Note! windir isn't set in cygwin on tinderwin2a. SystemRoot is.
# Note! MAKEFLAGS must be zapped on Windows so nmake don't get confused.
#
if1of ($(KBUILD_HOST), win)
 VBOX_EFI_REDIRECT_E_EQUAL:=$(EQUAL)
 VBOX_EFI_BUILD_CMD = $(REDIRECT) \
	-E 'PATH=$(VBOX_PATH_STAGE_EFI_BLDPROGS)$(VBOX_SEP)$(PATH);' \
	-E 'INCLUDE=$(PATH_ROOT)/include$(VBOX_SEP)$(PATH_OUT)$(VBOX_SEP)$(VBOX_SEP)$(PATH_TOOL_$(VBOX_VCC_TOOL)_INC)$(INCLUDE);' \
	-E 'COMSPEC=$(firstword $(windir) $(SystemRoot) C:\windows)\system32\cmd.exe' \
	-E 'MAKEFLAGS='
else
 VBOX_EFI_REDIRECT_E_EQUAL:=
VBOX_EFI_BUILD_CMD = $(REDIRECT) \
	-E "PATH=$(VBOX_PATH_STAGE_EFI_BLDPROGS)$(VBOX_SEP)$(PATH)" \
	-E     "C_INCLUDE_PATH=$(PATH_ROOT)/include$(VBOX_SEP)$(PATH_OUT)$(VBOX_SEP)$(C_INCLUDE_PATH)" \
	-E "CPLUS_INCLUDE_PATH=$(PATH_ROOT)/include$(VBOX_SEP)$(PATH_OUT)$(VBOX_SEP)$(C_INCLUDE_PATH)"
endif
VBOX_EFI_BUILD_CMD += \
	-E 'PYTHONPATH=$(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Source/Python' \
	-E 'PYTHONDONTWRITEBYTECODE=1' \
	-E 'IASL_BIN=$(VBOX_IASLCMD)' \
	-E 'NASM_BIN=$(VBOX_NASMCMD)' \
	-E 'CONF_PATH=$(abspath $(@D)/../../Conf)' \
	-E 'WORKSPACE=$(VBOX_PATH_EFI_FIRMWARE)' \
	-E 'EDK_TOOLS_PATH=$(VBOX_PATH_EFI_FIRMWARE)/BaseTools' \
	-E 'EFI_SOURCE$(VBOX_EFI_REDIRECT_E_EQUAL)' \
	-E 'ECP_SOURCE$(VBOX_EFI_REDIRECT_E_EQUAL)' \
	-E 'EDK_SOURCE$(VBOX_EFI_REDIRECT_E_EQUAL)' \
	-E 'X64_PETOOLS_PREFIX$(VBOX_EFI_REDIRECT_E_EQUAL)' \
	-E 'ARCH$(VBOX_EFI_REDIRECT_E_EQUAL)' \
	-E 'IPF_PETOOLS_PREFIX=__no_ipf__' \
	-E $(if-expr "$(KBUILD_VERBOSE)" != "",'EFI_QUIET=','EFI_QUIET=@') \
	-C '$(VBOX_PATH_EFI_FIRMWARE)' \
	-- $(VBOX_BLD_PYTHON_2X) "$(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Source/Python/build/build.py" \
	-D VBOX=1 \
	-D VBOX_WITH_OVMF=1 \
	-D BUILD_NEW_SHELL=1 \
	-D VBOX_REV=$(VBOX_SVN_REV) \
	-D "VBOX_OUTPUT_BASE_DIR=$(VBoxEfiFirmware_0_OUTDIR)" \
	-D "VBOX_PATH_ROOT=$(PATH_ROOT)" \
	-D "FD_SIZE_2MB=1" \
	$(if $(VBOX_OSE),-D "VBOX_OSE=1") \
	$(if-expr "$(KBUILD_VERBOSE)" != "",$(if-expr "$(KBUILD_VERBOSE)" >= 3,-v,),--silent --quiet) \
	--no-cache \
	--buildtarget $(VBOX_EFI_BUILD_TARGET) \
	--tagname $(VBOX_EFI_TOOL_CHAIN)

#
# Derive the number of parallel jobs (on windows) from KMK_OPTS_JOBS.
#
VBOX_EFI_MAX_THREADS := 1
if defined(KMK_OPTS_JOBS) && "$(KBUILD_HOST)" == "win"
 VBOX_EFI_MAX_THREADS := $(if-expr $(KMK_OPTS_JOBS) > 0,$(expr $(KMK_OPTS_JOBS) / 2),$(NUMBER_OF_PROCESSORS))
endif

#
# Tools configurations.
#
$(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/tools_def.txt \
$(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/tools_def.txt: \
               $(VBOX_PATH_EFI_FIRMWARE)/vbox-tools_def.txt \
		$(MAKEFILE) | $$(dir $$@)
	$(RM) -f -- "$@"
	$(SED) \
		-e 's,@VBOX_IASLCMD@,$(VBOX_IASLCMD),' \
		-e 's,@VBOX_YASMCMD@,$(VBOX_YASMCMD),' \
		-e 's,@VBOX_NASMCMD@,$(VBOX_NASMCMD),' \
		-e 's,@KMK@,$(MAKE),' \
               \
		-e 's,@VBOX_PATH_PREFIX_MINGW32@,$(VBOX_PATH_PREFIX_MINGW32),' \
		-e 's,@VBOX_PATH_PREFIX_MINGW64@,$(VBOX_PATH_PREFIX_MINGW64),' \
		-e 's,@VBOX_MINGW32_Wno@,-Wno-address $(VBOX_MINGW32_Wno-unused-but-set-variable) $(VBOX_MINGW32_Wno-maybe-uninitialized) $(VBOX_MINGW32_Wno-array-bounds),' \
		-e 's,@VBOX_MINGW64_Wno@,-Wno-address $(VBOX_MINGW64_Wno-unused-but-set-variable) $(VBOX_MINGW64_Wno-maybe-uninitialized) $(VBOX_MINGW64_Wno-array-bounds),' \
		-e 's,@VBOX_MINGW64_USER_LABEL_PREFIX@,$(VBOX_MINGW64_USER_LABEL_PREFIX),' \
               \
		-e 's,@PATH_VS2010@,$(PATH_TOOL_$(VBOX_VCC_TOOL)),' \
		-e 's,@PATH_VS2010_AMD64_BIN@,$(PATH_TOOL_$(VBOX_VCC_TOOL))/bin/$(subst x86,x86_amd64,$(KBUILD_HOST_ARCH)),' \
               \
		--output $@ $<

# This may not really need sed, just a plain file copy.
$(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/build_rule.txt \
$(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/build_rule.txt: \
               $(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Conf/build_rule.template \
		$(MAKEFILE) | $$(dir $$@)
	$(RM) -f -- "$@"
	$(SED) \
		-e 's,@VBOX_IASLCMD@,$(VBOX_IASLCMD),' \
		-e 's,@VBOX_YASMCMD@,$(VBOX_YASMCMD),' \
		-e 's,@VBOX_NASMCMD@,$(VBOX_NASMCMD),' \
		-e 's,@KMK@,$(MAKE),' \
               \
		-e 's,@VBOX_PATH_PREFIX_MINGW32@,$(VBOX_PATH_PREFIX_MINGW32),' \
		-e 's,@VBOX_PATH_PREFIX_MINGW64@,$(VBOX_PATH_PREFIX_MINGW64),' \
		-e 's,@VBOX_MINGW32_Wno@,-Wno-address $(VBOX_MINGW32_Wno-unused-but-set-variable) $(VBOX_MINGW32_Wno-maybe-uninitialized) $(VBOX_MINGW32_Wno-array-bounds),' \
		-e 's,@VBOX_MINGW64_Wno@,-Wno-address $(VBOX_MINGW64_Wno-unused-but-set-variable) $(VBOX_MINGW64_Wno-maybe-uninitialized) $(VBOX_MINGW64_Wno-array-bounds),' \
		-e 's,@VBOX_MINGW64_USER_LABEL_PREFIX@,$(VBOX_MINGW64_USER_LABEL_PREFIX),' \
               \
		-e 's,@PATH_VS2010@,$(PATH_TOOL_$(VBOX_VCC_TOOL)),' \
		-e 's,@PATH_VS2010_AMD64_BIN@,$(PATH_TOOL_$(VBOX_VCC_TOOL))/bin/$(subst x86,x86_amd64,$(KBUILD_HOST_ARCH)),' \
               \
		--output $@ $<


#
# VBoxEFI32
#
$(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/target.txt: $(MAKEFILE) | $$(dir $$@) $(VBOX_EFI_BLDPROGS)
	$(APPEND) -tn "$@" \
		"# Automatically generated, do not edit" \
		"" \
		"# These variables cannot be overriden by the build.py command line." \
		"TOOL_CHAIN_CONF = $(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/tools_def.txt" \
		"BUILD_RULE_CONF = $(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Conf/build_rule.template" \
		"" \
		"# These variables are overridden and this is just for show." \
		"ACTIVE_PLATFORM = OvmfPkg/OvmfPkgIa32.dsc" \
		"TARGET          = $(VBOX_EFI_BUILD_TARGET)" \
		"TARGET_ARCH     = IA32" \
		"TOOL_CHAIN_TAG  = $(VBOX_EFI_TOOL_CHAIN)" \
		"MAX_CONCURRENT_THREAD_NUMBER = $(VBOX_EFI_MAX_THREADS)"

$(VBoxEfiFirmware_0_OUTDIR)/x86/$(VBOX_EFI_OUTPUT_SUBDIR)/FV/OVMF.fd \
+ $(VBoxEfiFirmwareDbg32_SOURCES): \
		$(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/target.txt \
		$(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/tools_def.txt \
		$(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/build_rule.txt \
		$$(VBoxEfiResetVector-x86_1_TARGET) \
		$(VBOX_EFI_DEPENDENCIES) \
		$(VBOX_PATH_EFI_FIRMWARE)/OvmfPkg/OvmfPkgIa32.dsc \
		$(VBOX_PATH_EFI_FIRMWARE)/OvmfPkg/OvmfPkgIa32.fdf
	+ $(VBOX_EFI_BUILD_CMD) \
		--arch IA32 \
		--platform OvmfPkg/OvmfPkgIa32.dsc

#
# VBoxEFI64
#
$(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/target.txt: $(MAKEFILE) | $$(dir $$@) $(VBOX_EFI_BLDPROGS)
	$(APPEND) -tn "$@" \
		"# Automatically generated, do not edit" \
		"" \
		"# These variables cannot be overriden by the build.py command line." \
		"TOOL_CHAIN_CONF = $(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/tools_def.txt" \
		"BUILD_RULE_CONF = $(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Conf/build_rule.template" \
		"" \
		"# These variables are overridden and this is just for show." \
		"ACTIVE_PLATFORM = OvmfPkg/OvmfPkgX64.dsc" \
		"TARGET          = $(VBOX_EFI_BUILD_TARGET)" \
		"TARGET_ARCH     = X64" \
		"TOOL_CHAIN_TAG  = $(VBOX_EFI_TOOL_CHAIN)" \
		"MAX_CONCURRENT_THREAD_NUMBER = $(VBOX_EFI_MAX_THREADS)"

$(VBoxEfiFirmware_0_OUTDIR)/amd64/$(VBOX_EFI_OUTPUT_SUBDIR)/FV/OVMF.fd \
+ $(VBoxEfiFirmwareDbg64_SOURCES): \
		$(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/target.txt \
		$(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/tools_def.txt \
		$(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/build_rule.txt \
		$$(VBoxEfiResetVector-amd64_1_TARGET) \
		$(VBOX_EFI_DEPENDENCIES) \
		$(VBOX_PATH_EFI_FIRMWARE)/OvmfPkg/OvmfPkgX64.dsc \
		$(VBOX_PATH_EFI_FIRMWARE)/OvmfPkg/OvmfPkgX64.fdf
	+ $(VBOX_EFI_BUILD_CMD) \
		--arch X64 \
		--platform OvmfPkg/OvmfPkgX64.dsc

#
# Some aliases.
#
build-efi-x86:   $$(filter %VBoxEFI32.fd,$$(VBoxEfiFirmware_2_STAGE_TARGETS))
build-efi-amd64: $$(filter %VBoxEFI64.fd,$$(VBoxEfiFirmware_2_STAGE_TARGETS))