VirtualBox

source: vbox/trunk/src/VBox/Devices/PC/DevACPI.cpp@ 64808

Last change on this file since 64808 was 64393, checked in by vboxsync, 8 years ago

PDMPCIDEV: s/config/abConfig/ everywhere, removing the legacy alias.
  • Property svn:eol-style set to native
  • Property svn:keywords set to Id Revision
File size: 145.2 KB
Line 
1/* $Id: DevACPI.cpp 64393 2016-10-24 14:42:05Z vboxsync $ */
2/** @file
3 * DevACPI - Advanced Configuration and Power Interface (ACPI) Device.
4 */
5
6/*
7 * Copyright (C) 2006-2016 Oracle Corporation
8 *
9 * This file is part of VirtualBox Open Source Edition (OSE), as
10 * available from http://www.virtualbox.org. This file is free software;
11 * you can redistribute it and/or modify it under the terms of the GNU
12 * General Public License (GPL) as published by the Free Software
13 * Foundation, in version 2 as it comes in the "COPYING" file of the
14 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16 */
17
18
19/*********************************************************************************************************************************
20* Header Files *
21*********************************************************************************************************************************/
22#define LOG_GROUP LOG_GROUP_DEV_ACPI
23#include <VBox/vmm/pdmdev.h>
24#include <VBox/vmm/pgm.h>
25#include <VBox/vmm/dbgftrace.h>
26#include <VBox/vmm/vmcpuset.h>
27#include <VBox/log.h>
28#include <VBox/param.h>
29#include <iprt/assert.h>
30#include <iprt/asm.h>
31#include <iprt/asm-math.h>
32#include <iprt/file.h>
33#ifdef IN_RING3
34# include <iprt/alloc.h>
35# include <iprt/string.h>
36# include <iprt/uuid.h>
37#endif /* IN_RING3 */
38
39#include "VBoxDD.h"
40
41#ifdef LOG_ENABLED
42# define DEBUG_ACPI
43#endif
44
45
46
47/*********************************************************************************************************************************
48* Defined Constants And Macros *
49*********************************************************************************************************************************/
50#ifdef IN_RING3
51/** Locks the device state, ring-3 only. */
52# define DEVACPI_LOCK_R3(a_pThis) \
53 do { \
54 int rcLock = PDMCritSectEnter(&(a_pThis)->CritSect, VERR_IGNORED); \
55 AssertRC(rcLock); \
56 } while (0)
57#endif
58/** Unlocks the device state (all contexts). */
59#define DEVACPI_UNLOCK(a_pThis) \
60 do { PDMCritSectLeave(&(a_pThis)->CritSect); } while (0)
61
62
63#define DEBUG_HEX 0x3000
64#define DEBUG_CHR 0x3001
65
66/** PM Base Address PCI config space offset */
67#define PMBA 0x40
68/** PM Miscellaneous Power Management PCI config space offset */
69#define PMREGMISC 0x80
70
71#define PM_TMR_FREQ 3579545
72/** Default base for PM PIIX4 device */
73#define PM_PORT_BASE 0x4000
74/* Port offsets in PM device */
75enum
76{
77 PM1a_EVT_OFFSET = 0x00,
78 PM1b_EVT_OFFSET = -1, /**< not supported */
79 PM1a_CTL_OFFSET = 0x04,
80 PM1b_CTL_OFFSET = -1, /**< not supported */
81 PM2_CTL_OFFSET = -1, /**< not supported */
82 PM_TMR_OFFSET = 0x08,
83 GPE0_OFFSET = 0x20,
84 GPE1_OFFSET = -1 /**< not supported */
85};
86
87/* Undef this to enable 24 bit PM timer (mostly for debugging purposes) */
88#define PM_TMR_32BIT
89
90#define BAT_INDEX 0x00004040
91#define BAT_DATA 0x00004044
92#define SYSI_INDEX 0x00004048
93#define SYSI_DATA 0x0000404c
94#define ACPI_RESET_BLK 0x00004050
95
96/* PM1x status register bits */
97#define TMR_STS RT_BIT(0)
98#define RSR1_STS (RT_BIT(1) | RT_BIT(2) | RT_BIT(3))
99#define BM_STS RT_BIT(4)
100#define GBL_STS RT_BIT(5)
101#define RSR2_STS (RT_BIT(6) | RT_BIT(7))
102#define PWRBTN_STS RT_BIT(8)
103#define SLPBTN_STS RT_BIT(9)
104#define RTC_STS RT_BIT(10)
105#define IGN_STS RT_BIT(11)
106#define RSR3_STS (RT_BIT(12) | RT_BIT(13) | RT_BIT(14))
107#define WAK_STS RT_BIT(15)
108#define RSR_STS (RSR1_STS | RSR2_STS | RSR3_STS)
109
110/* PM1x enable register bits */
111#define TMR_EN RT_BIT(0)
112#define RSR1_EN (RT_BIT(1) | RT_BIT(2) | RT_BIT(3) | RT_BIT(4))
113#define GBL_EN RT_BIT(5)
114#define RSR2_EN (RT_BIT(6) | RT_BIT(7))
115#define PWRBTN_EN RT_BIT(8)
116#define SLPBTN_EN RT_BIT(9)
117#define RTC_EN RT_BIT(10)
118#define RSR3_EN (RT_BIT(11) | RT_BIT(12) | RT_BIT(13) | RT_BIT(14) | RT_BIT(15))
119#define RSR_EN (RSR1_EN | RSR2_EN | RSR3_EN)
120#define IGN_EN 0
121
122/* PM1x control register bits */
123#define SCI_EN RT_BIT(0)
124#define BM_RLD RT_BIT(1)
125#define GBL_RLS RT_BIT(2)
126#define RSR1_CNT (RT_BIT(3) | RT_BIT(4) | RT_BIT(5) | RT_BIT(6) | RT_BIT(7) | RT_BIT(8))
127#define IGN_CNT RT_BIT(9)
128#define SLP_TYPx_SHIFT 10
129#define SLP_TYPx_MASK 7
130#define SLP_EN RT_BIT(13)
131#define RSR2_CNT (RT_BIT(14) | RT_BIT(15))
132#define RSR_CNT (RSR1_CNT | RSR2_CNT)
133
134#define GPE0_BATTERY_INFO_CHANGED RT_BIT(0)
135
136enum
137{
138 BAT_STATUS_STATE = 0x00, /**< BST battery state */
139 BAT_STATUS_PRESENT_RATE = 0x01, /**< BST battery present rate */
140 BAT_STATUS_REMAINING_CAPACITY = 0x02, /**< BST battery remaining capacity */
141 BAT_STATUS_PRESENT_VOLTAGE = 0x03, /**< BST battery present voltage */
142 BAT_INFO_UNITS = 0x04, /**< BIF power unit */
143 BAT_INFO_DESIGN_CAPACITY = 0x05, /**< BIF design capacity */
144 BAT_INFO_LAST_FULL_CHARGE_CAPACITY = 0x06, /**< BIF last full charge capacity */
145 BAT_INFO_TECHNOLOGY = 0x07, /**< BIF battery technology */
146 BAT_INFO_DESIGN_VOLTAGE = 0x08, /**< BIF design voltage */
147 BAT_INFO_DESIGN_CAPACITY_OF_WARNING = 0x09, /**< BIF design capacity of warning */
148 BAT_INFO_DESIGN_CAPACITY_OF_LOW = 0x0A, /**< BIF design capacity of low */
149 BAT_INFO_CAPACITY_GRANULARITY_1 = 0x0B, /**< BIF battery capacity granularity 1 */
150 BAT_INFO_CAPACITY_GRANULARITY_2 = 0x0C, /**< BIF battery capacity granularity 2 */
151 BAT_DEVICE_STATUS = 0x0D, /**< STA device status */
152 BAT_POWER_SOURCE = 0x0E, /**< PSR power source */
153 BAT_INDEX_LAST
154};
155
156enum
157{
158 CPU_EVENT_TYPE_ADD = 0x01, /**< Event type add */
159 CPU_EVENT_TYPE_REMOVE = 0x03 /**< Event type remove */
160};
161
162enum
163{
164 SYSTEM_INFO_INDEX_LOW_MEMORY_LENGTH = 0,
165 SYSTEM_INFO_INDEX_USE_IOAPIC = 1,
166 SYSTEM_INFO_INDEX_HPET_STATUS = 2,
167 SYSTEM_INFO_INDEX_SMC_STATUS = 3,
168 SYSTEM_INFO_INDEX_FDC_STATUS = 4,
169 SYSTEM_INFO_INDEX_SERIAL2_IOBASE = 5,
170 SYSTEM_INFO_INDEX_SERIAL2_IRQ = 6,
171 SYSTEM_INFO_INDEX_SERIAL3_IOBASE = 7,
172 SYSTEM_INFO_INDEX_SERIAL3_IRQ = 8,
173 SYSTEM_INFO_INDEX_HIGH_MEMORY_LENGTH= 9,
174 SYSTEM_INFO_INDEX_RTC_STATUS = 10,
175 SYSTEM_INFO_INDEX_CPU_LOCKED = 11, /**< Contains a flag indicating whether the CPU is locked or not */
176 SYSTEM_INFO_INDEX_CPU_LOCK_CHECK = 12, /**< For which CPU the lock status should be checked */
177 SYSTEM_INFO_INDEX_CPU_EVENT_TYPE = 13, /**< Type of the CPU hot-plug event */
178 SYSTEM_INFO_INDEX_CPU_EVENT = 14, /**< The CPU id the event is for */
179 SYSTEM_INFO_INDEX_NIC_ADDRESS = 15, /**< NIC PCI address, or 0 */
180 SYSTEM_INFO_INDEX_AUDIO_ADDRESS = 16, /**< Audio card PCI address, or 0 */
181 SYSTEM_INFO_INDEX_POWER_STATES = 17,
182 SYSTEM_INFO_INDEX_IOC_ADDRESS = 18, /**< IO controller PCI address */
183 SYSTEM_INFO_INDEX_HBC_ADDRESS = 19, /**< host bus controller PCI address */
184 SYSTEM_INFO_INDEX_PCI_BASE = 20, /**< PCI bus MCFG MMIO range base */
185 SYSTEM_INFO_INDEX_PCI_LENGTH = 21, /**< PCI bus MCFG MMIO range length */
186 SYSTEM_INFO_INDEX_SERIAL0_IOBASE = 22,
187 SYSTEM_INFO_INDEX_SERIAL0_IRQ = 23,
188 SYSTEM_INFO_INDEX_SERIAL1_IOBASE = 24,
189 SYSTEM_INFO_INDEX_SERIAL1_IRQ = 25,
190 SYSTEM_INFO_INDEX_PARALLEL0_IOBASE = 26,
191 SYSTEM_INFO_INDEX_PARALLEL0_IRQ = 27,
192 SYSTEM_INFO_INDEX_PARALLEL1_IOBASE = 28,
193 SYSTEM_INFO_INDEX_PARALLEL1_IRQ = 29,
194 SYSTEM_INFO_INDEX_END = 30,
195 SYSTEM_INFO_INDEX_INVALID = 0x80,
196 SYSTEM_INFO_INDEX_VALID = 0x200
197};
198
199#define AC_OFFLINE 0
200#define AC_ONLINE 1
201
202#define BAT_TECH_PRIMARY 1
203#define BAT_TECH_SECONDARY 2
204
205#define STA_DEVICE_PRESENT_MASK RT_BIT(0) /**< present */
206#define STA_DEVICE_ENABLED_MASK RT_BIT(1) /**< enabled and decodes its resources */
207#define STA_DEVICE_SHOW_IN_UI_MASK RT_BIT(2) /**< should be shown in UI */
208#define STA_DEVICE_FUNCTIONING_PROPERLY_MASK RT_BIT(3) /**< functioning properly */
209#define STA_BATTERY_PRESENT_MASK RT_BIT(4) /**< the battery is present */
210
211/** SMBus Base Address PCI config space offset */
212#define SMBBA 0x90
213/** SMBus Host Configuration PCI config space offset */
214#define SMBHSTCFG 0xd2
215/** SMBus Slave Command PCI config space offset */
216#define SMBSLVC 0xd3
217/** SMBus Slave Shadow Port 1 PCI config space offset */
218#define SMBSHDW1 0xd4
219/** SMBus Slave Shadow Port 2 PCI config space offset */
220#define SMBSHDW2 0xd5
221/** SMBus Revision Identification PCI config space offset */
222#define SMBREV 0xd6
223
224#define SMBHSTCFG_SMB_HST_EN RT_BIT(0)
225#define SMBHSTCFG_INTRSEL (RT_BIT(1) | RT_BIT(2) | RT_BIT(3))
226#define SMBHSTCFG_INTRSEL_SMI 0
227#define SMBHSTCFG_INTRSEL_IRQ9 4
228#define SMBHSTCFG_INTRSEL_SHIFT 1
229
230/** Default base for SMBus PIIX4 device */
231#define SMB_PORT_BASE 0x4100
232
233/** SMBus Host Status Register I/O offset */
234#define SMBHSTSTS_OFF 0x0000
235/** SMBus Slave Status Register I/O offset */
236#define SMBSLVSTS_OFF 0x0001
237/** SMBus Host Count Register I/O offset */
238#define SMBHSTCNT_OFF 0x0002
239/** SMBus Host Command Register I/O offset */
240#define SMBHSTCMD_OFF 0x0003
241/** SMBus Host Address Register I/O offset */
242#define SMBHSTADD_OFF 0x0004
243/** SMBus Host Data 0 Register I/O offset */
244#define SMBHSTDAT0_OFF 0x0005
245/** SMBus Host Data 1 Register I/O offset */
246#define SMBHSTDAT1_OFF 0x0006
247/** SMBus Block Data Register I/O offset */
248#define SMBBLKDAT_OFF 0x0007
249/** SMBus Slave Control Register I/O offset */
250#define SMBSLVCNT_OFF 0x0008
251/** SMBus Shadow Command Register I/O offset */
252#define SMBSHDWCMD_OFF 0x0009
253/** SMBus Slave Event Register I/O offset */
254#define SMBSLVEVT_OFF 0x000a
255/** SMBus Slave Data Register I/O offset */
256#define SMBSLVDAT_OFF 0x000c
257
258#define SMBHSTSTS_HOST_BUSY RT_BIT(0)
259#define SMBHSTSTS_INTER RT_BIT(1)
260#define SMBHSTSTS_DEV_ERR RT_BIT(2)
261#define SMBHSTSTS_BUS_ERR RT_BIT(3)
262#define SMBHSTSTS_FAILED RT_BIT(4)
263#define SMBHSTSTS_INT_MASK (SMBHSTSTS_INTER | SMBHSTSTS_DEV_ERR | SMBHSTSTS_BUS_ERR | SMBHSTSTS_FAILED)
264
265#define SMBSLVSTS_WRITE_MASK 0x3c
266
267#define SMBHSTCNT_INTEREN RT_BIT(0)
268#define SMBHSTCNT_KILL RT_BIT(1)
269#define SMBHSTCNT_CMD_PROT (RT_BIT(2) | RT_BIT(3) | RT_BIT(4))
270#define SMBHSTCNT_START RT_BIT(6)
271#define SMBHSTCNT_WRITE_MASK (SMBHSTCNT_INTEREN | SMBHSTCNT_KILL | SMBHSTCNT_CMD_PROT)
272
273#define SMBSLVCNT_WRITE_MASK (RT_BIT(0) | RT_BIT(1) | RT_BIT(2) | RT_BIT(3))
274
275
276/*********************************************************************************************************************************
277* Structures and Typedefs *
278*********************************************************************************************************************************/
279/**
280 * The ACPI device state.
281 */
282typedef struct ACPIState
283{
284 PDMPCIDEV dev;
285 /** Critical section protecting the ACPI state. */
286 PDMCRITSECT CritSect;
287
288 uint16_t pm1a_en;
289 uint16_t pm1a_sts;
290 uint16_t pm1a_ctl;
291 /** Number of logical CPUs in guest */
292 uint16_t cCpus;
293 uint64_t u64PmTimerInitial;
294 PTMTIMERR3 pPmTimerR3;
295 PTMTIMERR0 pPmTimerR0;
296 PTMTIMERRC pPmTimerRC;
297
298 /* PM Timer last calculated value */
299 uint32_t uPmTimerVal;
300 uint32_t Alignment0;
301
302 uint32_t gpe0_en;
303 uint32_t gpe0_sts;
304
305 uint32_t uBatteryIndex;
306 uint32_t au8BatteryInfo[13];
307
308 uint32_t uSystemInfoIndex;
309 uint64_t u64RamSize;
310 /** The number of bytes above 4GB. */
311 uint64_t cbRamHigh;
312 /** The number of bytes below 4GB. */
313 uint32_t cbRamLow;
314
315 /** Current ACPI S* state. We support S0 and S5. */
316 uint32_t uSleepState;
317 uint8_t au8RSDPPage[0x1000];
318 /** This is a workaround for incorrect index field handling by Intels ACPICA.
319 * The system info _INI method writes to offset 0x200. We either observe a
320 * write request to index 0x80 (in that case we don't change the index) or a
321 * write request to offset 0x200 (in that case we divide the index value by
322 * 4. Note that the _STA method is sometimes called prior to the _INI method
323 * (ACPI spec 6.3.7, _STA). See the special case for BAT_DEVICE_STATUS in
324 * acpiR3BatIndexWrite() for handling this. */
325 uint8_t u8IndexShift;
326 /** provide an I/O-APIC */
327 uint8_t u8UseIOApic;
328 /** provide a floppy controller */
329 bool fUseFdc;
330 /** If High Precision Event Timer device should be supported */
331 bool fUseHpet;
332 /** If System Management Controller device should be supported */
333 bool fUseSmc;
334 /** the guest handled the last power button event */
335 bool fPowerButtonHandled;
336 /** If ACPI CPU device should be shown */
337 bool fShowCpu;
338 /** If Real Time Clock ACPI object to be shown */
339 bool fShowRtc;
340 /** I/O port address of PM device. */
341 RTIOPORT uPmIoPortBase;
342 /** I/O port address of SMBus device. */
343 RTIOPORT uSMBusIoPortBase;
344 /** Flag whether the GC part of the device is enabled. */
345 bool fGCEnabled;
346 /** Flag whether the R0 part of the device is enabled. */
347 bool fR0Enabled;
348 /** Array of flags of attached CPUs */
349 VMCPUSET CpuSetAttached;
350 /** Which CPU to check for the locked status. */
351 uint32_t idCpuLockCheck;
352 /** Mask of locked CPUs (used by the guest). */
353 VMCPUSET CpuSetLocked;
354 /** The CPU event type. */
355 uint32_t u32CpuEventType;
356 /** The CPU id affected. */
357 uint32_t u32CpuEvent;
358 /** Flag whether CPU hot plugging is enabled. */
359 bool fCpuHotPlug;
360 /** If MCFG ACPI table shown to the guest */
361 bool fUseMcfg;
362 /** Primary NIC PCI address. */
363 uint32_t u32NicPciAddress;
364 /** Primary audio card PCI address. */
365 uint32_t u32AudioPciAddress;
366 /** Flag whether S1 power state is enabled. */
367 bool fS1Enabled;
368 /** Flag whether S4 power state is enabled. */
369 bool fS4Enabled;
370 /** Flag whether S1 triggers a state save. */
371 bool fSuspendToSavedState;
372 /** Flag whether to set WAK_STS on resume (restore included). */
373 bool fSetWakeupOnResume;
374 /** PCI address of the IO controller device. */
375 uint32_t u32IocPciAddress;
376 /** PCI address of the host bus controller device. */
377 uint32_t u32HbcPciAddress;
378
379 uint32_t Alignment1;
380
381 /* Physical address of PCI config space MMIO region */
382 uint64_t u64PciConfigMMioAddress;
383 /* Length of PCI config space MMIO region */
384 uint64_t u64PciConfigMMioLength;
385 /** Serial 0 IRQ number */
386 uint8_t uSerial0Irq;
387 /** Serial 1 IRQ number */
388 uint8_t uSerial1Irq;
389 /** Serial 2 IRQ number */
390 uint8_t uSerial2Irq;
391 /** Serial 3 IRQ number */
392 uint8_t uSerial3Irq;
393 /** Serial 0 IO port base */
394 RTIOPORT uSerial0IoPortBase;
395 /** Serial 1 IO port base */
396 RTIOPORT uSerial1IoPortBase;
397 /** Serial 2 IO port base */
398 RTIOPORT uSerial2IoPortBase;
399 /** Serial 3 IO port base */
400 RTIOPORT uSerial3IoPortBase;
401
402 /** @name Parallel port config bits
403 * @{ */
404 /** Parallel 0 IRQ number */
405 uint8_t uParallel0Irq;
406 /** Parallel 1 IRQ number */
407 uint8_t uParallel1Irq;
408 /** Parallel 0 IO port base */
409 RTIOPORT uParallel0IoPortBase;
410 /** Parallel 1 IO port base */
411 RTIOPORT uParallel1IoPortBase;
412 /** @} */
413
414 uint32_t Alignment2;
415
416 /** ACPI port base interface. */
417 PDMIBASE IBase;
418 /** ACPI port interface. */
419 PDMIACPIPORT IACPIPort;
420 /** Pointer to the device instance. */
421 PPDMDEVINSR3 pDevInsR3;
422 PPDMDEVINSR0 pDevInsR0;
423 PPDMDEVINSRC pDevInsRC;
424
425 uint32_t Alignment3;
426 /** Pointer to the driver base interface. */
427 R3PTRTYPE(PPDMIBASE) pDrvBase;
428 /** Pointer to the driver connector interface. */
429 R3PTRTYPE(PPDMIACPICONNECTOR) pDrv;
430
431 /** Pointer to default PCI config read function. */
432 R3PTRTYPE(PFNPCICONFIGREAD) pfnAcpiPciConfigRead;
433 /** Pointer to default PCI config write function. */
434 R3PTRTYPE(PFNPCICONFIGWRITE) pfnAcpiPciConfigWrite;
435
436 /** If custom table should be supported */
437 bool fUseCust;
438 /** ACPI OEM ID */
439 uint8_t au8OemId[6];
440 /** ACPI Crator ID */
441 uint8_t au8CreatorId[4];
442 /** ACPI Crator Rev */
443 uint32_t u32CreatorRev;
444 /** ACPI custom OEM Tab ID */
445 uint8_t au8OemTabId[8];
446 /** ACPI custom OEM Rev */
447 uint32_t u32OemRevision;
448 uint32_t Alignment4;
449
450 /** The custom table binary data. */
451 R3PTRTYPE(uint8_t *) pu8CustBin;
452 /** The size of the custom table binary. */
453 uint64_t cbCustBin;
454
455 /** SMBus Host Status Register */
456 uint8_t u8SMBusHstSts;
457 /** SMBus Slave Status Register */
458 uint8_t u8SMBusSlvSts;
459 /** SMBus Host Control Register */
460 uint8_t u8SMBusHstCnt;
461 /** SMBus Host Command Register */
462 uint8_t u8SMBusHstCmd;
463 /** SMBus Host Address Register */
464 uint8_t u8SMBusHstAdd;
465 /** SMBus Host Data 0 Register */
466 uint8_t u8SMBusHstDat0;
467 /** SMBus Host Data 1 Register */
468 uint8_t u8SMBusHstDat1;
469 /** SMBus Slave Control Register */
470 uint8_t u8SMBusSlvCnt;
471 /** SMBus Shadow Command Register */
472 uint8_t u8SMBusShdwCmd;
473 /** SMBus Slave Event Register */
474 uint16_t u16SMBusSlvEvt;
475 /** SMBus Slave Data Register */
476 uint16_t u16SMBusSlvDat;
477 /** SMBus Host Block Data Buffer */
478 uint8_t au8SMBusBlkDat[32];
479 /** SMBus Host Block Index */
480 uint8_t u8SMBusBlkIdx;
481} ACPIState;
482
483#pragma pack(1)
484
485/** Generic Address Structure (see ACPIspec 3.0, 5.2.3.1) */
486struct ACPIGENADDR
487{
488 uint8_t u8AddressSpaceId; /**< 0=sys, 1=IO, 2=PCICfg, 3=emb, 4=SMBus */
489 uint8_t u8RegisterBitWidth; /**< size in bits of the given register */
490 uint8_t u8RegisterBitOffset; /**< bit offset of register */
491 uint8_t u8AccessSize; /**< 1=byte, 2=word, 3=dword, 4=qword */
492 uint64_t u64Address; /**< 64-bit address of register */
493};
494AssertCompileSize(ACPIGENADDR, 12);
495
496/** Root System Description Pointer */
497struct ACPITBLRSDP
498{
499 uint8_t au8Signature[8]; /**< 'RSD PTR ' */
500 uint8_t u8Checksum; /**< checksum for the first 20 bytes */
501 uint8_t au8OemId[6]; /**< OEM-supplied identifier */
502 uint8_t u8Revision; /**< revision number, currently 2 */
503#define ACPI_REVISION 2 /**< ACPI 3.0 */
504 uint32_t u32RSDT; /**< phys addr of RSDT */
505 uint32_t u32Length; /**< bytes of this table */
506 uint64_t u64XSDT; /**< 64-bit phys addr of XSDT */
507 uint8_t u8ExtChecksum; /**< checksum of entire table */
508 uint8_t u8Reserved[3]; /**< reserved */
509};
510AssertCompileSize(ACPITBLRSDP, 36);
511
512/** System Description Table Header */
513struct ACPITBLHEADER
514{
515 uint8_t au8Signature[4]; /**< table identifier */
516 uint32_t u32Length; /**< length of the table including header */
517 uint8_t u8Revision; /**< revision number */
518 uint8_t u8Checksum; /**< all fields inclusive this add to zero */
519 uint8_t au8OemId[6]; /**< OEM-supplied string */
520 uint8_t au8OemTabId[8]; /**< to identify the particular data table */
521 uint32_t u32OemRevision; /**< OEM-supplied revision number */
522 uint8_t au8CreatorId[4]; /**< ID for the ASL compiler */
523 uint32_t u32CreatorRev; /**< revision for the ASL compiler */
524};
525AssertCompileSize(ACPITBLHEADER, 36);
526
527/** Root System Description Table */
528struct ACPITBLRSDT
529{
530 ACPITBLHEADER header;
531 uint32_t u32Entry[1]; /**< array of phys. addresses to other tables */
532};
533AssertCompileSize(ACPITBLRSDT, 40);
534
535/** Extended System Description Table */
536struct ACPITBLXSDT
537{
538 ACPITBLHEADER header;
539 uint64_t u64Entry[1]; /**< array of phys. addresses to other tables */
540};
541AssertCompileSize(ACPITBLXSDT, 44);
542
543/** Fixed ACPI Description Table */
544struct ACPITBLFADT
545{
546 ACPITBLHEADER header;
547 uint32_t u32FACS; /**< phys. address of FACS */
548 uint32_t u32DSDT; /**< phys. address of DSDT */
549 uint8_t u8IntModel; /**< was eleminated in ACPI 2.0 */
550#define INT_MODEL_DUAL_PIC 1 /**< for ACPI 2+ */
551#define INT_MODEL_MULTIPLE_APIC 2
552 uint8_t u8PreferredPMProfile; /**< preferred power management profile */
553 uint16_t u16SCIInt; /**< system vector the SCI is wired in 8259 mode */
554#define SCI_INT 9
555 uint32_t u32SMICmd; /**< system port address of SMI command port */
556#define SMI_CMD 0x0000442e
557 uint8_t u8AcpiEnable; /**< SMICmd val to disable ownership of ACPIregs */
558#define ACPI_ENABLE 0xa1
559 uint8_t u8AcpiDisable; /**< SMICmd val to re-enable ownership of ACPIregs */
560#define ACPI_DISABLE 0xa0
561 uint8_t u8S4BIOSReq; /**< SMICmd val to enter S4BIOS state */
562 uint8_t u8PStateCnt; /**< SMICmd val to assume processor performance
563 state control responsibility */
564 uint32_t u32PM1aEVTBLK; /**< port addr of PM1a event regs block */
565 uint32_t u32PM1bEVTBLK; /**< port addr of PM1b event regs block */
566 uint32_t u32PM1aCTLBLK; /**< port addr of PM1a control regs block */
567 uint32_t u32PM1bCTLBLK; /**< port addr of PM1b control regs block */
568 uint32_t u32PM2CTLBLK; /**< port addr of PM2 control regs block */
569 uint32_t u32PMTMRBLK; /**< port addr of PMTMR regs block */
570 uint32_t u32GPE0BLK; /**< port addr of gen-purp event 0 regs block */
571 uint32_t u32GPE1BLK; /**< port addr of gen-purp event 1 regs block */
572 uint8_t u8PM1EVTLEN; /**< bytes decoded by PM1a_EVT_BLK. >= 4 */
573 uint8_t u8PM1CTLLEN; /**< bytes decoded by PM1b_CNT_BLK. >= 2 */
574 uint8_t u8PM2CTLLEN; /**< bytes decoded by PM2_CNT_BLK. >= 1 or 0 */
575 uint8_t u8PMTMLEN; /**< bytes decoded by PM_TMR_BLK. ==4 */
576 uint8_t u8GPE0BLKLEN; /**< bytes decoded by GPE0_BLK. %2==0 */
577#define GPE0_BLK_LEN 2
578 uint8_t u8GPE1BLKLEN; /**< bytes decoded by GPE1_BLK. %2==0 */
579#define GPE1_BLK_LEN 0
580 uint8_t u8GPE1BASE; /**< offset of GPE1 based events */
581#define GPE1_BASE 0
582 uint8_t u8CSTCNT; /**< SMICmd val to indicate OS supp for C states */
583 uint16_t u16PLVL2LAT; /**< us to enter/exit C2. >100 => unsupported */
584#define P_LVL2_LAT 101 /**< C2 state not supported */
585 uint16_t u16PLVL3LAT; /**< us to enter/exit C3. >1000 => unsupported */
586#define P_LVL3_LAT 1001 /**< C3 state not supported */
587 uint16_t u16FlushSize; /**< # of flush strides to read to flush dirty
588 lines from any processors memory caches */
589#define FLUSH_SIZE 0 /**< Ignored if WBVIND set in FADT_FLAGS */
590 uint16_t u16FlushStride; /**< cache line width */
591#define FLUSH_STRIDE 0 /**< Ignored if WBVIND set in FADT_FLAGS */
592 uint8_t u8DutyOffset;
593 uint8_t u8DutyWidth;
594 uint8_t u8DayAlarm; /**< RTC CMOS RAM index of day-of-month alarm */
595 uint8_t u8MonAlarm; /**< RTC CMOS RAM index of month-of-year alarm */
596 uint8_t u8Century; /**< RTC CMOS RAM index of century */
597 uint16_t u16IAPCBOOTARCH; /**< IA-PC boot architecture flags */
598#define IAPC_BOOT_ARCH_LEGACY_DEV RT_BIT(0) /**< legacy devices present such as LPT
599 (COM too?) */
600#define IAPC_BOOT_ARCH_8042 RT_BIT(1) /**< legacy keyboard device present */
601#define IAPC_BOOT_ARCH_NO_VGA RT_BIT(2) /**< VGA not present */
602#define IAPC_BOOT_ARCH_NO_MSI RT_BIT(3) /**< OSPM must not enable MSIs on this platform */
603#define IAPC_BOOT_ARCH_NO_ASPM RT_BIT(4) /**< OSPM must not enable ASPM on this platform */
604 uint8_t u8Must0_0; /**< must be 0 */
605 uint32_t u32Flags; /**< fixed feature flags */
606#define FADT_FL_WBINVD RT_BIT(0) /**< emulation of WBINVD available */
607#define FADT_FL_WBINVD_FLUSH RT_BIT(1)
608#define FADT_FL_PROC_C1 RT_BIT(2) /**< 1=C1 supported on all processors */
609#define FADT_FL_P_LVL2_UP RT_BIT(3) /**< 1=C2 works on SMP and UNI systems */
610#define FADT_FL_PWR_BUTTON RT_BIT(4) /**< 1=power button handled as ctrl method dev */
611#define FADT_FL_SLP_BUTTON RT_BIT(5) /**< 1=sleep button handled as ctrl method dev */
612#define FADT_FL_FIX_RTC RT_BIT(6) /**< 0=RTC wake status in fixed register */
613#define FADT_FL_RTC_S4 RT_BIT(7) /**< 1=RTC can wake system from S4 */
614#define FADT_FL_TMR_VAL_EXT RT_BIT(8) /**< 1=TMR_VAL implemented as 32 bit */
615#define FADT_FL_DCK_CAP RT_BIT(9) /**< 0=system cannot support docking */
616#define FADT_FL_RESET_REG_SUP RT_BIT(10) /**< 1=system supports system resets */
617#define FADT_FL_SEALED_CASE RT_BIT(11) /**< 1=case is sealed */
618#define FADT_FL_HEADLESS RT_BIT(12) /**< 1=system cannot detect moni/keyb/mouse */
619#define FADT_FL_CPU_SW_SLP RT_BIT(13)
620#define FADT_FL_PCI_EXT_WAK RT_BIT(14) /**< 1=system supports PCIEXP_WAKE_STS */
621#define FADT_FL_USE_PLATFORM_CLOCK RT_BIT(15) /**< 1=system has ACPI PM timer */
622#define FADT_FL_S4_RTC_STS_VALID RT_BIT(16) /**< 1=RTC_STS flag is valid when waking from S4 */
623#define FADT_FL_REMOVE_POWER_ON_CAPABLE RT_BIT(17) /**< 1=platform can remote power on */
624#define FADT_FL_FORCE_APIC_CLUSTER_MODEL RT_BIT(18)
625#define FADT_FL_FORCE_APIC_PHYS_DEST_MODE RT_BIT(19)
626
627/* PM Timer mask and msb */
628#ifndef PM_TMR_32BIT
629#define TMR_VAL_MSB 0x800000
630#define TMR_VAL_MASK 0xffffff
631#undef FADT_FL_TMR_VAL_EXT
632#define FADT_FL_TMR_VAL_EXT 0
633#else
634#define TMR_VAL_MSB 0x80000000
635#define TMR_VAL_MASK 0xffffffff
636#endif
637
638 /** Start of the ACPI 2.0 extension. */
639 ACPIGENADDR ResetReg; /**< ext addr of reset register */
640 uint8_t u8ResetVal; /**< ResetReg value to reset the system */
641#define ACPI_RESET_REG_VAL 0x10
642 uint8_t au8Must0_1[3]; /**< must be 0 */
643 uint64_t u64XFACS; /**< 64-bit phys address of FACS */
644 uint64_t u64XDSDT; /**< 64-bit phys address of DSDT */
645 ACPIGENADDR X_PM1aEVTBLK; /**< ext addr of PM1a event regs block */
646 ACPIGENADDR X_PM1bEVTBLK; /**< ext addr of PM1b event regs block */
647 ACPIGENADDR X_PM1aCTLBLK; /**< ext addr of PM1a control regs block */
648 ACPIGENADDR X_PM1bCTLBLK; /**< ext addr of PM1b control regs block */
649 ACPIGENADDR X_PM2CTLBLK; /**< ext addr of PM2 control regs block */
650 ACPIGENADDR X_PMTMRBLK; /**< ext addr of PMTMR control regs block */
651 ACPIGENADDR X_GPE0BLK; /**< ext addr of GPE1 regs block */
652 ACPIGENADDR X_GPE1BLK; /**< ext addr of GPE1 regs block */
653};
654AssertCompileSize(ACPITBLFADT, 244);
655#define ACPITBLFADT_VERSION1_SIZE RT_OFFSETOF(ACPITBLFADT, ResetReg)
656
657/** Firmware ACPI Control Structure */
658struct ACPITBLFACS
659{
660 uint8_t au8Signature[4]; /**< 'FACS' */
661 uint32_t u32Length; /**< bytes of entire FACS structure >= 64 */
662 uint32_t u32HWSignature; /**< systems HW signature at last boot */
663 uint32_t u32FWVector; /**< address of waking vector */
664 uint32_t u32GlobalLock; /**< global lock to sync HW/SW */
665 uint32_t u32Flags; /**< FACS flags */
666 uint64_t u64X_FWVector; /**< 64-bit waking vector */
667 uint8_t u8Version; /**< version of this table */
668 uint8_t au8Reserved[31]; /**< zero */
669};
670AssertCompileSize(ACPITBLFACS, 64);
671
672/** Processor Local APIC Structure */
673struct ACPITBLLAPIC
674{
675 uint8_t u8Type; /**< 0 = LAPIC */
676 uint8_t u8Length; /**< 8 */
677 uint8_t u8ProcId; /**< processor ID */
678 uint8_t u8ApicId; /**< local APIC ID */
679 uint32_t u32Flags; /**< Flags */
680#define LAPIC_ENABLED 0x1
681};
682AssertCompileSize(ACPITBLLAPIC, 8);
683
684/** I/O APIC Structure */
685struct ACPITBLIOAPIC
686{
687 uint8_t u8Type; /**< 1 == I/O APIC */
688 uint8_t u8Length; /**< 12 */
689 uint8_t u8IOApicId; /**< I/O APIC ID */
690 uint8_t u8Reserved; /**< 0 */
691 uint32_t u32Address; /**< phys address to access I/O APIC */
692 uint32_t u32GSIB; /**< global system interrupt number to start */
693};
694AssertCompileSize(ACPITBLIOAPIC, 12);
695
696/** Interrupt Source Override Structure */
697struct ACPITBLISO
698{
699 uint8_t u8Type; /**< 2 == Interrupt Source Override*/
700 uint8_t u8Length; /**< 10 */
701 uint8_t u8Bus; /**< Bus */
702 uint8_t u8Source; /**< Bus-relative interrupt source (IRQ) */
703 uint32_t u32GSI; /**< Global System Interrupt */
704 uint16_t u16Flags; /**< MPS INTI flags Global */
705};
706AssertCompileSize(ACPITBLISO, 10);
707#define NUMBER_OF_IRQ_SOURCE_OVERRIDES 2
708
709/** HPET Descriptor Structure */
710struct ACPITBLHPET
711{
712 ACPITBLHEADER aHeader;
713 uint32_t u32Id; /**< hardware ID of event timer block
714 [31:16] PCI vendor ID of first timer block
715 [15] legacy replacement IRQ routing capable
716 [14] reserved
717 [13] COUNT_SIZE_CAP counter size
718 [12:8] number of comparators in first timer block
719 [7:0] hardware rev ID */
720 ACPIGENADDR HpetAddr; /**< lower 32-bit base address */
721 uint8_t u32Number; /**< sequence number starting at 0 */
722 uint16_t u32MinTick; /**< minimum clock ticks which can be set without
723 lost interrupts while the counter is programmed
724 to operate in periodic mode. Unit: clock tick. */
725 uint8_t u8Attributes; /**< page protection and OEM attribute. */
726};
727AssertCompileSize(ACPITBLHPET, 56);
728
729/** MCFG Descriptor Structure */
730typedef struct ACPITBLMCFG
731{
732 ACPITBLHEADER aHeader;
733 uint64_t u64Reserved;
734} ACPITBLMCFG;
735AssertCompileSize(ACPITBLMCFG, 44);
736
737/** Number of such entries can be computed from the whole table length in header */
738typedef struct ACPITBLMCFGENTRY
739{
740 uint64_t u64BaseAddress;
741 uint16_t u16PciSegmentGroup;
742 uint8_t u8StartBus;
743 uint8_t u8EndBus;
744 uint32_t u32Reserved;
745} ACPITBLMCFGENTRY;
746AssertCompileSize(ACPITBLMCFGENTRY, 16);
747
748#define PCAT_COMPAT 0x1 /**< system has also a dual-8259 setup */
749
750/** Custom Description Table */
751struct ACPITBLCUST
752{
753 ACPITBLHEADER header;
754 uint8_t au8Data[476];
755};
756AssertCompileSize(ACPITBLCUST, 512);
757
758
759#pragma pack()
760
761
762#ifndef VBOX_DEVICE_STRUCT_TESTCASE /* exclude the rest of the file */
763
764
765/*********************************************************************************************************************************
766* Internal Functions *
767*********************************************************************************************************************************/
768RT_C_DECLS_BEGIN
769PDMBOTHCBDECL(int) acpiPMTmrRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb);
770RT_C_DECLS_END
771#ifdef IN_RING3
772static int acpiR3PlantTables(ACPIState *pThis);
773#endif
774
775/* SCI, usually IRQ9 */
776DECLINLINE(void) acpiSetIrq(ACPIState *pThis, int level)
777{
778 PDMDevHlpPCISetIrq(pThis->CTX_SUFF(pDevIns), 0, level);
779}
780
781DECLINLINE(bool) pm1a_level(ACPIState *pThis)
782{
783 return (pThis->pm1a_ctl & SCI_EN)
784 && (pThis->pm1a_en & pThis->pm1a_sts & ~(RSR_EN | IGN_EN));
785}
786
787DECLINLINE(bool) gpe0_level(ACPIState *pThis)
788{
789 return !!(pThis->gpe0_en & pThis->gpe0_sts);
790}
791
792DECLINLINE(bool) smbus_level(ACPIState *pThis)
793{
794 return (pThis->u8SMBusHstCnt & SMBHSTCNT_INTEREN)
795 && (pThis->dev.abConfig[SMBHSTCFG] & SMBHSTCFG_SMB_HST_EN)
796 && (pThis->dev.abConfig[SMBHSTCFG] & SMBHSTCFG_INTRSEL) == SMBHSTCFG_INTRSEL_IRQ9 << SMBHSTCFG_INTRSEL_SHIFT
797 && (pThis->u8SMBusHstSts & SMBHSTSTS_INT_MASK);
798}
799
800DECLINLINE(bool) acpiSCILevel(ACPIState *pThis)
801{
802 return pm1a_level(pThis) || gpe0_level(pThis) || smbus_level(pThis);
803}
804
805/**
806 * Used by acpiR3PM1aStsWrite, acpiR3PM1aEnWrite, acpiR3PmTimer,
807 * acpiR3Port_PowerBuffonPress, acpiR3Port_SleepButtonPress
808 * and acpiPmTmrRead to update the PM1a.STS and PM1a.EN
809 * registers and trigger IRQs.
810 *
811 * Caller must hold the state lock.
812 *
813 * @param pThis The ACPI instance.
814 * @param sts The new PM1a.STS value.
815 * @param en The new PM1a.EN value.
816 */
817static void apicUpdatePm1a(ACPIState *pThis, uint32_t sts, uint32_t en)
818{
819 Assert(PDMCritSectIsOwner(&pThis->CritSect));
820
821 const bool old_level = acpiSCILevel(pThis);
822 pThis->pm1a_en = en;
823 pThis->pm1a_sts = sts;
824 const bool new_level = acpiSCILevel(pThis);
825
826 LogFunc(("old=%x new=%x\n", old_level, new_level));
827
828 if (new_level != old_level)
829 acpiSetIrq(pThis, new_level);
830}
831
832#ifdef IN_RING3
833
834/**
835 * Used by acpiR3Gpe0StsWrite, acpiR3Gpe0EnWrite, acpiAttach and acpiDetach to
836 * update the GPE0.STS and GPE0.EN registers and trigger IRQs.
837 *
838 * Caller must hold the state lock.
839 *
840 * @param pThis The ACPI instance.
841 * @param sts The new GPE0.STS value.
842 * @param en The new GPE0.EN value.
843 */
844static void apicR3UpdateGpe0(ACPIState *pThis, uint32_t sts, uint32_t en)
845{
846 Assert(PDMCritSectIsOwner(&pThis->CritSect));
847
848 const bool old_level = acpiSCILevel(pThis);
849 pThis->gpe0_en = en;
850 pThis->gpe0_sts = sts;
851 const bool new_level = acpiSCILevel(pThis);
852
853 LogFunc(("old=%x new=%x\n", old_level, new_level));
854
855 if (new_level != old_level)
856 acpiSetIrq(pThis, new_level);
857}
858
859/**
860 * Used by acpiR3PM1aCtlWrite to power off the VM.
861 *
862 * @param pThis The ACPI instance.
863 * @returns Strict VBox status code.
864 */
865static int acpiR3DoPowerOff(ACPIState *pThis)
866{
867 int rc = PDMDevHlpVMPowerOff(pThis->pDevInsR3);
868 if (RT_FAILURE(rc))
869 AssertMsgFailed(("Could not power down the VM. rc = %Rrc\n", rc));
870 return rc;
871}
872
873/**
874 * Used by acpiR3PM1aCtlWrite to put the VM to sleep.
875 *
876 * @param pThis The ACPI instance.
877 * @returns Strict VBox status code.
878 */
879static int acpiR3DoSleep(ACPIState *pThis)
880{
881 /* We must set WAK_STS on resume (includes restore) so the guest knows that
882 we've woken up and can continue executing code. The guest is probably
883 reading the PMSTS register in a loop to check this. */
884 int rc;
885 pThis->fSetWakeupOnResume = true;
886 if (pThis->fSuspendToSavedState)
887 {
888 rc = PDMDevHlpVMSuspendSaveAndPowerOff(pThis->pDevInsR3);
889 if (rc != VERR_NOT_SUPPORTED)
890 AssertRC(rc);
891 else
892 {
893 LogRel(("ACPI: PDMDevHlpVMSuspendSaveAndPowerOff is not supported, falling back to suspend-only\n"));
894 rc = PDMDevHlpVMSuspend(pThis->pDevInsR3);
895 AssertRC(rc);
896 }
897 }
898 else
899 {
900 rc = PDMDevHlpVMSuspend(pThis->pDevInsR3);
901 AssertRC(rc);
902 }
903 return rc;
904}
905
906
907/**
908 * @interface_method_impl{PDMIACPIPORT,pfnPowerButtonPress}
909 */
910static DECLCALLBACK(int) acpiR3Port_PowerButtonPress(PPDMIACPIPORT pInterface)
911{
912 ACPIState *pThis = RT_FROM_MEMBER(pInterface, ACPIState, IACPIPort);
913 DEVACPI_LOCK_R3(pThis);
914
915 Log(("acpiR3Port_PowerButtonPress: handled=%d status=%x\n", pThis->fPowerButtonHandled, pThis->pm1a_sts));
916 pThis->fPowerButtonHandled = false;
917 apicUpdatePm1a(pThis, pThis->pm1a_sts | PWRBTN_STS, pThis->pm1a_en);
918
919 DEVACPI_UNLOCK(pThis);
920 return VINF_SUCCESS;
921}
922
923/**
924 * @interface_method_impl{PDMIACPIPORT,pfnGetPowerButtonHandled}
925 */
926static DECLCALLBACK(int) acpiR3Port_GetPowerButtonHandled(PPDMIACPIPORT pInterface, bool *pfHandled)
927{
928 ACPIState *pThis = RT_FROM_MEMBER(pInterface, ACPIState, IACPIPort);
929 DEVACPI_LOCK_R3(pThis);
930
931 *pfHandled = pThis->fPowerButtonHandled;
932
933 DEVACPI_UNLOCK(pThis);
934 return VINF_SUCCESS;
935}
936
937/**
938 * @interface_method_impl{PDMIACPIPORT,pfnGetGuestEnteredACPIMode, Check if the
939 * Guest entered into G0 (working) or G1 (sleeping)}
940 */
941static DECLCALLBACK(int) acpiR3Port_GetGuestEnteredACPIMode(PPDMIACPIPORT pInterface, bool *pfEntered)
942{
943 ACPIState *pThis = RT_FROM_MEMBER(pInterface, ACPIState, IACPIPort);
944 DEVACPI_LOCK_R3(pThis);
945
946 *pfEntered = (pThis->pm1a_ctl & SCI_EN) != 0;
947
948 DEVACPI_UNLOCK(pThis);
949 return VINF_SUCCESS;
950}
951
952/**
953 * @interface_method_impl{PDMIACPIPORT,pfnGetCpuStatus}
954 */
955static DECLCALLBACK(int) acpiR3Port_GetCpuStatus(PPDMIACPIPORT pInterface, unsigned uCpu, bool *pfLocked)
956{
957 ACPIState *pThis = RT_FROM_MEMBER(pInterface, ACPIState, IACPIPort);
958 DEVACPI_LOCK_R3(pThis);
959
960 *pfLocked = VMCPUSET_IS_PRESENT(&pThis->CpuSetLocked, uCpu);
961
962 DEVACPI_UNLOCK(pThis);
963 return VINF_SUCCESS;
964}
965
966/**
967 * Send an ACPI sleep button event.
968 *
969 * @returns VBox status code
970 * @param pInterface Pointer to the interface structure containing the called function pointer.
971 */
972static DECLCALLBACK(int) acpiR3Port_SleepButtonPress(PPDMIACPIPORT pInterface)
973{
974 ACPIState *pThis = RT_FROM_MEMBER(pInterface, ACPIState, IACPIPort);
975 DEVACPI_LOCK_R3(pThis);
976
977 apicUpdatePm1a(pThis, pThis->pm1a_sts | SLPBTN_STS, pThis->pm1a_en);
978
979 DEVACPI_UNLOCK(pThis);
980 return VINF_SUCCESS;
981}
982
983/**
984 * Send an ACPI monitor hot-plug event.
985 *
986 * @returns VBox status code
987 * @param pInterface Pointer to the interface structure containing the
988 * called function pointer.
989 */
990static DECLCALLBACK(int) acpiR3Port_MonitorHotPlugEvent(PPDMIACPIPORT pInterface)
991{
992 ACPIState *pThis = RT_FROM_MEMBER(pInterface, ACPIState, IACPIPort);
993 DEVACPI_LOCK_R3(pThis);
994
995 apicR3UpdateGpe0(pThis, pThis->gpe0_sts | 0x4, pThis->gpe0_en);
996
997 DEVACPI_UNLOCK(pThis);
998 return VINF_SUCCESS;
999}
1000
1001/**
1002 * Send an ACPI battery status change event.
1003 *
1004 * @returns VBox status code
1005 * @param pInterface Pointer to the interface structure containing the
1006 * called function pointer.
1007 */
1008static DECLCALLBACK(int) acpiR3Port_BatteryStatusChangeEvent(PPDMIACPIPORT pInterface)
1009{
1010 ACPIState *pThis = RT_FROM_MEMBER(pInterface, ACPIState, IACPIPort);
1011 DEVACPI_LOCK_R3(pThis);
1012
1013 apicR3UpdateGpe0(pThis, pThis->gpe0_sts | 0x1, pThis->gpe0_en);
1014
1015 DEVACPI_UNLOCK(pThis);
1016 return VINF_SUCCESS;
1017}
1018
1019/**
1020 * Used by acpiR3PmTimer to re-arm the PM timer.
1021 *
1022 * The caller is expected to either hold the clock lock or to have made sure
1023 * the VM is resetting or loading state.
1024 *
1025 * @param pThis The ACPI instance.
1026 * @param uNow The current time.
1027 */
1028static void acpiR3PmTimerReset(ACPIState *pThis, uint64_t uNow)
1029{
1030 uint64_t uTimerFreq = TMTimerGetFreq(pThis->CTX_SUFF(pPmTimer));
1031 uint32_t uPmTmrCyclesToRollover = TMR_VAL_MSB - (pThis->uPmTimerVal & (TMR_VAL_MSB - 1));
1032 uint64_t uInterval = ASMMultU64ByU32DivByU32(uPmTmrCyclesToRollover, uTimerFreq, PM_TMR_FREQ);
1033 TMTimerSet(pThis->pPmTimerR3, uNow + uInterval + 1);
1034 Log(("acpi: uInterval = %RU64\n", uInterval));
1035}
1036
1037#endif
1038
1039/**
1040 * Used by acpiR3PMTimer & acpiPmTmrRead to update TMR_VAL and update TMR_STS
1041 *
1042 * The caller is expected to either hold the clock lock or to have made sure
1043 * the VM is resetting or loading state.
1044 *
1045 * @param pThis The ACPI instance
1046 * @param u64Now The current time
1047 */
1048
1049static void acpiPmTimerUpdate(ACPIState *pThis, uint64_t u64Now)
1050{
1051 uint32_t msb = pThis->uPmTimerVal & TMR_VAL_MSB;
1052 uint64_t u64Elapsed = u64Now - pThis->u64PmTimerInitial;
1053 Assert(TMTimerIsLockOwner(pThis->CTX_SUFF(pPmTimer)));
1054
1055 pThis->uPmTimerVal = ASMMultU64ByU32DivByU32(u64Elapsed, PM_TMR_FREQ, TMTimerGetFreq(pThis->CTX_SUFF(pPmTimer))) & TMR_VAL_MASK;
1056
1057 if ( (pThis->uPmTimerVal & TMR_VAL_MSB) != msb)
1058 {
1059 apicUpdatePm1a(pThis, pThis->pm1a_sts | TMR_STS, pThis->pm1a_en);
1060 }
1061}
1062
1063#ifdef IN_RING3
1064
1065/**
1066 * @callback_method_impl{FNTMTIMERDEV, PM Timer callback}
1067 */
1068static DECLCALLBACK(void) acpiR3PmTimer(PPDMDEVINS pDevIns, PTMTIMER pTimer, void *pvUser)
1069{
1070 ACPIState *pThis = (ACPIState *)pvUser;
1071 Assert(TMTimerIsLockOwner(pTimer));
1072 NOREF(pDevIns);
1073
1074 DEVACPI_LOCK_R3(pThis);
1075 Log(("acpi: pm timer sts %#x (%d), en %#x (%d)\n",
1076 pThis->pm1a_sts, (pThis->pm1a_sts & TMR_STS) != 0,
1077 pThis->pm1a_en, (pThis->pm1a_en & TMR_EN) != 0));
1078 uint64_t u64Now = TMTimerGet(pTimer);
1079 acpiPmTimerUpdate(pThis, u64Now);
1080 DEVACPI_UNLOCK(pThis);
1081
1082 acpiR3PmTimerReset(pThis, u64Now);
1083}
1084
1085/**
1086 * _BST method - used by acpiR3BatDataRead to implement BAT_STATUS_STATE and
1087 * acpiR3LoadState.
1088 *
1089 * @returns VINF_SUCCESS.
1090 * @param pThis The ACPI instance.
1091 */
1092static int acpiR3FetchBatteryStatus(ACPIState *pThis)
1093{
1094 uint32_t *p = pThis->au8BatteryInfo;
1095 bool fPresent; /* battery present? */
1096 PDMACPIBATCAPACITY hostRemainingCapacity; /* 0..100 */
1097 PDMACPIBATSTATE hostBatteryState; /* bitfield */
1098 uint32_t hostPresentRate; /* 0..1000 */
1099 int rc;
1100
1101 if (!pThis->pDrv)
1102 return VINF_SUCCESS;
1103 rc = pThis->pDrv->pfnQueryBatteryStatus(pThis->pDrv, &fPresent, &hostRemainingCapacity,
1104 &hostBatteryState, &hostPresentRate);
1105 AssertRC(rc);
1106
1107 /* default values */
1108 p[BAT_STATUS_STATE] = hostBatteryState;
1109 p[BAT_STATUS_PRESENT_RATE] = hostPresentRate == ~0U ? 0xFFFFFFFF
1110 : hostPresentRate * 50; /* mW */
1111 p[BAT_STATUS_REMAINING_CAPACITY] = 50000; /* mWh */
1112 p[BAT_STATUS_PRESENT_VOLTAGE] = 10000; /* mV */
1113
1114 /* did we get a valid battery state? */
1115 if (hostRemainingCapacity != PDM_ACPI_BAT_CAPACITY_UNKNOWN)
1116 p[BAT_STATUS_REMAINING_CAPACITY] = hostRemainingCapacity * 500; /* mWh */
1117 if (hostBatteryState == PDM_ACPI_BAT_STATE_CHARGED)
1118 p[BAT_STATUS_PRESENT_RATE] = 0; /* mV */
1119
1120 return VINF_SUCCESS;
1121}
1122
1123/**
1124 * _BIF method - used by acpiR3BatDataRead to implement BAT_INFO_UNITS and
1125 * acpiR3LoadState.
1126 *
1127 * @returns VINF_SUCCESS.
1128 * @param pThis The ACPI instance.
1129 */
1130static int acpiR3FetchBatteryInfo(ACPIState *pThis)
1131{
1132 uint32_t *p = pThis->au8BatteryInfo;
1133
1134 p[BAT_INFO_UNITS] = 0; /* mWh */
1135 p[BAT_INFO_DESIGN_CAPACITY] = 50000; /* mWh */
1136 p[BAT_INFO_LAST_FULL_CHARGE_CAPACITY] = 50000; /* mWh */
1137 p[BAT_INFO_TECHNOLOGY] = BAT_TECH_PRIMARY;
1138 p[BAT_INFO_DESIGN_VOLTAGE] = 10000; /* mV */
1139 p[BAT_INFO_DESIGN_CAPACITY_OF_WARNING] = 100; /* mWh */
1140 p[BAT_INFO_DESIGN_CAPACITY_OF_LOW] = 50; /* mWh */
1141 p[BAT_INFO_CAPACITY_GRANULARITY_1] = 1; /* mWh */
1142 p[BAT_INFO_CAPACITY_GRANULARITY_2] = 1; /* mWh */
1143
1144 return VINF_SUCCESS;
1145}
1146
1147/**
1148 * The _STA method - used by acpiR3BatDataRead to implement BAT_DEVICE_STATUS.
1149 *
1150 * @returns status mask or 0.
1151 * @param pThis The ACPI instance.
1152 */
1153static uint32_t acpiR3GetBatteryDeviceStatus(ACPIState *pThis)
1154{
1155 bool fPresent; /* battery present? */
1156 PDMACPIBATCAPACITY hostRemainingCapacity; /* 0..100 */
1157 PDMACPIBATSTATE hostBatteryState; /* bitfield */
1158 uint32_t hostPresentRate; /* 0..1000 */
1159 int rc;
1160
1161 if (!pThis->pDrv)
1162 return 0;
1163 rc = pThis->pDrv->pfnQueryBatteryStatus(pThis->pDrv, &fPresent, &hostRemainingCapacity,
1164 &hostBatteryState, &hostPresentRate);
1165 AssertRC(rc);
1166
1167 return fPresent
1168 ? STA_DEVICE_PRESENT_MASK /* present */
1169 | STA_DEVICE_ENABLED_MASK /* enabled and decodes its resources */
1170 | STA_DEVICE_SHOW_IN_UI_MASK /* should be shown in UI */
1171 | STA_DEVICE_FUNCTIONING_PROPERLY_MASK /* functioning properly */
1172 | STA_BATTERY_PRESENT_MASK /* battery is present */
1173 : 0; /* device not present */
1174}
1175
1176/**
1177 * Used by acpiR3BatDataRead to implement BAT_POWER_SOURCE.
1178 *
1179 * @returns status.
1180 * @param pThis The ACPI instance.
1181 */
1182static uint32_t acpiR3GetPowerSource(ACPIState *pThis)
1183{
1184 /* query the current power source from the host driver */
1185 if (!pThis->pDrv)
1186 return AC_ONLINE;
1187
1188 PDMACPIPOWERSOURCE ps;
1189 int rc = pThis->pDrv->pfnQueryPowerSource(pThis->pDrv, &ps);
1190 AssertRC(rc);
1191 return ps == PDM_ACPI_POWER_SOURCE_BATTERY ? AC_OFFLINE : AC_ONLINE;
1192}
1193
1194/**
1195 * @callback_method_impl{FNIOMIOPORTOUT, Battery status index}
1196 */
1197PDMBOTHCBDECL(int) acpiR3BatIndexWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1198{
1199 Log(("acpiR3BatIndexWrite: %#x (%#x)\n", u32, u32 >> 2));
1200 if (cb != 4)
1201 return PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x\n", cb, Port, u32);
1202
1203 ACPIState *pThis = (ACPIState *)pvUser;
1204 DEVACPI_LOCK_R3(pThis);
1205
1206 u32 >>= pThis->u8IndexShift;
1207 /* see comment at the declaration of u8IndexShift */
1208 if (pThis->u8IndexShift == 0 && u32 == (BAT_DEVICE_STATUS << 2))
1209 {
1210 pThis->u8IndexShift = 2;
1211 u32 >>= 2;
1212 }
1213 Assert(u32 < BAT_INDEX_LAST);
1214 pThis->uBatteryIndex = u32;
1215
1216 DEVACPI_UNLOCK(pThis);
1217 return VINF_SUCCESS;
1218}
1219
1220/**
1221 * @callback_method_impl{FNIOMIOPORTIN, Battery status data}
1222 */
1223PDMBOTHCBDECL(int) acpiR3BatDataRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb)
1224{
1225 if (cb != 4)
1226 return VERR_IOM_IOPORT_UNUSED;
1227
1228 ACPIState *pThis = (ACPIState *)pvUser;
1229 DEVACPI_LOCK_R3(pThis);
1230
1231 int rc = VINF_SUCCESS;
1232 switch (pThis->uBatteryIndex)
1233 {
1234 case BAT_STATUS_STATE:
1235 acpiR3FetchBatteryStatus(pThis);
1236 /* fall thru */
1237 case BAT_STATUS_PRESENT_RATE:
1238 case BAT_STATUS_REMAINING_CAPACITY:
1239 case BAT_STATUS_PRESENT_VOLTAGE:
1240 *pu32 = pThis->au8BatteryInfo[pThis->uBatteryIndex];
1241 break;
1242
1243 case BAT_INFO_UNITS:
1244 acpiR3FetchBatteryInfo(pThis);
1245 /* fall thru */
1246 case BAT_INFO_DESIGN_CAPACITY:
1247 case BAT_INFO_LAST_FULL_CHARGE_CAPACITY:
1248 case BAT_INFO_TECHNOLOGY:
1249 case BAT_INFO_DESIGN_VOLTAGE:
1250 case BAT_INFO_DESIGN_CAPACITY_OF_WARNING:
1251 case BAT_INFO_DESIGN_CAPACITY_OF_LOW:
1252 case BAT_INFO_CAPACITY_GRANULARITY_1:
1253 case BAT_INFO_CAPACITY_GRANULARITY_2:
1254 *pu32 = pThis->au8BatteryInfo[pThis->uBatteryIndex];
1255 break;
1256
1257 case BAT_DEVICE_STATUS:
1258 *pu32 = acpiR3GetBatteryDeviceStatus(pThis);
1259 break;
1260
1261 case BAT_POWER_SOURCE:
1262 *pu32 = acpiR3GetPowerSource(pThis);
1263 break;
1264
1265 default:
1266 rc = PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u idx=%u\n", cb, Port, pThis->uBatteryIndex);
1267 *pu32 = UINT32_MAX;
1268 break;
1269 }
1270
1271 DEVACPI_UNLOCK(pThis);
1272 return rc;
1273}
1274
1275/**
1276 * @callback_method_impl{FNIOMIOPORTOUT, System info index}
1277 */
1278PDMBOTHCBDECL(int) acpiR3SysInfoIndexWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1279{
1280 Log(("acpiR3SysInfoIndexWrite: %#x (%#x)\n", u32, u32 >> 2));
1281 if (cb != 4)
1282 return PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x\n", cb, Port, u32);
1283
1284 ACPIState *pThis = (ACPIState *)pvUser;
1285 DEVACPI_LOCK_R3(pThis);
1286
1287 if (u32 == SYSTEM_INFO_INDEX_VALID || u32 == SYSTEM_INFO_INDEX_INVALID)
1288 pThis->uSystemInfoIndex = u32;
1289 else
1290 {
1291 /* see comment at the declaration of u8IndexShift */
1292 if (u32 > SYSTEM_INFO_INDEX_END && pThis->u8IndexShift == 0)
1293 {
1294 if ((u32 >> 2) < SYSTEM_INFO_INDEX_END && (u32 & 0x3) == 0)
1295 pThis->u8IndexShift = 2;
1296 }
1297
1298 u32 >>= pThis->u8IndexShift;
1299 Assert(u32 < SYSTEM_INFO_INDEX_END);
1300 pThis->uSystemInfoIndex = u32;
1301 }
1302
1303 DEVACPI_UNLOCK(pThis);
1304 return VINF_SUCCESS;
1305}
1306
1307/**
1308 * @callback_method_impl{FNIOMIOPORTIN, System info data}
1309 */
1310PDMBOTHCBDECL(int) acpiR3SysInfoDataRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb)
1311{
1312 if (cb != 4)
1313 return VERR_IOM_IOPORT_UNUSED;
1314
1315 ACPIState *pThis = (ACPIState *)pvUser;
1316 DEVACPI_LOCK_R3(pThis);
1317
1318 int rc = VINF_SUCCESS;
1319 uint32_t const uSystemInfoIndex = pThis->uSystemInfoIndex;
1320 switch (uSystemInfoIndex)
1321 {
1322 case SYSTEM_INFO_INDEX_LOW_MEMORY_LENGTH:
1323 *pu32 = pThis->cbRamLow;
1324 break;
1325
1326 case SYSTEM_INFO_INDEX_HIGH_MEMORY_LENGTH:
1327 *pu32 = pThis->cbRamHigh >> 16; /* 64KB units */
1328 Assert(((uint64_t)*pu32 << 16) == pThis->cbRamHigh);
1329 break;
1330
1331 case SYSTEM_INFO_INDEX_USE_IOAPIC:
1332 *pu32 = pThis->u8UseIOApic;
1333 break;
1334
1335 case SYSTEM_INFO_INDEX_HPET_STATUS:
1336 *pu32 = pThis->fUseHpet
1337 ? ( STA_DEVICE_PRESENT_MASK
1338 | STA_DEVICE_ENABLED_MASK
1339 | STA_DEVICE_SHOW_IN_UI_MASK
1340 | STA_DEVICE_FUNCTIONING_PROPERLY_MASK)
1341 : 0;
1342 break;
1343
1344 case SYSTEM_INFO_INDEX_SMC_STATUS:
1345 *pu32 = pThis->fUseSmc
1346 ? ( STA_DEVICE_PRESENT_MASK
1347 | STA_DEVICE_ENABLED_MASK
1348 /* no need to show this device in the UI */
1349 | STA_DEVICE_FUNCTIONING_PROPERLY_MASK)
1350 : 0;
1351 break;
1352
1353 case SYSTEM_INFO_INDEX_FDC_STATUS:
1354 *pu32 = pThis->fUseFdc
1355 ? ( STA_DEVICE_PRESENT_MASK
1356 | STA_DEVICE_ENABLED_MASK
1357 | STA_DEVICE_SHOW_IN_UI_MASK
1358 | STA_DEVICE_FUNCTIONING_PROPERLY_MASK)
1359 : 0;
1360 break;
1361
1362 case SYSTEM_INFO_INDEX_NIC_ADDRESS:
1363 *pu32 = pThis->u32NicPciAddress;
1364 break;
1365
1366 case SYSTEM_INFO_INDEX_AUDIO_ADDRESS:
1367 *pu32 = pThis->u32AudioPciAddress;
1368 break;
1369
1370 case SYSTEM_INFO_INDEX_POWER_STATES:
1371 *pu32 = RT_BIT(0) | RT_BIT(5); /* S1 and S5 always exposed */
1372 if (pThis->fS1Enabled) /* Optionally expose S1 and S4 */
1373 *pu32 |= RT_BIT(1);
1374 if (pThis->fS4Enabled)
1375 *pu32 |= RT_BIT(4);
1376 break;
1377
1378 case SYSTEM_INFO_INDEX_IOC_ADDRESS:
1379 *pu32 = pThis->u32IocPciAddress;
1380 break;
1381
1382 case SYSTEM_INFO_INDEX_HBC_ADDRESS:
1383 *pu32 = pThis->u32HbcPciAddress;
1384 break;
1385
1386 case SYSTEM_INFO_INDEX_PCI_BASE:
1387 /** @todo couldn't MCFG be in 64-bit range? */
1388 Assert(pThis->u64PciConfigMMioAddress < 0xffffffff);
1389 *pu32 = (uint32_t)pThis->u64PciConfigMMioAddress;
1390 break;
1391
1392 case SYSTEM_INFO_INDEX_PCI_LENGTH:
1393 /** @todo couldn't MCFG be in 64-bit range? */
1394 Assert(pThis->u64PciConfigMMioLength < 0xffffffff);
1395 *pu32 = (uint32_t)pThis->u64PciConfigMMioLength;
1396 break;
1397
1398 case SYSTEM_INFO_INDEX_RTC_STATUS:
1399 *pu32 = pThis->fShowRtc
1400 ? ( STA_DEVICE_PRESENT_MASK
1401 | STA_DEVICE_ENABLED_MASK
1402 | STA_DEVICE_SHOW_IN_UI_MASK
1403 | STA_DEVICE_FUNCTIONING_PROPERLY_MASK)
1404 : 0;
1405 break;
1406
1407 case SYSTEM_INFO_INDEX_CPU_LOCKED:
1408 if (pThis->idCpuLockCheck < VMM_MAX_CPU_COUNT)
1409 {
1410 *pu32 = VMCPUSET_IS_PRESENT(&pThis->CpuSetLocked, pThis->idCpuLockCheck);
1411 pThis->idCpuLockCheck = UINT32_C(0xffffffff); /* Make the entry invalid */
1412 }
1413 else
1414 {
1415 rc = PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "CPU lock check protocol violation (idCpuLockCheck=%#x)\n",
1416 pThis->idCpuLockCheck);
1417 /* Always return locked status just to be safe */
1418 *pu32 = 1;
1419 }
1420 break;
1421
1422 case SYSTEM_INFO_INDEX_CPU_EVENT_TYPE:
1423 *pu32 = pThis->u32CpuEventType;
1424 break;
1425
1426 case SYSTEM_INFO_INDEX_CPU_EVENT:
1427 *pu32 = pThis->u32CpuEvent;
1428 break;
1429
1430 case SYSTEM_INFO_INDEX_SERIAL0_IOBASE:
1431 *pu32 = pThis->uSerial0IoPortBase;
1432 break;
1433
1434 case SYSTEM_INFO_INDEX_SERIAL0_IRQ:
1435 *pu32 = pThis->uSerial0Irq;
1436 break;
1437
1438 case SYSTEM_INFO_INDEX_SERIAL1_IOBASE:
1439 *pu32 = pThis->uSerial1IoPortBase;
1440 break;
1441
1442 case SYSTEM_INFO_INDEX_SERIAL1_IRQ:
1443 *pu32 = pThis->uSerial1Irq;
1444 break;
1445
1446 case SYSTEM_INFO_INDEX_SERIAL2_IOBASE:
1447 *pu32 = pThis->uSerial2IoPortBase;
1448 break;
1449
1450 case SYSTEM_INFO_INDEX_SERIAL2_IRQ:
1451 *pu32 = pThis->uSerial2Irq;
1452 break;
1453
1454 case SYSTEM_INFO_INDEX_SERIAL3_IOBASE:
1455 *pu32 = pThis->uSerial3IoPortBase;
1456 break;
1457
1458 case SYSTEM_INFO_INDEX_SERIAL3_IRQ:
1459 *pu32 = pThis->uSerial3Irq;
1460 break;
1461
1462 case SYSTEM_INFO_INDEX_PARALLEL0_IOBASE:
1463 *pu32 = pThis->uParallel0IoPortBase;
1464 break;
1465
1466 case SYSTEM_INFO_INDEX_PARALLEL0_IRQ:
1467 *pu32 = pThis->uParallel0Irq;
1468 break;
1469
1470 case SYSTEM_INFO_INDEX_PARALLEL1_IOBASE:
1471 *pu32 = pThis->uParallel1IoPortBase;
1472 break;
1473
1474 case SYSTEM_INFO_INDEX_PARALLEL1_IRQ:
1475 *pu32 = pThis->uParallel1Irq;
1476 break;
1477
1478 case SYSTEM_INFO_INDEX_END:
1479 /** @todo why isn't this setting any output value? */
1480 break;
1481
1482 /* Solaris 9 tries to read from this index */
1483 case SYSTEM_INFO_INDEX_INVALID:
1484 *pu32 = 0;
1485 break;
1486
1487 default:
1488 *pu32 = UINT32_MAX;
1489 rc = PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u idx=%u\n", cb, Port, pThis->uBatteryIndex);
1490 break;
1491 }
1492
1493 DEVACPI_UNLOCK(pThis);
1494 Log(("acpiR3SysInfoDataRead: idx=%d val=%#x (%d) rc=%Rrc\n", uSystemInfoIndex, *pu32, *pu32, rc));
1495 return rc;
1496}
1497
1498/**
1499 * @callback_method_impl{FNIOMIOPORTOUT, System info data}
1500 */
1501PDMBOTHCBDECL(int) acpiR3SysInfoDataWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1502{
1503 ACPIState *pThis = (ACPIState *)pvUser;
1504 if (cb != 4)
1505 return PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x idx=%u\n", cb, Port, u32, pThis->uSystemInfoIndex);
1506
1507 DEVACPI_LOCK_R3(pThis);
1508 Log(("addr=%#x cb=%d u32=%#x si=%#x\n", Port, cb, u32, pThis->uSystemInfoIndex));
1509
1510 int rc = VINF_SUCCESS;
1511 switch (pThis->uSystemInfoIndex)
1512 {
1513 case SYSTEM_INFO_INDEX_INVALID:
1514 AssertMsg(u32 == 0xbadc0de, ("u32=%u\n", u32));
1515 pThis->u8IndexShift = 0;
1516 break;
1517
1518 case SYSTEM_INFO_INDEX_VALID:
1519 AssertMsg(u32 == 0xbadc0de, ("u32=%u\n", u32));
1520 pThis->u8IndexShift = 2;
1521 break;
1522
1523 case SYSTEM_INFO_INDEX_CPU_LOCK_CHECK:
1524 pThis->idCpuLockCheck = u32;
1525 break;
1526
1527 case SYSTEM_INFO_INDEX_CPU_LOCKED:
1528 if (u32 < pThis->cCpus)
1529 VMCPUSET_DEL(&pThis->CpuSetLocked, u32); /* Unlock the CPU */
1530 else
1531 LogRel(("ACPI: CPU %u does not exist\n", u32));
1532 break;
1533
1534 default:
1535 rc = PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x idx=%u\n", cb, Port, u32, pThis->uSystemInfoIndex);
1536 break;
1537 }
1538
1539 DEVACPI_UNLOCK(pThis);
1540 return rc;
1541}
1542
1543/**
1544 * @callback_method_impl{FNIOMIOPORTIN, PM1a Enable}
1545 */
1546PDMBOTHCBDECL(int) acpiR3Pm1aEnRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb)
1547{
1548 NOREF(pDevIns); NOREF(Port);
1549 if (cb != 2)
1550 return VERR_IOM_IOPORT_UNUSED;
1551
1552 ACPIState *pThis = (ACPIState *)pvUser;
1553 DEVACPI_LOCK_R3(pThis);
1554
1555 *pu32 = pThis->pm1a_en;
1556
1557 DEVACPI_UNLOCK(pThis);
1558 Log(("acpiR3Pm1aEnRead -> %#x\n", *pu32));
1559 return VINF_SUCCESS;
1560}
1561
1562/**
1563 * @callback_method_impl{FNIOMIOPORTOUT, PM1a Enable}
1564 */
1565PDMBOTHCBDECL(int) acpiR3PM1aEnWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1566{
1567 if (cb != 2 && cb != 4)
1568 return PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x\n", cb, Port, u32);
1569
1570 ACPIState *pThis = (ACPIState *)pvUser;
1571 DEVACPI_LOCK_R3(pThis);
1572
1573 Log(("acpiR3PM1aEnWrite: %#x (%#x)\n", u32, u32 & ~(RSR_EN | IGN_EN) & 0xffff));
1574 u32 &= ~(RSR_EN | IGN_EN);
1575 u32 &= 0xffff;
1576 apicUpdatePm1a(pThis, pThis->pm1a_sts, u32);
1577
1578 DEVACPI_UNLOCK(pThis);
1579 return VINF_SUCCESS;
1580}
1581
1582/**
1583 * @callback_method_impl{FNIOMIOPORTIN, PM1a Status}
1584 */
1585PDMBOTHCBDECL(int) acpiR3Pm1aStsRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb)
1586{
1587 if (cb != 2)
1588 {
1589 int rc = PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u\n", cb, Port);
1590 return rc == VINF_SUCCESS ? VERR_IOM_IOPORT_UNUSED : rc;
1591 }
1592
1593 ACPIState *pThis = (ACPIState *)pvUser;
1594 DEVACPI_LOCK_R3(pThis);
1595
1596 *pu32 = pThis->pm1a_sts;
1597
1598 DEVACPI_UNLOCK(pThis);
1599 Log(("acpiR3Pm1aStsRead: %#x\n", *pu32));
1600 return VINF_SUCCESS;
1601}
1602
1603/**
1604 * @callback_method_impl{FNIOMIOPORTOUT, PM1a Status}
1605 */
1606PDMBOTHCBDECL(int) acpiR3PM1aStsWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1607{
1608 if (cb != 2 && cb != 4)
1609 return PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x\n", cb, Port, u32);
1610
1611 ACPIState *pThis = (ACPIState *)pvUser;
1612 DEVACPI_LOCK_R3(pThis);
1613
1614 Log(("acpiR3PM1aStsWrite: %#x (%#x)\n", u32, u32 & ~(RSR_STS | IGN_STS) & 0xffff));
1615 u32 &= 0xffff;
1616 if (u32 & PWRBTN_STS)
1617 pThis->fPowerButtonHandled = true; /* Remember that the guest handled the last power button event */
1618 u32 = pThis->pm1a_sts & ~(u32 & ~(RSR_STS | IGN_STS));
1619 apicUpdatePm1a(pThis, u32, pThis->pm1a_en);
1620
1621 DEVACPI_UNLOCK(pThis);
1622 return VINF_SUCCESS;
1623}
1624
1625/**
1626 * @callback_method_impl{FNIOMIOPORTIN, PM1a Control}
1627 */
1628PDMBOTHCBDECL(int) acpiR3Pm1aCtlRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb)
1629{
1630 if (cb != 2)
1631 {
1632 int rc = PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u\n", cb, Port);
1633 return rc == VINF_SUCCESS ? VERR_IOM_IOPORT_UNUSED : rc;
1634 }
1635
1636 ACPIState *pThis = (ACPIState *)pvUser;
1637 DEVACPI_LOCK_R3(pThis);
1638
1639 *pu32 = pThis->pm1a_ctl;
1640
1641 DEVACPI_UNLOCK(pThis);
1642 Log(("acpiR3Pm1aCtlRead: %#x\n", *pu32));
1643 return VINF_SUCCESS;
1644}
1645
1646/**
1647 * @callback_method_impl{FNIOMIOPORTOUT, PM1a Control}
1648 */
1649PDMBOTHCBDECL(int) acpiR3PM1aCtlWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1650{
1651 if (cb != 2 && cb != 4)
1652 return PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x\n", cb, Port, u32);
1653
1654 ACPIState *pThis = (ACPIState *)pvUser;
1655 DEVACPI_LOCK_R3(pThis);
1656
1657 Log(("acpiR3PM1aCtlWrite: %#x (%#x)\n", u32, u32 & ~(RSR_CNT | IGN_CNT) & 0xffff));
1658 u32 &= 0xffff;
1659 pThis->pm1a_ctl = u32 & ~(RSR_CNT | IGN_CNT);
1660
1661 int rc = VINF_SUCCESS;
1662 uint32_t const uSleepState = (pThis->pm1a_ctl >> SLP_TYPx_SHIFT) & SLP_TYPx_MASK;
1663 if (uSleepState != pThis->uSleepState)
1664 {
1665 pThis->uSleepState = uSleepState;
1666 switch (uSleepState)
1667 {
1668 case 0x00: /* S0 */
1669 break;
1670
1671 case 0x01: /* S1 */
1672 if (pThis->fS1Enabled)
1673 {
1674 LogRel(("ACPI: Entering S1 power state (powered-on suspend)\n"));
1675 rc = acpiR3DoSleep(pThis);
1676 break;
1677 }
1678 LogRel(("ACPI: Ignoring guest attempt to enter S1 power state (powered-on suspend)!\n"));
1679 /* fall thru */
1680
1681 case 0x04: /* S4 */
1682 if (pThis->fS4Enabled)
1683 {
1684 LogRel(("ACPI: Entering S4 power state (suspend to disk)\n"));
1685 rc = acpiR3DoPowerOff(pThis);/* Same behavior as S5 */
1686 break;
1687 }
1688 LogRel(("ACPI: Ignoring guest attempt to enter S4 power state (suspend to disk)!\n"));
1689 /* fall thru */
1690
1691 case 0x05: /* S5 */
1692 LogRel(("ACPI: Entering S5 power state (power down)\n"));
1693 rc = acpiR3DoPowerOff(pThis);
1694 break;
1695
1696 default:
1697 rc = PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "Unknown sleep state %#x (u32=%#x)\n", uSleepState, u32);
1698 break;
1699 }
1700 }
1701
1702 DEVACPI_UNLOCK(pThis);
1703 Log(("acpiR3PM1aCtlWrite: rc=%Rrc\n", rc));
1704 return rc;
1705}
1706
1707#endif /* IN_RING3 */
1708
1709/**
1710 * @callback_method_impl{FNIOMIOPORTIN, PMTMR}
1711 *
1712 * @remarks Only I/O port currently implemented in all contexts.
1713 */
1714PDMBOTHCBDECL(int) acpiPMTmrRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb)
1715{
1716 if (cb != 4)
1717 return VERR_IOM_IOPORT_UNUSED;
1718
1719 ACPIState *pThis = PDMINS_2_DATA(pDevIns, ACPIState *);
1720
1721 /*
1722 * We use the clock lock to serialize access to u64PmTimerInitial and to
1723 * make sure we get a reliable time from the clock
1724 * as well as and to prevent uPmTimerVal from being updated during read.
1725 */
1726
1727 int rc = TMTimerLock(pThis->CTX_SUFF(pPmTimer), VINF_IOM_R3_IOPORT_READ);
1728 if (rc != VINF_SUCCESS)
1729 return rc;
1730
1731 rc = PDMCritSectEnter(&pThis->CritSect, VINF_IOM_R3_IOPORT_READ);
1732 if (rc != VINF_SUCCESS)
1733 {
1734 TMTimerUnlock(pThis->CTX_SUFF(pPmTimer));
1735 return rc;
1736 }
1737
1738 uint64_t u64Now = TMTimerGet(pThis->CTX_SUFF(pPmTimer));
1739 acpiPmTimerUpdate(pThis, u64Now);
1740 *pu32 = pThis->uPmTimerVal;
1741
1742 DEVACPI_UNLOCK(pThis);
1743 TMTimerUnlock(pThis->CTX_SUFF(pPmTimer));
1744
1745 DBGFTRACE_PDM_U64_TAG(pDevIns, u64Now, "acpi");
1746 Log(("acpi: acpiPMTmrRead -> %#x\n", *pu32));
1747
1748 NOREF(pvUser); NOREF(Port);
1749 return rc;
1750}
1751
1752#ifdef IN_RING3
1753
1754/**
1755 * @callback_method_impl{FNIOMIOPORTIN, GPE0 Status}
1756 */
1757PDMBOTHCBDECL(int) acpiR3Gpe0StsRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb)
1758{
1759 if (cb != 1)
1760 {
1761 int rc = PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u\n", cb, Port);
1762 return rc == VINF_SUCCESS ? VERR_IOM_IOPORT_UNUSED : rc;
1763 }
1764
1765 ACPIState *pThis = (ACPIState *)pvUser;
1766 DEVACPI_LOCK_R3(pThis);
1767
1768 *pu32 = pThis->gpe0_sts & 0xff;
1769
1770 DEVACPI_UNLOCK(pThis);
1771 Log(("acpiR3Gpe0StsRead: %#x\n", *pu32));
1772 return VINF_SUCCESS;
1773}
1774
1775/**
1776 * @callback_method_impl{FNIOMIOPORTOUT, GPE0 Status}
1777 */
1778PDMBOTHCBDECL(int) acpiR3Gpe0StsWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1779{
1780 if (cb != 1)
1781 return PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x\n", cb, Port, u32);
1782
1783 ACPIState *pThis = (ACPIState *)pvUser;
1784 DEVACPI_LOCK_R3(pThis);
1785
1786 Log(("acpiR3Gpe0StsWrite: %#x (%#x)\n", u32, pThis->gpe0_sts & ~u32));
1787 u32 = pThis->gpe0_sts & ~u32;
1788 apicR3UpdateGpe0(pThis, u32, pThis->gpe0_en);
1789
1790 DEVACPI_UNLOCK(pThis);
1791 return VINF_SUCCESS;
1792}
1793
1794/**
1795 * @callback_method_impl{FNIOMIOPORTIN, GPE0 Enable}
1796 */
1797PDMBOTHCBDECL(int) acpiR3Gpe0EnRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb)
1798{
1799 if (cb != 1)
1800 {
1801 int rc = PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u\n", cb, Port);
1802 return rc == VINF_SUCCESS ? VERR_IOM_IOPORT_UNUSED : rc;
1803 }
1804
1805 ACPIState *pThis = (ACPIState *)pvUser;
1806 DEVACPI_LOCK_R3(pThis);
1807
1808 *pu32 = pThis->gpe0_en & 0xff;
1809
1810 DEVACPI_UNLOCK(pThis);
1811 Log(("acpiR3Gpe0EnRead: %#x\n", *pu32));
1812 return VINF_SUCCESS;
1813}
1814
1815/**
1816 * @callback_method_impl{FNIOMIOPORTOUT, GPE0 Enable}
1817 */
1818PDMBOTHCBDECL(int) acpiR3Gpe0EnWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1819{
1820 if (cb != 1)
1821 return PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x\n", cb, Port, u32);
1822
1823 ACPIState *pThis = (ACPIState *)pvUser;
1824 DEVACPI_LOCK_R3(pThis);
1825
1826 Log(("acpiR3Gpe0EnWrite: %#x\n", u32));
1827 apicR3UpdateGpe0(pThis, pThis->gpe0_sts, u32);
1828
1829 DEVACPI_UNLOCK(pThis);
1830 return VINF_SUCCESS;
1831}
1832
1833/**
1834 * @callback_method_impl{FNIOMIOPORTOUT, SMI_CMD}
1835 */
1836PDMBOTHCBDECL(int) acpiR3SmiWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1837{
1838 Log(("acpiR3SmiWrite %#x\n", u32));
1839 if (cb != 1)
1840 return PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x\n", cb, Port, u32);
1841
1842 ACPIState *pThis = (ACPIState *)pvUser;
1843 DEVACPI_LOCK_R3(pThis);
1844
1845 if (u32 == ACPI_ENABLE)
1846 pThis->pm1a_ctl |= SCI_EN;
1847 else if (u32 == ACPI_DISABLE)
1848 pThis->pm1a_ctl &= ~SCI_EN;
1849 else
1850 Log(("acpiR3SmiWrite: %#x <- unknown value\n", u32));
1851
1852 DEVACPI_UNLOCK(pThis);
1853 return VINF_SUCCESS;
1854}
1855
1856/**
1857 * @{FNIOMIOPORTOUT, ACPI_RESET_BLK}
1858 */
1859PDMBOTHCBDECL(int) acpiR3ResetWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1860{
1861 Log(("acpiR3ResetWrite: %#x\n", u32));
1862 NOREF(pvUser);
1863 if (cb != 1)
1864 return PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x\n", cb, Port, u32);
1865
1866 /* No state locking required. */
1867 int rc = VINF_SUCCESS;
1868 if (u32 == ACPI_RESET_REG_VAL)
1869 {
1870 LogRel(("ACPI: Reset initiated by ACPI\n"));
1871 rc = PDMDevHlpVMReset(pDevIns, PDMVMRESET_F_ACPI);
1872 }
1873 else
1874 Log(("acpiR3ResetWrite: %#x <- unknown value\n", u32));
1875
1876 return rc;
1877}
1878
1879# ifdef DEBUG_ACPI
1880
1881/**
1882 * @callback_method_impl{FNIOMIOPORTOUT, Debug hex value logger}
1883 */
1884PDMBOTHCBDECL(int) acpiR3DhexWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1885{
1886 NOREF(pvUser);
1887 switch (cb)
1888 {
1889 case 1:
1890 Log(("%#x\n", u32 & 0xff));
1891 break;
1892 case 2:
1893 Log(("%#6x\n", u32 & 0xffff));
1894 case 4:
1895 Log(("%#10x\n", u32));
1896 break;
1897 default:
1898 return PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x\n", cb, Port, u32);
1899 }
1900 return VINF_SUCCESS;
1901}
1902
1903/**
1904 * @callback_method_impl{FNIOMIOPORTOUT, Debug char logger}
1905 */
1906PDMBOTHCBDECL(int) acpiR3DchrWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1907{
1908 NOREF(pvUser);
1909 switch (cb)
1910 {
1911 case 1:
1912 Log(("%c", u32 & 0xff));
1913 break;
1914 default:
1915 return PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x\n", cb, Port, u32);
1916 }
1917 return VINF_SUCCESS;
1918}
1919
1920# endif /* DEBUG_ACPI */
1921
1922/**
1923 * Called by acpiR3Reset and acpiR3Construct to set up the PM PCI config space.
1924 *
1925 * @param pThis The ACPI instance.
1926 */
1927static void acpiR3PmPCIBIOSFake(ACPIState *pThis)
1928{
1929 pThis->dev.abConfig[PMBA ] = pThis->uPmIoPortBase | 1; /* PMBA, PM base address, bit 0 marks it as IO range */
1930 pThis->dev.abConfig[PMBA+1] = pThis->uPmIoPortBase >> 8;
1931 pThis->dev.abConfig[PMBA+2] = 0x00;
1932 pThis->dev.abConfig[PMBA+3] = 0x00;
1933}
1934
1935/**
1936 * Used to calculate the value of a PM I/O port.
1937 *
1938 * @returns The actual I/O port value.
1939 * @param pThis The ACPI instance.
1940 * @param offset The offset into the I/O space, or -1 if invalid.
1941 */
1942static RTIOPORT acpiR3CalcPmPort(ACPIState *pThis, int32_t offset)
1943{
1944 Assert(pThis->uPmIoPortBase != 0);
1945
1946 if (offset == -1)
1947 return 0;
1948
1949 return (RTIOPORT)(pThis->uPmIoPortBase + offset);
1950}
1951
1952/**
1953 * Called by acpiR3LoadState and acpiR3UpdatePmHandlers to register the PM1a, PM
1954 * timer and GPE0 I/O ports.
1955 *
1956 * @returns VBox status code.
1957 * @param pThis The ACPI instance.
1958 */
1959static int acpiR3RegisterPmHandlers(ACPIState *pThis)
1960{
1961 if (pThis->uPmIoPortBase == 0)
1962 return VINF_SUCCESS;
1963
1964#define R(offset, cnt, writer, reader, description) \
1965 do { \
1966 int rc = PDMDevHlpIOPortRegister(pThis->pDevInsR3, acpiR3CalcPmPort(pThis, offset), cnt, pThis, writer, reader, \
1967 NULL, NULL, description); \
1968 if (RT_FAILURE(rc)) \
1969 return rc; \
1970 } while (0)
1971#define L (GPE0_BLK_LEN / 2)
1972
1973 R(PM1a_EVT_OFFSET+2, 1, acpiR3PM1aEnWrite, acpiR3Pm1aEnRead, "ACPI PM1a Enable");
1974 R(PM1a_EVT_OFFSET, 1, acpiR3PM1aStsWrite, acpiR3Pm1aStsRead, "ACPI PM1a Status");
1975 R(PM1a_CTL_OFFSET, 1, acpiR3PM1aCtlWrite, acpiR3Pm1aCtlRead, "ACPI PM1a Control");
1976 R(PM_TMR_OFFSET, 1, NULL, acpiPMTmrRead, "ACPI PM Timer");
1977 R(GPE0_OFFSET + L, L, acpiR3Gpe0EnWrite, acpiR3Gpe0EnRead, "ACPI GPE0 Enable");
1978 R(GPE0_OFFSET, L, acpiR3Gpe0StsWrite, acpiR3Gpe0StsRead, "ACPI GPE0 Status");
1979#undef L
1980#undef R
1981
1982 /* register RC stuff */
1983 if (pThis->fGCEnabled)
1984 {
1985 int rc = PDMDevHlpIOPortRegisterRC(pThis->pDevInsR3, acpiR3CalcPmPort(pThis, PM_TMR_OFFSET),
1986 1, 0, NULL, "acpiPMTmrRead",
1987 NULL, NULL, "ACPI PM Timer");
1988 AssertRCReturn(rc, rc);
1989 }
1990
1991 /* register R0 stuff */
1992 if (pThis->fR0Enabled)
1993 {
1994 int rc = PDMDevHlpIOPortRegisterR0(pThis->pDevInsR3, acpiR3CalcPmPort(pThis, PM_TMR_OFFSET),
1995 1, 0, NULL, "acpiPMTmrRead",
1996 NULL, NULL, "ACPI PM Timer");
1997 AssertRCReturn(rc, rc);
1998 }
1999
2000 return VINF_SUCCESS;
2001}
2002
2003/**
2004 * Called by acpiR3LoadState and acpiR3UpdatePmHandlers to unregister the PM1a, PM
2005 * timer and GPE0 I/O ports.
2006 *
2007 * @returns VBox status code.
2008 * @param pThis The ACPI instance.
2009 */
2010static int acpiR3UnregisterPmHandlers(ACPIState *pThis)
2011{
2012 if (pThis->uPmIoPortBase == 0)
2013 return VINF_SUCCESS;
2014
2015#define U(offset, cnt) \
2016 do { \
2017 int rc = PDMDevHlpIOPortDeregister(pThis->pDevInsR3, acpiR3CalcPmPort(pThis, offset), cnt); \
2018 AssertRCReturn(rc, rc); \
2019 } while (0)
2020#define L (GPE0_BLK_LEN / 2)
2021
2022 U(PM1a_EVT_OFFSET+2, 1);
2023 U(PM1a_EVT_OFFSET, 1);
2024 U(PM1a_CTL_OFFSET, 1);
2025 U(PM_TMR_OFFSET, 1);
2026 U(GPE0_OFFSET + L, L);
2027 U(GPE0_OFFSET, L);
2028#undef L
2029#undef U
2030
2031 return VINF_SUCCESS;
2032}
2033
2034/**
2035 * Called by acpiR3PciConfigWrite and acpiReset to change the location of the
2036 * PM1a, PM timer and GPE0 ports.
2037 *
2038 * @returns VBox status code.
2039 *
2040 * @param pThis The ACPI instance.
2041 * @param NewIoPortBase The new base address of the I/O ports.
2042 */
2043static int acpiR3UpdatePmHandlers(ACPIState *pThis, RTIOPORT NewIoPortBase)
2044{
2045 Log(("acpi: rebasing PM 0x%x -> 0x%x\n", pThis->uPmIoPortBase, NewIoPortBase));
2046 if (NewIoPortBase != pThis->uPmIoPortBase)
2047 {
2048 int rc = acpiR3UnregisterPmHandlers(pThis);
2049 if (RT_FAILURE(rc))
2050 return rc;
2051
2052 pThis->uPmIoPortBase = NewIoPortBase;
2053
2054 rc = acpiR3RegisterPmHandlers(pThis);
2055 if (RT_FAILURE(rc))
2056 return rc;
2057
2058 /* We have to update FADT table acccording to the new base */
2059 rc = acpiR3PlantTables(pThis);
2060 AssertRC(rc);
2061 if (RT_FAILURE(rc))
2062 return rc;
2063 }
2064
2065 return VINF_SUCCESS;
2066}
2067
2068/**
2069 * @callback_method_impl{FNIOMIOPORTOUT, SMBus}
2070 */
2071PDMBOTHCBDECL(int) acpiR3SMBusWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
2072{
2073 ACPIState *pThis = (ACPIState *)pvUser;
2074 DEVACPI_LOCK_R3(pThis);
2075
2076 LogFunc(("Port=%#x u32=%#x cb=%u\n", Port, u32, cb));
2077 uint8_t off = Port & 0x000f;
2078 if ( (cb != 1 && off <= SMBSHDWCMD_OFF)
2079 || (cb != 2 && (off == SMBSLVEVT_OFF || off == SMBSLVDAT_OFF)))
2080 return PDMDevHlpDBGFStop(pDevIns, RT_SRC_POS, "cb=%d Port=%u u32=%#x\n", cb, Port, u32);
2081
2082 switch (off)
2083 {
2084 case SMBHSTSTS_OFF:
2085 /* Bit 0 is readonly, bits 1..4 are write clear, bits 5..7 are reserved */
2086 pThis->u8SMBusHstSts &= ~(u32 & SMBHSTSTS_INT_MASK);
2087 break;
2088 case SMBSLVSTS_OFF:
2089 /* Bit 0 is readonly, bit 1 is reserved, bits 2..5 are write clear, bits 6..7 are reserved */
2090 pThis->u8SMBusSlvSts &= ~(u32 & SMBSLVSTS_WRITE_MASK);
2091 break;
2092 case SMBHSTCNT_OFF:
2093 {
2094 Assert(PDMCritSectIsOwner(&pThis->CritSect));
2095
2096 const bool old_level = acpiSCILevel(pThis);
2097 pThis->u8SMBusHstCnt = u32 & SMBHSTCNT_WRITE_MASK;
2098 if (u32 & SMBHSTCNT_START)
2099 {
2100 /* Start, trigger error as this is a dummy implementation */
2101 pThis->u8SMBusHstSts |= SMBHSTSTS_DEV_ERR | SMBHSTSTS_INTER;
2102 }
2103 if (u32 & SMBHSTCNT_KILL)
2104 {
2105 /* Kill */
2106 pThis->u8SMBusHstSts |= SMBHSTSTS_FAILED | SMBHSTSTS_INTER;
2107 }
2108 const bool new_level = acpiSCILevel(pThis);
2109
2110 LogFunc(("old=%x new=%x\n", old_level, new_level));
2111
2112 /* This handles only SCI/IRQ9. SMI# makes not much sense today and
2113 * needs to be implemented later if it ever becomes relevant. */
2114 if (new_level != old_level)
2115 acpiSetIrq(pThis, new_level);
2116 break;
2117 }
2118 case SMBHSTCMD_OFF:
2119 pThis->u8SMBusHstCmd = u32;
2120 break;
2121 case SMBHSTADD_OFF:
2122 pThis->u8SMBusHstAdd = u32;
2123 break;
2124 case SMBHSTDAT0_OFF:
2125 pThis->u8SMBusHstDat0 = u32;
2126 break;
2127 case SMBHSTDAT1_OFF:
2128 pThis->u8SMBusHstDat1 = u32;
2129 break;
2130 case SMBBLKDAT_OFF:
2131 pThis->au8SMBusBlkDat[pThis->u8SMBusBlkIdx] = u32;
2132 pThis->u8SMBusBlkIdx++;
2133 pThis->u8SMBusBlkIdx &= sizeof(pThis->au8SMBusBlkDat) - 1;
2134 break;
2135 case SMBSLVCNT_OFF:
2136 pThis->u8SMBusSlvCnt = u32 & SMBSLVCNT_WRITE_MASK;
2137 break;
2138 case SMBSHDWCMD_OFF:
2139 /* readonly register */
2140 break;
2141 case SMBSLVEVT_OFF:
2142 pThis->u16SMBusSlvEvt = u32;
2143 break;
2144 case SMBSLVDAT_OFF:
2145 /* readonly register */
2146 break;
2147 default:
2148 /* caught by the sanity check above */
2149 ;
2150 }
2151
2152 DEVACPI_UNLOCK(pThis);
2153 return VINF_SUCCESS;
2154}
2155
2156/**
2157 * @callback_method_impl{FNIOMIOPORTIN, SMBus}
2158 */
2159PDMBOTHCBDECL(int) acpiR3SMBusRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb)
2160{
2161 RT_NOREF1(pDevIns);
2162 ACPIState *pThis = (ACPIState *)pvUser;
2163 DEVACPI_LOCK_R3(pThis);
2164
2165 int rc = VINF_SUCCESS;
2166 LogFunc(("Port=%#x cb=%u\n", Port, cb));
2167 uint8_t off = Port & 0x000f;
2168 if ( (cb != 1 && off <= SMBSHDWCMD_OFF)
2169 || (cb != 2 && (off == SMBSLVEVT_OFF || off == SMBSLVDAT_OFF)))
2170 return VERR_IOM_IOPORT_UNUSED;
2171
2172 switch (off)
2173 {
2174 case SMBHSTSTS_OFF:
2175 *pu32 = pThis->u8SMBusHstSts;
2176 break;
2177 case SMBSLVSTS_OFF:
2178 *pu32 = pThis->u8SMBusSlvSts;
2179 break;
2180 case SMBHSTCNT_OFF:
2181 pThis->u8SMBusBlkIdx = 0;
2182 *pu32 = pThis->u8SMBusHstCnt;
2183 break;
2184 case SMBHSTCMD_OFF:
2185 *pu32 = pThis->u8SMBusHstCmd;
2186 break;
2187 case SMBHSTADD_OFF:
2188 *pu32 = pThis->u8SMBusHstAdd;
2189 break;
2190 case SMBHSTDAT0_OFF:
2191 *pu32 = pThis->u8SMBusHstDat0;
2192 break;
2193 case SMBHSTDAT1_OFF:
2194 *pu32 = pThis->u8SMBusHstDat1;
2195 break;
2196 case SMBBLKDAT_OFF:
2197 *pu32 = pThis->au8SMBusBlkDat[pThis->u8SMBusBlkIdx];
2198 pThis->u8SMBusBlkIdx++;
2199 pThis->u8SMBusBlkIdx &= sizeof(pThis->au8SMBusBlkDat) - 1;
2200 break;
2201 case SMBSLVCNT_OFF:
2202 *pu32 = pThis->u8SMBusSlvCnt;
2203 break;
2204 case SMBSHDWCMD_OFF:
2205 *pu32 = pThis->u8SMBusShdwCmd;
2206 break;
2207 case SMBSLVEVT_OFF:
2208 *pu32 = pThis->u16SMBusSlvEvt;
2209 break;
2210 case SMBSLVDAT_OFF:
2211 *pu32 = pThis->u16SMBusSlvDat;
2212 break;
2213 default:
2214 /* caught by the sanity check above */
2215 rc = VERR_IOM_IOPORT_UNUSED;
2216 }
2217
2218 DEVACPI_UNLOCK(pThis);
2219 LogFunc(("Port=%#x u32=%#x cb=%u rc=%Rrc\n", Port, *pu32, cb, rc));
2220 return rc;
2221}
2222
2223/**
2224 * Called by acpiR3Reset and acpiR3Construct to set up the SMBus PCI config space.
2225 *
2226 * @param pThis The ACPI instance.
2227 */
2228static void acpiR3SMBusPCIBIOSFake(ACPIState *pThis)
2229{
2230 pThis->dev.abConfig[SMBBA ] = pThis->uSMBusIoPortBase | 1; /* SMBBA, SMBus base address, bit 0 marks it as IO range */
2231 pThis->dev.abConfig[SMBBA+1] = pThis->uSMBusIoPortBase >> 8;
2232 pThis->dev.abConfig[SMBBA+2] = 0x00;
2233 pThis->dev.abConfig[SMBBA+3] = 0x00;
2234 pThis->dev.abConfig[SMBHSTCFG] = SMBHSTCFG_INTRSEL_IRQ9 << SMBHSTCFG_INTRSEL_SHIFT | SMBHSTCFG_SMB_HST_EN; /* SMBHSTCFG */
2235 pThis->dev.abConfig[SMBSLVC] = 0x00; /* SMBSLVC */
2236 pThis->dev.abConfig[SMBSHDW1] = 0x00; /* SMBSHDW1 */
2237 pThis->dev.abConfig[SMBSHDW2] = 0x00; /* SMBSHDW2 */
2238 pThis->dev.abConfig[SMBREV] = 0x00; /* SMBREV */
2239}
2240
2241/**
2242 * Called by acpiR3LoadState, acpiR3Reset and acpiR3Construct to reset the SMBus device register state.
2243 *
2244 * @param pThis The ACPI instance.
2245 */
2246static void acpiR3SMBusResetDevice(ACPIState *pThis)
2247{
2248 pThis->u8SMBusHstSts = 0x00;
2249 pThis->u8SMBusSlvSts = 0x00;
2250 pThis->u8SMBusHstCnt = 0x00;
2251 pThis->u8SMBusHstCmd = 0x00;
2252 pThis->u8SMBusHstAdd = 0x00;
2253 pThis->u8SMBusHstDat0 = 0x00;
2254 pThis->u8SMBusHstDat1 = 0x00;
2255 pThis->u8SMBusSlvCnt = 0x00;
2256 pThis->u8SMBusShdwCmd = 0x00;
2257 pThis->u16SMBusSlvEvt = 0x0000;
2258 pThis->u16SMBusSlvDat = 0x0000;
2259 memset(pThis->au8SMBusBlkDat, 0x00, sizeof(pThis->au8SMBusBlkDat));
2260 pThis->u8SMBusBlkIdx = 0;
2261}
2262
2263/**
2264 * Called by acpiR3LoadState and acpiR3UpdateSMBusHandlers to register the SMBus ports.
2265 *
2266 * @returns VBox status code.
2267 * @param pThis The ACPI instance.
2268 */
2269static int acpiR3RegisterSMBusHandlers(ACPIState *pThis)
2270{
2271 int rc = VINF_SUCCESS;
2272
2273 if (pThis->uSMBusIoPortBase == 0)
2274 return VINF_SUCCESS;
2275
2276 rc = PDMDevHlpIOPortRegister(pThis->pDevInsR3, pThis->uSMBusIoPortBase, 16, pThis, acpiR3SMBusWrite, acpiR3SMBusRead, NULL, NULL, "SMBus");
2277 if (RT_FAILURE(rc))
2278 return rc;
2279
2280 return VINF_SUCCESS;
2281}
2282
2283/**
2284 * Called by acpiR3LoadState and acpiR3UpdateSMBusHandlers to unregister the SMBus ports.
2285 *
2286 * @returns VBox status code.
2287 * @param pThis The ACPI instance.
2288 */
2289static int acpiR3UnregisterSMBusHandlers(ACPIState *pThis)
2290{
2291 if (pThis->uSMBusIoPortBase == 0)
2292 return VINF_SUCCESS;
2293
2294 int rc = PDMDevHlpIOPortDeregister(pThis->pDevInsR3, pThis->uSMBusIoPortBase, 16);
2295 AssertRCReturn(rc, rc);
2296
2297 return VINF_SUCCESS;
2298}
2299
2300/**
2301 * Called by acpiR3PciConfigWrite and acpiReset to change the location of the
2302 * SMBus ports.
2303 *
2304 * @returns VBox status code.
2305 *
2306 * @param pThis The ACPI instance.
2307 * @param NewIoPortBase The new base address of the I/O ports.
2308 */
2309static int acpiR3UpdateSMBusHandlers(ACPIState *pThis, RTIOPORT NewIoPortBase)
2310{
2311 Log(("acpi: rebasing SMBus 0x%x -> 0x%x\n", pThis->uSMBusIoPortBase, NewIoPortBase));
2312 if (NewIoPortBase != pThis->uSMBusIoPortBase)
2313 {
2314 int rc = acpiR3UnregisterSMBusHandlers(pThis);
2315 if (RT_FAILURE(rc))
2316 return rc;
2317
2318 pThis->uSMBusIoPortBase = NewIoPortBase;
2319
2320 rc = acpiR3RegisterSMBusHandlers(pThis);
2321 if (RT_FAILURE(rc))
2322 return rc;
2323
2324#if 0 /* is there an FADT table entry for the SMBus base? */
2325 /* We have to update FADT table acccording to the new base */
2326 rc = acpiR3PlantTables(pThis);
2327 AssertRC(rc);
2328 if (RT_FAILURE(rc))
2329 return rc;
2330#endif
2331 }
2332
2333 return VINF_SUCCESS;
2334}
2335
2336
2337/**
2338 * Saved state structure description, version 4.
2339 */
2340static const SSMFIELD g_AcpiSavedStateFields4[] =
2341{
2342 SSMFIELD_ENTRY(ACPIState, pm1a_en),
2343 SSMFIELD_ENTRY(ACPIState, pm1a_sts),
2344 SSMFIELD_ENTRY(ACPIState, pm1a_ctl),
2345 SSMFIELD_ENTRY(ACPIState, u64PmTimerInitial),
2346 SSMFIELD_ENTRY(ACPIState, gpe0_en),
2347 SSMFIELD_ENTRY(ACPIState, gpe0_sts),
2348 SSMFIELD_ENTRY(ACPIState, uBatteryIndex),
2349 SSMFIELD_ENTRY(ACPIState, uSystemInfoIndex),
2350 SSMFIELD_ENTRY(ACPIState, u64RamSize),
2351 SSMFIELD_ENTRY(ACPIState, u8IndexShift),
2352 SSMFIELD_ENTRY(ACPIState, u8UseIOApic),
2353 SSMFIELD_ENTRY(ACPIState, uSleepState),
2354 SSMFIELD_ENTRY_TERM()
2355};
2356
2357/**
2358 * Saved state structure description, version 5.
2359 */
2360static const SSMFIELD g_AcpiSavedStateFields5[] =
2361{
2362 SSMFIELD_ENTRY(ACPIState, pm1a_en),
2363 SSMFIELD_ENTRY(ACPIState, pm1a_sts),
2364 SSMFIELD_ENTRY(ACPIState, pm1a_ctl),
2365 SSMFIELD_ENTRY(ACPIState, u64PmTimerInitial),
2366 SSMFIELD_ENTRY(ACPIState, gpe0_en),
2367 SSMFIELD_ENTRY(ACPIState, gpe0_sts),
2368 SSMFIELD_ENTRY(ACPIState, uBatteryIndex),
2369 SSMFIELD_ENTRY(ACPIState, uSystemInfoIndex),
2370 SSMFIELD_ENTRY(ACPIState, uSleepState),
2371 SSMFIELD_ENTRY(ACPIState, u8IndexShift),
2372 SSMFIELD_ENTRY(ACPIState, uPmIoPortBase),
2373 SSMFIELD_ENTRY_TERM()
2374};
2375
2376/**
2377 * Saved state structure description, version 6.
2378 */
2379static const SSMFIELD g_AcpiSavedStateFields6[] =
2380{
2381 SSMFIELD_ENTRY(ACPIState, pm1a_en),
2382 SSMFIELD_ENTRY(ACPIState, pm1a_sts),
2383 SSMFIELD_ENTRY(ACPIState, pm1a_ctl),
2384 SSMFIELD_ENTRY(ACPIState, u64PmTimerInitial),
2385 SSMFIELD_ENTRY(ACPIState, gpe0_en),
2386 SSMFIELD_ENTRY(ACPIState, gpe0_sts),
2387 SSMFIELD_ENTRY(ACPIState, uBatteryIndex),
2388 SSMFIELD_ENTRY(ACPIState, uSystemInfoIndex),
2389 SSMFIELD_ENTRY(ACPIState, uSleepState),
2390 SSMFIELD_ENTRY(ACPIState, u8IndexShift),
2391 SSMFIELD_ENTRY(ACPIState, uPmIoPortBase),
2392 SSMFIELD_ENTRY(ACPIState, fSuspendToSavedState),
2393 SSMFIELD_ENTRY_TERM()
2394};
2395
2396/**
2397 * Saved state structure description, version 7.
2398 */
2399static const SSMFIELD g_AcpiSavedStateFields7[] =
2400{
2401 SSMFIELD_ENTRY(ACPIState, pm1a_en),
2402 SSMFIELD_ENTRY(ACPIState, pm1a_sts),
2403 SSMFIELD_ENTRY(ACPIState, pm1a_ctl),
2404 SSMFIELD_ENTRY(ACPIState, u64PmTimerInitial),
2405 SSMFIELD_ENTRY(ACPIState, uPmTimerVal),
2406 SSMFIELD_ENTRY(ACPIState, gpe0_en),
2407 SSMFIELD_ENTRY(ACPIState, gpe0_sts),
2408 SSMFIELD_ENTRY(ACPIState, uBatteryIndex),
2409 SSMFIELD_ENTRY(ACPIState, uSystemInfoIndex),
2410 SSMFIELD_ENTRY(ACPIState, uSleepState),
2411 SSMFIELD_ENTRY(ACPIState, u8IndexShift),
2412 SSMFIELD_ENTRY(ACPIState, uPmIoPortBase),
2413 SSMFIELD_ENTRY(ACPIState, fSuspendToSavedState),
2414 SSMFIELD_ENTRY_TERM()
2415};
2416
2417/**
2418 * Saved state structure description, version 8.
2419 */
2420static const SSMFIELD g_AcpiSavedStateFields8[] =
2421{
2422 SSMFIELD_ENTRY(ACPIState, pm1a_en),
2423 SSMFIELD_ENTRY(ACPIState, pm1a_sts),
2424 SSMFIELD_ENTRY(ACPIState, pm1a_ctl),
2425 SSMFIELD_ENTRY(ACPIState, u64PmTimerInitial),
2426 SSMFIELD_ENTRY(ACPIState, uPmTimerVal),
2427 SSMFIELD_ENTRY(ACPIState, gpe0_en),
2428 SSMFIELD_ENTRY(ACPIState, gpe0_sts),
2429 SSMFIELD_ENTRY(ACPIState, uBatteryIndex),
2430 SSMFIELD_ENTRY(ACPIState, uSystemInfoIndex),
2431 SSMFIELD_ENTRY(ACPIState, uSleepState),
2432 SSMFIELD_ENTRY(ACPIState, u8IndexShift),
2433 SSMFIELD_ENTRY(ACPIState, uPmIoPortBase),
2434 SSMFIELD_ENTRY(ACPIState, fSuspendToSavedState),
2435 SSMFIELD_ENTRY(ACPIState, uSMBusIoPortBase),
2436 SSMFIELD_ENTRY(ACPIState, u8SMBusHstSts),
2437 SSMFIELD_ENTRY(ACPIState, u8SMBusSlvSts),
2438 SSMFIELD_ENTRY(ACPIState, u8SMBusHstCnt),
2439 SSMFIELD_ENTRY(ACPIState, u8SMBusHstCmd),
2440 SSMFIELD_ENTRY(ACPIState, u8SMBusHstAdd),
2441 SSMFIELD_ENTRY(ACPIState, u8SMBusHstDat0),
2442 SSMFIELD_ENTRY(ACPIState, u8SMBusHstDat1),
2443 SSMFIELD_ENTRY(ACPIState, u8SMBusSlvCnt),
2444 SSMFIELD_ENTRY(ACPIState, u8SMBusShdwCmd),
2445 SSMFIELD_ENTRY(ACPIState, u16SMBusSlvEvt),
2446 SSMFIELD_ENTRY(ACPIState, u16SMBusSlvDat),
2447 SSMFIELD_ENTRY(ACPIState, au8SMBusBlkDat),
2448 SSMFIELD_ENTRY(ACPIState, u8SMBusBlkIdx),
2449 SSMFIELD_ENTRY_TERM()
2450};
2451
2452/**
2453 * @callback_method_impl{FNSSMDEVSAVEEXEC}
2454 */
2455static DECLCALLBACK(int) acpiR3SaveState(PPDMDEVINS pDevIns, PSSMHANDLE pSSM)
2456{
2457 ACPIState *pThis = PDMINS_2_DATA(pDevIns, ACPIState *);
2458 return SSMR3PutStruct(pSSM, pThis, &g_AcpiSavedStateFields8[0]);
2459}
2460
2461/**
2462 * @callback_method_impl{FNSSMDEVLOADEXEC}
2463 */
2464static DECLCALLBACK(int) acpiR3LoadState(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass)
2465{
2466 ACPIState *pThis = PDMINS_2_DATA(pDevIns, ACPIState *);
2467 Assert(uPass == SSM_PASS_FINAL); NOREF(uPass);
2468
2469 /*
2470 * Unregister PM handlers, will register with actual base after state
2471 * successfully loaded.
2472 */
2473 int rc = acpiR3UnregisterPmHandlers(pThis);
2474 if (RT_FAILURE(rc))
2475 return rc;
2476
2477 /*
2478 * Unregister SMBus handlers, will register with actual base after state
2479 * successfully loaded.
2480 */
2481 rc = acpiR3UnregisterSMBusHandlers(pThis);
2482 if (RT_FAILURE(rc))
2483 return rc;
2484 acpiR3SMBusResetDevice(pThis);
2485
2486 switch (uVersion)
2487 {
2488 case 4:
2489 rc = SSMR3GetStruct(pSSM, pThis, &g_AcpiSavedStateFields4[0]);
2490 break;
2491 case 5:
2492 rc = SSMR3GetStruct(pSSM, pThis, &g_AcpiSavedStateFields5[0]);
2493 break;
2494 case 6:
2495 rc = SSMR3GetStruct(pSSM, pThis, &g_AcpiSavedStateFields6[0]);
2496 break;
2497 case 7:
2498 rc = SSMR3GetStruct(pSSM, pThis, &g_AcpiSavedStateFields7[0]);
2499 break;
2500 case 8:
2501 rc = SSMR3GetStruct(pSSM, pThis, &g_AcpiSavedStateFields8[0]);
2502 break;
2503 default:
2504 rc = VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION;
2505 break;
2506 }
2507 if (RT_SUCCESS(rc))
2508 {
2509 rc = acpiR3RegisterPmHandlers(pThis);
2510 if (RT_FAILURE(rc))
2511 return rc;
2512 rc = acpiR3RegisterSMBusHandlers(pThis);
2513 if (RT_FAILURE(rc))
2514 return rc;
2515 rc = acpiR3FetchBatteryStatus(pThis);
2516 if (RT_FAILURE(rc))
2517 return rc;
2518 rc = acpiR3FetchBatteryInfo(pThis);
2519 if (RT_FAILURE(rc))
2520 return rc;
2521 TMTimerLock(pThis->pPmTimerR3, VERR_IGNORED);
2522 DEVACPI_LOCK_R3(pThis);
2523 uint64_t u64Now = TMTimerGet(pThis->pPmTimerR3);
2524 /* The interrupt may be incorrectly re-generated
2525 * if the state is restored from versions < 7
2526 */
2527 acpiPmTimerUpdate(pThis, u64Now);
2528 acpiR3PmTimerReset(pThis, u64Now);
2529 DEVACPI_UNLOCK(pThis);
2530 TMTimerUnlock(pThis->pPmTimerR3);
2531 }
2532 return rc;
2533}
2534
2535/**
2536 * @interface_method_impl{PDMIBASE,pfnQueryInterface}
2537 */
2538static DECLCALLBACK(void *) acpiR3QueryInterface(PPDMIBASE pInterface, const char *pszIID)
2539{
2540 ACPIState *pThis = RT_FROM_MEMBER(pInterface, ACPIState, IBase);
2541 PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThis->IBase);
2542 PDMIBASE_RETURN_INTERFACE(pszIID, PDMIACPIPORT, &pThis->IACPIPort);
2543 return NULL;
2544}
2545
2546/**
2547 * Calculate the check sum for some ACPI data before planting it.
2548 *
2549 * All the bytes must add up to 0.
2550 *
2551 * @returns check sum.
2552 * @param pvSrc What to check sum.
2553 * @param cbData The amount of data to checksum.
2554 */
2555static uint8_t acpiR3Checksum(const void * const pvSrc, size_t cbData)
2556{
2557 uint8_t const *pbSrc = (uint8_t const *)pvSrc;
2558 uint8_t uSum = 0;
2559 for (size_t i = 0; i < cbData; ++i)
2560 uSum += pbSrc[i];
2561 return -uSum;
2562}
2563
2564/**
2565 * Prepare a ACPI table header.
2566 */
2567static void acpiR3PrepareHeader(ACPIState *pThis, ACPITBLHEADER *header,
2568 const char au8Signature[4],
2569 uint32_t u32Length, uint8_t u8Revision)
2570{
2571 memcpy(header->au8Signature, au8Signature, 4);
2572 header->u32Length = RT_H2LE_U32(u32Length);
2573 header->u8Revision = u8Revision;
2574 memcpy(header->au8OemId, pThis->au8OemId, 6);
2575 memcpy(header->au8OemTabId, "VBOX", 4);
2576 memcpy(header->au8OemTabId+4, au8Signature, 4);
2577 header->u32OemRevision = RT_H2LE_U32(1);
2578 memcpy(header->au8CreatorId, pThis->au8CreatorId, 4);
2579 header->u32CreatorRev = pThis->u32CreatorRev;
2580}
2581
2582/**
2583 * Initialize a generic address structure (ACPIGENADDR).
2584 */
2585static void acpiR3WriteGenericAddr(ACPIGENADDR *g, uint8_t u8AddressSpaceId,
2586 uint8_t u8RegisterBitWidth, uint8_t u8RegisterBitOffset,
2587 uint8_t u8AccessSize, uint64_t u64Address)
2588{
2589 g->u8AddressSpaceId = u8AddressSpaceId;
2590 g->u8RegisterBitWidth = u8RegisterBitWidth;
2591 g->u8RegisterBitOffset = u8RegisterBitOffset;
2592 g->u8AccessSize = u8AccessSize;
2593 g->u64Address = RT_H2LE_U64(u64Address);
2594}
2595
2596/**
2597 * Wrapper around PDMDevHlpPhysWrite used when planting ACPI tables.
2598 */
2599DECLINLINE(void) acpiR3PhysCopy(ACPIState *pThis, RTGCPHYS32 GCPhys32Dst, const void *pvSrc, size_t cbToCopy)
2600{
2601 PDMDevHlpPhysWrite(pThis->pDevInsR3, GCPhys32Dst, pvSrc, cbToCopy);
2602}
2603
2604/**
2605 * Plant the Differentiated System Description Table (DSDT).
2606 */
2607static void acpiR3SetupDsdt(ACPIState *pThis, RTGCPHYS32 GCPhys32, void *pvPtr, size_t cbDsdt)
2608{
2609 acpiR3PhysCopy(pThis, GCPhys32, pvPtr, cbDsdt);
2610}
2611
2612/**
2613 * Plan the Secondary System Description Table (SSDT).
2614 */
2615static void acpiR3SetupSsdt(ACPIState *pThis, RTGCPHYS32 addr,
2616 void* pPtr, size_t uSsdtLen)
2617{
2618 acpiR3PhysCopy(pThis, addr, pPtr, uSsdtLen);
2619}
2620
2621/**
2622 * Plant the Firmware ACPI Control Structure (FACS).
2623 */
2624static void acpiR3SetupFacs(ACPIState *pThis, RTGCPHYS32 addr)
2625{
2626 ACPITBLFACS facs;
2627
2628 memset(&facs, 0, sizeof(facs));
2629 memcpy(facs.au8Signature, "FACS", 4);
2630 facs.u32Length = RT_H2LE_U32(sizeof(ACPITBLFACS));
2631 facs.u32HWSignature = RT_H2LE_U32(0);
2632 facs.u32FWVector = RT_H2LE_U32(0);
2633 facs.u32GlobalLock = RT_H2LE_U32(0);
2634 facs.u32Flags = RT_H2LE_U32(0);
2635 facs.u64X_FWVector = RT_H2LE_U64(0);
2636 facs.u8Version = 1;
2637
2638 acpiR3PhysCopy(pThis, addr, (const uint8_t *)&facs, sizeof(facs));
2639}
2640
2641/**
2642 * Plant the Fixed ACPI Description Table (FADT aka FACP).
2643 */
2644static void acpiR3SetupFadt(ACPIState *pThis, RTGCPHYS32 GCPhysAcpi1, RTGCPHYS32 GCPhysAcpi2,
2645 RTGCPHYS32 GCPhysFacs, RTGCPHYS GCPhysDsdt)
2646{
2647 ACPITBLFADT fadt;
2648
2649 /* First the ACPI version 2+ version of the structure. */
2650 memset(&fadt, 0, sizeof(fadt));
2651 acpiR3PrepareHeader(pThis, &fadt.header, "FACP", sizeof(fadt), 4);
2652 fadt.u32FACS = RT_H2LE_U32(GCPhysFacs);
2653 fadt.u32DSDT = RT_H2LE_U32(GCPhysDsdt);
2654 fadt.u8IntModel = 0; /* dropped from the ACPI 2.0 spec. */
2655 fadt.u8PreferredPMProfile = 0; /* unspecified */
2656 fadt.u16SCIInt = RT_H2LE_U16(SCI_INT);
2657 fadt.u32SMICmd = RT_H2LE_U32(SMI_CMD);
2658 fadt.u8AcpiEnable = ACPI_ENABLE;
2659 fadt.u8AcpiDisable = ACPI_DISABLE;
2660 fadt.u8S4BIOSReq = 0;
2661 fadt.u8PStateCnt = 0;
2662 fadt.u32PM1aEVTBLK = RT_H2LE_U32(acpiR3CalcPmPort(pThis, PM1a_EVT_OFFSET));
2663 fadt.u32PM1bEVTBLK = RT_H2LE_U32(acpiR3CalcPmPort(pThis, PM1b_EVT_OFFSET));
2664 fadt.u32PM1aCTLBLK = RT_H2LE_U32(acpiR3CalcPmPort(pThis, PM1a_CTL_OFFSET));
2665 fadt.u32PM1bCTLBLK = RT_H2LE_U32(acpiR3CalcPmPort(pThis, PM1b_CTL_OFFSET));
2666 fadt.u32PM2CTLBLK = RT_H2LE_U32(acpiR3CalcPmPort(pThis, PM2_CTL_OFFSET));
2667 fadt.u32PMTMRBLK = RT_H2LE_U32(acpiR3CalcPmPort(pThis, PM_TMR_OFFSET));
2668 fadt.u32GPE0BLK = RT_H2LE_U32(acpiR3CalcPmPort(pThis, GPE0_OFFSET));
2669 fadt.u32GPE1BLK = RT_H2LE_U32(acpiR3CalcPmPort(pThis, GPE1_OFFSET));
2670 fadt.u8PM1EVTLEN = 4;
2671 fadt.u8PM1CTLLEN = 2;
2672 fadt.u8PM2CTLLEN = 0;
2673 fadt.u8PMTMLEN = 4;
2674 fadt.u8GPE0BLKLEN = GPE0_BLK_LEN;
2675 fadt.u8GPE1BLKLEN = GPE1_BLK_LEN;
2676 fadt.u8GPE1BASE = GPE1_BASE;
2677 fadt.u8CSTCNT = 0;
2678 fadt.u16PLVL2LAT = RT_H2LE_U16(P_LVL2_LAT);
2679 fadt.u16PLVL3LAT = RT_H2LE_U16(P_LVL3_LAT);
2680 fadt.u16FlushSize = RT_H2LE_U16(FLUSH_SIZE);
2681 fadt.u16FlushStride = RT_H2LE_U16(FLUSH_STRIDE);
2682 fadt.u8DutyOffset = 0;
2683 fadt.u8DutyWidth = 0;
2684 fadt.u8DayAlarm = 0;
2685 fadt.u8MonAlarm = 0;
2686 fadt.u8Century = 0;
2687 fadt.u16IAPCBOOTARCH = RT_H2LE_U16(IAPC_BOOT_ARCH_LEGACY_DEV | IAPC_BOOT_ARCH_8042);
2688 /** @note WBINVD is required for ACPI versions newer than 1.0 */
2689 fadt.u32Flags = RT_H2LE_U32( FADT_FL_WBINVD
2690 | FADT_FL_FIX_RTC
2691 | FADT_FL_TMR_VAL_EXT
2692 | FADT_FL_RESET_REG_SUP);
2693
2694 /* We have to force physical APIC mode or Linux can't use more than 8 CPUs */
2695 if (pThis->fCpuHotPlug)
2696 fadt.u32Flags |= RT_H2LE_U32(FADT_FL_FORCE_APIC_PHYS_DEST_MODE);
2697
2698 acpiR3WriteGenericAddr(&fadt.ResetReg, 1, 8, 0, 1, ACPI_RESET_BLK);
2699 fadt.u8ResetVal = ACPI_RESET_REG_VAL;
2700 fadt.u64XFACS = RT_H2LE_U64((uint64_t)GCPhysFacs);
2701 fadt.u64XDSDT = RT_H2LE_U64((uint64_t)GCPhysDsdt);
2702 acpiR3WriteGenericAddr(&fadt.X_PM1aEVTBLK, 1, 32, 0, 2, acpiR3CalcPmPort(pThis, PM1a_EVT_OFFSET));
2703 acpiR3WriteGenericAddr(&fadt.X_PM1bEVTBLK, 0, 0, 0, 0, acpiR3CalcPmPort(pThis, PM1b_EVT_OFFSET));
2704 acpiR3WriteGenericAddr(&fadt.X_PM1aCTLBLK, 1, 16, 0, 2, acpiR3CalcPmPort(pThis, PM1a_CTL_OFFSET));
2705 acpiR3WriteGenericAddr(&fadt.X_PM1bCTLBLK, 0, 0, 0, 0, acpiR3CalcPmPort(pThis, PM1b_CTL_OFFSET));
2706 acpiR3WriteGenericAddr(&fadt.X_PM2CTLBLK, 0, 0, 0, 0, acpiR3CalcPmPort(pThis, PM2_CTL_OFFSET));
2707 acpiR3WriteGenericAddr(&fadt.X_PMTMRBLK, 1, 32, 0, 3, acpiR3CalcPmPort(pThis, PM_TMR_OFFSET));
2708 acpiR3WriteGenericAddr(&fadt.X_GPE0BLK, 1, 16, 0, 1, acpiR3CalcPmPort(pThis, GPE0_OFFSET));
2709 acpiR3WriteGenericAddr(&fadt.X_GPE1BLK, 0, 0, 0, 0, acpiR3CalcPmPort(pThis, GPE1_OFFSET));
2710 fadt.header.u8Checksum = acpiR3Checksum(&fadt, sizeof(fadt));
2711 acpiR3PhysCopy(pThis, GCPhysAcpi2, &fadt, sizeof(fadt));
2712
2713 /* Now the ACPI 1.0 version. */
2714 fadt.header.u32Length = ACPITBLFADT_VERSION1_SIZE;
2715 fadt.u8IntModel = INT_MODEL_DUAL_PIC;
2716 fadt.header.u8Checksum = 0; /* Must be zeroed before recalculating checksum! */
2717 fadt.header.u8Checksum = acpiR3Checksum(&fadt, ACPITBLFADT_VERSION1_SIZE);
2718 acpiR3PhysCopy(pThis, GCPhysAcpi1, &fadt, ACPITBLFADT_VERSION1_SIZE);
2719}
2720
2721/**
2722 * Plant the root System Description Table.
2723 *
2724 * The RSDT and XSDT tables are basically identical. The only difference is 32
2725 * vs 64 bits addresses for description headers. RSDT is for ACPI 1.0. XSDT for
2726 * ACPI 2.0 and up.
2727 */
2728static int acpiR3SetupRsdt(ACPIState *pThis, RTGCPHYS32 addr, unsigned int nb_entries, uint32_t *addrs)
2729{
2730 ACPITBLRSDT *rsdt;
2731 const size_t size = sizeof(ACPITBLHEADER) + nb_entries * sizeof(rsdt->u32Entry[0]);
2732
2733 rsdt = (ACPITBLRSDT*)RTMemAllocZ(size);
2734 if (!rsdt)
2735 return PDMDEV_SET_ERROR(pThis->pDevInsR3, VERR_NO_TMP_MEMORY, N_("Cannot allocate RSDT"));
2736
2737 acpiR3PrepareHeader(pThis, &rsdt->header, "RSDT", (uint32_t)size, 1);
2738 for (unsigned int i = 0; i < nb_entries; ++i)
2739 {
2740 rsdt->u32Entry[i] = RT_H2LE_U32(addrs[i]);
2741 Log(("Setup RSDT: [%d] = %x\n", i, rsdt->u32Entry[i]));
2742 }
2743 rsdt->header.u8Checksum = acpiR3Checksum(rsdt, size);
2744 acpiR3PhysCopy(pThis, addr, rsdt, size);
2745 RTMemFree(rsdt);
2746 return VINF_SUCCESS;
2747}
2748
2749/**
2750 * Plant the Extended System Description Table.
2751 */
2752static int acpiR3SetupXsdt(ACPIState *pThis, RTGCPHYS32 addr, unsigned int nb_entries, uint32_t *addrs)
2753{
2754 ACPITBLXSDT *xsdt;
2755 const size_t size = sizeof(ACPITBLHEADER) + nb_entries * sizeof(xsdt->u64Entry[0]);
2756
2757 xsdt = (ACPITBLXSDT*)RTMemAllocZ(size);
2758 if (!xsdt)
2759 return VERR_NO_TMP_MEMORY;
2760
2761 acpiR3PrepareHeader(pThis, &xsdt->header, "XSDT", (uint32_t)size, 1 /* according to ACPI 3.0 specs */);
2762
2763 if (pThis->fUseCust)
2764 memcpy(xsdt->header.au8OemTabId, pThis->au8OemTabId, 8);
2765
2766 for (unsigned int i = 0; i < nb_entries; ++i)
2767 {
2768 xsdt->u64Entry[i] = RT_H2LE_U64((uint64_t)addrs[i]);
2769 Log(("Setup XSDT: [%d] = %RX64\n", i, xsdt->u64Entry[i]));
2770 }
2771 xsdt->header.u8Checksum = acpiR3Checksum(xsdt, size);
2772 acpiR3PhysCopy(pThis, addr, xsdt, size);
2773 RTMemFree(xsdt);
2774 return VINF_SUCCESS;
2775}
2776
2777/**
2778 * Plant the Root System Description Pointer (RSDP).
2779 */
2780static void acpiR3SetupRsdp(ACPIState *pThis, ACPITBLRSDP *rsdp, RTGCPHYS32 GCPhysRsdt, RTGCPHYS GCPhysXsdt)
2781{
2782 memset(rsdp, 0, sizeof(*rsdp));
2783
2784 /* ACPI 1.0 part (RSDT) */
2785 memcpy(rsdp->au8Signature, "RSD PTR ", 8);
2786 memcpy(rsdp->au8OemId, pThis->au8OemId, 6);
2787 rsdp->u8Revision = ACPI_REVISION;
2788 rsdp->u32RSDT = RT_H2LE_U32(GCPhysRsdt);
2789 rsdp->u8Checksum = acpiR3Checksum(rsdp, RT_OFFSETOF(ACPITBLRSDP, u32Length));
2790
2791 /* ACPI 2.0 part (XSDT) */
2792 rsdp->u32Length = RT_H2LE_U32(sizeof(ACPITBLRSDP));
2793 rsdp->u64XSDT = RT_H2LE_U64(GCPhysXsdt);
2794 rsdp->u8ExtChecksum = acpiR3Checksum(rsdp, sizeof(ACPITBLRSDP));
2795}
2796
2797/**
2798 * Multiple APIC Description Table.
2799 *
2800 * This structure looks somewhat convoluted due layout of MADT table in MP case.
2801 * There extpected to be multiple LAPIC records for each CPU, thus we cannot
2802 * use regular C structure and proxy to raw memory instead.
2803 */
2804class AcpiTableMadt
2805{
2806 /**
2807 * All actual data stored in dynamically allocated memory pointed by this field.
2808 */
2809 uint8_t *m_pbData;
2810 /**
2811 * Number of CPU entries in this MADT.
2812 */
2813 uint32_t m_cCpus;
2814
2815 /**
2816 * Number of interrupt overrides.
2817 */
2818 uint32_t m_cIsos;
2819
2820public:
2821 /**
2822 * Address of ACPI header
2823 */
2824 inline ACPITBLHEADER *header_addr(void) const
2825 {
2826 return (ACPITBLHEADER *)m_pbData;
2827 }
2828
2829 /**
2830 * Address of local APIC for each CPU. Note that different CPUs address different LAPICs,
2831 * although address is the same for all of them.
2832 */
2833 inline uint32_t *u32LAPIC_addr(void) const
2834 {
2835 return (uint32_t *)(header_addr() + 1);
2836 }
2837
2838 /**
2839 * Address of APIC flags
2840 */
2841 inline uint32_t *u32Flags_addr(void) const
2842 {
2843 return (uint32_t *)(u32LAPIC_addr() + 1);
2844 }
2845
2846 /**
2847 * Address of ISO description
2848 */
2849 inline ACPITBLISO *ISO_addr(void) const
2850 {
2851 return (ACPITBLISO *)(u32Flags_addr() + 1);
2852 }
2853
2854 /**
2855 * Address of per-CPU LAPIC descriptions
2856 */
2857 inline ACPITBLLAPIC *LApics_addr(void) const
2858 {
2859 return (ACPITBLLAPIC *)(ISO_addr() + m_cIsos);
2860 }
2861
2862 /**
2863 * Address of IO APIC description
2864 */
2865 inline ACPITBLIOAPIC *IOApic_addr(void) const
2866 {
2867 return (ACPITBLIOAPIC *)(LApics_addr() + m_cCpus);
2868 }
2869
2870 /**
2871 * Size of MADT.
2872 * Note that this function assumes IOApic to be the last field in structure.
2873 */
2874 inline uint32_t size(void) const
2875 {
2876 return (uint8_t *)(IOApic_addr() + 1) - (uint8_t *)header_addr();
2877 }
2878
2879 /**
2880 * Raw data of MADT.
2881 */
2882 inline const uint8_t *data(void) const
2883 {
2884 return m_pbData;
2885 }
2886
2887 /**
2888 * Size of MADT for given ACPI config, useful to compute layout.
2889 */
2890 static uint32_t sizeFor(ACPIState *pThis, uint32_t cIsos)
2891 {
2892 return AcpiTableMadt(pThis->cCpus, cIsos).size();
2893 }
2894
2895 /*
2896 * Constructor, only works in Ring 3, doesn't look like a big deal.
2897 */
2898 AcpiTableMadt(uint32_t cCpus, uint32_t cIsos)
2899 {
2900 m_cCpus = cCpus;
2901 m_cIsos = cIsos;
2902 m_pbData = NULL; /* size() uses this and gcc will complain if not initialized. */
2903 uint32_t cb = size();
2904 m_pbData = (uint8_t *)RTMemAllocZ(cb);
2905 }
2906
2907 ~AcpiTableMadt()
2908 {
2909 RTMemFree(m_pbData);
2910 }
2911};
2912
2913
2914/**
2915 * Plant the Multiple APIC Description Table (MADT).
2916 *
2917 * @note APIC without IO-APIC hangs Windows Vista therefore we setup both.
2918 *
2919 * @todo All hardcoded, should set this up based on the actual VM config!!!!!
2920 */
2921static void acpiR3SetupMadt(ACPIState *pThis, RTGCPHYS32 addr)
2922{
2923 uint16_t cpus = pThis->cCpus;
2924 AcpiTableMadt madt(cpus, NUMBER_OF_IRQ_SOURCE_OVERRIDES);
2925
2926 acpiR3PrepareHeader(pThis, madt.header_addr(), "APIC", madt.size(), 2);
2927
2928 *madt.u32LAPIC_addr() = RT_H2LE_U32(0xfee00000);
2929 *madt.u32Flags_addr() = RT_H2LE_U32(PCAT_COMPAT);
2930
2931 /* LAPICs records */
2932 ACPITBLLAPIC* lapic = madt.LApics_addr();
2933 for (uint16_t i = 0; i < cpus; i++)
2934 {
2935 lapic->u8Type = 0;
2936 lapic->u8Length = sizeof(ACPITBLLAPIC);
2937 lapic->u8ProcId = i;
2938 /** Must match numbering convention in MPTABLES */
2939 lapic->u8ApicId = i;
2940 lapic->u32Flags = VMCPUSET_IS_PRESENT(&pThis->CpuSetAttached, i) ? RT_H2LE_U32(LAPIC_ENABLED) : 0;
2941 lapic++;
2942 }
2943
2944 /* IO-APIC record */
2945 ACPITBLIOAPIC* ioapic = madt.IOApic_addr();
2946 ioapic->u8Type = 1;
2947 ioapic->u8Length = sizeof(ACPITBLIOAPIC);
2948 /** Must match MP tables ID */
2949 ioapic->u8IOApicId = cpus;
2950 ioapic->u8Reserved = 0;
2951 ioapic->u32Address = RT_H2LE_U32(0xfec00000);
2952 ioapic->u32GSIB = RT_H2LE_U32(0);
2953
2954 /* Interrupt Source Overrides */
2955 /* Flags:
2956 bits[3:2]:
2957 00 conforms to the bus
2958 01 edge-triggered
2959 10 reserved
2960 11 level-triggered
2961 bits[1:0]
2962 00 conforms to the bus
2963 01 active-high
2964 10 reserved
2965 11 active-low */
2966 /* If changing, also update PDMIsaSetIrq() and MPS */
2967 ACPITBLISO* isos = madt.ISO_addr();
2968 /* Timer interrupt rule IRQ0 to GSI2 */
2969 isos[0].u8Type = 2;
2970 isos[0].u8Length = sizeof(ACPITBLISO);
2971 isos[0].u8Bus = 0; /* Must be 0 */
2972 isos[0].u8Source = 0; /* IRQ0 */
2973 isos[0].u32GSI = 2; /* connected to pin 2 */
2974 isos[0].u16Flags = 0; /* conform to the bus */
2975
2976 /* ACPI interrupt rule - IRQ9 to GSI9 */
2977 isos[1].u8Type = 2;
2978 isos[1].u8Length = sizeof(ACPITBLISO);
2979 isos[1].u8Bus = 0; /* Must be 0 */
2980 isos[1].u8Source = 9; /* IRQ9 */
2981 isos[1].u32GSI = 9; /* connected to pin 9 */
2982 isos[1].u16Flags = 0xd; /* active high, level triggered */
2983 Assert(NUMBER_OF_IRQ_SOURCE_OVERRIDES == 2);
2984
2985 madt.header_addr()->u8Checksum = acpiR3Checksum(madt.data(), madt.size());
2986 acpiR3PhysCopy(pThis, addr, madt.data(), madt.size());
2987}
2988
2989/**
2990 * Plant the High Performance Event Timer (HPET) descriptor.
2991 */
2992static void acpiR3SetupHpet(ACPIState *pThis, RTGCPHYS32 addr)
2993{
2994 ACPITBLHPET hpet;
2995
2996 memset(&hpet, 0, sizeof(hpet));
2997
2998 acpiR3PrepareHeader(pThis, &hpet.aHeader, "HPET", sizeof(hpet), 1);
2999 /* Keep base address consistent with appropriate DSDT entry (vbox.dsl) */
3000 acpiR3WriteGenericAddr(&hpet.HpetAddr,
3001 0 /* Memory address space */,
3002 64 /* Register bit width */,
3003 0 /* Bit offset */,
3004 0, /* Register access size, is it correct? */
3005 0xfed00000 /* Address */);
3006
3007 hpet.u32Id = 0x8086a201; /* must match what HPET ID returns, is it correct ? */
3008 hpet.u32Number = 0;
3009 hpet.u32MinTick = 4096;
3010 hpet.u8Attributes = 0;
3011
3012 hpet.aHeader.u8Checksum = acpiR3Checksum(&hpet, sizeof(hpet));
3013
3014 acpiR3PhysCopy(pThis, addr, (const uint8_t *)&hpet, sizeof(hpet));
3015}
3016
3017
3018/** Custom Description Table */
3019static void acpiR3SetupCust(ACPIState *pThis, RTGCPHYS32 addr)
3020{
3021 ACPITBLCUST cust;
3022
3023 /* First the ACPI version 1 version of the structure. */
3024 memset(&cust, 0, sizeof(cust));
3025 acpiR3PrepareHeader(pThis, &cust.header, "CUST", sizeof(cust), 1);
3026
3027 memcpy(cust.header.au8OemTabId, pThis->au8OemTabId, 8);
3028 cust.header.u32OemRevision = RT_H2LE_U32(pThis->u32OemRevision);
3029 cust.header.u8Checksum = acpiR3Checksum((uint8_t *)&cust, sizeof(cust));
3030
3031 acpiR3PhysCopy(pThis, addr, pThis->pu8CustBin, pThis->cbCustBin);
3032}
3033
3034/**
3035 * Used by acpiR3PlantTables to plant a MMCONFIG PCI config space access (MCFG)
3036 * descriptor.
3037 *
3038 * @param pThis The ACPI instance.
3039 * @param GCPhysDst Where to plant it.
3040 */
3041static void acpiR3SetupMcfg(ACPIState *pThis, RTGCPHYS32 GCPhysDst)
3042{
3043 struct
3044 {
3045 ACPITBLMCFG hdr;
3046 ACPITBLMCFGENTRY entry;
3047 } tbl;
3048 uint8_t u8StartBus = 0;
3049 uint8_t u8EndBus = (pThis->u64PciConfigMMioLength >> 20) - 1;
3050
3051 RT_ZERO(tbl);
3052
3053 acpiR3PrepareHeader(pThis, &tbl.hdr.aHeader, "MCFG", sizeof(tbl), 1);
3054 tbl.entry.u64BaseAddress = pThis->u64PciConfigMMioAddress;
3055 tbl.entry.u8StartBus = u8StartBus;
3056 tbl.entry.u8EndBus = u8EndBus;
3057 // u16PciSegmentGroup must match _SEG in ACPI table
3058
3059 tbl.hdr.aHeader.u8Checksum = acpiR3Checksum(&tbl, sizeof(tbl));
3060
3061 acpiR3PhysCopy(pThis, GCPhysDst, (const uint8_t *)&tbl, sizeof(tbl));
3062}
3063
3064/**
3065 * Used by acpiR3PlantTables and acpiConstruct.
3066 *
3067 * @returns Guest memory address.
3068 */
3069static uint32_t apicR3FindRsdpSpace(void)
3070{
3071 return 0xe0000;
3072}
3073
3074/**
3075 * Create the ACPI tables in guest memory.
3076 */
3077static int acpiR3PlantTables(ACPIState *pThis)
3078{
3079 int rc;
3080 RTGCPHYS32 GCPhysCur, GCPhysRsdt, GCPhysXsdt, GCPhysFadtAcpi1, GCPhysFadtAcpi2, GCPhysFacs, GCPhysDsdt;
3081 RTGCPHYS32 GCPhysHpet = 0;
3082 RTGCPHYS32 GCPhysApic = 0;
3083 RTGCPHYS32 GCPhysSsdt = 0;
3084 RTGCPHYS32 GCPhysMcfg = 0;
3085 RTGCPHYS32 GCPhysCust = 0;
3086 uint32_t addend = 0;
3087 RTGCPHYS32 aGCPhysRsdt[8];
3088 RTGCPHYS32 aGCPhysXsdt[8];
3089 uint32_t cAddr;
3090 uint32_t iMadt = 0;
3091 uint32_t iHpet = 0;
3092 uint32_t iSsdt = 0;
3093 uint32_t iMcfg = 0;
3094 uint32_t iCust = 0;
3095 size_t cbRsdt = sizeof(ACPITBLHEADER);
3096 size_t cbXsdt = sizeof(ACPITBLHEADER);
3097
3098 cAddr = 1; /* FADT */
3099 if (pThis->u8UseIOApic)
3100 iMadt = cAddr++; /* MADT */
3101
3102 if (pThis->fUseHpet)
3103 iHpet = cAddr++; /* HPET */
3104
3105 if (pThis->fUseMcfg)
3106 iMcfg = cAddr++; /* MCFG */
3107
3108 if (pThis->fUseCust)
3109 iCust = cAddr++; /* CUST */
3110
3111 iSsdt = cAddr++; /* SSDT */
3112
3113 Assert(cAddr < RT_ELEMENTS(aGCPhysRsdt));
3114 Assert(cAddr < RT_ELEMENTS(aGCPhysXsdt));
3115
3116 cbRsdt += cAddr*sizeof(uint32_t); /* each entry: 32 bits phys. address. */
3117 cbXsdt += cAddr*sizeof(uint64_t); /* each entry: 64 bits phys. address. */
3118
3119 rc = CFGMR3QueryU64(pThis->pDevInsR3->pCfg, "RamSize", &pThis->u64RamSize);
3120 if (RT_FAILURE(rc))
3121 return PDMDEV_SET_ERROR(pThis->pDevInsR3, rc,
3122 N_("Configuration error: Querying \"RamSize\" as integer failed"));
3123
3124 uint32_t cbRamHole;
3125 rc = CFGMR3QueryU32Def(pThis->pDevInsR3->pCfg, "RamHoleSize", &cbRamHole, MM_RAM_HOLE_SIZE_DEFAULT);
3126 if (RT_FAILURE(rc))
3127 return PDMDEV_SET_ERROR(pThis->pDevInsR3, rc,
3128 N_("Configuration error: Querying \"RamHoleSize\" as integer failed"));
3129
3130 /*
3131 * Calculate the sizes for the high and low regions.
3132 */
3133 const uint64_t offRamHole = _4G - cbRamHole;
3134 pThis->cbRamHigh = offRamHole < pThis->u64RamSize ? pThis->u64RamSize - offRamHole : 0;
3135 uint64_t cbRamLow = offRamHole < pThis->u64RamSize ? offRamHole : pThis->u64RamSize;
3136 if (cbRamLow > UINT32_C(0xffe00000)) /* See MEM3. */
3137 {
3138 /* Note: This is also enforced by DevPcBios.cpp. */
3139 LogRel(("ACPI: Clipping cbRamLow=%#RX64 down to 0xffe00000.\n", cbRamLow));
3140 cbRamLow = UINT32_C(0xffe00000);
3141 }
3142 pThis->cbRamLow = (uint32_t)cbRamLow;
3143
3144 GCPhysCur = 0;
3145 GCPhysRsdt = GCPhysCur;
3146
3147 GCPhysCur = RT_ALIGN_32(GCPhysCur + cbRsdt, 16);
3148 GCPhysXsdt = GCPhysCur;
3149
3150 GCPhysCur = RT_ALIGN_32(GCPhysCur + cbXsdt, 16);
3151 GCPhysFadtAcpi1 = GCPhysCur;
3152
3153 GCPhysCur = RT_ALIGN_32(GCPhysCur + ACPITBLFADT_VERSION1_SIZE, 16);
3154 GCPhysFadtAcpi2 = GCPhysCur;
3155
3156 GCPhysCur = RT_ALIGN_32(GCPhysCur + sizeof(ACPITBLFADT), 64);
3157 GCPhysFacs = GCPhysCur;
3158
3159 GCPhysCur = RT_ALIGN_32(GCPhysCur + sizeof(ACPITBLFACS), 16);
3160 if (pThis->u8UseIOApic)
3161 {
3162 GCPhysApic = GCPhysCur;
3163 GCPhysCur = RT_ALIGN_32(GCPhysCur + AcpiTableMadt::sizeFor(pThis, NUMBER_OF_IRQ_SOURCE_OVERRIDES), 16);
3164 }
3165 if (pThis->fUseHpet)
3166 {
3167 GCPhysHpet = GCPhysCur;
3168 GCPhysCur = RT_ALIGN_32(GCPhysCur + sizeof(ACPITBLHPET), 16);
3169 }
3170 if (pThis->fUseMcfg)
3171 {
3172 GCPhysMcfg = GCPhysCur;
3173 /* Assume one entry */
3174 GCPhysCur = RT_ALIGN_32(GCPhysCur + sizeof(ACPITBLMCFG) + sizeof(ACPITBLMCFGENTRY), 16);
3175 }
3176 if (pThis->fUseCust)
3177 {
3178 GCPhysCust = GCPhysCur;
3179 GCPhysCur = RT_ALIGN_32(GCPhysCur + pThis->cbCustBin, 16);
3180 }
3181
3182 void *pvSsdtCode = NULL;
3183 size_t cbSsdt = 0;
3184 rc = acpiPrepareSsdt(pThis->pDevInsR3, &pvSsdtCode, &cbSsdt);
3185 if (RT_FAILURE(rc))
3186 return rc;
3187
3188 GCPhysSsdt = GCPhysCur;
3189 GCPhysCur = RT_ALIGN_32(GCPhysCur + cbSsdt, 16);
3190
3191 GCPhysDsdt = GCPhysCur;
3192
3193 void *pvDsdtCode = NULL;
3194 size_t cbDsdt = 0;
3195 rc = acpiPrepareDsdt(pThis->pDevInsR3, &pvDsdtCode, &cbDsdt);
3196 if (RT_FAILURE(rc))
3197 return rc;
3198
3199 GCPhysCur = RT_ALIGN_32(GCPhysCur + cbDsdt, 16);
3200
3201 if (GCPhysCur > 0x10000)
3202 return PDMDEV_SET_ERROR(pThis->pDevInsR3, VERR_TOO_MUCH_DATA,
3203 N_("Error: ACPI tables bigger than 64KB"));
3204
3205 Log(("RSDP 0x%08X\n", apicR3FindRsdpSpace()));
3206 addend = pThis->cbRamLow - 0x10000;
3207 Log(("RSDT 0x%08X XSDT 0x%08X\n", GCPhysRsdt + addend, GCPhysXsdt + addend));
3208 Log(("FACS 0x%08X FADT (1.0) 0x%08X, FADT (2+) 0x%08X\n", GCPhysFacs + addend, GCPhysFadtAcpi1 + addend, GCPhysFadtAcpi2 + addend));
3209 Log(("DSDT 0x%08X", GCPhysDsdt + addend));
3210 if (pThis->u8UseIOApic)
3211 Log((" MADT 0x%08X", GCPhysApic + addend));
3212 if (pThis->fUseHpet)
3213 Log((" HPET 0x%08X", GCPhysHpet + addend));
3214 if (pThis->fUseMcfg)
3215 Log((" MCFG 0x%08X", GCPhysMcfg + addend));
3216 if (pThis->fUseCust)
3217 Log((" CUST 0x%08X", GCPhysCust + addend));
3218 Log((" SSDT 0x%08X", GCPhysSsdt + addend));
3219 Log(("\n"));
3220
3221 acpiR3SetupRsdp(pThis, (ACPITBLRSDP *)pThis->au8RSDPPage, GCPhysRsdt + addend, GCPhysXsdt + addend);
3222 acpiR3SetupDsdt(pThis, GCPhysDsdt + addend, pvDsdtCode, cbDsdt);
3223 acpiCleanupDsdt(pThis->pDevInsR3, pvDsdtCode);
3224 acpiR3SetupFacs(pThis, GCPhysFacs + addend);
3225 acpiR3SetupFadt(pThis, GCPhysFadtAcpi1 + addend, GCPhysFadtAcpi2 + addend, GCPhysFacs + addend, GCPhysDsdt + addend);
3226
3227 aGCPhysRsdt[0] = GCPhysFadtAcpi1 + addend;
3228 aGCPhysXsdt[0] = GCPhysFadtAcpi2 + addend;
3229 if (pThis->u8UseIOApic)
3230 {
3231 acpiR3SetupMadt(pThis, GCPhysApic + addend);
3232 aGCPhysRsdt[iMadt] = GCPhysApic + addend;
3233 aGCPhysXsdt[iMadt] = GCPhysApic + addend;
3234 }
3235 if (pThis->fUseHpet)
3236 {
3237 acpiR3SetupHpet(pThis, GCPhysHpet + addend);
3238 aGCPhysRsdt[iHpet] = GCPhysHpet + addend;
3239 aGCPhysXsdt[iHpet] = GCPhysHpet + addend;
3240 }
3241 if (pThis->fUseMcfg)
3242 {
3243 acpiR3SetupMcfg(pThis, GCPhysMcfg + addend);
3244 aGCPhysRsdt[iMcfg] = GCPhysMcfg + addend;
3245 aGCPhysXsdt[iMcfg] = GCPhysMcfg + addend;
3246 }
3247 if (pThis->fUseCust)
3248 {
3249 acpiR3SetupCust(pThis, GCPhysCust + addend);
3250 aGCPhysRsdt[iCust] = GCPhysCust + addend;
3251 aGCPhysXsdt[iCust] = GCPhysCust + addend;
3252 }
3253
3254 acpiR3SetupSsdt(pThis, GCPhysSsdt + addend, pvSsdtCode, cbSsdt);
3255 acpiCleanupSsdt(pThis->pDevInsR3, pvSsdtCode);
3256 aGCPhysRsdt[iSsdt] = GCPhysSsdt + addend;
3257 aGCPhysXsdt[iSsdt] = GCPhysSsdt + addend;
3258
3259 rc = acpiR3SetupRsdt(pThis, GCPhysRsdt + addend, cAddr, aGCPhysRsdt);
3260 if (RT_FAILURE(rc))
3261 return rc;
3262 return acpiR3SetupXsdt(pThis, GCPhysXsdt + addend, cAddr, aGCPhysXsdt);
3263}
3264
3265/**
3266 * @callback_method_impl{FNPCICONFIGREAD}
3267 */
3268static DECLCALLBACK(uint32_t) acpiR3PciConfigRead(PPDMDEVINS pDevIns, PPDMPCIDEV pPciDev, uint32_t Address, unsigned cb)
3269{
3270 ACPIState *pThis = PDMINS_2_DATA(pDevIns, ACPIState *);
3271
3272 Log2(("acpi: PCI config read: 0x%x (%d)\n", Address, cb));
3273 return pThis->pfnAcpiPciConfigRead(pDevIns, pPciDev, Address, cb);
3274}
3275
3276/**
3277 * @callback_method_impl{FNPCICONFIGWRITE}
3278 */
3279static DECLCALLBACK(void) acpiR3PciConfigWrite(PPDMDEVINS pDevIns, PPDMPCIDEV pPciDev, uint32_t Address,
3280 uint32_t u32Value, unsigned cb)
3281{
3282 ACPIState *pThis = PDMINS_2_DATA(pDevIns, ACPIState *);
3283
3284 Log2(("acpi: PCI config write: 0x%x -> 0x%x (%d)\n", u32Value, Address, cb));
3285 DEVACPI_LOCK_R3(pThis);
3286
3287 if (Address == VBOX_PCI_INTERRUPT_LINE)
3288 {
3289 Log(("acpi: ignore interrupt line settings: %d, we'll use hardcoded value %d\n", u32Value, SCI_INT));
3290 u32Value = SCI_INT;
3291 }
3292
3293 pThis->pfnAcpiPciConfigWrite(pDevIns, pPciDev, Address, u32Value, cb);
3294
3295 /* Assume that the base address is only changed when the corresponding
3296 * hardware functionality is disabled. The IO region is mapped when the
3297 * functionality is enabled by the guest. */
3298
3299 if (Address == PMREGMISC)
3300 {
3301 RTIOPORT NewIoPortBase = 0;
3302 /* Check Power Management IO Space Enable (PMIOSE) bit */
3303 if (pPciDev->abConfig[PMREGMISC] & 0x01)
3304 {
3305 NewIoPortBase = (RTIOPORT)PCIDevGetDWord(pPciDev, PMBA);
3306 NewIoPortBase &= 0xffc0;
3307 }
3308
3309 int rc = acpiR3UpdatePmHandlers(pThis, NewIoPortBase);
3310 AssertRC(rc);
3311 }
3312
3313 if (Address == SMBHSTCFG)
3314 {
3315 RTIOPORT NewIoPortBase = 0;
3316 /* Check SMBus Controller Host Interface Enable (SMB_HST_EN) bit */
3317 if (pPciDev->abConfig[SMBHSTCFG] & SMBHSTCFG_SMB_HST_EN)
3318 {
3319 NewIoPortBase = (RTIOPORT)PCIDevGetDWord(pPciDev, SMBBA);
3320 NewIoPortBase &= 0xfff0;
3321 }
3322
3323 int rc = acpiR3UpdateSMBusHandlers(pThis, NewIoPortBase);
3324 AssertRC(rc);
3325 }
3326
3327 DEVACPI_UNLOCK(pThis);
3328}
3329
3330/**
3331 * Attach a new CPU.
3332 *
3333 * @returns VBox status code.
3334 * @param pDevIns The device instance.
3335 * @param iLUN The logical unit which is being attached.
3336 * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines.
3337 *
3338 * @remarks This code path is not used during construction.
3339 */
3340static DECLCALLBACK(int) acpiR3Attach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags)
3341{
3342 ACPIState *pThis = PDMINS_2_DATA(pDevIns, ACPIState *);
3343 LogFlow(("acpiAttach: pDevIns=%p iLUN=%u fFlags=%#x\n", pDevIns, iLUN, fFlags));
3344
3345 AssertMsgReturn(!(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG),
3346 ("Hot-plug flag is not set\n"),
3347 VERR_NOT_SUPPORTED);
3348 AssertReturn(iLUN < VMM_MAX_CPU_COUNT, VERR_PDM_NO_SUCH_LUN);
3349
3350 /* Check if it was already attached */
3351 int rc = VINF_SUCCESS;
3352 DEVACPI_LOCK_R3(pThis);
3353 if (!VMCPUSET_IS_PRESENT(&pThis->CpuSetAttached, iLUN))
3354 {
3355 PPDMIBASE IBaseTmp;
3356 rc = PDMDevHlpDriverAttach(pDevIns, iLUN, &pThis->IBase, &IBaseTmp, "ACPI CPU");
3357 if (RT_SUCCESS(rc))
3358 {
3359 /* Enable the CPU */
3360 VMCPUSET_ADD(&pThis->CpuSetAttached, iLUN);
3361
3362 /*
3363 * Lock the CPU because we don't know if the guest will use it or not.
3364 * Prevents ejection while the CPU is still used
3365 */
3366 VMCPUSET_ADD(&pThis->CpuSetLocked, iLUN);
3367 pThis->u32CpuEventType = CPU_EVENT_TYPE_ADD;
3368 pThis->u32CpuEvent = iLUN;
3369
3370 /* Notify the guest */
3371 apicR3UpdateGpe0(pThis, pThis->gpe0_sts | 0x2, pThis->gpe0_en);
3372 }
3373 }
3374 DEVACPI_UNLOCK(pThis);
3375 return rc;
3376}
3377
3378/**
3379 * Detach notification.
3380 *
3381 * @param pDevIns The device instance.
3382 * @param iLUN The logical unit which is being detached.
3383 * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines.
3384 */
3385static DECLCALLBACK(void) acpiR3Detach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags)
3386{
3387 ACPIState *pThis = PDMINS_2_DATA(pDevIns, ACPIState *);
3388
3389 LogFlow(("acpiDetach: pDevIns=%p iLUN=%u fFlags=%#x\n", pDevIns, iLUN, fFlags));
3390
3391 AssertMsgReturnVoid(!(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG),
3392 ("Hot-plug flag is not set\n"));
3393
3394 /* Check if it was already detached */
3395 DEVACPI_LOCK_R3(pThis);
3396 if (VMCPUSET_IS_PRESENT(&pThis->CpuSetAttached, iLUN))
3397 {
3398 if (!VMCPUSET_IS_PRESENT(&pThis->CpuSetLocked, iLUN))
3399 {
3400 /* Disable the CPU */
3401 VMCPUSET_DEL(&pThis->CpuSetAttached, iLUN);
3402 pThis->u32CpuEventType = CPU_EVENT_TYPE_REMOVE;
3403 pThis->u32CpuEvent = iLUN;
3404
3405 /* Notify the guest */
3406 apicR3UpdateGpe0(pThis, pThis->gpe0_sts | 0x2, pThis->gpe0_en);
3407 }
3408 else
3409 AssertMsgFailed(("CPU is still locked by the guest\n"));
3410 }
3411 DEVACPI_UNLOCK(pThis);
3412}
3413
3414/**
3415 * @interface_method_impl{PDMDEVREG,pfnResume}
3416 */
3417static DECLCALLBACK(void) acpiR3Resume(PPDMDEVINS pDevIns)
3418{
3419 ACPIState *pThis = PDMINS_2_DATA(pDevIns, ACPIState *);
3420 if (pThis->fSetWakeupOnResume)
3421 {
3422 Log(("acpiResume: setting WAK_STS\n"));
3423 pThis->fSetWakeupOnResume = false;
3424 pThis->pm1a_sts |= WAK_STS;
3425 }
3426}
3427
3428/**
3429 * @interface_method_impl{PDMDEVREG,pfnMemSetup}
3430 */
3431static DECLCALLBACK(void) acpiR3MemSetup(PPDMDEVINS pDevIns, PDMDEVMEMSETUPCTX enmCtx)
3432{
3433 RT_NOREF1(enmCtx);
3434 ACPIState *pThis = PDMINS_2_DATA(pDevIns, ACPIState *);
3435 acpiR3PlantTables(pThis);
3436}
3437
3438/**
3439 * @interface_method_impl{PDMDEVREG,pfnReset}
3440 */
3441static DECLCALLBACK(void) acpiR3Reset(PPDMDEVINS pDevIns)
3442{
3443 ACPIState *pThis = PDMINS_2_DATA(pDevIns, ACPIState *);
3444
3445 /* Play safe: make sure that the IRQ isn't stuck after a reset. */
3446 acpiSetIrq(pThis, 0);
3447
3448 TMTimerLock(pThis->pPmTimerR3, VERR_IGNORED);
3449 pThis->pm1a_en = 0;
3450 pThis->pm1a_sts = 0;
3451 pThis->pm1a_ctl = 0;
3452 pThis->u64PmTimerInitial = TMTimerGet(pThis->pPmTimerR3);
3453 pThis->uPmTimerVal = 0;
3454 acpiR3PmTimerReset(pThis, pThis->u64PmTimerInitial);
3455 pThis->uBatteryIndex = 0;
3456 pThis->uSystemInfoIndex = 0;
3457 pThis->gpe0_en = 0;
3458 pThis->gpe0_sts = 0;
3459 pThis->uSleepState = 0;
3460 TMTimerUnlock(pThis->pPmTimerR3);
3461
3462 /* Real device behavior is resetting only the PM controller state,
3463 * but we're additionally doing the job of the BIOS. */
3464 acpiR3UpdatePmHandlers(pThis, PM_PORT_BASE);
3465 acpiR3PmPCIBIOSFake(pThis);
3466
3467 /* Reset SMBus base and PCI config space in addition to the SMBus controller
3468 * state. Real device behavior is only the SMBus controller state reset,
3469 * but we're additionally doing the job of the BIOS. */
3470 acpiR3UpdateSMBusHandlers(pThis, SMB_PORT_BASE);
3471 acpiR3SMBusPCIBIOSFake(pThis);
3472 acpiR3SMBusResetDevice(pThis);
3473}
3474
3475/**
3476 * @interface_method_impl{PDMDEVREG,pfnRelocate}
3477 */
3478static DECLCALLBACK(void) acpiR3Relocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta)
3479{
3480 ACPIState *pThis = PDMINS_2_DATA(pDevIns, ACPIState *);
3481 pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
3482 pThis->pPmTimerRC = TMTimerRCPtr(pThis->pPmTimerR3);
3483 NOREF(offDelta);
3484}
3485
3486/**
3487 * @interface_method_impl{PDMDEVREG,pfnDestruct}
3488 */
3489static DECLCALLBACK(int) acpiR3Destruct(PPDMDEVINS pDevIns)
3490{
3491 ACPIState *pThis = PDMINS_2_DATA(pDevIns, ACPIState *);
3492 if (pThis->pu8CustBin)
3493 {
3494 MMR3HeapFree(pThis->pu8CustBin);
3495 pThis->pu8CustBin = NULL;
3496 }
3497 return VINF_SUCCESS;
3498}
3499
3500/**
3501 * @interface_method_impl{PDMDEVREG,pfnConstruct}
3502 */
3503static DECLCALLBACK(int) acpiR3Construct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg)
3504{
3505 ACPIState *pThis = PDMINS_2_DATA(pDevIns, ACPIState *);
3506 PDMDEV_CHECK_VERSIONS_RETURN(pDevIns);
3507
3508 /*
3509 * Init data and set defaults.
3510 */
3511 /** @todo move more of the code up! */
3512
3513 pThis->pDevInsR3 = pDevIns;
3514 pThis->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns);
3515 pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
3516 VMCPUSET_EMPTY(&pThis->CpuSetAttached);
3517 VMCPUSET_EMPTY(&pThis->CpuSetLocked);
3518 pThis->idCpuLockCheck = UINT32_C(0xffffffff);
3519 pThis->u32CpuEventType = 0;
3520 pThis->u32CpuEvent = UINT32_C(0xffffffff);
3521
3522 /* The first CPU can't be attached/detached */
3523 VMCPUSET_ADD(&pThis->CpuSetAttached, 0);
3524 VMCPUSET_ADD(&pThis->CpuSetLocked, 0);
3525
3526 /* IBase */
3527 pThis->IBase.pfnQueryInterface = acpiR3QueryInterface;
3528 /* IACPIPort */
3529 pThis->IACPIPort.pfnSleepButtonPress = acpiR3Port_SleepButtonPress;
3530 pThis->IACPIPort.pfnPowerButtonPress = acpiR3Port_PowerButtonPress;
3531 pThis->IACPIPort.pfnGetPowerButtonHandled = acpiR3Port_GetPowerButtonHandled;
3532 pThis->IACPIPort.pfnGetGuestEnteredACPIMode = acpiR3Port_GetGuestEnteredACPIMode;
3533 pThis->IACPIPort.pfnGetCpuStatus = acpiR3Port_GetCpuStatus;
3534 pThis->IACPIPort.pfnMonitorHotPlugEvent = acpiR3Port_MonitorHotPlugEvent;
3535 pThis->IACPIPort.pfnBatteryStatusChangeEvent = acpiR3Port_BatteryStatusChangeEvent;
3536
3537 /*
3538 * Set the default critical section to NOP (related to the PM timer).
3539 */
3540 int rc = PDMDevHlpSetDeviceCritSect(pDevIns, PDMDevHlpCritSectGetNop(pDevIns));
3541 AssertRCReturn(rc, rc);
3542
3543 rc = PDMDevHlpCritSectInit(pDevIns, &pThis->CritSect, RT_SRC_POS, "acpi#%u", iInstance);
3544 AssertRCReturn(rc, rc);
3545
3546 /*
3547 * Validate and read the configuration.
3548 */
3549 if (!CFGMR3AreValuesValid(pCfg,
3550 "RamSize\0"
3551 "RamHoleSize\0"
3552 "IOAPIC\0"
3553 "NumCPUs\0"
3554 "GCEnabled\0"
3555 "R0Enabled\0"
3556 "HpetEnabled\0"
3557 "McfgEnabled\0"
3558 "McfgBase\0"
3559 "McfgLength\0"
3560 "SmcEnabled\0"
3561 "FdcEnabled\0"
3562 "ShowRtc\0"
3563 "ShowCpu\0"
3564 "NicPciAddress\0"
3565 "AudioPciAddress\0"
3566 "IocPciAddress\0"
3567 "HostBusPciAddress\0"
3568 "EnableSuspendToDisk\0"
3569 "PowerS1Enabled\0"
3570 "PowerS4Enabled\0"
3571 "CpuHotPlug\0"
3572 "AmlFilePath\0"
3573 "Serial0IoPortBase\0"
3574 "Serial1IoPortBase\0"
3575 "Serial2IoPortBase\0"
3576 "Serial3IoPortBase\0"
3577 "Serial0Irq\0"
3578 "Serial1Irq\0"
3579 "Serial2Irq\0"
3580 "Serial3Irq\0"
3581 "AcpiOemId\0"
3582 "AcpiCreatorId\0"
3583 "AcpiCreatorRev\0"
3584 "CustomTable\0"
3585 "SLICTable\0"
3586 "Parallel0IoPortBase\0"
3587 "Parallel1IoPortBase\0"
3588 "Parallel0Irq\0"
3589 "Parallel1Irq\0"
3590 ))
3591 return PDMDEV_SET_ERROR(pDevIns, VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES,
3592 N_("Configuration error: Invalid config key for ACPI device"));
3593
3594 /* query whether we are supposed to present an IOAPIC */
3595 rc = CFGMR3QueryU8Def(pCfg, "IOAPIC", &pThis->u8UseIOApic, 1);
3596 if (RT_FAILURE(rc))
3597 return PDMDEV_SET_ERROR(pDevIns, rc,
3598 N_("Configuration error: Failed to read \"IOAPIC\""));
3599
3600 rc = CFGMR3QueryU16Def(pCfg, "NumCPUs", &pThis->cCpus, 1);
3601 if (RT_FAILURE(rc))
3602 return PDMDEV_SET_ERROR(pDevIns, rc,
3603 N_("Configuration error: Querying \"NumCPUs\" as integer failed"));
3604
3605 /* query whether we are supposed to present an FDC controller */
3606 rc = CFGMR3QueryBoolDef(pCfg, "FdcEnabled", &pThis->fUseFdc, true);
3607 if (RT_FAILURE(rc))
3608 return PDMDEV_SET_ERROR(pDevIns, rc,
3609 N_("Configuration error: Failed to read \"FdcEnabled\""));
3610
3611 /* query whether we are supposed to present HPET */
3612 rc = CFGMR3QueryBoolDef(pCfg, "HpetEnabled", &pThis->fUseHpet, false);
3613 if (RT_FAILURE(rc))
3614 return PDMDEV_SET_ERROR(pDevIns, rc,
3615 N_("Configuration error: Failed to read \"HpetEnabled\""));
3616 /* query MCFG configuration */
3617 rc = CFGMR3QueryU64Def(pCfg, "McfgBase", &pThis->u64PciConfigMMioAddress, 0);
3618 if (RT_FAILURE(rc))
3619 return PDMDEV_SET_ERROR(pDevIns, rc,
3620 N_("Configuration error: Failed to read \"McfgBase\""));
3621 rc = CFGMR3QueryU64Def(pCfg, "McfgLength", &pThis->u64PciConfigMMioLength, 0);
3622 if (RT_FAILURE(rc))
3623 return PDMDEV_SET_ERROR(pDevIns, rc,
3624 N_("Configuration error: Failed to read \"McfgLength\""));
3625 pThis->fUseMcfg = (pThis->u64PciConfigMMioAddress != 0) && (pThis->u64PciConfigMMioLength != 0);
3626
3627 /* query whether we are supposed to present custom table */
3628 pThis->fUseCust = false;
3629
3630 /* query whether we are supposed to present SMC */
3631 rc = CFGMR3QueryBoolDef(pCfg, "SmcEnabled", &pThis->fUseSmc, false);
3632 if (RT_FAILURE(rc))
3633 return PDMDEV_SET_ERROR(pDevIns, rc,
3634 N_("Configuration error: Failed to read \"SmcEnabled\""));
3635
3636 /* query whether we are supposed to present RTC object */
3637 rc = CFGMR3QueryBoolDef(pCfg, "ShowRtc", &pThis->fShowRtc, false);
3638 if (RT_FAILURE(rc))
3639 return PDMDEV_SET_ERROR(pDevIns, rc,
3640 N_("Configuration error: Failed to read \"ShowRtc\""));
3641
3642 /* query whether we are supposed to present CPU objects */
3643 rc = CFGMR3QueryBoolDef(pCfg, "ShowCpu", &pThis->fShowCpu, false);
3644 if (RT_FAILURE(rc))
3645 return PDMDEV_SET_ERROR(pDevIns, rc,
3646 N_("Configuration error: Failed to read \"ShowCpu\""));
3647
3648 /* query primary NIC PCI address */
3649 rc = CFGMR3QueryU32Def(pCfg, "NicPciAddress", &pThis->u32NicPciAddress, 0);
3650 if (RT_FAILURE(rc))
3651 return PDMDEV_SET_ERROR(pDevIns, rc,
3652 N_("Configuration error: Failed to read \"NicPciAddress\""));
3653
3654 /* query primary NIC PCI address */
3655 rc = CFGMR3QueryU32Def(pCfg, "AudioPciAddress", &pThis->u32AudioPciAddress, 0);
3656 if (RT_FAILURE(rc))
3657 return PDMDEV_SET_ERROR(pDevIns, rc,
3658 N_("Configuration error: Failed to read \"AudioPciAddress\""));
3659
3660 /* query IO controller (southbridge) PCI address */
3661 rc = CFGMR3QueryU32Def(pCfg, "IocPciAddress", &pThis->u32IocPciAddress, 0);
3662 if (RT_FAILURE(rc))
3663 return PDMDEV_SET_ERROR(pDevIns, rc,
3664 N_("Configuration error: Failed to read \"IocPciAddress\""));
3665
3666 /* query host bus controller PCI address */
3667 rc = CFGMR3QueryU32Def(pCfg, "HostBusPciAddress", &pThis->u32HbcPciAddress, 0);
3668 if (RT_FAILURE(rc))
3669 return PDMDEV_SET_ERROR(pDevIns, rc,
3670 N_("Configuration error: Failed to read \"HostBusPciAddress\""));
3671
3672 /* query whether S1 power state should be exposed */
3673 rc = CFGMR3QueryBoolDef(pCfg, "PowerS1Enabled", &pThis->fS1Enabled, false);
3674 if (RT_FAILURE(rc))
3675 return PDMDEV_SET_ERROR(pDevIns, rc,
3676 N_("Configuration error: Failed to read \"PowerS1Enabled\""));
3677
3678 /* query whether S4 power state should be exposed */
3679 rc = CFGMR3QueryBoolDef(pCfg, "PowerS4Enabled", &pThis->fS4Enabled, false);
3680 if (RT_FAILURE(rc))
3681 return PDMDEV_SET_ERROR(pDevIns, rc,
3682 N_("Configuration error: Failed to read \"PowerS4Enabled\""));
3683
3684 /* query whether S1 power state should save the VM state */
3685 rc = CFGMR3QueryBoolDef(pCfg, "EnableSuspendToDisk", &pThis->fSuspendToSavedState, false);
3686 if (RT_FAILURE(rc))
3687 return PDMDEV_SET_ERROR(pDevIns, rc,
3688 N_("Configuration error: Failed to read \"EnableSuspendToDisk\""));
3689
3690 /* query whether we are allow CPU hot plugging */
3691 rc = CFGMR3QueryBoolDef(pCfg, "CpuHotPlug", &pThis->fCpuHotPlug, false);
3692 if (RT_FAILURE(rc))
3693 return PDMDEV_SET_ERROR(pDevIns, rc,
3694 N_("Configuration error: Failed to read \"CpuHotPlug\""));
3695
3696 rc = CFGMR3QueryBoolDef(pCfg, "GCEnabled", &pThis->fGCEnabled, true);
3697 if (RT_FAILURE(rc))
3698 return PDMDEV_SET_ERROR(pDevIns, rc,
3699 N_("Configuration error: Failed to read \"GCEnabled\""));
3700
3701 rc = CFGMR3QueryBoolDef(pCfg, "R0Enabled", &pThis->fR0Enabled, true);
3702 if (RT_FAILURE(rc))
3703 return PDMDEV_SET_ERROR(pDevIns, rc,
3704 N_("configuration error: failed to read \"R0Enabled\""));
3705
3706 /* query serial info */
3707 rc = CFGMR3QueryU8Def(pCfg, "Serial0Irq", &pThis->uSerial0Irq, 4);
3708 if (RT_FAILURE(rc))
3709 return PDMDEV_SET_ERROR(pDevIns, rc,
3710 N_("Configuration error: Failed to read \"Serial0Irq\""));
3711
3712 rc = CFGMR3QueryU16Def(pCfg, "Serial0IoPortBase", &pThis->uSerial0IoPortBase, 0x3f8);
3713 if (RT_FAILURE(rc))
3714 return PDMDEV_SET_ERROR(pDevIns, rc,
3715 N_("Configuration error: Failed to read \"Serial0IoPortBase\""));
3716
3717 /* Serial 1 is enabled, get config data */
3718 rc = CFGMR3QueryU8Def(pCfg, "Serial1Irq", &pThis->uSerial1Irq, 3);
3719 if (RT_FAILURE(rc))
3720 return PDMDEV_SET_ERROR(pDevIns, rc,
3721 N_("Configuration error: Failed to read \"Serial1Irq\""));
3722
3723 rc = CFGMR3QueryU16Def(pCfg, "Serial1IoPortBase", &pThis->uSerial1IoPortBase, 0x2f8);
3724 if (RT_FAILURE(rc))
3725 return PDMDEV_SET_ERROR(pDevIns, rc,
3726 N_("Configuration error: Failed to read \"Serial1IoPortBase\""));
3727
3728 /* Read serial port 2 settings; disabled if CFGM keys do not exist. */
3729 rc = CFGMR3QueryU8Def(pCfg, "Serial2Irq", &pThis->uSerial2Irq, 0);
3730 if (RT_FAILURE(rc))
3731 return PDMDEV_SET_ERROR(pDevIns, rc,
3732 N_("Configuration error: Failed to read \"Serial2Irq\""));
3733
3734 rc = CFGMR3QueryU16Def(pCfg, "Serial2IoPortBase", &pThis->uSerial2IoPortBase, 0);
3735 if (RT_FAILURE(rc))
3736 return PDMDEV_SET_ERROR(pDevIns, rc,
3737 N_("Configuration error: Failed to read \"Serial2IoPortBase\""));
3738
3739 /* Read serial port 3 settings; disabled if CFGM keys do not exist. */
3740 rc = CFGMR3QueryU8Def(pCfg, "Serial3Irq", &pThis->uSerial3Irq, 0);
3741 if (RT_FAILURE(rc))
3742 return PDMDEV_SET_ERROR(pDevIns, rc,
3743 N_("Configuration error: Failed to read \"Serial3Irq\""));
3744
3745 rc = CFGMR3QueryU16Def(pCfg, "Serial3IoPortBase", &pThis->uSerial3IoPortBase, 0);
3746 if (RT_FAILURE(rc))
3747 return PDMDEV_SET_ERROR(pDevIns, rc,
3748 N_("Configuration error: Failed to read \"Serial3IoPortBase\""));
3749 /*
3750 * Query settings for both parallel ports, if the CFGM keys don't exist pretend that
3751 * the corresponding parallel port is not enabled.
3752 */
3753 rc = CFGMR3QueryU8Def(pCfg, "Parallel0Irq", &pThis->uParallel0Irq, 0);
3754 if (RT_FAILURE(rc))
3755 return PDMDEV_SET_ERROR(pDevIns, rc,
3756 N_("Configuration error: Failed to read \"Parallel0Irq\""));
3757
3758 rc = CFGMR3QueryU16Def(pCfg, "Parallel0IoPortBase", &pThis->uParallel0IoPortBase, 0);
3759 if (RT_FAILURE(rc))
3760 return PDMDEV_SET_ERROR(pDevIns, rc,
3761 N_("Configuration error: Failed to read \"Parallel0IoPortBase\""));
3762
3763 rc = CFGMR3QueryU8Def(pCfg, "Parallel1Irq", &pThis->uParallel1Irq, 0);
3764 if (RT_FAILURE(rc))
3765 return PDMDEV_SET_ERROR(pDevIns, rc,
3766 N_("Configuration error: Failed to read \"Parallel1Irq\""));
3767
3768 rc = CFGMR3QueryU16Def(pCfg, "Parallel1IoPortBase", &pThis->uParallel1IoPortBase, 0);
3769 if (RT_FAILURE(rc))
3770 return PDMDEV_SET_ERROR(pDevIns, rc,
3771 N_("Configuration error: Failed to read \"Parallel1IoPortBase\""));
3772
3773 /* Try to attach the other CPUs */
3774 for (unsigned i = 1; i < pThis->cCpus; i++)
3775 {
3776 if (pThis->fCpuHotPlug)
3777 {
3778 PPDMIBASE IBaseTmp;
3779 rc = PDMDevHlpDriverAttach(pDevIns, i, &pThis->IBase, &IBaseTmp, "ACPI CPU");
3780
3781 if (RT_SUCCESS(rc))
3782 {
3783 VMCPUSET_ADD(&pThis->CpuSetAttached, i);
3784 VMCPUSET_ADD(&pThis->CpuSetLocked, i);
3785 Log(("acpi: Attached CPU %u\n", i));
3786 }
3787 else if (rc == VERR_PDM_NO_ATTACHED_DRIVER)
3788 Log(("acpi: CPU %u not attached yet\n", i));
3789 else
3790 return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to attach CPU object\n"));
3791 }
3792 else
3793 {
3794 /* CPU is always attached if hot-plug is not enabled. */
3795 VMCPUSET_ADD(&pThis->CpuSetAttached, i);
3796 VMCPUSET_ADD(&pThis->CpuSetLocked, i);
3797 }
3798 }
3799
3800 char *pszOemId = NULL;
3801 rc = CFGMR3QueryStringAllocDef(pCfg, "AcpiOemId", &pszOemId, "VBOX ");
3802 if (RT_FAILURE(rc))
3803 return PDMDEV_SET_ERROR(pDevIns, rc,
3804 N_("Configuration error: Querying \"AcpiOemId\" as string failed"));
3805 size_t cbOemId = strlen(pszOemId);
3806 if (cbOemId > 6)
3807 return PDMDEV_SET_ERROR(pDevIns, rc,
3808 N_("Configuration error: \"AcpiOemId\" must contain not more than 6 characters"));
3809 memset(pThis->au8OemId, ' ', sizeof(pThis->au8OemId));
3810 memcpy(pThis->au8OemId, pszOemId, cbOemId);
3811 MMR3HeapFree(pszOemId);
3812
3813 char *pszCreatorId = NULL;
3814 rc = CFGMR3QueryStringAllocDef(pCfg, "AcpiCreatorId", &pszCreatorId, "ASL ");
3815 if (RT_FAILURE(rc))
3816 return PDMDEV_SET_ERROR(pDevIns, rc,
3817 N_("Configuration error: Querying \"AcpiCreatorId\" as string failed"));
3818 size_t cbCreatorId = strlen(pszCreatorId);
3819 if (cbCreatorId > 4)
3820 return PDMDEV_SET_ERROR(pDevIns, rc,
3821 N_("Configuration error: \"AcpiCreatorId\" must contain not more than 4 characters"));
3822 memset(pThis->au8CreatorId, ' ', sizeof(pThis->au8CreatorId));
3823 memcpy(pThis->au8CreatorId, pszCreatorId, cbCreatorId);
3824 MMR3HeapFree(pszCreatorId);
3825
3826 rc = CFGMR3QueryU32Def(pCfg, "AcpiCreatorRev", &pThis->u32CreatorRev, RT_H2LE_U32(0x61));
3827 if (RT_FAILURE(rc))
3828 return PDMDEV_SET_ERROR(pDevIns, rc,
3829 N_("Configuration error: Querying \"AcpiCreatorRev\" as integer failed"));
3830 pThis->u32OemRevision = RT_H2LE_U32(0x1);
3831
3832 /*
3833 * Get the custom table binary file name.
3834 */
3835 char *pszCustBinFile;
3836 rc = CFGMR3QueryStringAlloc(pCfg, "CustomTable", &pszCustBinFile);
3837 if (rc == VERR_CFGM_VALUE_NOT_FOUND)
3838 rc = CFGMR3QueryStringAlloc(pCfg, "SLICTable", &pszCustBinFile);
3839 if (rc == VERR_CFGM_VALUE_NOT_FOUND)
3840 {
3841 pszCustBinFile = NULL;
3842 rc = VINF_SUCCESS;
3843 }
3844 else if (RT_FAILURE(rc))
3845 return PDMDEV_SET_ERROR(pDevIns, rc,
3846 N_("Configuration error: Querying \"CustomTable\" as a string failed"));
3847 else if (!*pszCustBinFile)
3848 {
3849 MMR3HeapFree(pszCustBinFile);
3850 pszCustBinFile = NULL;
3851 }
3852
3853 /*
3854 * Determine the custom table binary size, open specified ROM file in the process.
3855 */
3856 if (pszCustBinFile)
3857 {
3858 RTFILE FileCUSTBin;
3859 rc = RTFileOpen(&FileCUSTBin, pszCustBinFile,
3860 RTFILE_O_READ | RTFILE_O_OPEN | RTFILE_O_DENY_WRITE);
3861 if (RT_SUCCESS(rc))
3862 {
3863 rc = RTFileGetSize(FileCUSTBin, &pThis->cbCustBin);
3864 if (RT_SUCCESS(rc))
3865 {
3866 /* The following checks should be in sync the AssertReleaseMsg's below. */
3867 if ( pThis->cbCustBin > 3072
3868 || pThis->cbCustBin < sizeof(ACPITBLHEADER))
3869 rc = VERR_TOO_MUCH_DATA;
3870
3871 /*
3872 * Allocate buffer for the custom table binary data.
3873 */
3874 pThis->pu8CustBin = (uint8_t *)PDMDevHlpMMHeapAlloc(pDevIns, pThis->cbCustBin);
3875 if (pThis->pu8CustBin)
3876 {
3877 rc = RTFileRead(FileCUSTBin, pThis->pu8CustBin, pThis->cbCustBin, NULL);
3878 if (RT_FAILURE(rc))
3879 {
3880 AssertMsgFailed(("RTFileRead(,,%d,NULL) -> %Rrc\n", pThis->cbCustBin, rc));
3881 MMR3HeapFree(pThis->pu8CustBin);
3882 pThis->pu8CustBin = NULL;
3883 }
3884 else
3885 {
3886 pThis->fUseCust = true;
3887 memcpy(&pThis->au8OemId[0], &pThis->pu8CustBin[10], 6);
3888 memcpy(&pThis->au8OemTabId[0], &pThis->pu8CustBin[16], 8);
3889 memcpy(&pThis->u32OemRevision, &pThis->pu8CustBin[24], 4);
3890 memcpy(&pThis->au8CreatorId[0], &pThis->pu8CustBin[28], 4);
3891 memcpy(&pThis->u32CreatorRev, &pThis->pu8CustBin[32], 4);
3892 LogRel(("ACPI: Reading custom ACPI table from file '%s' (%d bytes)\n", pszCustBinFile,
3893 pThis->cbCustBin));
3894 }
3895 }
3896 else
3897 rc = VERR_NO_MEMORY;
3898
3899 RTFileClose(FileCUSTBin);
3900 }
3901 }
3902 MMR3HeapFree(pszCustBinFile);
3903 if (RT_FAILURE(rc))
3904 return PDMDEV_SET_ERROR(pDevIns, rc,
3905 N_("Error reading custom ACPI table"));
3906 }
3907
3908 /* Set default PM port base */
3909 pThis->uPmIoPortBase = PM_PORT_BASE;
3910
3911 /* Set default SMBus port base */
3912 pThis->uSMBusIoPortBase = SMB_PORT_BASE;
3913
3914 /*
3915 * FDC and SMC try to use the same non-shareable interrupt (6),
3916 * enable only one device.
3917 */
3918 if (pThis->fUseSmc)
3919 pThis->fUseFdc = false;
3920
3921 /*
3922 * Plant ACPI tables.
3923 */
3924 /** @todo Part of this is redone by acpiR3MemSetup, we only need to init the
3925 * au8RSDPPage here. However, there should be no harm in doing it
3926 * twice, so the lazy bird is taking the quick way out for now. */
3927 RTGCPHYS32 GCPhysRsdp = apicR3FindRsdpSpace();
3928 if (!GCPhysRsdp)
3929 return PDMDEV_SET_ERROR(pDevIns, VERR_NO_MEMORY,
3930 N_("Can not find space for RSDP. ACPI is disabled"));
3931
3932 rc = acpiR3PlantTables(pThis);
3933 if (RT_FAILURE(rc))
3934 return rc;
3935
3936 rc = PDMDevHlpROMRegister(pDevIns, GCPhysRsdp, 0x1000, pThis->au8RSDPPage, 0x1000,
3937 PGMPHYS_ROM_FLAGS_PERMANENT_BINARY, "ACPI RSDP");
3938 if (RT_FAILURE(rc))
3939 return rc;
3940
3941 /*
3942 * Register I/O ports.
3943 */
3944 rc = acpiR3RegisterPmHandlers(pThis);
3945 if (RT_FAILURE(rc))
3946 return rc;
3947
3948 rc = acpiR3RegisterSMBusHandlers(pThis);
3949 if (RT_FAILURE(rc))
3950 return rc;
3951
3952#define R(addr, cnt, writer, reader, description) \
3953 do { \
3954 rc = PDMDevHlpIOPortRegister(pDevIns, addr, cnt, pThis, writer, reader, \
3955 NULL, NULL, description); \
3956 if (RT_FAILURE(rc)) \
3957 return rc; \
3958 } while (0)
3959 R(SMI_CMD, 1, acpiR3SmiWrite, NULL, "ACPI SMI");
3960#ifdef DEBUG_ACPI
3961 R(DEBUG_HEX, 1, acpiR3DhexWrite, NULL, "ACPI Debug hex");
3962 R(DEBUG_CHR, 1, acpiR3DchrWrite, NULL, "ACPI Debug char");
3963#endif
3964 R(BAT_INDEX, 1, acpiR3BatIndexWrite, NULL, "ACPI Battery status index");
3965 R(BAT_DATA, 1, NULL, acpiR3BatDataRead, "ACPI Battery status data");
3966 R(SYSI_INDEX, 1, acpiR3SysInfoIndexWrite, NULL, "ACPI system info index");
3967 R(SYSI_DATA, 1, acpiR3SysInfoDataWrite, acpiR3SysInfoDataRead, "ACPI system info data");
3968 R(ACPI_RESET_BLK, 1, acpiR3ResetWrite, NULL, "ACPI Reset");
3969#undef R
3970
3971 /*
3972 * Create the PM timer.
3973 */
3974 PTMTIMER pTimer;
3975 rc = PDMDevHlpTMTimerCreate(pDevIns, TMCLOCK_VIRTUAL_SYNC, acpiR3PmTimer, &pThis->dev,
3976 TMTIMER_FLAGS_NO_CRIT_SECT, "ACPI PM Timer", &pTimer);
3977 AssertRCReturn(rc, rc);
3978 pThis->pPmTimerR3 = pTimer;
3979 pThis->pPmTimerR0 = TMTimerR0Ptr(pTimer);
3980 pThis->pPmTimerRC = TMTimerRCPtr(pTimer);
3981
3982 rc = TMTimerLock(pTimer, VERR_IGNORED);
3983 AssertRCReturn(rc, rc);
3984 pThis->u64PmTimerInitial = TMTimerGet(pTimer);
3985 acpiR3PmTimerReset(pThis, pThis->u64PmTimerInitial);
3986 TMTimerUnlock(pTimer);
3987
3988 /*
3989 * Set up the PCI device.
3990 */
3991 PCIDevSetVendorId(&pThis->dev, 0x8086); /* Intel */
3992 PCIDevSetDeviceId(&pThis->dev, 0x7113); /* 82371AB */
3993
3994 /* See p. 50 of PIIX4 manual */
3995 PCIDevSetCommand(&pThis->dev, 0x01);
3996 PCIDevSetStatus(&pThis->dev, 0x0280);
3997
3998 PCIDevSetRevisionId(&pThis->dev, 0x08);
3999
4000 PCIDevSetClassProg(&pThis->dev, 0x00);
4001 PCIDevSetClassSub(&pThis->dev, 0x80);
4002 PCIDevSetClassBase(&pThis->dev, 0x06);
4003
4004 PCIDevSetHeaderType(&pThis->dev, 0x80);
4005
4006 PCIDevSetBIST(&pThis->dev, 0x00);
4007
4008 PCIDevSetInterruptLine(&pThis->dev, SCI_INT);
4009 PCIDevSetInterruptPin (&pThis->dev, 0x01);
4010
4011 Assert((pThis->uPmIoPortBase & 0x003f) == 0);
4012 acpiR3PmPCIBIOSFake(pThis);
4013
4014 Assert((pThis->uSMBusIoPortBase & 0x000f) == 0);
4015 acpiR3SMBusPCIBIOSFake(pThis);
4016 acpiR3SMBusResetDevice(pThis);
4017
4018 rc = PDMDevHlpPCIRegister(pDevIns, &pThis->dev);
4019 if (RT_FAILURE(rc))
4020 return rc;
4021
4022 PDMDevHlpPCISetConfigCallbacks(pDevIns, &pThis->dev,
4023 acpiR3PciConfigRead, &pThis->pfnAcpiPciConfigRead,
4024 acpiR3PciConfigWrite, &pThis->pfnAcpiPciConfigWrite);
4025
4026 /*
4027 * Register the saved state.
4028 */
4029 rc = PDMDevHlpSSMRegister(pDevIns, 8, sizeof(*pThis), acpiR3SaveState, acpiR3LoadState);
4030 if (RT_FAILURE(rc))
4031 return rc;
4032
4033 /*
4034 * Get the corresponding connector interface
4035 */
4036 rc = PDMDevHlpDriverAttach(pDevIns, 0, &pThis->IBase, &pThis->pDrvBase, "ACPI Driver Port");
4037 if (RT_SUCCESS(rc))
4038 {
4039 pThis->pDrv = PDMIBASE_QUERY_INTERFACE(pThis->pDrvBase, PDMIACPICONNECTOR);
4040 if (!pThis->pDrv)
4041 return PDMDEV_SET_ERROR(pDevIns, VERR_PDM_MISSING_INTERFACE,
4042 N_("LUN #0 doesn't have an ACPI connector interface"));
4043 }
4044 else if (rc == VERR_PDM_NO_ATTACHED_DRIVER)
4045 {
4046 Log(("acpi: %s/%d: warning: no driver attached to LUN #0!\n",
4047 pDevIns->pReg->szName, pDevIns->iInstance));
4048 rc = VINF_SUCCESS;
4049 }
4050 else
4051 return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to attach LUN #0"));
4052
4053 return rc;
4054}
4055
4056/**
4057 * The device registration structure.
4058 */
4059const PDMDEVREG g_DeviceACPI =
4060{
4061 /* u32Version */
4062 PDM_DEVREG_VERSION,
4063 /* szName */
4064 "acpi",
4065 /* szRCMod */
4066 "VBoxDDRC.rc",
4067 /* szR0Mod */
4068 "VBoxDDR0.r0",
4069 /* pszDescription */
4070 "Advanced Configuration and Power Interface",
4071 /* fFlags */
4072 PDM_DEVREG_FLAGS_DEFAULT_BITS | PDM_DEVREG_FLAGS_RC | PDM_DEVREG_FLAGS_R0,
4073 /* fClass */
4074 PDM_DEVREG_CLASS_ACPI,
4075 /* cMaxInstances */
4076 ~0U,
4077 /* cbInstance */
4078 sizeof(ACPIState),
4079 /* pfnConstruct */
4080 acpiR3Construct,
4081 /* pfnDestruct */
4082 acpiR3Destruct,
4083 /* pfnRelocate */
4084 acpiR3Relocate,
4085 /* pfnMemSetup */
4086 acpiR3MemSetup,
4087 /* pfnPowerOn */
4088 NULL,
4089 /* pfnReset */
4090 acpiR3Reset,
4091 /* pfnSuspend */
4092 NULL,
4093 /* pfnResume */
4094 acpiR3Resume,
4095 /* pfnAttach */
4096 acpiR3Attach,
4097 /* pfnDetach */
4098 acpiR3Detach,
4099 /* pfnQueryInterface. */
4100 NULL,
4101 /* pfnInitComplete */
4102 NULL,
4103 /* pfnPowerOff */
4104 NULL,
4105 /* pfnSoftReset */
4106 NULL,
4107 /* u32VersionEnd */
4108 PDM_DEVREG_VERSION
4109};
4110
4111#endif /* IN_RING3 */
4112#endif /* !VBOX_DEVICE_STRUCT_TESTCASE */
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette