DevPit-i8254.cpp@ 9212

Last change on this file since 9212 was 9212, checked in by vboxsync, 17 years ago

Major changes for sizeof(RTGCPTR) == uint64_t.
Introduced RCPTRTYPE for pointers valid in raw mode only (RTGCPTR32).

Disabled by default. Enable by adding VBOX_WITH_64_BITS_GUESTS to your LocalConfig.kmk.

Property svn:eol-style set to native
Property svn:keywords set to Id

File size: 36.7 KB

Line
1	/** $Id: DevPit-i8254.cpp 9212 2008-05-29 09:38:38Z vboxsync $ */
2	/** @file
3	* Intel 8254 Programmable Interval Timer (PIT) And Dummy Speaker Device.
4	*/
5
6	/*
7	* Copyright (C) 2006-2007 Sun Microsystems, Inc.
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*
17	* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
18	* Clara, CA 95054 USA or visit http://www.sun.com if you need
19	* additional information or have any questions.
20	* --------------------------------------------------------------------
21	*
22	* This code is based on:
23	*
24	* QEMU 8253/8254 interval timer emulation
25	*
26	* Copyright (c) 2003-2004 Fabrice Bellard
27	*
28	* Permission is hereby granted, free of charge, to any person obtaining a copy
29	* of this software and associated documentation files (the "Software"), to deal
30	* in the Software without restriction, including without limitation the rights
31	* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
32	* copies of the Software, and to permit persons to whom the Software is
33	* furnished to do so, subject to the following conditions:
34	*
35	* The above copyright notice and this permission notice shall be included in
36	* all copies or substantial portions of the Software.
37	*
38	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
39	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
40	* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
41	* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
42	* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
43	* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
44	* THE SOFTWARE.
45	*/
46
47
48	/*******************************************************************************
49	* Header Files *
50	*******************************************************************************/
51	#define LOG_GROUP LOG_GROUP_DEV_PIT
52	#include <VBox/pdmdev.h>
53	#include <VBox/log.h>
54	#include <VBox/stam.h>
55	#include <iprt/assert.h>
56	#include <iprt/asm.h>
57
58	#include "Builtins.h"
59
60	/*******************************************************************************
61	* Defined Constants And Macros *
62	*******************************************************************************/
63	/** The PIT frequency. */
64	#define PIT_FREQ 1193182
65
66	#define RW_STATE_LSB 1
67	#define RW_STATE_MSB 2
68	#define RW_STATE_WORD0 3
69	#define RW_STATE_WORD1 4
70
71	/** The version of the saved state. */
72	#define PIT_SAVED_STATE_VERSION 2
73
74	/** @def FAKE_REFRESH_CLOCK
75	* Define this to flip the 15usec refresh bit on every read.
76	* If not defined, it will be flipped correctly. */
77	//#define FAKE_REFRESH_CLOCK
78
79	/*******************************************************************************
80	* Structures and Typedefs *
81	*******************************************************************************/
82	typedef struct PITChannelState
83	{
84	/** Pointer to the instance data - HCPtr. */
85	R3R0PTRTYPE(struct PITState *) pPitHC;
86	/** The timer - HCPtr. */
87	R3R0PTRTYPE(PTMTIMER) pTimerHC;
88	/** Pointer to the instance data - GCPtr. */
89	RCPTRTYPE(struct PITState *) pPitGC;
90	/** The timer - HCPtr. */
91	PTMTIMERGC pTimerGC;
92	/** The virtual time stamp at the last reload. (only used in mode 2 for now) */
93	uint64_t u64ReloadTS;
94	/** The actual time of the next tick.
95	* As apposed to the next_transition_time which contains the correct time of the next tick. */
96	uint64_t u64NextTS;
97
98	/** (count_load_time is only set by TMTimerGet() which returns uint64_t) */
99	uint64_t count_load_time;
100	/* irq handling */
101	int64_t next_transition_time;
102	int32_t irq;
103	/** Number of release log entries. Used to prevent floading. */
104	uint32_t cRelLogEntries;
105
106	uint32_t count; /* can be 65536 */
107	uint16_t latched_count;
108	uint8_t count_latched;
109	uint8_t status_latched;
110
111	uint8_t status;
112	uint8_t read_state;
113	uint8_t write_state;
114	uint8_t write_latch;
115
116	uint8_t rw_mode;
117	uint8_t mode;
118	uint8_t bcd; /* not supported */
119	uint8_t gate; /* timer start */
120
121	} PITChannelState;
122
123	typedef struct PITState
124	{
125	PITChannelState channels[3];
126	/** Speaker data. */
127	int32_t speaker_data_on;
128	#ifdef FAKE_REFRESH_CLOCK
129	/** Speaker dummy. */
130	int32_t dummy_refresh_clock;
131	#else
132	uint32_t Alignment1;
133	#endif
134	/** Pointer to the device instance. */
135	R3PTRTYPE(PPDMDEVINS) pDevIns;
136	#if HC_ARCH_BITS == 32
137	uint32_t Alignment0;
138	#endif
139	/** Number of IRQs that's been raised. */
140	STAMCOUNTER StatPITIrq;
141	/** Profiling the timer callback handler. */
142	STAMPROFILEADV StatPITHandler;
143	} PITState;
144
145
146	#ifndef VBOX_DEVICE_STRUCT_TESTCASE
147	/*******************************************************************************
148	* Internal Functions *
149	*******************************************************************************/
150	__BEGIN_DECLS
151	PDMBOTHCBDECL(int) pitIOPortRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb);
152	PDMBOTHCBDECL(int) pitIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb);
153	PDMBOTHCBDECL(int) pitIOPortSpeakerRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb);
154	#ifdef IN_RING3
155	PDMBOTHCBDECL(int) pitIOPortSpeakerWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb);
156	static void pit_irq_timer_update(PITChannelState *s, uint64_t current_time);
157	#endif
158	__END_DECLS
159
160
161
162
163	static int pit_get_count(PITChannelState *s)
164	{
165	uint64_t d;
166	int counter;
167	PTMTIMER pTimer = s->CTXSUFF(pPit)->channels[0].CTXSUFF(pTimer);
168
169	if (s->mode == 2) /** @todo Implement proper virtual time and get rid of this hack.. */
170	{
171	#if 0
172	d = TMTimerGet(pTimer);
173	d -= s->u64ReloadTS;
174	d = ASMMultU64ByU32DivByU32(d, PIT_FREQ, TMTimerGetFreq(pTimer));
175	#else /* variable time because of catch up */
176	if (s->u64NextTS == UINT64_MAX)
177	return 1; /** @todo check this value. */
178	d = TMTimerGet(pTimer);
179	d = ASMMultU64ByU32DivByU32(d - s->u64ReloadTS, s->count, s->u64NextTS - s->u64ReloadTS);
180	#endif
181	if (d >= s->count)
182	return 1;
183	return s->count - d;
184	}
185	d = ASMMultU64ByU32DivByU32(TMTimerGet(pTimer) - s->count_load_time, PIT_FREQ, TMTimerGetFreq(pTimer));
186	switch(s->mode) {
187	case 0:
188	case 1:
189	case 4:
190	case 5:
191	counter = (s->count - d) & 0xffff;
192	break;
193	case 3:
194	/* XXX: may be incorrect for odd counts */
195	counter = s->count - ((2 * d) % s->count);
196	break;
197	default:
198	counter = s->count - (d % s->count);
199	break;
200	}
201	/** @todo check that we don't return 0, in most modes (all?) the counter shouldn't be zero. */
202	return counter;
203	}
204
205	/* get pit output bit */
206	static int pit_get_out1(PITChannelState *s, int64_t current_time)
207	{
208	uint64_t d;
209	PTMTIMER pTimer = s->CTXSUFF(pPit)->channels[0].CTXSUFF(pTimer);
210	int out;
211
212	d = ASMMultU64ByU32DivByU32(current_time - s->count_load_time, PIT_FREQ, TMTimerGetFreq(pTimer));
213	switch(s->mode) {
214	default:
215	case 0:
216	out = (d >= s->count);
217	break;
218	case 1:
219	out = (d < s->count);
220	break;
221	case 2:
222	Log2(("pit_get_out1: d=%llx c=%x %x \n", d, s->count, (unsigned)(d % s->count)));
223	if ((d % s->count) == 0 && d != 0)
224	out = 1;
225	else
226	out = 0;
227	break;
228	case 3:
229	out = (d % s->count) < ((s->count + 1) >> 1);
230	break;
231	case 4:
232	case 5:
233	out = (d == s->count);
234	break;
235	}
236	return out;
237	}
238
239
240	static int pit_get_out(PITState *pit, int channel, int64_t current_time)
241	{
242	PITChannelState *s = &pit->channels[channel];
243	return pit_get_out1(s, current_time);
244	}
245
246
247	static int pit_get_gate(PITState *pit, int channel)
248	{
249	PITChannelState *s = &pit->channels[channel];
250	return s->gate;
251	}
252
253
254	/* if already latched, do not latch again */
255	static void pit_latch_count(PITChannelState *s)
256	{
257	if (!s->count_latched) {
258	s->latched_count = pit_get_count(s);
259	s->count_latched = s->rw_mode;
260	LogFlow(("pit_latch_count: latched_count=%#06x / %10RU64 ns (c=%#06x m=%d)\n",
261	s->latched_count, ASMMultU64ByU32DivByU32(s->count - s->latched_count, 1000000000, PIT_FREQ), s->count, s->mode));
262	}
263	}
264
265	#ifdef IN_RING3
266
267	/* val must be 0 or 1 */
268	static void pit_set_gate(PITState *pit, int channel, int val)
269	{
270	PITChannelState *s = &pit->channels[channel];
271	PTMTIMER pTimer = s->CTXSUFF(pPit)->channels[0].CTXSUFF(pTimer);
272	Assert((val & 1) == val);
273
274	switch(s->mode) {
275	default:
276	case 0:
277	case 4:
278	/* XXX: just disable/enable counting */
279	break;
280	case 1:
281	case 5:
282	if (s->gate < val) {
283	/* restart counting on rising edge */
284	s->count_load_time = TMTimerGet(pTimer);
285	pit_irq_timer_update(s, s->count_load_time);
286	}
287	break;
288	case 2:
289	case 3:
290	if (s->gate < val) {
291	/* restart counting on rising edge */
292	s->count_load_time = s->u64ReloadTS = TMTimerGet(pTimer);
293	pit_irq_timer_update(s, s->count_load_time);
294	}
295	/* XXX: disable/enable counting */
296	break;
297	}
298	s->gate = val;
299	}
300
301	static inline void pit_load_count(PITChannelState *s, int val)
302	{
303	PTMTIMER pTimer = s->CTXSUFF(pPit)->channels[0].CTXSUFF(pTimer);
304	if (val == 0)
305	val = 0x10000;
306	s->count_load_time = s->u64ReloadTS = TMTimerGet(pTimer);
307	s->count = val;
308	pit_irq_timer_update(s, s->count_load_time);
309
310	/* log the new rate (ch 0 only). */
311	if ( s->pTimerHC /* ch 0 */
312	&& s->cRelLogEntries++ < 32)
313	LogRel(("PIT: mode=%d count=%#x (%u) - %d.%02d Hz (ch=0)\n",
314	s->mode, s->count, s->count, PIT_FREQ / s->count, (PIT_FREQ * 100 / s->count) % 100));
315	}
316
317	/* return -1 if no transition will occur. */
318	static int64_t pit_get_next_transition_time(PITChannelState *s,
319	uint64_t current_time)
320	{
321	PTMTIMER pTimer = s->CTXSUFF(pPit)->channels[0].CTXSUFF(pTimer);
322	uint64_t d, next_time, base;
323	uint32_t period2;
324
325	d = ASMMultU64ByU32DivByU32(current_time - s->count_load_time, PIT_FREQ, TMTimerGetFreq(pTimer));
326	switch(s->mode) {
327	default:
328	case 0:
329	case 1:
330	if (d < s->count)
331	next_time = s->count;
332	else
333	return -1;
334	break;
335	/*
336	* Mode 2: The period is count + 1 PIT ticks.
337	* When the counter reaches 1 we sent the output low (for channel 0 that
338	* means raise an irq). On the next tick, where we should be decrementing
339	* from 1 to 0, the count is loaded and the output goes high (channel 0
340	* means clearing the irq).
341	*
342	* In VBox we simplify the tick cycle between 1 and 0 and immediately clears
343	* the irq. We also don't set it until we reach 0, which is a tick late - will
344	* try fix that later some day.
345	*/
346	case 2:
347	base = (d / s->count) * s->count;
348	#ifndef VBOX /* see above */
349	if ((d - base) == 0 && d != 0)
350	next_time = base + s->count;
351	else
352	#endif
353	next_time = base + s->count + 1;
354	break;
355	case 3:
356	base = (d / s->count) * s->count;
357	period2 = ((s->count + 1) >> 1);
358	if ((d - base) < period2)
359	next_time = base + period2;
360	else
361	next_time = base + s->count;
362	break;
363	case 4:
364	case 5:
365	if (d < s->count)
366	next_time = s->count;
367	else if (d == s->count)
368	next_time = s->count + 1;
369	else
370	return -1;
371	break;
372	}
373	/* convert to timer units */
374	LogFlow(("PIT: next_time=%14RI64 %20RI64 mode=%#x count=%#06x\n", next_time,
375	ASMMultU64ByU32DivByU32(next_time, TMTimerGetFreq(pTimer), PIT_FREQ), s->mode, s->count));
376	next_time = s->count_load_time + ASMMultU64ByU32DivByU32(next_time, TMTimerGetFreq(pTimer), PIT_FREQ);
377	/* fix potential rounding problems */
378	/* XXX: better solution: use a clock at PIT_FREQ Hz */
379	if (next_time <= current_time)
380	next_time = current_time + 1;
381	return next_time;
382	}
383
384	static void pit_irq_timer_update(PITChannelState *s, uint64_t current_time)
385	{
386	uint64_t now;
387	int64_t expire_time;
388	int irq_level;
389	PPDMDEVINS pDevIns;
390	PTMTIMER pTimer = s->CTXSUFF(pPit)->channels[0].CTXSUFF(pTimer);
391
392	if (!s->CTXSUFF(pTimer))
393	return;
394	expire_time = pit_get_next_transition_time(s, current_time);
395	irq_level = pit_get_out1(s, current_time);
396
397	/* We just flip-flop the irq level to save that extra timer call, which isn't generally required (we haven't served it for months). */
398	pDevIns = s->CTXSUFF(pPit)->pDevIns;
399	PDMDevHlpISASetIrq(pDevIns, s->irq, irq_level);
400	if (irq_level)
401	PDMDevHlpISASetIrq(pDevIns, s->irq, 0);
402	now = TMTimerGet(pTimer);
403	Log3(("pit_irq_timer_update: %lldns late\n", now - s->u64NextTS));
404	if (irq_level)
405	{
406	s->u64ReloadTS = now;
407	STAM_COUNTER_INC(&s->CTXSUFF(pPit)->StatPITIrq);
408	}
409
410	if (expire_time != -1)
411	{
412	s->u64NextTS = expire_time;
413	TMTimerSet(s->CTXSUFF(pTimer), s->u64NextTS);
414	}
415	else
416	{
417	LogFlow(("PIT: m=%d count=%#4x irq_level=%#x stopped\n", s->mode, s->count, irq_level));
418	TMTimerStop(s->CTXSUFF(pTimer));
419	s->u64NextTS = UINT64_MAX;
420	}
421	s->next_transition_time = expire_time;
422	}
423
424	#endif /* IN_RING3 */
425
426
427	/**
428	* Port I/O Handler for IN operations.
429	*
430	* @returns VBox status code.
431	*
432	* @param pDevIns The device instance.
433	* @param pvUser User argument - ignored.
434	* @param Port Port number used for the IN operation.
435	* @param pu32 Where to store the result.
436	* @param cb Number of bytes read.
437	*/
438	PDMBOTHCBDECL(int) pitIOPortRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb)
439	{
440	Log2(("pitIOPortRead: Port=%#x cb=%x\n", Port, cb));
441	NOREF(pvUser);
442	Port &= 3;
443	if (cb != 1 \|\| Port == 3)
444	{
445	Log(("pitIOPortRead: Port=%#x cb=%x *pu32=unused!\n", Port, cb));
446	return VERR_IOM_IOPORT_UNUSED;
447	}
448
449	PITState pit = PDMINS2DATA(pDevIns, PITState );
450	int ret;
451	PITChannelState *s = &pit->channels[Port];
452	if (s->status_latched)
453	{
454	s->status_latched = 0;
455	ret = s->status;
456	}
457	else if (s->count_latched)
458	{
459	switch (s->count_latched)
460	{
461	default:
462	case RW_STATE_LSB:
463	ret = s->latched_count & 0xff;
464	s->count_latched = 0;
465	break;
466	case RW_STATE_MSB:
467	ret = s->latched_count >> 8;
468	s->count_latched = 0;
469	break;
470	case RW_STATE_WORD0:
471	ret = s->latched_count & 0xff;
472	s->count_latched = RW_STATE_MSB;
473	break;
474	}
475	}
476	else
477	{
478	int count;
479	switch (s->read_state)
480	{
481	default:
482	case RW_STATE_LSB:
483	count = pit_get_count(s);
484	ret = count & 0xff;
485	break;
486	case RW_STATE_MSB:
487	count = pit_get_count(s);
488	ret = (count >> 8) & 0xff;
489	break;
490	case RW_STATE_WORD0:
491	count = pit_get_count(s);
492	ret = count & 0xff;
493	s->read_state = RW_STATE_WORD1;
494	break;
495	case RW_STATE_WORD1:
496	count = pit_get_count(s);
497	ret = (count >> 8) & 0xff;
498	s->read_state = RW_STATE_WORD0;
499	break;
500	}
501	}
502
503	*pu32 = ret;
504	Log2(("pitIOPortRead: Port=%#x cb=%x pu32=%#04x\n", Port, cb, pu32));
505	return VINF_SUCCESS;
506	}
507
508
509	/**
510	* Port I/O Handler for OUT operations.
511	*
512	* @returns VBox status code.
513	*
514	* @param pDevIns The device instance.
515	* @param pvUser User argument - ignored.
516	* @param Port Port number used for the IN operation.
517	* @param u32 The value to output.
518	* @param cb The value size in bytes.
519	*/
520	PDMBOTHCBDECL(int) pitIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
521	{
522	Log2(("pitIOPortWrite: Port=%#x cb=%x u32=%#04x\n", Port, cb, u32));
523	NOREF(pvUser);
524	if (cb != 1)
525	return VINF_SUCCESS;
526
527	PITState pit = PDMINS2DATA(pDevIns, PITState );
528	Port &= 3;
529	if (Port == 3)
530	{
531	/*
532	* Port 43h - Mode/Command Register.
533	* 7 6 5 4 3 2 1 0
534	* * * . . . . . . Select channel: 0 0 = Channel 0
535	* 0 1 = Channel 1
536	* 1 0 = Channel 2
537	* 1 1 = Read-back command (8254 only)
538	* (Illegal on 8253)
539	* (Illegal on PS/2 {JAM})
540	* . . * * . . . . Command/Access mode: 0 0 = Latch count value command
541	* 0 1 = Access mode: lobyte only
542	* 1 0 = Access mode: hibyte only
543	* 1 1 = Access mode: lobyte/hibyte
544	* . . . . * * * . Operating mode: 0 0 0 = Mode 0, 0 0 1 = Mode 1,
545	* 0 1 0 = Mode 2, 0 1 1 = Mode 3,
546	* 1 0 0 = Mode 4, 1 0 1 = Mode 5,
547	* 1 1 0 = Mode 2, 1 1 1 = Mode 3
548	* . . . . . . . * BCD/Binary mode: 0 = 16-bit binary, 1 = four-digit BCD
549	*/
550	unsigned channel = u32 >> 6;
551	if (channel == 3)
552	{
553	/* read-back command */
554	for (channel = 0; channel < ELEMENTS(pit->channels); channel++)
555	{
556	PITChannelState *s = &pit->channels[channel];
557	if (u32 & (2 << channel)) {
558	if (!(u32 & 0x20))
559	pit_latch_count(s);
560	if (!(u32 & 0x10) && !s->status_latched)
561	{
562	/* status latch */
563	/* XXX: add BCD and null count */
564	PTMTIMER pTimer = s->CTXSUFF(pPit)->channels[0].CTXSUFF(pTimer);
565	s->status = (pit_get_out1(s, TMTimerGet(pTimer)) << 7)
566	\| (s->rw_mode << 4)
567	\| (s->mode << 1)
568	\| s->bcd;
569	s->status_latched = 1;
570	}
571	}
572	}
573	}
574	else
575	{
576	PITChannelState *s = &pit->channels[channel];
577	unsigned access = (u32 >> 4) & 3;
578	if (access == 0)
579	pit_latch_count(s);
580	else
581	{
582	s->rw_mode = access;
583	s->read_state = access;
584	s->write_state = access;
585
586	s->mode = (u32 >> 1) & 7;
587	s->bcd = u32 & 1;
588	/* XXX: update irq timer ? */
589	}
590	}
591	}
592	else
593	{
594	#ifndef IN_RING3
595	return VINF_IOM_HC_IOPORT_WRITE;
596	#else /* IN_RING3 */
597	/*
598	* Port 40-42h - Channel Data Ports.
599	*/
600	PITChannelState *s = &pit->channels[Port];
601	switch(s->write_state)
602	{
603	default:
604	case RW_STATE_LSB:
605	pit_load_count(s, u32);
606	break;
607	case RW_STATE_MSB:
608	pit_load_count(s, u32 << 8);
609	break;
610	case RW_STATE_WORD0:
611	s->write_latch = u32;
612	s->write_state = RW_STATE_WORD1;
613	break;
614	case RW_STATE_WORD1:
615	pit_load_count(s, s->write_latch \| (u32 << 8));
616	s->write_state = RW_STATE_WORD0;
617	break;
618	}
619	#endif /* !IN_RING3 */
620	}
621	return VINF_SUCCESS;
622	}
623
624
625	/**
626	* Port I/O Handler for speaker IN operations.
627	*
628	* @returns VBox status code.
629	*
630	* @param pDevIns The device instance.
631	* @param pvUser User argument - ignored.
632	* @param Port Port number used for the IN operation.
633	* @param pu32 Where to store the result.
634	* @param cb Number of bytes read.
635	*/
636	PDMBOTHCBDECL(int) pitIOPortSpeakerRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb)
637	{
638	NOREF(pvUser);
639	if (cb == 1)
640	{
641	PITState pData = PDMINS2DATA(pDevIns, PITState );
642	const uint64_t u64Now = TMTimerGet(pData->channels[0].CTXSUFF(pTimer));
643	Assert(TMTimerGetFreq(pData->channels[0].CTXSUFF(pTimer)) == 1000000000); /* lazy bird. */
644
645	/* bit 6,7 Parity error stuff. */
646	/* bit 5 - mirrors timer 2 output condition. */
647	const int fOut = pit_get_out(pData, 2, u64Now);
648	/* bit 4 - toggled every with each (DRAM?) refresh request, every 15.085 µs. */
649	#ifdef FAKE_REFRESH_CLOCK
650	pData->dummy_refresh_clock ^= 1;
651	const int fRefresh = pData->dummy_refresh_clock;
652	#else
653	const int fRefresh = (u64Now / 15085) & 1;
654	#endif
655	/* bit 2,3 NMI / parity status stuff. */
656	/* bit 1 - speaker data status */
657	const int fSpeakerStatus = pData->speaker_data_on;
658	/* bit 0 - timer 2 clock gate to speaker status. */
659	const int fTimer2GateStatus = pit_get_gate(pData, 2);
660
661	*pu32 = fTimer2GateStatus
662	\| (fSpeakerStatus << 1)
663	\| (fRefresh << 4)
664	\| (fOut << 5);
665	Log(("pitIOPortSpeakerRead: Port=%#x cb=%x pu32=%#x\n", Port, cb, pu32));
666	return VINF_SUCCESS;
667	}
668	Log(("pitIOPortSpeakerRead: Port=%#x cb=%x *pu32=unused!\n", Port, cb));
669	return VERR_IOM_IOPORT_UNUSED;
670	}
671
672	#ifdef IN_RING3
673
674	/**
675	* Port I/O Handler for speaker OUT operations.
676	*
677	* @returns VBox status code.
678	*
679	* @param pDevIns The device instance.
680	* @param pvUser User argument - ignored.
681	* @param Port Port number used for the IN operation.
682	* @param u32 The value to output.
683	* @param cb The value size in bytes.
684	*/
685	PDMBOTHCBDECL(int) pitIOPortSpeakerWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
686	{
687	NOREF(pvUser);
688	if (cb == 1)
689	{
690	PITState pData = PDMINS2DATA(pDevIns, PITState );
691	pData->speaker_data_on = (u32 >> 1) & 1;
692	pit_set_gate(pData, 2, u32 & 1);
693	}
694	Log(("pitIOPortSpeakerWrite: Port=%#x cb=%x u32=%#x\n", Port, cb, u32));
695	return VINF_SUCCESS;
696	}
697
698
699	/**
700	* Saves a state of the programmable interval timer device.
701	*
702	* @returns VBox status code.
703	* @param pDevIns The device instance.
704	* @param pSSMHandle The handle to save the state to.
705	*/
706	static DECLCALLBACK(int) pitSaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle)
707	{
708	PITState pData = PDMINS2DATA(pDevIns, PITState );
709	unsigned i;
710
711	for (i = 0; i < ELEMENTS(pData->channels); i++)
712	{
713	PITChannelState *s = &pData->channels[i];
714	SSMR3PutU32(pSSMHandle, s->count);
715	SSMR3PutU16(pSSMHandle, s->latched_count);
716	SSMR3PutU8(pSSMHandle, s->count_latched);
717	SSMR3PutU8(pSSMHandle, s->status_latched);
718	SSMR3PutU8(pSSMHandle, s->status);
719	SSMR3PutU8(pSSMHandle, s->read_state);
720	SSMR3PutU8(pSSMHandle, s->write_state);
721	SSMR3PutU8(pSSMHandle, s->write_latch);
722	SSMR3PutU8(pSSMHandle, s->rw_mode);
723	SSMR3PutU8(pSSMHandle, s->mode);
724	SSMR3PutU8(pSSMHandle, s->bcd);
725	SSMR3PutU8(pSSMHandle, s->gate);
726	SSMR3PutU64(pSSMHandle, s->count_load_time);
727	SSMR3PutU64(pSSMHandle, s->u64NextTS);
728	SSMR3PutU64(pSSMHandle, s->u64ReloadTS);
729	SSMR3PutS64(pSSMHandle, s->next_transition_time);
730	if (s->CTXSUFF(pTimer))
731	TMR3TimerSave(s->CTXSUFF(pTimer), pSSMHandle);
732	}
733
734	SSMR3PutS32(pSSMHandle, pData->speaker_data_on);
735	#ifdef FAKE_REFRESH_CLOCK
736	return SSMR3PutS32(pSSMHandle, pData->dummy_refresh_clock);
737	#else
738	return SSMR3PutS32(pSSMHandle, 0);
739	#endif
740	}
741
742
743	/**
744	* Loads a saved programmable interval timer device state.
745	*
746	* @returns VBox status code.
747	* @param pDevIns The device instance.
748	* @param pSSMHandle The handle to the saved state.
749	* @param u32Version The data unit version number.
750	*/
751	static DECLCALLBACK(int) pitLoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle, uint32_t u32Version)
752	{
753	PITState pData = PDMINS2DATA(pDevIns, PITState );
754	unsigned i;
755
756	if (u32Version != PIT_SAVED_STATE_VERSION)
757	return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION;
758
759	for (i = 0; i < ELEMENTS(pData->channels); i++)
760	{
761	PITChannelState *s = &pData->channels[i];
762	SSMR3GetU32(pSSMHandle, &s->count);
763	SSMR3GetU16(pSSMHandle, &s->latched_count);
764	SSMR3GetU8(pSSMHandle, &s->count_latched);
765	SSMR3GetU8(pSSMHandle, &s->status_latched);
766	SSMR3GetU8(pSSMHandle, &s->status);
767	SSMR3GetU8(pSSMHandle, &s->read_state);
768	SSMR3GetU8(pSSMHandle, &s->write_state);
769	SSMR3GetU8(pSSMHandle, &s->write_latch);
770	SSMR3GetU8(pSSMHandle, &s->rw_mode);
771	SSMR3GetU8(pSSMHandle, &s->mode);
772	SSMR3GetU8(pSSMHandle, &s->bcd);
773	SSMR3GetU8(pSSMHandle, &s->gate);
774	SSMR3GetU64(pSSMHandle, &s->count_load_time);
775	SSMR3GetU64(pSSMHandle, &s->u64NextTS);
776	SSMR3GetU64(pSSMHandle, &s->u64ReloadTS);
777	SSMR3GetS64(pSSMHandle, &s->next_transition_time);
778	if (s->CTXSUFF(pTimer))
779	{
780	TMR3TimerLoad(s->CTXSUFF(pTimer), pSSMHandle);
781	LogRel(("PIT: mode=%d count=%#x (%u) - %d.%02d Hz (ch=%d) (restore)\n",
782	s->mode, s->count, s->count, PIT_FREQ / s->count, (PIT_FREQ * 100 / s->count) % 100, i));
783	}
784	pData->channels[0].cRelLogEntries = 0;
785	}
786
787	SSMR3GetS32(pSSMHandle, &pData->speaker_data_on);
788	#ifdef FAKE_REFRESH_CLOCK
789	return SSMR3GetS32(pSSMHandle, &pData->dummy_refresh_clock);
790	#else
791	int32_t u32Dummy;
792	return SSMR3GetS32(pSSMHandle, &u32Dummy);
793	#endif
794	}
795
796
797	/**
798	* Device timer callback function.
799	*
800	* @param pDevIns Device instance of the device which registered the timer.
801	* @param pTimer The timer handle.
802	*/
803	static DECLCALLBACK(void) pitTimer(PPDMDEVINS pDevIns, PTMTIMER pTimer)
804	{
805	PITState pData = PDMINS2DATA(pDevIns, PITState );
806	PITChannelState *s = &pData->channels[0];
807	STAM_PROFILE_ADV_START(&s->CTXSUFF(pPit)->StatPITHandler, a);
808	pit_irq_timer_update(s, s->next_transition_time);
809	STAM_PROFILE_ADV_STOP(&s->CTXSUFF(pPit)->StatPITHandler, a);
810	}
811
812
813	/**
814	* Relocation notification.
815	*
816	* @returns VBox status.
817	* @param pDevIns The device instance data.
818	* @param offDelta The delta relative to the old address.
819	*/
820	static DECLCALLBACK(void) pitRelocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta)
821	{
822	PITState pData = PDMINS2DATA(pDevIns, PITState );
823	unsigned i;
824	LogFlow(("pitRelocate: \n"));
825
826	for (i = 0; i < ELEMENTS(pData->channels); i++)
827	{
828	PITChannelState *pCh = &pData->channels[i];
829	if (pCh->pTimerHC)
830	pCh->pTimerGC = TMTimerGCPtr(pCh->pTimerHC);
831	pData->channels[i].pPitGC = PDMINS2DATA_GCPTR(pDevIns);
832	}
833	}
834
835	/** @todo remove this! */
836	static DECLCALLBACK(void) pitInfo(PPDMDEVINS pDevIns, PCDBGFINFOHLP pHlp, const char *pszArgs);
837
838	/**
839	* Reset notification.
840	*
841	* @returns VBox status.
842	* @param pDevIns The device instance data.
843	*/
844	static DECLCALLBACK(void) pitReset(PPDMDEVINS pDevIns)
845	{
846	PITState pData = PDMINS2DATA(pDevIns, PITState );
847	unsigned i;
848	LogFlow(("pitReset: \n"));
849
850	for (i = 0; i < ELEMENTS(pData->channels); i++)
851	{
852	PITChannelState *s = &pData->channels[i];
853
854	#if 1 /* Set everything back to virgin state. (might not be strictly correct) */
855	s->latched_count = 0;
856	s->count_latched = 0;
857	s->status_latched = 0;
858	s->status = 0;
859	s->read_state = 0;
860	s->write_state = 0;
861	s->write_latch = 0;
862	s->rw_mode = 0;
863	s->bcd = 0;
864	#endif
865	s->cRelLogEntries = 0;
866	s->mode = 3;
867	s->gate = (i != 2);
868	pit_load_count(s, 0);
869	}
870	}
871
872
873	/**
874	* Info handler, device version.
875	*
876	* @param pDevIns Device instance which registered the info.
877	* @param pHlp Callback functions for doing output.
878	* @param pszArgs Argument string. Optional and specific to the handler.
879	*/
880	static DECLCALLBACK(void) pitInfo(PPDMDEVINS pDevIns, PCDBGFINFOHLP pHlp, const char *pszArgs)
881	{
882	PITState pData = PDMINS2DATA(pDevIns, PITState );
883	unsigned i;
884	for (i = 0; i < ELEMENTS(pData->channels); i++)
885	{
886	const PITChannelState *pCh = &pData->channels[i];
887
888	pHlp->pfnPrintf(pHlp,
889	"PIT (i8254) channel %d status: irq=%#x\n"
890	" count=%08x" " latched_count=%04x count_latched=%02x\n"
891	" status=%02x status_latched=%02x read_state=%02x\n"
892	" write_state=%02x write_latch=%02x rw_mode=%02x\n"
893	" mode=%02x bcd=%02x gate=%02x\n"
894	" count_load_time=%016RX64 next_transition_time=%016RX64\n"
895	" u64ReloadTS=%016RX64 u64NextTS=%016RX64\n"
896	,
897	i, pCh->irq,
898	pCh->count, pCh->latched_count, pCh->count_latched,
899	pCh->status, pCh->status_latched, pCh->read_state,
900	pCh->write_state, pCh->write_latch, pCh->rw_mode,
901	pCh->mode, pCh->bcd, pCh->gate,
902	pCh->count_load_time, pCh->next_transition_time,
903	pCh->u64ReloadTS, pCh->u64NextTS);
904	}
905	#ifdef FAKE_REFRESH_CLOCK
906	pHlp->pfnPrintf(pHlp, "speaker_data_on=%#x dummy_refresh_clock=%#x\n",
907	pData->speaker_data_on, pData->dummy_refresh_clock);
908	#else
909	pHlp->pfnPrintf(pHlp, "speaker_data_on=%#x\n", pData->speaker_data_on);
910	#endif
911	}
912
913
914	/**
915	* Construct a device instance for a VM.
916	*
917	* @returns VBox status.
918	* @param pDevIns The device instance data.
919	* If the registration structure is needed, pDevIns->pDevReg points to it.
920	* @param iInstance Instance number. Use this to figure out which registers and such to use.
921	* The device number is also found in pDevIns->iInstance, but since it's
922	* likely to be freqently used PDM passes it as parameter.
923	* @param pCfgHandle Configuration node handle for the device. Use this to obtain the configuration
924	* of the device instance. It's also found in pDevIns->pCfgHandle, but like
925	* iInstance it's expected to be used a bit in this function.
926	*/
927	static DECLCALLBACK(int) pitConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfgHandle)
928	{
929	PITState pData = PDMINS2DATA(pDevIns, PITState );
930	int rc;
931	uint8_t u8Irq;
932	uint16_t u16Base;
933	bool fSpeaker;
934	bool fGCEnabled;
935	bool fR0Enabled;
936	unsigned i;
937	Assert(iInstance == 0);
938
939	/*
940	* Validate configuration.
941	*/
942	if (!CFGMR3AreValuesValid(pCfgHandle, "Irq\0Base\0Speaker\0GCEnabled\0R0Enabled\0"))
943	return VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES;
944
945	/*
946	* Init the data.
947	*/
948	rc = CFGMR3QueryU8(pCfgHandle, "Irq", &u8Irq);
949	if (rc == VERR_CFGM_VALUE_NOT_FOUND)
950	u8Irq = 0;
951	else if (VBOX_FAILURE(rc))
952	return PDMDEV_SET_ERROR(pDevIns, rc,
953	N_("Configuration error: Querying \"Irq\" as a uint8_t failed"));
954
955	rc = CFGMR3QueryU16(pCfgHandle, "Base", &u16Base);
956	if (rc == VERR_CFGM_VALUE_NOT_FOUND)
957	u16Base = 0x40;
958	else if (VBOX_FAILURE(rc))
959	return PDMDEV_SET_ERROR(pDevIns, rc,
960	N_("Configuration error: Querying \"Base\" as a uint16_t failed"));
961
962	rc = CFGMR3QueryBool(pCfgHandle, "SpeakerEnabled", &fSpeaker);
963	if (rc == VERR_CFGM_VALUE_NOT_FOUND)
964	fSpeaker = true;
965	else if (VBOX_FAILURE(rc))
966	return PDMDEV_SET_ERROR(pDevIns, rc,
967	N_("Configuration error: Querying \"SpeakerEnabled\" as a bool failed"));
968
969	rc = CFGMR3QueryBool(pCfgHandle, "GCEnabled", &fGCEnabled);
970	if (rc == VERR_CFGM_VALUE_NOT_FOUND)
971	fGCEnabled = true;
972	else if (VBOX_FAILURE(rc))
973	return PDMDEV_SET_ERROR(pDevIns, rc,
974	N_("Configuration error: Querying \"GCEnabled\" as a bool failed"));
975
976	rc = CFGMR3QueryBool(pCfgHandle, "R0Enabled", &fR0Enabled);
977	if (rc == VERR_CFGM_VALUE_NOT_FOUND)
978	fR0Enabled = true;
979	else if (VBOX_FAILURE(rc))
980	return PDMDEV_SET_ERROR(pDevIns, rc,
981	N_("Configuration error: failed to read R0Enabled as boolean"));
982
983	pData->pDevIns = pDevIns;
984	pData->channels[0].irq = u8Irq;
985	for (i = 0; i < ELEMENTS(pData->channels); i++)
986	{
987	pData->channels[i].pPitHC = pData;
988	pData->channels[i].pPitGC = PDMINS2DATA_GCPTR(pDevIns);
989	}
990
991	/*
992	* Create timer, register I/O Ports and save state.
993	*/
994	rc = PDMDevHlpTMTimerCreate(pDevIns, TMCLOCK_VIRTUAL_SYNC, pitTimer, "i8254 Programmable Interval Timer",
995	&pData->channels[0].CTXSUFF(pTimer));
996	if (VBOX_FAILURE(rc))
997	{
998	AssertMsgFailed(("pfnTMTimerCreate -> %Vrc\n", rc));
999	return rc;
1000	}
1001
1002	rc = PDMDevHlpIOPortRegister(pDevIns, u16Base, 4, NULL, pitIOPortWrite, pitIOPortRead, NULL, NULL, "i8254 Programmable Interval Timer");
1003	if (VBOX_FAILURE(rc))
1004	return rc;
1005	if (fGCEnabled)
1006	{
1007	rc = PDMDevHlpIOPortRegisterGC(pDevIns, u16Base, 4, 0, "pitIOPortWrite", "pitIOPortRead", NULL, NULL, "i8254 Programmable Interval Timer");
1008	if (VBOX_FAILURE(rc))
1009	return rc;
1010	}
1011	if (fR0Enabled)
1012	{
1013	rc = PDMDevHlpIOPortRegisterR0(pDevIns, u16Base, 4, 0, "pitIOPortWrite", "pitIOPortRead", NULL, NULL, "i8254 Programmable Interval Timer");
1014	if (VBOX_FAILURE(rc))
1015	return rc;
1016	}
1017
1018	if (fSpeaker)
1019	{
1020	rc = PDMDevHlpIOPortRegister(pDevIns, 0x61, 1, NULL, pitIOPortSpeakerWrite, pitIOPortSpeakerRead, NULL, NULL, "PC Speaker");
1021	if (VBOX_FAILURE(rc))
1022	return rc;
1023	if (fGCEnabled)
1024	{
1025	rc = PDMDevHlpIOPortRegisterGC(pDevIns, 0x61, 1, 0, NULL, "pitIOPortSpeakerRead", NULL, NULL, "PC Speaker");
1026	if (VBOX_FAILURE(rc))
1027	return rc;
1028	}
1029	}
1030
1031	rc = PDMDevHlpSSMRegister(pDevIns, pDevIns->pDevReg->szDeviceName, iInstance, PIT_SAVED_STATE_VERSION, sizeof(*pData),
1032	NULL, pitSaveExec, NULL,
1033	NULL, pitLoadExec, NULL);
1034	if (VBOX_FAILURE(rc))
1035	return rc;
1036
1037	/*
1038	* Initialize the device state.
1039	*/
1040	pitReset(pDevIns);
1041
1042	/*
1043	* Register statistics and debug info.
1044	*/
1045	PDMDevHlpSTAMRegister(pDevIns, &pData->StatPITIrq, STAMTYPE_COUNTER, "/TM/PIT/Irq", STAMUNIT_OCCURENCES, "The number of times a timer interrupt was triggered.");
1046	PDMDevHlpSTAMRegister(pDevIns, &pData->StatPITHandler, STAMTYPE_PROFILE, "/TM/PIT/Handler", STAMUNIT_TICKS_PER_CALL, "Profiling timer callback handler.");
1047
1048	PDMDevHlpDBGFInfoRegister(pDevIns, "pit", "Display PIT (i8254) status. (no arguments)", pitInfo);
1049
1050	return VINF_SUCCESS;
1051	}
1052
1053
1054	/**
1055	* The device registration structure.
1056	*/
1057	const PDMDEVREG g_DeviceI8254 =
1058	{
1059	/* u32Version */
1060	PDM_DEVREG_VERSION,
1061	/* szDeviceName */
1062	"i8254",
1063	/* szGCMod */
1064	"VBoxDDGC.gc",
1065	/* szR0Mod */
1066	"VBoxDDR0.r0",
1067	/* pszDescription */
1068	"Intel 8254 Programmable Interval Timer (PIT) And Dummy Speaker Device",
1069	/* fFlags */
1070	PDM_DEVREG_FLAGS_HOST_BITS_DEFAULT \| PDM_DEVREG_FLAGS_GUEST_BITS_32_64 \| PDM_DEVREG_FLAGS_PAE36 \| PDM_DEVREG_FLAGS_GC \| PDM_DEVREG_FLAGS_R0,
1071	/* fClass */
1072	PDM_DEVREG_CLASS_PIT,
1073	/* cMaxInstances */
1074	1,
1075	/* cbInstance */
1076	sizeof(PITState),
1077	/* pfnConstruct */
1078	pitConstruct,
1079	/* pfnDestruct */
1080	NULL,
1081	/* pfnRelocate */
1082	pitRelocate,
1083	/* pfnIOCtl */
1084	NULL,
1085	/* pfnPowerOn */
1086	NULL,
1087	/* pfnReset */
1088	pitReset,
1089	/* pfnSuspend */
1090	NULL,
1091	/* pfnResume */
1092	NULL,
1093	/* pfnAttach */
1094	NULL,
1095	/* pfnDetach */
1096	NULL,
1097	/* pfnQueryInterface. */
1098	NULL
1099	};
1100
1101	#endif /* IN_RING3 */
1102	#endif /* !VBOX_DEVICE_STRUCT_TESTCASE */
1103

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/PC/DevPit-i8254.cpp@ 9212

Download in other formats: